|
Hi,
I need to wrap a native c++ class which has a virtual function this virtual function needed to be implemented with the derived classes from this class(the function is called automatically like events from the class), how can i do that using c++/cli??
thx
|
|
|
|
|
Hi, I am using managed c++ to (try) and get a project that will go through a directory of files and copy them to two directories if the contents are right. Currently the sorting goes alright, but not if I insert the copy call, well, I get this runtime error:
System.IO.IOException: The target directory already exists.
First of all, I'm hoping the directory exists... I have the code write out what it's copying from and to using Console::WriteLine, and I can assure you it is valid and proper. I tried using the overload that includes the boolean and set the boolean to true to allow it to override the file, but it still insists the directory exists.
Has anyone else noticed this and/or got a solution?
|
|
|
|
|
I feel like an idiot now 
I changed the code BEFORE the call, but I didn't change the call itself to use the new variable. Now it works fine. PEBKAC right here, I'll tell ya.
|
|
|
|
|
How do I DeSerialize a file in C++ .NET (e.g. using BinaryFormatter) that was originally created by Serialized in an MFC appliction using CDocument::Serialize?
When trying to do this, I get:
BinaryFormatter Version incompatibility. Expected Version 1.0. Received Version 1684632134.539785569.
Thanks!
|
|
|
|
|
I want to setup hotkeys in my application to control vobsub to show ,hide or shift the subtitles for DivX video becuase the VobSub doesn't offer this service and it's not convenient to control it by mouse. As I know ,usual hotkey software use hook tech to implement such function, but I don't know VobSub's interface and don't know how to get it. I need your help!
|
|
|
|
|
Hi,
I have 3 projects:
"Managed C#" calling "C++ Managed Extension (mixed code)" calling "Unmanaged C++ code"
I am trying to debug them using .Net Visual Studio 2003, setting breakpoints on each project. Unfortunately, it is not able to trace down to unmanaged code.
There are some exceptions happening in unmanaged code - and I cant proceed further with the project unless I am able to debug them to know what's going on.
Has anyone come across this situation before??
cheers,
nics
|
|
|
|
|
Hi
I am in the process of upgrading an older program written using MCF.
Some parts of the new program use Managed C++ and Windows.Forms (external dll).
Is there an easy way of integrating the two - for example press a .NET button (e.g. of type System::Windows::Forms::ToolBarButton) to open a MFC dialog (of type CDialog)?
I don't want to rewrite everything as Windows.Forms (e.g. convert "CDialog" to "System::Windows::Forms::Form")
|
|
|
|
|
We are also trying to do the same and want to reuse the document view architure in one of the complex component. How do we do that? Can we make .NET form as Mainframe/ChildFrame for the views and document? Any pointers will be appreciated.
Thanks.
|
|
|
|
|
;PHi,
I can solve your problem, if you have any questions about use .Net Control in your MFC Project, please contact me, my e-mail is sunhui@mail.apptemplate.com, please visit my site: http://www.apptemplate.com
sunhui
|
|
|
|
|
Hi,
I can solve your problem, if you have any questions about use .Net Control in your MFC Project, please contact me, my e-mail is sunhui@mail.apptemplate.com, please visit my site: http://www.apptemplate.com
sunhui
|
|
|
|
|
Have been trying without success to call an managed function from
within an unmanaged class. This would seem to be a basic requirement,
of the dotnet so I am obviously doing something wrong.
Given the class CMyManaged header as:
#pragma once
public __gc class CMyManaged
{
public:
CMyManaged(void);
~CMyManaged(void);
void MyFun(void);
};
and a standard MFC dialog class, I wish to call MyFun() from
within MyMFCDlg().
Now I went about this by declaring a CMyManaged variable m_MyManaged;
in the unmanaged MyMFCDlg() header file. Then in MyMFCDlg.OnInitDialog()
I try to call m_MyManaged.MyFun();
Have tried declaring the managed variable as
gcroot<cmymanaged*> m_MyManaged;
But various means to call MyFun() have all resulted in
compilation errors.
Any help would be appreciated, as the C# dialog box is to limited I
need to continue developing partially in Unmanaged C++.
