Click here to Skip to main content
15,868,016 members
Articles / Web Development / HTML

Getting Your Features Out

Rate me:
Please Sign up or sign in to vote.
5.00/5 (13 votes)
14 Feb 2014MIT13 min read 33.5K   254   15   8
How to stop believing in "Never change a running system" and going live as often as possible - Branch by Abstraction, Feature Branches and Feature Toggles with FeatureBee

Introduction

When I started developing, change handling was easy. "Never change a running system" worked as a guideline that made sure we developers would release only at specified times (like once a year) to make the release as smooth and easy as possible. Well, unfortunately it hardly ever was that smooth.

Having only a single release a year made it really important to finish your feature until then. If it wasn't 100% complete, well, you had to hope nobody would notice. You'd try to get it out anyway.

As a result, these big bangs were devastating. There were releases where the platform was offline days after the big bang, and we tried to integrate bugfixes for all the things that only showed up on live and were not reproducible on our dev-machines.

A first thing we noticed even back then was, that the bugfix-releases where less chaotic, faster and better then the first big bang release. At the end of a big-bang session, usually after two weeks of pizza, coke and no sleep, we might have released 5-6 times, and each time it went smoother than before.

We ignored that enhancement at first. We needed sleep, some time with our families, and decided that releasing is stupid because it makes us work hard.

Fortunately enough, smarter people than your humble writer, like Jez Humble and David Farley for instance, decided that this is a stupid way to go. They had a new way: Continuous Delivery.

Continuous Delivery (to quote Jez and David on this) “is the practice of releasing every good build to users”<w:sdt id="-900829453" citation="t"> (Humble & Farley, 2010), which means that if you want to go live only once a year, you’d have to either violate your coding guidelines (which usually states something like "deliver good code"), or never commit to the trunk.

It was closely followed by another friend with the word “continuous” in it – Continuous Integration. This requires the dev to (to quote the mastermind of the internet, Wikipedia, on that one) “merge all developer copies with the mainline several times a day”.

Doing this, and having a Continuous Integration pipeline in place, makes it really easy for you to see if a build is good, because it turns green. From releasing once a year, it seems like you are at a point where you’d release a dozen times a day. At least in theory.

In practice you are working on features, and features are hardly ever finished after 10min, but usually after weeks. If you regularly commit all changes for a feature that is not complete to the mainline, your fellow devs, QAs, and automated test suites will most probably hang you for breaking the build all the time.

Image 1

Figure 1: Some features just don't like to be finished in minutes

In the end, you would not get any faster. When working with multiple teams, it might even prevent releasing anything at all, because when multiple teams are working on multiple features, at least one of the features might be in an unstable state.

So let’s take a look into the solutions to this dilemma.

Release in Small Little Steps

This is the best practice solution. You try to plan your story around tasks, which takes at most one day to finish, and show them to the customer immediately. It’s a perfect solution, that in my experience does not work very well for a lot of scenarios in the day-to-day business.

Image 2

Figure 2: I told her to release in small steps, but she just wouldn't listen | (source: Office Royality Free Images)

When working with a product, you will have constraints – dependencies to other teams, upstream/downstream dependencies for which you must wait, marketing stunts for new features that require you to show the new feature at a specific date, or the requirement to test the new feature on a selected group before showing it to everybody.

Branch By Abstraction

Branch by Abstraction is the application pattern with the stupidest name ever, because it might lead to the idea of branches in your version-control which it is not.

The idea behind it is easy – identify your concern, add an abstraction layer between your application and the old stuff that is handling this concern, and implement your new way for this abstraction. Once your new way is implemented, just throw the lever and the new thing is working.

The branch by abstraction pattern is very similar to the Strategy Design Pattern, so you might already have an idea of how to implement it. It is an excellent choice if you have to replace parts of the application, like switching to a new database, moving to the cloud (which might require you to rethink all your local storage thingies) and stuff like that.

The good thing – while you were working on the new implementation, the build was good all the time, even though you integrated to the mainline all the time.

Image 3

Furthermore, this approach gives you the possibility to release in small steps in some scenarios, thus routing all requests that are already implemented by the new approach.

This abstraction layer can help you to enhance your code, by separating concerns and thus introducing a lower coupling and a stronger cohesion.

In most cases however, this additional layer will introduce some unnecessary complexity. If you have no reason to keep this layer (because this part may change again in the future) it is generally a good practice to remove it after the implementation, and directly use the new way. Your code will most probably still be prettier than before, because you had to identify a concern and decouple it.

