MFC fails to create main CFrameWnd - C / C++ / MFC Discussion Boards

Nikhil Wason7-Oct-04 9:15

7-Oct-04 9:15

I am having a problem in passing an integer as an agrument to a thread of the format:

UINT threadname (LPVOID);

I am passing 4 distinct values to 4 distinct threads using the same function as the thread operation. Whenever i typecast the address of the interger to LPVOID type, pass it an argument to CreateThread() & then re-typecast it to an integer in the thread function, i either get runtime errors or i get junk values. but never the original value of the integer that i wanted.

Is there any special way of typecasting pointers in vc++.net??

I also tried out using the reinterpret_cast operator and also replacing the CreateThread() function by AfxBeginThread(). Although i dont get any runtime errors now, but the same value is passed to 2 threads occasionaly (Rememeber i want 4 distinct values to be passed to 4 distinct threads) & sometimes a completely strange no is passed. The value is repeated for only 1 thread, the others are ok.

Plz help if any1 knows a workaround or solution to this.

--
Nikhil

Re: Passing parameters to threads

Joaquín M López Muñoz7-Oct-04 9:50

Joaquín M López Muñoz

7-Oct-04 9:50

Whenever i typecast the address of the interger to LPVOID type...

Here's the problem, I guess. You are passing the address of an int declared on the stack. As soon as you exit the function from where you're calling CreateThread, that int gets destroyed, so that when the thread tries to recover it it is likely garbage that's being retrieved instead.

As an int and LPVOID have the same size (in Win32), you can just reinterpret_cast the int (not its address!) to a LPVOID, and you should be done.

Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
Want a Boost forum in Code Project? Vote here[^]!

Re: Passing parameters to threads

Anonymous9-Oct-04 15:21

Anonymous

9-Oct-04 15:21

Yes it is bad problem... but try this ... instead pass iteager value as address pass a pointer to integer valeu... once i have similar problem .... i pass adress of varible with 3 distinct values to 3 ditinct threads but only first value is passed to all 3 distinct threads (no debug errors, no runtimes errors, no linking errors). Also in debbug mode it worked proparly but in release it didn't work proparly. The solution was to pass pointer to my varible instead as regular parameter. Some thing like that:

int *p = new int;
*p = 5;
CreateThread(..., p, ...);

Possible to write .ini from .bat?

blueSprite7-Oct-04 9:08

blueSprite

7-Oct-04 9:08

OS: win 2000

Is it possible to write to the .ini file from a .bat file?

Here's what I'm trying to do:
I have .bat that is supposed to make the user's life easy by installing our software using a base directory that the user specifies. So the user would execute "installProd.bat C:\user_area" (or Whatever Disk>:\where ever). The .bat creates the directory specifed (as well as others below it) places our C++ executables and our supporting files (like any input data files or help files, etc) into the dirs.

Now I'm hoping to write to the .ini file from within the .bat so I can put the user defined base directory into the .ini. Then when the C++ executables run, the executables can access the .ini file for the base directory path (using GetPrivateProfileSettings or GetProfileString etc).

Is it possible? Or am I going down the wrong path for this? ANy suggestions and guidance is much appreciated!

Thanks,
Rose | [Rose]

blueSprite

Re: Possible to write .ini from .bat?

Joaquín M López Muñoz7-Oct-04 9:59

Joaquín M López Muñoz

7-Oct-04 9:59

You can use echo.For instance, the following commands

echo>parms.ini [general]
echo>>parms.ini key=value

create an .INI file like this

[general]
key=value

Note that a single > means "create new file" and >> means "append". Hope this helps.

Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
Want a Boost forum in Code Project? Vote here[^]!

Re: Possible to write .ini from .bat?

pbloechl7-Oct-04 10:00

pbloechl

7-Oct-04 10:00

why not use an installer ?
InnoSetup (http://www.jrsoftware.org/isinfo.php) provides a simple tool for creating setup's. It has also builtin support for writing in .ini file.
The Tool is free available and well supported

If you still want to handle the stuff with a batch script:
append your stuff at the end of that ini-file via

...
echo [section] >> myIniFile.ini
echo myKey=%1 >> myIniFile.ini
...

pbloechl

Re: Possible to write .ini from .bat?

blueSprite7-Oct-04 10:34

blueSprite

7-Oct-04 10:34

Thanks both of you for your responses. I completely overlooked the obvious.

