Click here to Skip to main content
16,019,983 members
Articles / Security

Simplified version of the DES (Data Encryption Standard) in C#

Rate me:
Please Sign up or sign in to vote.
4.79/5 (13 votes)
5 Jul 2010CPOL6 min read 160.7K   13.2K   30   11
Implementing a simplified version of the DES block cipher algorithm – which was the standard encryption algorithm before the AES, using C# to encrypt and decrypt binary files.

Introduction

The Data Encryption Standard (DES) is a block cipher (a form of shared secret encryption) that was selected by the National Bureau of Standards as an official Federal Information Processing Standard (FIPS) for the United States in 1976 and which has subsequently enjoyed widespread use internationally. It is based on a symmetric-key algorithm that uses a 56-bit key. The algorithm was initially controversial with classified design elements, a relatively short key length, and suspicions about a National Security Agency (NSA) backdoor. DES consequently came under intense academic scrutiny, which motivated the modern understanding of block ciphers and their cryptanalysis.

DES is now considered to be insecure for many applications. This is chiefly due to the 56-bit key size being too small; in January 1999, distributed.net and the Electronic Frontier Foundation collaborated to publicly break a DES key in 22 hours and 15 minutes. There are also some analytical results which demonstrate theoretical weaknesses in the cipher, although they are infeasible to mount in practice. The algorithm is believed to be practically secure in the form of Triple DES, although theoretical attacks are possible. In recent years, the cipher has been superseded by the Advanced Encryption Standard (AES).

Furthermore, DES has been withdrawn as a standard by the National Institute of Standards and Technology (formerly the National Bureau of Standards). [Wikipedia]

Simplified DES, developed by Professor Edward Schaefer of Santa Clara University, is an educational rather than a secure encryption algorithm. It has similar properties and structure to DES, with much smaller parameters.

In this article, we will use SDES to encrypt and decrypt binary files.

Background

Figure C.1 illustrates the overall structure of the simplified DES, which we will refer to as SDES. The S-DES encryption algorithm takes an 8-bit block of plaintext (example: 10111101) and a 10-bit key as input, and produces an 8-bit block of ciphertext as output. The S-DES decryption algorithm takes an 8-bit block of ciphertext and the same 10-bit key used to produce that ciphertext as input, and produces the original 8-bit block of plaintext.

Image 1

The encryption algorithm involves five functions: an initial permutation (IP); a complex function labeled fK, which involves both permutation and substitution operations and depends on a key input; a simple permutation function that switches (SW) the two halves of the data; the function fK again; and finally, a permutation function that is the inverse of the initial permutation (IP-1). The use of multiple stages of permutation and substitution results in a more complex algorithm, which increases the difficulty of cryptanalysis. The function fK takes as input not only the data passing through the encryption algorithm, but also an 8-bit key. The algorithm could have been designed to work with a 16-bit key, consisting of two 8-bit subkeys, one used for each occurrence of fK. Alternatively, a single 8-bit key could have been used, with the same key used twice in the algorithm. A compromise is to use a 10-bit key from which two 8-bit subkeys are generated, as depicted in Figure C.1. In this case, the key is first subjected to a permutation (P10). Then a shift operation is performed. The output of the shift operation then passes through a permutation function that produces an 8-bit output (P8) for the first subkey (K1). The output of the shift operation also feeds into another shift and another instance of P8 to produce the second subkey (K2). We can concisely express the encryption algorithm as a composition of functions:

Image 2

Using the Code

Step 1: S-DES Key Generation

S-DES depends on the use of a 10-bit key shared between the sender and the receiver. From this key, two 8-bit subkeys are produced for use in particular stages of the encryption and decryption algorithm. The above figure depicts the stages followed to produce the subkeys. First, permute the key in the following fashion. Let the 10-bit key be designated as (k1, k2, k3, k4, k5, k6, k7, k8, k9, k10). Then the permutation P10 is defined as: P10(k1, k2, k3, k4, k5, k6, k7, k8, k9, k10) = (k3, k5, k2, k7, k4, k10, k1, k9, k8, k6).

