Click here to Skip to main content
15,867,568 members
Articles / High Performance Computing / Vectorization
Article

Graphic in XAML and WPF

Rate me:
Please Sign up or sign in to vote.
4.76/5 (18 votes)
6 Jan 2008CPOL12 min read 118.6K   71   2
Graphic in XAML and WPF

Note

This article was originally published on my Web site. All the text and code samples are identical. However, on my Web site you can also see the WPF and Silverlight samples in action. Therefore I invite you to also visit my page after you have read the article here on The Code Project.

Introduction

During the last few weeks, my colleague Karin Huber and I were preparing the foundation of software architects. software architects concentrates on COTS (commercial off-the-shelf) software. However, this is not the theme of this article (if you want to know more about the company, visit our Web site at here or here). In this article, I want to describe the functions of XAML, WPF and Silverlight in the context of graphic. I will use the corporate logo of our new company as the sample for this article because its XAML implementation uses quite a lot of the graphic functions of XAML.

Unfortunately I cannot go into great details in this document. If you are interested in more in-depth information, you can either read about it in the MSDN Library or (if you are able to read German) you can check out our newest book about XAML and WPF:

WPF_und_XAML_Programmierhandbuch.jpg

Here is what I will discuss in this article:

From Inkscape to XAML

If you are a programmer, it is very likely that you have to work together with a design professional whenever it comes to graphic design. In my experience, you get the best results if you start thinking about the content, basic layout and design principles before you hire a design professional. We always try to work out a very basic draft of what we want to have and hand this draft over to our design partners. We experienced that the design results we can achieve ourselves are suboptimal simply because we have studied software development and not design. However, the results are also not the best they could be if you are not able to express what you want when you request the design work. This leads us to two important needs:

  • One member of your software development team should know about the very basic principles of graphic design. He can be the "communication bridge" between the software technicians and the designers.
    Stay tuned with my blog; I will post some book recommendations about design principles for non-designers in a few days.
  • The tools that these people use are quite different from what we, as software developers, use. In the area of graphic design, nearly all of the professionals I know use tools from Adobe (e.g. Adobe Illustrator). You have to find a common denominator for exchanging work with them.

Let us concentrate on the second point for the moment. If you are lucky, you can afford Adobe licenses in your software development team, too. There are XAML exporters and converters for Adobe tools on the Web. Try them and see if they can help you to build the bridge from development to design. However, these tools are extremely powerful and you have to spend some time to learn how to use them.

Another option is the use of the Microsoft pendants: Microsoft Expression Studio. These tools have a similar functional range as the Adobe tools I mentioned before. The problem is that most design professionals I know do not use them by now. Their biggest advantage is that Microsoft's design tools "speak" XAML natively. Their XAML export capabilities are very good! However, just like with Adobe-tools, it will take you a while to get familiar with Expression.

If you work on a low budget project or you want to use a design program that is a bit easier to use (because of less functions) you could get your hands dirty with an open source design tool: Inkscape. I personally like Inkscape very much. One of the beautiful things about Inkscape is its file format: It uses SVG (Scalable Vector Graphics). You could use Inkscape to sketch basic layout ideas and pass the SVG file to your design professionals. You can be sure that they can handle SVG; this file format is nothing strange for them.

Depending on the tools your design professionals use, they can give you back SVG again or they can export XAML directly. If you get SVG back, it is quite easy for you to convert it to XAML. A few months ago, I wrote an article in the German MSDN magazine about how to manually convert SVG paths to XAML paths. In my blog article The world in XAML I summarized the content in English. Jon Galloway did an excellent job describing ways to convert SVG to XAML in his blog.

Even if your designers create bitmap images and do not use vector oriented tools, Inkscape can help. The program has a built in algorithm for vectorizing bitmaps. It is useful, but be prepared for reworking the result of the vectorization process.

Let us take a look at how we lived the process when creating our new logo in XAML. The first thing we did was to think about what we wanted. The name of the company was defined (software architects). We started by defining some basic guidelines about how we want our logo to be designed:

  • We did not want to have a complex clipart. The logo should consist of the company name using an interesting typeface.
  • The name of the company is quite long. Therefore the typeface had to be condensed. Otherwise the ratio of width and height would have been strange.
  • ...