BTW, the installer suggestion is a great one, but my company often refuses to use anyone else's software but their own (the wheel has been reinvented more times than I can count Wink | ;)

Thank you both so much for your responses!

Rose | [Rose]

blueSprite Big Grin | :-D

MFC fails to create main CFrameWnd

Vaclav7-Oct-04 8:17

Vaclav

7-Oct-04 8:17

After working on project for several months I started getting assertion failure at winocc - GetExStyle. I have been "solving" this problem by regressing to last working version of the project. But now I am stuck, it fails every time I add new stuff. I need to fix this. Rumor has it it has to do with OLE, but I have been unable to find anything on the web.

Here is the Output message :
...
Warning: Window creation failed: GetLastError returns 0x0000057F
Warning: failed to create CFrameWnd.
...

How can I get to this "last error" ?

Thanks for your help.
Vaclav

Re: MFC fails to create main CFrameWnd

David Crow7-Oct-04 9:05

David Crow

7-Oct-04 9:05

Check out line 570 of winfrm.cpp. CreateEx() returns ERROR_CANNOT_FIND_WND_CLASS if the class name specified is invalid. Set a breakpoint on that line and note the value of lpszClassName. Having that might help to narrow down the problem.

"When I was born I was so surprised that I didn't talk for a year and a half." - Gracie Allen

Re: MFC fails to create main CFrameWnd found casue - now what?

Vaclav8-Oct-04 10:16

Vaclav

8-Oct-04 10:16

Thanks for your suggestion.
Found the cause , now what?
How is it possible to run wrong process?

My code seems to be failing when I modify/ add to my dependent library!
It works OK when I work on my main project only

Here is what is happenning:

MFC runs CWnd::CalcWindowRect(LPRECT lpClientRect, UINT nAdjustType)
instead off PreCreateWindow(cs)! per following sinipet:

LPCTSTR CFrameWnd::GetIconWndClass(DWORD dwDefaultStyle, UINT nIDResource)
...
CREATESTRUCT cs;
memset(&cs, 0, sizeof(CREATESTRUCT));
cs.style = dwDefaultStyle;

this call is not executed !
PreCreateWindow(cs);
// will fill lpszClassName with default WNDCLASS name
// ignore instance handle from PreCreateWindow.
...

So, the cs is never filled out and the file name is missing!

void CWnd::CalcWindowRect(LPRECT lpClientRect, UINT nAdjustType)
{
assertion fails here, as it should, because of wrong/ no data in cs

DWORD dwExStyle = GetExStyle();
if (nAdjustType == 0)
dwExStyle &= ~WS_EX_CLIENTEDGE;
::AdjustWindowRectEx(lpClientRect, GetStyle(), FALSE, dwExStyle);
}

WNDCLASS wndcls;

How to inlude files,getting link error!

Dani1000017-Oct-04 7:11

Dani100001

7-Oct-04 7:11

I have a problem with the include files and I am getting an error :

win32.obj : error LNK2019: unresolved external symbol _BltAlpha referenced in function _DD_Init

This is how I have set up the project:

I call the BltAlpha in DD_Init in

win32.c:

#include "stdafx.h"

bool_t DD_Init(win* p)
{
BltAlpha(p,.....

I have declared all my include files in

stdafx.h:

#include "win32.h"
#include "blend.h"

And then I have included stdafx.h in both blend.c and blend.h

blend.c:

#include "stdafx.h"

// The implementation of BltAlpha:

int BltAlpha( win* p,int iDestX, int iDestY, LPRECT lprcSource, int iAlpha, DWORD dwMode )
{ ............

blend.h:

#include "stdafx.h"

//The declaration of BltAlpha:

int BltAlpha( win* p,int iDestX, int iDestY, LPRECT lprcSource, int iAlpha, DWORD dwMode );

So why am i getting this link error, I have really tried to put the header files in different combinations, but with no luck?!