Many thanks
|
|
|
|
|
3green wrote:
have all resulted in
compilation errors.
Post the compiler error messages, otherwise we have to guess.
Obvious things to check:
Do you have properly configured "mixed mode" project settings?
Do you have required #include and import statements?
If you don't know what one or both of those are you need to use MSDN to read about "mixed mode" development.
"No matter where you go, there your are." - Buckaroo Banzai
-pete
|
|
|
|
|
Hi,
My current Project has the following Requirements:
1. Backup the entire contents of the hard disk including Operating System as a bootable Image.
2. In case of System Failure, user should be able to perform a full system-recovery operation using the Backed up Image of the Hard Disk.
I am new to this concept and request any sort of help on how to proceed with this.
Any help will be greatly appreciated..
Regards
-Ram
|
|
|
|
|
That is generally considered too broad a subject or too vague of a question to receive a meaningful reply in a forum. You could probably write a book chapter or several on a subject of that scope. You might have to do some reading until you have broken down your problem into it's constituent parts. The post small specific questions to obtain help in a forum format.
But, that's just my opinion... I could be wrong.
"No matter where you go, there your are." - Buckaroo Banzai
-pete
|
|
|
|
|
|
Okay, I'm a little confused. So, the ANSI / ISO Standard C++ is
a stardard C++ lanugage that targets non .Net platform and
managed C++ is designed by Microsoft that targets .Net platform.
Code that generated by using the ANSI C++ is also called native code or unmanaged code
and code that generated by using Manage C++ is called managed code.
Is that right?
|
|
|
|
|
Mostly. However Non ANSI / ISO Win32 C++ code is also considered "native" in discussions of "managed" C++.
"No matter where you go, there your are." - Buckaroo Banzai
-pete
|
|
|
|
|
|
Hi all,
I got a problem with Return key in my C++/C# application.
On CView dilalog I put my C# control using managed extension. This C# control has couple
other controls nested. I have problem with RichTextBox control which
is at the bottom of my control hierarchy. It does not process
VK_RETURN key down. So I can not create new line. All other keys work
in RichTextBox. Of course I made it Multiline. I used Spy++ tool to
figure out what is going on. I managed to see that RichTextBox window
receives ON_KEYDOWN message with VK_RETURN. But there is no WM_CHAR message which normally should follow WM_KEYDOWN. As a result no new line is created in RichTextBox.
Tried to catch WM_KEYDOWN in WndProc and onkeydown. But they are hit for all keys except of RETURN
I would greatly appreciate any hints.
Thanks in advance,
Roman
|
|
|
|
|
So your C# control is not receiving the VK_RETURN event notification? Try asking in the C# forum.
"No matter where you go, there your are." - Buckaroo Banzai
-pete
|
|
|
|
|
Just found solution.
In overriden WndProc I listened for WM_KEYDOWN message and never got it. But in reality I should have listened for WM_GETDLGCODE.
After I caught the message I could insert new line in textbox manually
Roman
|
|
|
|
|
Hi everybody
If can anybody help me with checking the "Change" in the Status register of the Parallel Port, i want to use it to check a clock from an external device periodically, also i want to know if i can stop the interrupt to the Microprocessor while i'm using the parallel Port
Thank you everybody and have a nice day 
|
|
|
|
|
Parallel port is usualy on 0x378 adress and it's registers are: controll 0x379, status 0x37A, so you just ned to read from adress 0x37A something like clock_status = inportb(0x37A) or something elese. Note that you can not use inportb function on NT based systems before you use some driver (there is a lot of that stuff) that will allow you direct accsess.
--Nikola--
modified 7-Dec-20 21:01pm.
|
|
|
|
|
I'm looking for some help in coding an application where I need to share some data between two threads. The first thread is managed code and it launches another thread that is unmanaged code. Can someone point me to an article, example, etc. on how to do this?
Thanks.
|
|
|
|
|
Hello!
i want to use from your codes about widows programming in c++ (mfc classes)
but your codes have not "application class" ,please refer me to application classes and main method ...
thank you very much.
dsdsd
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