Given these design ideas we looked for a font that could be the basis for our logo. After some research we decided to use a subtype of "ITC Franklin Gothic Book" created by the International Typeface Corporation. We recognized that the last three letters of software and the first three of architects are quite similar and decided that we wanted to use that for a graphical effect. As a result, we gave the following sketch of our logo (SVG built with Inkscape) together with our written ideas to our design professional.

LogoHandSketch2.png

The basic idea we gave to our design professional:

LogoStep1.png

In my opinion this is a great example of what difference design professionals can make. In our case, the designer took our ideas and enhanced it a little bit. He combined the two words a little bit different to make the effect much more interesting:

LogoStep2.png

As the second step, he converted the typeface into paths and changed some letters to create a grid that breaks the logo into different horizontal parts.

LogoStep3.png

Additionally he created an enhanced version of the logo including gradient brushes and a reflection:

LogoStep4v2.png

After a short while, we had the logo in Inkscape (SVG format) as a vector graphic:

LogoInInkscape.png

From that point on, we were back in our original profession - CODE. In the SVG file, we had all the path expressions of our logo ready to be copied out. We could use them without any change in XAML. Here is an example of a path expression in SVG:

SvgPath.png

As you can see, the path is defined using a mini-language in which all points, lines and curves are specified. This mini-language is very, very similar between XAML and SVG. Usually you can copy the paths from SVG to XAML without any change. You can find detailed information about path specifications in SVG at W3C and about paths in XAML in Microsoft's MSDN Library.

Shapes and Drawing Objects

The next step is the implementation of the logo in XAML. In XAML, you have two possibilities for how to specify graphic objects: You can either use the classes derived from Shape (e.g. Rectangle, Ellipse, etc.) or you use Drawing Objects (classes derived from Drawing). The following UML class diagram from our book "XAML und WPF Programmierhandbuch" shows the inheritance tree of 2D graphic-related classes in WPF:

Figure_7_10_WPF_und_XAML.png
XAML und WPF Programmierhandbuch
Figure 7.10, Page 442

The main differences between Shapes and Drawing Objects are:

  • Shapes are Framework Elements. Because of that, you can use them in your user interface just like any other control (e.g. Button, TextBox, etc.). They are also derived from Visual. Therefore, they know themselves how to render them.
  • Drawing Objects are not Framework Elements! They are Freezables (derived from Freezable). Therefore they can be set into a read-only state. With this, you can significantly enhance performance. However, Freezables in ready-only state cannot be modified using animations or data bindings. This leads to the conclusion that you should only "freeze" Freezables if they represent static graphics without changes during runtime.
  • Drawing Objects are no Visuals! To display Drawing Objects, you need a Framework Element helper object. The following figure shows this relationship:
Figure_7_27_WPF_und_XAML.png
XAML und WPF Programmierhandbuch
Figure 7.27, Page 467

At first glance, Geometries (objects derived from Geometry) seem to be similar to Shapes. Actually they are quite different. Geometries do not represent graphical objects that are ready to be displayed on the screen. They just specify the shape of an object.

In our case, it makes sense to use Drawing Objects to implement the logo because it is a relatively static graphical object. Here is the XAML code for the basic shapes of the logo. Note the namespace declaration for PresentationOptions. You need this to be able to freeze Freezables.

XML
<Page
  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
  xmlns:PresentationOptions=
        "http://schemas.microsoft.com/winfx/2006/xaml/presentation/options"
  xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
  mc:Ignorable="PresentationOptions" >

We put the logo into the page's resource collection. Thus the logo could easily be extracted into a separate XAML file (e.g. App.xaml or another file).

XML
<Page.Resources>

Here, you can see the declaration of the two graphic objects ("software" and "architects"). Note that we use frozen Drawing objects. You should also take a look at how we combine multiple PathGeometry-objects using GeometryGroup. I will go into details concerning this class later.