Feature Branches

Now we are at a point where we actually branch. Feature Branches evolve around the idea that each functional implementation is done in its own branch. The branches are pushed to the central repository, so each feature branch is available for each developer.

Once the implementation is done, the developer starts a pull-request, and the changes are discussed in the team and merged to the master.

Image 4

Figure 3: Feature Branches - They look simple as long as fewer than 200 people are doing it in parallel on one class

This has a lot of advantages – code you are working on does not influence the master, so you can work independently. Additionally, if you are working with a client application, where the binaries are delivered to the customer, this is a very cheap way to ensure the code cannot be activated by the client.

Though you have to make sure that feature-branches are not long-lived. If they are long-lived, and you have a lot of devs/teams with a lot of branches, you may run into a big scary merge again.

As I favor pairing over reviews, I consider the communication required at a pull request as overhead.

Furthermore, and this my personal opinion, it does not automatically force you to decouple your functionality. And enforcing low coupling – high cohesion is something I love.

Feature Toggles

Feature Toggles are basically boolean values for a specified feature-state. What you do is wrapping your new logic into an if-statement, and the old block into the else. It might look like something like this:

C#
if (Feature.IsEnabled(„KillerFeature")) {
    // awesome!
} else {
    // boring…
}

To be honest, this does not look very nice. It seems to cries out: “technical debt”, “testing complexity” and “broken code”.

Now let’s pick the technical debt first. It’s true that by this simple if/else, you create a whole region that is not used by your application. It’s basically unused code, that’s still compiled and shipped.

But it helps you – once the feature is completed – to simply remove everything inside the else (and all the dependencies that were only used inside the else). Thus, code zombies may actually become less in a feature toggled environment - at least in my experience. The technical depth therefore is more a “technical debt credit” you take before starting with the feature, and that you pay back at the end of the feature, with an “all unused code easy to remove” interest earned.

Furthermore, this technical depth allows us to role forward when something went wrong on live, we can just set the feature to false again.

Broken code, the fear that a half-implemented feature would break your productive system, is very real. You need to have tests in place, from Unit over Acceptance to Regression, to make sure no change will ever bring down your system.
However, this is true for every other change you do in code.

The testing complexity was nicely overcome in our first approach to feature toggles: The state of the Feature at AutoScout24, where I first worked with feature toggles, was set in the configuration. This resulted in the following scenario: A feature is on or off, but never both. Which allowed us to limit the impact of the toggle – only one state had to be tested.

The workflow for this setup is like that:

Image 5

Figure 4: It's a nice feeling to block others only for a short time instead of forever

You push code with the toggle value set to true, try to get it through your pipeline, and if it fails you toggle the toggle and won’t block anybody else.

Probably the biggest Pro for Feature Toggles in my opinion is something you can enforce: allow a single feature to be toggled only at one location.

Now why is that a pro? It requires you to question your design, and to separate the concerns to a very explicit level. If you can’t toggle a feature at only one point, the feature is either not a very good user story, or your code has a certain smell to it.

While in the first case, it’s probably too late (because trying to toggle your code means planning is done and you are already doing it), but in the second case you can start refactoring. The strategy pattern is usually a good starting point.

One of the downsides might be that in a client application, you deploy every code to the client, and the client would be able to switch it on or off if he’d ever look into the config. Which might not be what you want for very immature features.

Another downside of featuretoggles is the danger of nesting – you might accidently nest one feature in another one, which introduces a lot of problems and even more complexity; for one, you need to toggle a toggle to see another feature that has nothing to do with it, and testing such a scenario is nasty, I can tell you so much.

In my opinion however, it is worth all the hassle, due to the fact that you can really do continuous integration (by committing every change to the master), continuous delivery (by not breaking everything all the time) and keep your code nice.

Feature Bee

While having our feature state in the configuration was a very safe and convenient way of releasing our features, we found that we had two smells with this configuration:

  1. No Separation of Concerns – SoC: we were doing it wrong. Releasing both code and features with one deployment made us slow. Each time we toggled a toggle, our live-release took longer because a lot of manual work in the form of the acceptance was involved. Furthermore, this tight coupling prevented an automatic deployment to our Production.
    Also, setting up the feature toggles and transforming the configuration was included in our build-pipeline, and also into our regression tests.
  2. PO was not able to do his job – The configuration was with the source code, and while it was only a yaml file, not every PO in the company was consent to edit files in the source repository.
  3. Condition/Claim-Based releases where tricky – AutoScout24 is an international company, with marketplaces in multiple countries – but with one shared codebase (which, by itself is kind of a smell, but that’s another topic).
    Some features are released in smaller countries to a percentage of the users first to test the impact. This is done by Optimizely, which would work with Frontends only. Backend changes, like changing the search indexer, always required manual coding effort.

