|
If you have a BIG pair of long nosed pliers, it should be able to be opened up to engage two of the opposite slots in the nut, then use a wrench across the opened pliers to turn the nut.
Dave.
|
|
|
|
|
Have you tried googling the number on the inside, plus the model of the bike. Looks like a part number!
|
|
|
|
|
I really don't give a crap what it is right now, that's a much lower priority than just getting it off, and there are either only generic workshop manuals or none for these cheap bikes. It cost me ZAR13k, where a Vespa 150cc costs ZAR70k, to give you a perspective.
|
|
|
|
|
Well, once youv'e identified whatever it is, you can Google removal instructions. The spiral thing looks like a captive spring, and my experience with springs is often when they come out (normally pinging past you face) they won't go back in.
|
|
|
|
|
The 'spiral thing' is no not the issue. It is in the cover of the mystery part, my which my photos show I have easily removed, and the spring shall forever remain untouched. It is the bottom half of the mystery part, where I say "here is what it looks like on the inside", that I need to remove. The top part was just held on with three easily loosened screws.
|
|
|
|
|
a) Put a big flat blade screwdriver into the slot and hit the shaft of the screwdriver to try and rotate the part.
b) put 2 big flat blade screwdrivers into opposite slots, lock the driver heads together and then turn the both of them, acting as a key.
If it is really tight, you could again try the heating method to release tension by expanding the parts.
|
|
|
|
|
Tried (1) half-heartedly, will try (2) tomorrow when I'm not exhausted. I will also try and bend a piece of steel into a U shape that fits the nut thing, in its slots, and turn that with a vice grip.
|
|
|
|
|
As a motorcyclist, I was intrigued by the part with no apparent function (I found your question also on http://mechanics.stackexchange.com/questions/9867/what-is-this-part-and-how-do-i-remove-it ), so I googled for the part number shown (CG200-B) and eventually found the Chinese company that (probably) make it: long link
This didn't get me very far, but I thought I recognised many of the pictures that Google offered as a Honda, so searched for Honda CG200, which wasn't too helpful, but led me to believe that the engine was based on the venerable Honda CG125 from the 80's, so I googled that and found a (free) workshop manual at www.die-kleinkraftrad-ig.de/wissensdatenbank/reparaturanleitungcg125.pdf which (on page 12) confirmed the empty housing with the 3 screws is a centrifugal oil filter. On p23 it tells you how to remove it with Honda's special tool 07916-6390001 which amazingly one can still buy at http://www.wemoto.com/parts/picture/HO-07916-6390001 for £26, which is not much help to you, but confirms that it can be made from a suitable length of thick-walled steel tube.
Good luck!
PS was there any oil/sludge inside the filter?
|
|
|
|
|
Thanks a whole lot man!  ![Beer | [beer]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/beer.gif) I googled the part number, but stopped looking after the first few hits. I was already preparing to make a similar removal tool, but it's fascinating to know the thing's function. Yes, there is a bit of stiff sludge around the shaft and locknut, but very little. I'll attempt the toolmaking this weekend, and hopefully be up and running by Monday. The 6.5km walk home from the bus stop is getting a little annoying.
|
|
|
|
|
but, these Germans can show the world a thing or two - this message is coming to you from 22,000+ feet, 'somewhere over India' via a WiFi Hotspot in business class connected to the rest of the world by Satellite 
(so Ive typed up my work notes and uploaded them)
Now all I need is for Germany/EU never to outsource their computers in Microsoft and Intel again - we were 2 hours late getting off the ground due to a number of reboots required on a computer and its backup - so it was back off the runway and to a maintenance zone we went - not happy, going to miss my connection tonight from Frankfurt to Florence I reckon
(ok, I don't know if they actually use Intel/Microsoft on an A340-600, but it makes for a good story)
btw, thanks to all those who chipped in about Bangkok - don't know what all the fuss was about on TV, the coup certainly didn't affect day to day life for us tourists - the limo sped past a roadblock on the way in but the soldiers wernt interested - and I'd forgotten how polite and nice the Thai people are
ttfn - a g&t beckons
|
|
|
|
|
Glad to hear you made it through Bangkok without incident.
Garth J Lancaster wrote: the coup certainly didn't affect day to day life
Not yet at least. Thailand has the military coup d'etat down to a science.
The problems arise only if it looks like the military does not want to transition to an elected government. The election will probably be set for a year from now but that is okay as long as it is scheduled to occur.