XML
<!-- ****** SOFTWARE ******************************************* -->
<!-- Geometry for the word "software" -->
<GeometryGroup x:Key="LogoSoftware"
  PresentationOptions:Freeze="True" >
  <PathGeometry Figures="M 0.31163807,145.75739 ... z" />
  <PathGeometry Figures="M 70.074606,115.57876 ... z" />
  <PathGeometry Figures="M 173.53291,0.40830421 ... z" />
  <PathGeometry Figures="M 307.03223,184.21003 ... z" />
  <PathGeometry Figures="M 391.22711,96.183574 ... z" />
  <PathGeometry Figures="M 426.25331,184.22683 ... z" />
  <PathGeometry Figures="M 501.63047,145.55673 ... z" />
</GeometryGroup>

<!-- ****** ARCHITECTS **************************************** -->
<!-- Geometry for the word "architects" -->
<GeometryGroup x:Key="LogoArchitects"
  PresentationOptions:Freeze="True" >
  <PathGeometry Figures="M 391.29841,156.18357 ... z" />
  <PathGeometry Figures="M 426.35415,242.80498 ... z" />
  <PathGeometry Figures="M 590.3878,242.94013 ... z" />
  <PathGeometry Figures="M 625.36802,242.94013 ... z" />
  <PathGeometry Figures="M 682.10338,226.72431 ... z" />
  <PathGeometry Figures="M 735.83215,206.36345 ... z" />
  <PathGeometry Figures="M 502.24129,206.22951 ... z" />
  <PathGeometry Figures="M 805.67431,206.22951 ... z" />
  <PathGeometry Figures="M 869.59918,226.66181 ... z" />
  <PathGeometry Figures="M 873.62206,206.17249 ... z" />
</GeometryGroup>

Here we define the gradient brushes used in the logo.

XML
<!-- ****** BRUSHES ******************************************* -->
<!-- Brush for the word "software" -->
<LinearGradientBrush x:Key="SoftwareBrush" StartPoint="0,1"
  EndPoint="0,0" PresentationOptions:Freeze="True">
  <GradientStop Color="#76ba52" Offset="0.0" />
  <GradientStop Color="#c0dd89" Offset="1.0" />
</LinearGradientBrush>
<!-- Brush for the word "architects" -->
<LinearGradientBrush x:Key="ArchitectsBrush" StartPoint="0,1"
  EndPoint="0,0" PresentationOptions:Freeze="True">
  <GradientStop Color="#264da6" Offset="0.0" />
  <GradientStop Color="#15306c" Offset="1.0" />
</LinearGradientBrush>

As we said before, Drawing Objects needs a Framework Element helper to display them on the screen. In our case, the class Image is used for that. Image needs a descendant of ImageSource as the source of the image. For this reason we provide a DrawingImage-object (DrawingImage derives from ImageSource) in the resource dictionary.

XML
  <!-- ****** LOGO ********************************************** -->
  <DrawingImage x:Key="SoftwareArchitectsLogo"
    PresentationOptions:Freeze="True" >
    <DrawingImage.Drawing>
      <DrawingGroup>
        <GeometryDrawing Brush="{StaticResource SoftwareBrush}"
          Geometry="{StaticResource LogoSoftware}" />
        <GeometryDrawing Brush="{StaticResource ArchitectsBrush}"
          Geometry="{StaticResource LogoArchitects}" />
      </DrawingGroup>
    </DrawingImage.Drawing>
  </DrawingImage>
</Page.Resources>

Three lines of code are enough to display the logo in any WPF window or page. Everything else is defined in the resources.

XML
  <Canvas>
    <Image Source="{StaticResource SoftwareArchitectsLogo}" />
  </Canvas>

</Page>

Here, you can see the logo implemented with the code shown above in XAMLPad. XAMLPad is a small tool with which you can prototype your XAML code. It is included in the free Windows SDK.

LogoInXamlPad.png

Combining Geometry Objects

In WPF you have two possibilities to combine Geometries. You can either group them in a collection as shown in the code above. In this case, you use the class GeometryGroup. Be aware that GeometryGroup is really just a collection and nothing more. If you want to build a completely new Geometry by combining two others (e.g. intersection, union, etc.) you have to use CombinedGeometry instead.

In our case, we use a combination of two Geometries to create the solid color bottom of the word "software". The goal is not to create separate paths for this area of the logo. Instead we want to build on the previously declared path and exclude the gray rectangle (see picture below) from it.