Image 6

Figure 5: Single Responsibility Principle - we were doing it wrong | (c) http://www.flickr.com/photos/redjar/

To overcome these issues, we had to change our approach to a different setup – together with Philipp, another developer at AutoScout24, I started a new Project called FeatureBee. This project aims to fix the three issues.

In a nutshell, FeatureBee is a single button to release a feature.

Image 7

Figure 6: A button – the Idea behind FeatureBee

In more detail: it’s a Server with an API and a UI, and a lot of clients who ask the server for the status.

Installing the Client in a .NET Application is quite simple – call

Install-Package FeatureBee

in your nuGet console, set the server URL in your configuration and add

C#
FeatureBeeBuilder.ForWebApp().UseConfig();

in your global.asax.cs. A more complete documentation can be found in the github wiki for the project.

The application itself is very intuitive to use – it’s a Board with Post-Its on it:

Image 8

Figure 7: If you ever succeeded in moving a Post-It, you are ready to use FeatureBee

With this simple UI, we introduced a major change in the way we work: While with the configuration, where each environment may have a different feature state, each environment has the same feature state. A second after you move your post-it, the feature is live. A lot of people complained that this is an awfully short period for testing new features.

At first, we thought about simply releasing the feature automatically for all people inside the company, ignoring the state on the board. But then we would have introduced another problem – by decoupling code and feature releases, we would have to validate that each possible feature state is tested – So this required us to think of a way to allow PO, QAs and the automatic tests to switch feature on and off for only themselves to test the feature before switching it on.

We solved this by adding a tray to each of our pages. This tray shows all the features currently available, their state and a button to switch them on or off:

Image 9

Figure 8: Buttons are PO's best friends

This simple implementation changed another thing: we are now discussing if we really need a QA – Environment, because with this tray everybody can do the acceptance on the live system.

Already though it helps us to introduce automatic live-deployments, and thus a more mature continuous deployment.

Bottom Line

At AutoScout24, we are currently using all the approaches presented above, and we try to find the most pragmatic solution for each scenario.

While Feature-Branches allow us to quickly work and share states that are too simple to be toggled, but too complex to be implemented in an hour, we use FeatureToggles/FeatureBee as soon as acceptance is required, we use Branch By Abstraction for every bigger change, and add a toggle for the place where we switch implementations, and “release in small bits” whenever possible.

Join the FeatureBee Team

Feature Bee is the only centralized .NET FeatureToggle Solution we know of. It’s been used in an international organization, and thus is able to handle millions of pageviews per day.

We at AutoScout24 have come to think that a project like this may be interesting for other developers and companies as well, so we added a MIT Licence and put it on gitHub.

Fork it, make your changes, and send pull requests, and we’ll love to take it.

See you when we switch your feature on. ;)

Copyright

Pictures not marked explicitly are created by the author and licensed under MIT.

License

This article, along with any associated source code and files, is licensed under The MIT License


Written By
Software Developer (Senior) AutoScout24 GmbH
Austria Austria
Born, raised and killed by skynet I stopped worrying and started to code my own skynet whose sole purpose it will be to revenge my death by running over the terminator with a bobby car

Comments and Discussions

 
Question“technical depth”? Pin
obiewoncanoli20-Feb-14 16:29
professionalobiewoncanoli20-Feb-14 16:29 
AnswerRe: “technical depth”? Pin
Matthias Kainer28-Feb-14 10:40
professionalMatthias Kainer28-Feb-14 10:40 
GeneralRe: “technical depth”? Pin
obiewoncanoli3-Mar-14 15:42
professionalobiewoncanoli3-Mar-14 15:42 
GeneralRe: “technical depth”? Pin
Matthias Kainer6-Mar-14 19:37
professionalMatthias Kainer6-Mar-14 19:37 
GeneralMy vote of 6 Pin
abdurahman ibn hattab15-Feb-14 7:09
abdurahman ibn hattab15-Feb-14 7:09 
GeneralRe: My vote of 6 Pin
Matthias Kainer16-Feb-14 0:45
professionalMatthias Kainer16-Feb-14 0:45 
GeneralRe: My vote of 6 Pin
Rafael Nicoletti16-Feb-14 11:41
Rafael Nicoletti16-Feb-14 11:41 
GeneralRe: My vote of 6 Pin
Matthias Kainer16-Feb-14 20:12
professionalMatthias Kainer16-Feb-14 20:12 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.