|
Yes, anything is possible. But you would be better contacting the manufacturer's support team for help. It is quite possible they can help with some remote diagnosis.
|
|
|
|
|
Did you take all the "anti-static" precautions?
It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food
|
|
|
|
|
I am trying to access the GPIO of an embedded computer. The device was installed with Windows 10 Pro 20H2 x64 (not my decision). I installed the vendor specific drivers, and the GPIO device is shown with "Intel(R) Serial IO GPIO Host Controller - INT34BB" in the device manager.
I searched the internet and could find a “GpioTestTool” (https://github.com/ms-iot/samples/tree/develop/GpioTestTool) which I could compile on my development machine. After installing “Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019” (“VC_redist.x64.exe”) on the embedded machine, I could start the program.
It shows following error message:
“Error: GPIO is not available on this system”
This error message is also shown when I start the program as an administrator.
That is, the program fails to detect the GPIO.
Can you suggest any tools for trouble shooting?
Oh sanctissimi Wilhelmus, Theodorus, et Fredericus!
|
|
|
|
|
My GLINK USB 2.0 extension cable isn't detecting External Hard Drive, though Pen drive is being detected. Plugging the EHD directly to the USB port of the CPU works fine. Only the extension cable isn't detecting it. How do I make the EHD work with the extension cable now? Or shall I try something else altogether? I'm running on Windows-7 32 bit. May I get some help, please?
Regards,
Priyam
modified 6-Jan-21 12:51pm.
|
|
|
|
|
Hi all,
I am thinking of FPGA for an algorithm of mine, but lack of any experience with FPGAs.
The activity is number crunching, no fancy IO or A/D conversion.
I send a very large number, it crunch, and I get answer as a single number. One can think of it as integer factorization.
Crunching is made of large additions, subtractions, shift operations (*2 and /2), increments/decrements and logical operation and bits testing.
May be an embedded ARM processor to handle communication and data conversion.
Algorithm can be adapted for treading.
It is for hobby, so no real budget.
What hardware/software would you recommend ?
Patrice
“Everything should be made as simple as possible, but no simpler.” Albert Einstein
|
|
|
|
|
Hi,
Im currently making an app on windows forms trying to program a micro over UART. I can achieve it, although it is taking a long time to carry out the program. I have used stopwatches to determine it is my read function taking up the majority of the time. When i try to read the micros response from each command I have to wait for all of it, which is why im using a while loop in the code below, if the returned message size is not what i expect. What im wondering is, if there is any way to speed up this process. The response from the micro should be pretty fast, its running at a baudrate of 115200, meaning the whole 512 kb file should in theory take just over 30 seconds to complete, at the moment it is more than double that, at 80 seconds.
private string CheckResponse(int mSize)
{
string response;
int intBuffer;
intBuffer = ComPort.BytesToRead;
byte[] byteBuffer = new byte[intBuffer];
ComPort.Read(byteBuffer, 0, intBuffer);
response = Encoding.ASCII.GetString(byteBuffer);
while(response.Length != mSize)
{
intBuffer = ComPort.BytesToRead;
byteBuffer = new byte[intBuffer];
ComPort.Read(byteBuffer, 0, intBuffer);
response += Encoding.ASCII.GetString(byteBuffer);
}
return response;
}
Any help greatly appreciated.
Blair
|
|
|
|
|
|
Member 14809996 wrote: The response from the micro should be pretty fast, its running at a baudrate of 115200, meaning the whole 512 kb file should in theory take just over 30 seconds to complete, at the moment it is more than double that, at 80 seconds.
You missed a couple things:
- In serial communications, every byte is preceded by at least a start bit and a stop bit, other settings like parity can add other delay. This make at least 10 bits for a byte transmitted, this make sending 512kB just under 45 secondes at 100% efficient.
- Any operation like reading the 512kB from storage will add delay.
- Any one serious with serial communication, for such a file, will encapsulate the data within a communication protocol to ensure data is not corrupted on the other side. This imply mode data to transmit and some time to ensure data integrity.
So 80 secondes is not that bad.
Patrice
“Everything should be made as simple as possible, but no simpler.” Albert Einstein
|
|
|
|
|
One of my monitors is connected through a Display Port to HDMI adapter. Meaning that the graphics card outputs Display Port and the monitor takes HDMI.