Please is there anyone that can help me with this one before I´m going crazy!?

Thanks, Dani

Re: How to inlude files,getting link error!

Rage7-Oct-04 7:42

Rage

7-Oct-04 7:42

Hi,

I think that this is a tricky question : try and rename your .c files into .cpp files, and it should solve the problem Eek! | :eek:

. Visual adapts the calling convention according to file extensions. You have probably created a C++ project, and tried to insert a c file. A very naive explanation would be: the way the parameters are called with

BltAlpha(p,.....

is the C++ way and the way you declare in in blend.c is compiled as the C calling convention. This is Ok for the compiler, but it cannot be linked.

If you do not want to rename your files, try modify the calling conventions in the settings of your project Project->Settings->C/C++->Category:Code Generation->Calling convention.

But I must admit, this is tricky Roll eyes | :rolleyes:

~RaGE();

Re: How to inlude files,getting link error!

Rage7-Oct-04 7:46

Rage

7-Oct-04 7:46

As for the header file organisation, this should do it:

stdafx.h:
#include "win32.h"
#include "blend.h"

win32.c:
#include "stdafx.h"

blend.c:
#include "stdafx.h"

~RaGE();

Re: How to inlude files,getting link error!

Dani1000017-Oct-04 8:00

Dani100001

7-Oct-04 8:00

Thanks Rage!!!!!!

Whooooooops! the blend.c was named blend.cpp in my project, did not noticed that !

This have to be a bug in Visual C++ 6.0, because the only options for adding a file is

new->c/c++ header file

or

new->c++ Source file and there is no option for a new c file

This is strange though, anyway thanks Rage Smile | :)

Re: How to inlude files,getting link error!

David Crow7-Oct-04 9:07

David Crow

7-Oct-04 9:07

Dani100001 wrote:
This have to be a bug in Visual C++ 6.0, because the only options for adding a file is

new->c/c++ header file

I use Project --> Add To Project --> Files

"When I was born I was so surprised that I didn't talk for a year and a half." - Gracie Allen

can i use %windir% to get windows directory???

venadder7-Oct-04 6:54

venadder

7-Oct-04 6:54

Hi,
I want to replace the hardcoded string by the path in %windir% in the following code

#ifdef WIN32
CHAR CFM_INI_FILE[CFM_NAME_LEN] = "C:\\Winnt\\abc.ini";
#else
CHAR CFM_INI_FILE[CFM_NAME_LEN] = "/Winnt/abc.ini";
#endif

can I do that?

I cannot use GetWindowsDirectory function because this code is in global space in a cpp file.
My understanding is a function can be called only from within a function and not from global space.
Please advice..
P.S. :- this code has to be in global space. If i put it in function and initialize there i have to make changes in over 60 files to make sure it is initialized before it is used.

Re: can i use %windir% to get windows directory???

Rage7-Oct-04 7:33

Rage

7-Oct-04 7:33

It is possible to get the value of %windir% with several functions, amongst them

char *getenv( const char *varname );

but from what I understand in your msg, you do not want to use any initialisation, e.g. function call. So I am afraid that the answer to

venadder wrote:
can I do that?

is : yes, you can, but it will unfortunately not be replaced at runtime with "C:\Winnt". Unsure | :~

So, be ready to modify your 60 files Dead | X|

~RaGE();

Embedding a dialog from dll in main program's splitter View and doing data exchange in dll

kumar_gaurava7-Oct-04 5:39

kumar_gaurava

7-Oct-04 5:39

Hi,

Am sorry if the subject looks too long. Didn't know how to explain it better.... Smile | :)

Here is my problem. I divide my SDI into 2 columns using dynamic splitter. I associate the left column with some view. Now i want the right column's view to show a dialog resource from one .dll. I could get the dialog resource from the .dll and display it in the right view by getting the resource ID from the dll ( after loading it ofcourse ) and then using the FindResource() and LoadResource(). But the problem is that if i enter something in the dialog resource and then click "Ok", then i expect my handler in the .dll to be called and then retrieve all the configuration parameters that user enters in the dialog resource.