C#
176          //generates  permated array P10
177          BitArray P10(BitArray key)
178          {
179              //0 1 2 3 4 5 6 7 8 9
180              //2 4 1 6 3 9 0 8 7 5
181              BitArray permutatedArray = new BitArray(10);
182  
183              permutatedArray[0] = key[2];
184              permutatedArray[1] = key[4];
185              permutatedArray[2] = key[1];
186              permutatedArray[3] = key[6];
187              permutatedArray[4] = key[3];
188              permutatedArray[5] = key[9];
189              permutatedArray[6] = key[0];
190              permutatedArray[7] = key[8];
191              permutatedArray[8] = key[7];
192              permutatedArray[9] = key[5];
193  
194              return permutatedArray;
195          }

Next, we apply P8, which picks out and permutes 8 of the 10 bits according to the following:

rule:  P8
P8(1 2 3 4 5 6 7 8 9 10) = (6 3 7 4 8 5 10 9 )

We then go back to the pair of 5-bit strings produced by the two LS-1 functions and perform a circular left shift of 2 bit positions on each string.

C#
289          BitArray Circular_left_shift(BitArray a, int bitNumber)
290          {
291              BitArray shifted = new BitArray(a.Length);
292              int index = 0;
293              for (int i = bitNumber; index < a.Length; i++)
294              {
295                  shifted[index++] = a[i%a.Length]; 
296              }
297              return shifted;
298          }
299 

Step 2: S-DES Encryption

2.a Initial and Final Permutations

The input to the algorithm is an 8-bit block of plaintext, which we first permute using the IP function: IP(1 2 3 4 5 6 7 8) = (2 6 3 1 4 8 5 7).

C#
251          //generates permuted text IP
252          BitArray IP(BitArray plainText)
253          {
254              //0 1 2 3 4 5 6 7
255              //1 5 2 0 3 7 4 6
256              BitArray permutatedArray = new BitArray(8);
257  
258              permutatedArray[0] = plainText[1];
259              permutatedArray[1] = plainText[5];
260              permutatedArray[2] = plainText[2];
261              permutatedArray[3] = plainText[0];
262              permutatedArray[4] = plainText[3];
263              permutatedArray[5] = plainText[7];
264              permutatedArray[6] = plainText[4];
265              permutatedArray[7] = plainText[6];
266  
267              return permutatedArray;
268          }

This retains all 8 bits of the plaintext, but mixes them up. At the end of the algorithm, the inverse permutation is used: IP inverse(1 2 3 4 5 6 7 8) = (4 1 3 5 7 2 8 6).

C#
270          BitArray RIP(BitArray permutedText)
271          {
272              //0 1 2 3 4 5 6 7 
273              //3 0 2 4 6 1 7 5
274  
275              BitArray permutatedArray = new BitArray(8);
276  
277              permutatedArray[0] = permutedText[3];
278              permutatedArray[1] = permutedText[0];
279              permutatedArray[2] = permutedText[2];
280              permutatedArray[3] = permutedText[4];
281              permutatedArray[4] = permutedText[6];
282              permutatedArray[5] = permutedText[1];
283              permutatedArray[6] = permutedText[7];
284              permutatedArray[7] = permutedText[5];
285  
286              return permutatedArray;
287          }
2.b The Function fK

The most complex component of S-DES is the function fK, which consists of a combination of permutation and substitution functions. The functions can be expressed as follows. Let L and R be the leftmost 4 bits and rightmost 4 bits of the 8-bit input to fK, and let F be a mapping (not necessarily one to one) from 4-bit strings to 4-bit strings. Then we let:

Image 3

C#
337          BitArray Fk(BitArray IP, BitArray key)
338          {
339              BitArray[] temp = Split_Block(IP);
340              BitArray Left = Xor(temp[0], F(temp[1], key));
341              BitArray joined = new BitArray(8);
342              int index = 0;
343              for (int i = 0; i < 4; i++)
344              {
345                  joined[index++] = Left[i];
346              }
347              for (int i = 0; i < 4; i++)
348              {
349                  joined[index++] = temp[1][i];
350              }
351              return joined;
352          }

Image 4

C#
232          BitArray EP(BitArray input)
233          {
234              //0 1 2 3
235              //4 1 2 3 2 3 4 1
236              //3 0 1 2 1 2 3 0
237              BitArray permutatedArray = new BitArray(8);
238  
239              permutatedArray[0] = input[3];
240              permutatedArray[1] = input[0];
241              permutatedArray[2] = input[1];
242              permutatedArray[3] = input[2];
243              permutatedArray[4] = input[1];
244              permutatedArray[5] = input[2];
245              permutatedArray[6] = input[3];
246              permutatedArray[7] = input[0];
247  
248              return permutatedArray;
249          }
2.c The S-box

The first 4 bits (first row of the preceding matrix) are fed into the S-box S0 to produce a 2-bit output, and the remaining 4 bits (second row) are fed into S1 to produce another 2-bit output. These two boxes are defined as follows:

Image 5

The S-boxes operate as follows. The first and fourth input bits are treated as a 2-bit number that specify a row of the S-box, and the second and third input bits specify a column of the Sbox. The entry in that row and column, in base 2, is the 2-bit output.