It is kind of amazing how life goes on pretty much as usual even with soldiers stationed on the streets. This is my second Thai coup d'etat and I am amazed how peaceful they are here. I wouldn't want to be in a coup d'etat in any other country that has less experience. 
Garth J Lancaster wrote: I'd forgotten how polite and nice the Thai people are
Amazing Thailand. 
Once you lose your pride the rest is easy.
The report of my death was an exaggeration - Mark Twain
Simply Elegant Designs JimmyRopes Designs
I'm on-line therefore I am.
JimmyRopes
|
|
|
|
|
No worries, as long as you get your sleep[^] I guess 
|
|
|
|
|
Even if the computers were such, it's more than likely the software as the culprit. But, hey, why let facts cloud narrative. You're as bad as Hollywood!
|
|
|
|
|
Glad to hear you had a safe trip.
Veni, vidi, vici.
|
|
|
|
|
mio amico (I would have said 'mi amici'), its only just begun - Im in bella Toscana with my father this week, next week we are cycling from Venezia to Firenze
|
|
|
|
|
Wonderful, have a good time here in Italy!
Where are you going to stay in Tuscany?
Form Venezia to Firenze is a bit long ride, how many kilometers per day are you going to cycle?
--Carlo the curious cyclist
Veni, vidi, vici.
|
|
|
|
|
In Toscana, We are using place in Montieri 'Rifugio Prategiano' - we had a booking for here 3 years ago and had to cancel at the last minute as my mother needed a stomach rebuild - but they kept our deposit saying we could use it 'next time' - so, here we are, except then they grudgingly let us use the deposit because this stay isn't as long as we had planned to last time, nor does it involve bikes like we were going to use 3 years ago (the revised trip & cycling component this time has the Venice-Florence cycle trip in it) - as far as Im concerned, they can bite me about the deposit
So, Venezia -> Firenze
Day 1 : 35km, Venice - Chiogga
Day 2 : 45km, Chiogga - Adria
Day 3 : 45km, Adria - Comacchio
Day 4 : 65km, Comacchio - Ravenna
Day 5 : 55km, Ravenna - Brisighella
Day 6 : 35km, Brisighella - Firenze
==================
280km
after this, I chaperone a friend for week in Paris, before cycling in 2 weeks Provence, incl Mt Ventoux, then have 8 days cycling in the UK, then a slack week not cycling - working, in Germany
|
|
|
|
|
Wow, we have to ride together somewhere, someday!
Veni, vidi, vici.
|
|
|
|
|
Fished all week and had a great time but left a couple of days early because I dropped my camera in the water and need to send it in to Nikon. Lesson learned, even though I didn't take it out in the boat don't ever take the camera on fishing trip again, don't ever take camera out on fishing trip again, don't ever...
Along with Antimatter and Dark Matter they've discovered the existence of Doesn't Matter which appears to have no effect on the universe whatsoever!
Rich Tennant 5th Wave
|
|
|
|
|
That's why I have two cameras, the cheaper one is watertight to 5 meters.
|
|
|
|
|
I've got a cheaper one, it's not waterproof but I wouldn't mind losing it as compared to repairing my D7000.
Along with Antimatter and Dark Matter they've discovered the existence of Doesn't Matter which appears to have no effect on the universe whatsoever!
Rich Tennant 5th Wave
|
|
|
|
|
Lesson learned -- use a lanyard (attached to the camera, of course, with the lanyard around your neck, of course) when holding expensive equipment over water, long falls, etc.
On occasion, I wish my cell phone had a cylinder I could string a lanyard through.
Marc
|
|
|
|
|
The problem is I layed it on one of the slats on the pontoon and someone drove up with a boat wanting to get in and I forgot about it and when I moved the boat it went kerplunk. My own damn fault but expensive lesson learned. 
Along with Antimatter and Dark Matter they've discovered the existence of Doesn't Matter which appears to have no effect on the universe whatsoever!
Rich Tennant 5th Wave
|
|
|
|
|
I have VS2012 and I went here[^] to download MVC 5 this morning, and the file names look kinda strange:
MVC4VS2010.EXE <<--- Why would the download for MVC5 be named this? (this is the file that's downloaded from the green "download free" button)
WebNode11Pack.EXE <<---- WTF is that? That's doesn't follow the standard MS naming convention. (this is the "install MVC 5 for Visual Studio 2012" link under the button)
Comments?
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
All your download are belong to us?
Those who fail to learn history are doomed to repeat it. --- George Santayana (December 16, 1863 – September 26, 1952)
Those who fail to clear history are doomed to explain it. --- OriginalGriff (February 24, 1959 – ∞)
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