I notice that the quality of the display is rather poor, and there is what looks like ghosting as you would find on an old analog television.
My question is, are there some display port to HDMI adapters that are better than others? Is this why some of them cost three times what others cost?
Or might there be something else wrong?
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Best way is to begin by test with another cable / then test with another screen or tv. You will have more information to search wich part has a problem.
|
|
|
|
|
I have an OV2710 based USB camera (a low-light, as it should go inside a closed box). It is a UVC camera so no need for driver...
Connected the camera to a Win10 laptop - disturbing green shaded image (not fatal but all white/light colors are get greenish)
Connected to a Fedore 31 desktop - same...
Connected to a RPi 2/3/4 using a touchscreen - got a green-only shaded image... The image is clear and fast but green-only...
Anyone has experience with these kind of cameras? I just want to know if there is a way to fix that or should start to search for other camera (any suggestion to that direction is also welcome)..
"The only place where Success comes before Work is in the dictionary." Vidal Sassoon, 1928 - 2012
|
|
|
|
|
I have a new PC, only a few months old. HP Envy Desktop 795 64bit running Windows 10 Pro.
Within the past month or so I am noticing what I can only describe seems to be USB interruptions. Every few minutes the Mouse and Keyboard 'freeze' up. If I'm watching a video it pauses for a second. It happens 2 or 3 times over a few seconds, then doesn't happen again for a dew minutes.
I'm not a hardware guy so I'm in the dark on this. I can provide any additional info if needed.
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
Ya can't fix stupid.
|
|
|
|
|
You'll have to excuse me if I don't click on that link. Judging by the URL, it has absolutely nothing to do with USB issues.
|
|
|
|
|
|
Yeah, I saw that right after I hit Post.
|
|
|
|
|
Hi Gurus,
There has been a requirement to use Gemalto PC PIN Pad device in unsecured mode, Secure Pin Entry (SPE) not active. We have been trying our best to search online for any hint but unfortunately no luck yet. We can't contact Gemalto support because of no formal purchase of device yet (we are in R&D/evaluation phase) as Gemalto is requesting device information formally.
Any hint would be greatly appreciated.
Best Regards,
Asif
Do
Read();
Research();
Experiment();
UnTil You Inspire!
|
|
|
|
|
_Asif_ wrote: Any hint would be greatly appreciated.
Gemalto are the only people who will have the knowledge to help you.
|
|
|
|
|
There's always a company salesman in the middle you need to deal with if it's not on Amazon, etc. That's their job.
It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food
|
|
|
|
|
hello
i need the same as you. We need to be able to use it for loyalty purpose with.
Do you succeed to use it in an unsecure way to be able to get the pin back to a computer ?
thanks
JJ
|
|
|
|
|
Some PCIe devices cannot read more than 4 GB of address space without an additional driver or modified driver. In such cases, what limits how much memory they can read? Is it the memory controller? Is it the firmware of the PCIe device? Or is it something else? I don't think it is because of the device driver itself because PCIe devices can read or write to RAM without a driver. Someone said it is a 32-bit vs 64-bit issue but I do not understand why PCIe device can only address 32-bit.
|
|
|
|
|
I have purchased an ST8000NM0075 as this drive is compatible with my SAN system. However, this drive shipped with E001 firmware on it and I need it to run the LE OEM firmware from lenovo for this drive to work. I have been unable to find a way to flash the LE firmware onto a drive with E firmware. Is there anything I can do to make this work?
|
|
|
|
|
You would be much better served asking this on Seagate's forums than anywhere else.
|
|
|
|
|
Hello,
I am looking for ideas or even solutions to access the video or image stream of BOA SPOT cameras from Teledyne DALSA directly for further image processing. Teledyne has a SDK which unfortunately does no support this series of cameras. Only their pre-built software solution gives access but cant be integrated in other programs.
So far I didn't find any SDK or solution which does not rely on theis Sapera SDK (which doesn't support BOA)
forging iron and new ideas
|
|
|
|
|
Contact Teledyne and ask them to help you.
|
|
|
|
|
Been there, done that. They want to sell (more expensive) cameras which are supported by their SDK, not the other way round. Yet we cant just tell our customers "sorry, got to buy new cameras because the old one is the same but it has no official support" 
forging iron and new ideas
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