LogoDarkBottom.png

XML
<Page.Resources>
  [...]

Note how we reference the existing Geometry of the word "software" by using the StaticResource-Markup extension.

XML
  <!-- Geometry for the dark area at the bottom of the letters
       of the word "software" -->
  <CombinedGeometry x:Key="LogoSoftwareBottomShape"
    GeometryCombineMode="Exclude"
    Geometry1="{StaticResource LogoSoftware}"
    PresentationOptions:Freeze="True">
    <CombinedGeometry.Geometry2>
      <RectangleGeometry Rect="0,0,519,145" />
    </CombinedGeometry.Geometry2>
  </CombinedGeometry>
  [...]

  <!-- Brush for the dark area at the bottom of the letters
       of the word "software" -->
  <SolidColorBrush x:Key="SoftwareBottomShapeBrush"
    Color="#76BA52" PresentationOptions:Freeze="True" />

  [...]

  <!-- ****** LOGO ********************************************** -->
  <DrawingImage x:Key="SoftwareArchitectsLogo"
    PresentationOptions:Freeze="True" >
    <DrawingImage.Drawing>
      <DrawingGroup>
        <GeometryDrawing Brush="{StaticResource SoftwareBrush}"
          Geometry="{StaticResource LogoSoftware}" />
        <GeometryDrawing
          Brush="{StaticResource SoftwareBottomShapeBrush}"
          Geometry="{StaticResource LogoSoftwareBottomShape}" />
        <GeometryDrawing Brush="{StaticResource ArchitectsBrush}"
          Geometry="{StaticResource LogoArchitects}" />
      </DrawingGroup>
    </DrawingImage.Drawing>
  </DrawingImage>

</Page.Resources>

Transformation Objects

The last piece that is missing to complete the logo is the reflection effect of the two words. The effect can be created by flipping them on the Y axis. For such cases, WPF offers the class Transform. The library contains various descendent classes of Transform with which you can create different effects. The following figure gives an overview about what is there for your use:

Figure_7_39_WPF_und_XAML.png
XAML und WPF Programmierhandbuch
Figure 7.39, Page 484

In our case, we do not only use a Transform-object. Additionally we use CombinedGeometry to truncate the mirrored words. If we would not do that, objects that follow the logo horizontally would show a strange distance from the logo.

XML
<Page.Resources>
  [...]

  <!-- Geometry for the mirror-effect of the word "software" -->
  <CombinedGeometry x:Key="LogoSoftwareMirror"
    GeometryCombineMode="Exclude"
    PresentationOptions:Freeze="True">
    <CombinedGeometry.Geometry1>
      <GeometryGroup>
        <PathGeometry Figures="M 0.31163807,145.75739 ... z" />
        <PathGeometry Figures="M 70.074606,115.57876 ... z" />
        <PathGeometry Figures="M 173.53291,0.40830421 ... z" />
        <PathGeometry Figures="M 307.03223,184.21003 ... z" />
        <PathGeometry Figures="M 391.22711,96.183574 ... z" />
        <PathGeometry Figures="M 426.25331,184.22683 ... z" />
        <PathGeometry Figures="M 501.63047,145.55673 ... z" />
      </GeometryGroup>
    </CombinedGeometry.Geometry1>
    <CombinedGeometry.Geometry2>
      <RectangleGeometry Rect="0,0,519,145" />
    </CombinedGeometry.Geometry2>

You can apply a transformation by assigning the appropriate descendent class of Transform to the Transform-property of the object you want to change.

XML
    <CombinedGeometry.Transform>
      <TransformGroup>
        <ScaleTransform CenterY="184" ScaleY="-1" />
      </TransformGroup>
    </CombinedGeometry.Transform>
  </CombinedGeometry>
  [...]