But my handler is not getting called, and obviously because of that, the dll cannot get the parameters entered into the dialog resource.

Is there any way to do this? So that the .dll can contain the dialog resource, and i can embed it in my main exe after loading that dll. And then once user clicks ok on the dialog, the appropriate handlers and data exchange happens inside the .dll, and my main application neednot care about the configuration parameters that the .dll wants...

Thanks & Regards,
Kumar

Kumar

Impersonation

Per Nilsson7-Oct-04 4:42

Per Nilsson

7-Oct-04 4:42

Hello

I would like to call ImpersonateLoggedOnUser to gain some extra rights for a particular task in my application. For the call I need an impersonation token. To get this I tried the LogonUser function, but I don't have enough privileges. Probably it's the SE_TCB_NAME privilege. If I inspect the results from GetTokenInformation it is true that I don't have that priv and hence cannot enable it.

Does anyone know how to get a proper impersonation token.

I've tried to call CreateProcessWithLogonW to create a dummy process as a different users, and with that process handle I can call OpenProcessToken to get a token to send to ImpersonateLoggedOnUser. This gives the expected result, but it is a verry uggly work around.

Re: Impersonation

toxcct7-Oct-04 4:48

toxcct

7-Oct-04 4:48

ahhhhhhhhh

H for Hello ! Big Grin | :-D

TOXCCT >>> GEII power

Re: Impersonation

Rage7-Oct-04 7:55

Rage

7-Oct-04 7:55

I think that

Per Nilsson wrote:
I tried the LogonUser function, but I don't have enough privileges

and

Per Nilsson wrote:
that process handle I can call OpenProcessToken to get a token to send to ImpersonateLoggedOnUser

are somehow contradictory. If the "different users" you are talking about has enough privileges to make a good token for ImpersonateLoggedOnUser, you should also be able to use it for
LogonUser and hence get the same sufficient privileges ... I think your call to LogonUser must have failed somewhere ...

~RaGE();

please help- different colored letters

...---...7-Oct-04 4:41

...---...

7-Oct-04 4:41

Consider the following-

DrawText (hdc, "Hello, Windows 95!", -1, &rect,
DT_SINGLELINE | DT_CENTER |DT_VCENTER) ;

Could someone show me some code that would draw each letter in a different color?
While I am grateful for any help you could offer, please just dont reply with something line "just use CDC::SetTextColor...". I know that. My problem is in how best to iterate through each character in the text and assign each letter a different color. I want to see A CODE FRAGMENT.

thanks again..... Confused | :confused:

Re: please help- different colored letters

Maximilien7-Oct-04 7:19

Maximilien

7-Oct-04 7:19

again ?

a couple of questions ...

Do you know how to iterate through each character ?
Do you know how to compute the size/position of the text ( using CDC::DrawText )

another BIG hint : DT_CALCRECT ...

Maximilien Lincourt
Your Head A Splode - Strong Bad

Do I know how to iterate?

...---...7-Oct-04 7:41

...---...

7-Oct-04 7:41

Thanks for your answer. I know how to iterate. What I don't know is how to format the function call.

Example:

CString _str;

DrawText (hdc, "Hello, Windows 95!", -1, &rect,
DT_SINGLELINE | DT_CENTER |DT_VCENTER) ;

// Can I say something like

//call to iterator
{
DrawText (hdc, "_str[i]", -1, &rect,
DT_SINGLELINE | DT_CENTER |DT_VCENTER) ;
}

Re: Do I know how to iterate?

David Crow7-Oct-04 8:10

David Crow

7-Oct-04 8:10

SkunkedWorks wrote:
// Can I say something like

//call to iterator
{
DrawText (hdc, "_str[i]", -1, &rect, DT_SINGLELINE | DT_CENTER |DT_VCENTER) ;
}

Only if you want _str[i] to show up on the DC.

"When I was born I was so surprised that I didn't talk for a year and a half." - Gracie Allen

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.