C#
318          BitArray S_Boxes(BitArray input, int no)
319          {
320              BitArray[,] current_S_Box;
321  
322              if (no == 1)
323                  current_S_Box = S_Box1;
324              else
325                  current_S_Box = S_Box2;
326  
327              return current_S_Box[binstr2decimal(bin2str(input[0]) + bin2str(input[3])),
328                  binstr2decimal(bin2str(input[1]) + bin2str(input[2]))];
329          }

Next, the 4 bits produced by S0 and S1 undergo a further permutation as follows: P4(1 2 3 4) = (2 4 3 1).

The output of P4 is the output of the function F.

C#
331          BitArray F(BitArray right, BitArray sk)
332          {
333              BitArray[] temp = Split_Block(Xor(EP(right), sk));
334              return P4(S_Boxes(temp[0], 1), S_Boxes(temp[1], 2));
335          }
2.d The Switch Function

The function fK only alters the leftmost 4 bits of the input. The switch function (SW) interchanges the left and right 4 bits so that the second instance of fK operates on a different 4 bits. In this second instance, the E/P, S0, S1, and P4 functions are the same. The key input is K2.

C#
354          BitArray Switch(BitArray input)
355          {
356              BitArray switched = new BitArray(8);
357              int index = 0;
358              for (int i = 4; index < input.Length; i++)
359              {
360                  switched[index++] = input[i%input.Length];
361              }
362              return switched;
363          }
2.e Finally, Putting Them All in the Encryption and Decryption Process
C#
84          public byte Encrypt(byte block)
85          {
86              BitArray bits_block = byte2bits(block);
87              BitArray[] keys = Generate_Keys();
88              return bits2byte(RIP(Fk(Switch(Fk(IP(bits_block), keys[0])), keys[1])));
89              //ciphertext = IP-1( fK2 ( SW (fK1 (IP (plaintext)))))
90          }
91
92          public byte Decrypt(byte block)
93          {
94              BitArray bits_block = byte2bits(block);
95              BitArray[] keys = Generate_Keys();
96              return bits2byte(RIP(Fk(Switch(Fk(IP(bits_block), keys[1])), keys[0])));
97              //IP-1 ( fK1( SW( fK2( IP(ciphertext)))))
98          }

Step 3: Using S-DES for Encryption and Decryption of Binary Files

3.a Encryption Process
C#
116          private void Encrypt()
117          {
118              FileStream fs = new FileStream(txt_enc_in.Text, FileMode.Open);
119              BinaryReader br = new BinaryReader(fs);
120              FileStream fs2 = new FileStream(txt_enc_out.Text, FileMode.Create);
121              BinaryWriter bwr = new BinaryWriter(fs2);
122              int blocksize = 4 * 1024;
123              int iteration_number;
124              if (fs.Length < blocksize)
125                  iteration_number = 1;
126              else if (fs.Length % blocksize == 0)
127                  iteration_number = (int)fs.Length / blocksize;
128              else
129                  iteration_number = ((int)fs.Length / blocksize) + 1;
130              while (iteration_number-- > 0)
131              {
132                  if (iteration_number == 0)
133                      blocksize = (int)fs.Length % blocksize;
134                  byte[] input = br.ReadBytes(blocksize);
135                  byte[] output = new byte[input.Length];
136                  for (int i = 0; i < output.Length; i++)
137                  {
138                      output[i] = my_Des.Encrypt(input[i]);
139                  }
140                  bwr.Write(output);
141                  bwr.Flush();
142              }
143              bwr.Close();
144              fs2.Close();
145              br.Close();
146              fs.Close();
147          }