  <!-- Geometry for the mirror-effect of the word "architects" -->
  <CombinedGeometry x:Key="LogoArchitectsMirror"
    GeometryCombineMode="Exclude"
    PresentationOptions:Freeze="True">
    <CombinedGeometry.Geometry1>
      <GeometryGroup PresentationOptions:Freeze="True" >
        <PathGeometry .../>
        [...]
      </GeometryGroup>
    </CombinedGeometry.Geometry1>
    <CombinedGeometry.Geometry2>
      <RectangleGeometry Rect="330,0,604,206" />
    </CombinedGeometry.Geometry2>
    <CombinedGeometry.Transform>
      <TransformGroup>
        <ScaleTransform CenterY="243" ScaleY="-1" />
      </TransformGroup>
    </CombinedGeometry.Transform>
  </CombinedGeometry>
  [...]

  <!-- Brush for the mirror-effect of the word "software" -->
  <LinearGradientBrush x:Key="SoftwareMirrorBrush" StartPoint="0,1"
    EndPoint="0,0" PresentationOptions:Freeze="True">
    <GradientStop Color="#0076ba52" Offset="0.4" />
    <GradientStop Color="#60c0dd89" Offset="1.0" />
  </LinearGradientBrush>
  <!-- Brush for the mirror-effect of the word "architects" -->
  <LinearGradientBrush x:Key="ArchitectsMirrorBrush" StartPoint="0,1"
    EndPoint="0,0" PresentationOptions:Freeze="True">
    <GradientStop Color="#00264da6" Offset="0" />
    <GradientStop Color="#3015306c" Offset="1.0" />
  </LinearGradientBrush>
  [...]

  <!-- ****** LOGO ********************************************** -->
  <DrawingImage x:Key="SoftwareArchitectsLogo"
    PresentationOptions:Freeze="True" >
    <DrawingImage.Drawing>
      <DrawingGroup>
        <GeometryDrawing Brush="{StaticResource SoftwareBrush}"
          Geometry="{StaticResource LogoSoftware}" />
        <GeometryDrawing Brush="{StaticResource SoftwareMirrorBrush}"
          Geometry="{StaticResource LogoSoftwareMirror}" />
        <GeometryDrawing
          Brush="{StaticResource SoftwareBottomShapeBrush}"
          Geometry="{StaticResource LogoSoftwareBottomShape}" />
        <GeometryDrawing Brush="{StaticResource ArchitectsBrush}"
          Geometry="{StaticResource LogoArchitects}" />
        <GeometryDrawing Brush="{StaticResource ArchitectsMirrorBrush}"
          Geometry="{StaticResource LogoArchitectsMirror}" />
      </DrawingGroup>
    </DrawingImage.Drawing>
  </DrawingImage>

</Page.Resources>

This is the finished logo with all effects in XAMLPad:

FinishedLogoXAMLPad.png

Differences between WPF and Silverlight

Silverlight is Microsoft's answer to Adobe's Flash. Just like WPF Silverlight uses XAML to specify an object tree that represents the user interface elements. If you know WPF's XAML, it will not be difficult for you to start with Silverlight. Unfortunately Silverlight's XAML does not offer all the functionality you are used to in WPF (we are talking about Silverlight 1.0 (which is the version that currently is RTM) here).

I do not want to give a complete listing of all the differences because you can read that in every detail at Microsoft's Silverlight Dev Center in the MSDN Library. I just want to name the differences that affected us when implementing our logo for the use in Silverlight applications. In contrast to WPF's XAML Silverlight does not...

  • ...have support for resources to the extent WPF has. Silverlight resources just hold Storyboard-objects used for animation.
  • ...know about Freezables.
  • ...support the mini-language for path expressions in PathGeometry. It is just supported in Path.
  • ...know Markup extensions like {StaticResource ...} or {Binding ...}. You have to implement the corresponding functionality yourself using JavaScript.

Here is the source code of an implementation of a simplified version of the logo in Silverlight. You can see how similar the Silverlight version is to the WPF version.

Note that there is no reference related to freezing Freezables in the Silverlight version. Silverlight does not know Freezables.

XML
<Canvas
  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
  xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" >

  <Path x:Name="SoftwarePath"
    Data="M 0.31163807,145.75739 ... z">
    <Path.Fill>
      <LinearGradientBrush StartPoint="0,1" EndPoint="0,0">
        <GradientStop Color="#76ba52" Offset="0.0" />
        <GradientStop Color="#c0dd89" Offset="1.0" />
      </LinearGradientBrush>
    </Path.Fill>
    <Path.RenderTransform>
      <TransformGroup>
        <ScaleTransform ScaleX="0.25" ScaleY="0.25" />
        <TranslateTransform x:Name="SoftwareTranslateAnimation" />
      </TransformGroup>
    </Path.RenderTransform>

For demonstration purposes, we added a small animation here. We used DoubleAnimation-objects to let the logo fly and fade in.

XML
    <Path.Triggers>
      <EventTrigger RoutedEvent="Path.Loaded">
        <BeginStoryboard>
          <Storyboard>
            <DoubleAnimation
              Storyboard.TargetName="SoftwareTranslateAnimation"
              Storyboard.TargetProperty="Y"
              From="-50" To="0" Duration="0:0:0.5" />
            <DoubleAnimation
              Storyboard.TargetName="SoftwarePath"
              Storyboard.TargetProperty="Opacity"
              From="0" To="1" Duration="0:0:0.5" />
          </Storyboard>
        </BeginStoryboard>
      </EventTrigger>
    </Path.Triggers>
  </Path>

  <Path x:Name="ArchitectsPath"
    Data="M 391.29841,156.18357 ... z">
    <Path.Fill>
      <LinearGradientBrush StartPoint="0,1" EndPoint="0,0">
        <GradientStop Color="#264da6" Offset="0.0" />
        <GradientStop Color="#15306c" Offset="1.0" />
      </LinearGradientBrush>
    </Path.Fill>
    <Path.RenderTransform>
      <TransformGroup>
        <ScaleTransform ScaleX="0.25" ScaleY="0.25" />
          <TranslateTransform x:Name="ArchitectsTranslateAnimation" />
      </TransformGroup>
    </Path.RenderTransform>
    <Path.Triggers>
      <EventTrigger RoutedEvent="Path.Loaded">
        <BeginStoryboard>
          <Storyboard>
            <DoubleAnimation
              Storyboard.TargetName="ArchitectsTranslateAnimation"
              Storyboard.TargetProperty="Y"
              From="50" To="0" Duration="0:0:0.5" />
            <DoubleAnimation
              Storyboard.TargetName="ArchitectsPath"
              Storyboard.TargetProperty="Opacity"
              From="0" To="1" Duration="0:0:0.5" />
          </Storyboard>
        </BeginStoryboard>
      </EventTrigger>
    </Path.Triggers>
  </Path>
</Canvas>

Summary

WPF and XAML are great tools to develop next generation Windows applications. In contrast to HTML, you do not need to convert all images you want to use in your WPF application into bitmap images. Just let your design professionals deliver the images in a vector-based format and you will find that it is easy to convert it to XAML.

History

  • 6th January, 2008: Initial post

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
software architects
Austria Austria
Hi, my name is Rainer Stropek. I am living a small city named Traun in Austria. Since 1993 I have worked as a developer and IT consultant focusing on building database oriented solutions. After being a freelancer for more than six years I founded a small IT consulting company together with some partners in 1999. In 2007 my friend Karin and I decided that we wanted to build a business based on COTS (component off-the-shelf) software. As a result we founded "software architects" and developed the time tracking software "time cockpit" (http://www.timecockpit.com). If you want to know more about our companies check out my blogs at http://www.software-architects.com and http://www.timecockpit.com or take a look at my profile in XING (http://www.openbc.com/hp/Rainer_Stropek2/).

I graduated the Higher Technical School for MIS at Leonding (A) in 1993. After that I started to study MIS at the Johannes Kepler University Linz (A). Unfortunately I had to stop my study because at that time it was incompatible with my work. In 2005 I finally finished my BSc (Hons) in Computing at the University of Derby (UK). Currently I focus on IT consulting, development, training and giving speeches in the area of .NET and WPF, SQL Server and Data Warehousing.

Comments and Discussions

 
QuestionDynamic geometry? Pin
Diamonddrake13-Jun-14 17:16
Diamonddrake13-Jun-14 17:16 
GeneralMy vote of 5 Pin
sgunasekhar17-Mar-13 22:35
sgunasekhar17-Mar-13 22:35 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.