Image 6

3.b Decryption Process
C#
149          private void Decrypt()
150          {
151              FileStream fs = new FileStream(txt_dec_in.Text, FileMode.Open);
152              BinaryReader br = new BinaryReader(fs);
153              FileStream fs2 = new FileStream(txt_dec_out.Text, FileMode.Create);
154              BinaryWriter bwr = new BinaryWriter(fs2);
155              int blocksize = 4 * 1024;
156              int iteration_number;
157              if (fs.Length < blocksize)
158                  iteration_number = 1;
159              else if (fs.Length % blocksize == 0)
160                  iteration_number = (int)fs.Length / blocksize;
161              else
162                  iteration_number = ((int)fs.Length / blocksize) + 1;
163              while (iteration_number-- > 0)
164              {
165                  if (iteration_number == 0)
166                      blocksize = (int)fs.Length % blocksize;
167                  byte[] input = br.ReadBytes(blocksize);
168                  byte[] output = new byte[input.Length];
169                  for (int i = 0; i < output.Length; i++)
170                  {
171                      output[i] = my_Des.Decrypt(input[i]);
172                  }
173                  bwr.Write(output);
174                  bwr.Flush();
175              }
176              bwr.Close();
177              fs2.Close();
178              br.Close();
179              fs.Close();
180          }

Image 7

References

  • Cryptography and Network Security, Fourth Edition - William Stallings, Copyright 2006.

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
Engineer
Netherlands Netherlands
A Cloud Ninja, guarding the cyber world, protecting cloud infrastructure from attackers, network from sniffers, source code from vulnerabilities, emails from spams, APIs from bots, data from leakage, workstations from viruses and accounts from weak authentication.

I speak seven languages, two of which are human languages, with a natural translation talent, not just between computer and human but also between technical and business departments.

My professional career started ten years ago when I got challenged to synchronize two databases in a different geographical location without internet. Since then, I play on black screens for living.
Things got interesting when I helped multiple companies migrating from on-premise to the cloud with different configuration automation and many cloud providers.

It was not too soon until I faced my first security problem caused by cloud flexibility and business needs, and here I am.

Comments and Discussions

 
Questionquestion Pin
Member 1313229116-Apr-17 21:39
Member 1313229116-Apr-17 21:39 
BugMaybe an error Pin
lantenne1025-Mar-15 3:25
lantenne1025-Mar-15 3:25 
QuestionHow about 3DES manual impalmentation Pin
mai ciara3-Sep-14 22:50
mai ciara3-Sep-14 22:50 
QuestionAnother question Pin
davoodinthebox31-Oct-12 3:34
davoodinthebox31-Oct-12 3:34 
QuestionWhat about encrypt and decrypt 128-bit block of plain text Pin
davoodinthebox27-Oct-12 23:12
davoodinthebox27-Oct-12 23:12 
AnswerRe: What about encrypt and decrypt 128-bit block of plain text Pin
Jubba Smail28-Oct-12 4:28
Jubba Smail28-Oct-12 4:28 
OK sure,
The SDES.cs class is a generic class which could be used to encrypt/decrypt binary files or plain text.

I will change the two following methods in MainFrm.cs file to suit your needs
C#
private void Encrypt()
private void Decrypt()

The changes as follow, instead of opening the file using the BinaryReader class,

1- I will loop over the plain text "string" and read it char by char
2- convert each char to byte
3- encrypt the byte and append it to byte array
4- finally convert the encrypted bytes to chars again

the code will be:
C#
private void Encrypt()
{
     byte[] output = new byte[txt_enc_in.Text.Length];
     for (int i = 0; i < output.Length; i++)
     {
          output[i] = my_Des.Encrypt(Convert.ToByte(txt_enc_in.Text[i]));
     }
     txt_enc_out.Text = "";
     for (int i = 0; i < output.Length; i++)
     {
          txt_enc_out.Text += Convert.ToChar(output[i]);
     }
 } 


the inverse steps also applied on the Decrypt() method, also some changes should be applied on the GUI.
The final code is available here
GeneralRe: What about encrypt and decrypt 128-bit block of plain text Pin
davoodinthebox28-Oct-12 5:23
davoodinthebox28-Oct-12 5:23 
GeneralRe: What about encrypt and decrypt 128-bit block of plain text Pin
Jubba Smail28-Oct-12 5:40
Jubba Smail28-Oct-12 5:40 
GeneralMy vote of 5 Pin
Ratika Agarwal3-Feb-12 6:23
Ratika Agarwal3-Feb-12 6:23 
GeneralMy vote of 5 Pin
Antoine L. Chou15-Jul-10 11:33
Antoine L. Chou15-Jul-10 11:33 
GeneralMy vote of 5 Pin
draswrtw15-Jul-10 2:45
draswrtw15-Jul-10 2:45 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.