|
I would do 3 things.
1) Create a LIFO stack to hold the actual event data and write it to as file as needed. The stack class would also take care of adding the time stamp to each entry
2) Create an event handler for all the MouseEnter events for each button and have this handler write to your stack class when the mouse enters buttons
Private Sub MouseEnter(ByVal sender as Object, ByVal e as EventArgs) Handles Button1.MouseEnter, ... Buttonx.MouseEnter
Dim B as Button = sender
Stack.Push(B.name,"MouseEnter")
End Sub
3) Create an ecvent handler for all the MouseLeave events for each button and have this handler write to your stack class when the mouse leaves buttons
Private Sub MouseLeave(ByVal sender as Object, ByVal e as EventArgs) Handles Button1.MouseLeave, ... Buttonx.MouseLeave
Dim B as Button = sender
Stack.Push(B.name,"MouseLeave")
End Sub
This will take you down to needing only two event handlers to cover all your 'Buttons'.
Paul Watson wrote:
"At the end of the day it is what you produce that counts, not how many doctorates you have on the wall."
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
|
|
|
|
|
Ray
It is news to me that you could use the stack like that!
Part of my problem is the 'culture shock' coming from VB6 to VB.net, I was just about to repost to Dave to say that I have quickly come round to his view.
Put MouseEnter & MouseLeave events in there own two handlers and then determine the sender, which is readily available.
So you would never need the 40 handlers that I implied, to solve my particular programming example.
I thank you both once more.
|
|
|
|
|
gaxxx wrote:
It is news to me that you could use the stack like that!
My bad... I meant to correct myself and say Queue (Last in First out)
I always try to think a bit loosly coupled in things like this. Rather than opening, closeing and writing to the file in each event handler just abstract that part out to antoher class and have you event handlers 'give' thier data to that class.
Paul Watson wrote:
"At the end of the day it is what you produce that counts, not how many doctorates you have on the wall."
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
|
|
|
|
|
There are simpler ways of doing things is all I was saying...
Just grouping all the *Enter events in one function and all the *Leave events in another is much simpler than what you were trying to do before.
RageInTheMachine9532
|
|
|
|
|
Hi All!!
From your experience:
What is the best book that can teach me all i need in VB.NET as a beginner?
I already bought SAMS Teach Urself VB.NET in 21 Days (by: simon cox), but i can't find everything in it.
And what book in VB.NET is the best in dealing with graphics?
Thanx alot
Toola
"If you can't beat your computer at chess, do what I did — try kick-boxing." — Matt Larson.
|
|
|
|
|
Toola wrote:
SAMS Teach Urself VB.NET in 21 Days
U can use VB.NET for 21 days only 
Any book from WROX would do.... I am not sure about graphics part in it. Check the 'index' page for the book before you pay for it
There is nothing new under the sun,
But there are lots of old things we don't know.
- Ambrose Bierce
|
|
|
|
|
S P S wrote:
U can use VB.NET for 21 days only
|
|
|
|
|
|
Hi everyone..
I just have a few small Q's about using picture boxes, and need your help 
1-How can i make the picture inside the box strechable,i.e. takes the size of the box?
2-How can i create a new picture box from inside the program (code)?and add a pic to it?
I bet you already guessed..well ya, i'm a beginner
Plz help me anyone ...i,m in a hurry 
Toola
"If you can't beat your computer at chess, do what I did — try kick-boxing." — Matt Larson.
|
|
|
|
|
1-
there is a property for the PictureBox object called SizeMode. set this to StretchImage in order for the image to take the size of the pictureboxes' dimensions (itll stretch/shrink the image to the boxes' dimensions).
ex: PictureBox1.SizeMode = StrechImage in code, or simply set the objects property at design time (in properties window, of course)
2-
to set the picture to be displayed in the picturebox, use its Image property.
ex: PictureBox1.Image = Image.FromFile("C:\my Pictures\pic1.bmp"). note: you can only use certain formats or u will get an error. i dont remember the full list but its most of the main ones (.bmp, either .jpg or .jpeg [i thought only 1 of the 2 worked], .gif, etc).
i dont know how to programmatically create another picturebox at run time. hopefully sum1 can post info on it.
------------------------
Jordan.
III
|
|
|
|
|
Thaaaaanx alooot Nadroj, you made my day
just one answer left i hope someone can answer it!!
Btw, i saw a function called CreateControl , but i really don't know what it does or what parameters it takes? i tried using it, but i failed , i keep giving it the wrong parameters!
do you know how to use it?
Toola
"If you can't beat your computer at chess, do what I did — try kick-boxing." — Matt Larson.
|
|
|
|
|
no sorry i have never looked into creating objects at runtime, so i wouldnt know where to start. hopefully sum1 can post a how-to, and inform the both of us!
------------------------
Jordan.
III
|
|
|
|
|
Toola wrote:
Btw, i saw a function called CreateControl , but i really don't know what it does or what parameters it takes? i tried using it, but i failed , i keep giving it the wrong parameters!
do you know how to use it?
MSDN[^] is a great source of information. You will find that the PictureBox class that you are using inherits from System.Windows.Forms.Control, which contains a method called CreateControl(). Read more here[^] if you are interested.
- Nick Parker
My Blog | My Articles
|
|
|
|
|
Thanx alot Nick. I checked out MSDN's site & found it very useful, sure bet i'll be entering that site again!!
I already found a way to create a PictureBox at run time without using the CreateControl() method,
Simply as this:
Dim pb As New PictureBox<br />
System.Windows.Forms.Form1.Controls.Add(pb)<br />
(or Me.Controls.Add(pb))<br />
---------------------------
Toola
"The SMALL details are what make the difference in the BIG picture"
|
|
|
|
|
I want to set a launch condition so that if Office 2000 or newer is nt installed on the target machine, the installation will abort. What Registry value should I use for this?
Thanks!
|
|
|
|
|
You could try looking for the existence of the key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\9.0, 10.0 or 11.0.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Hi Friends,
I’m creating a database application for keeping password… I got an example of the Password Keeper project that is attached to this site, however in this project the programmer is using arrays to store data and I’m using a database. My database contains two tables; one for login information and the other for the password accounts information. There is a relationship between the two tables, so the user can inter more than one record. I’m facing problem two main problems, which are:
1- Connect the Date and Time Picker control to the database…
2- I want to combine the data in the login form with information in the account details form. For example when I login with my username and password to the system, it shows only the information that I have entered to the database and I can search only the data are related to my username (ID Account)… I don’t know if that can be possible or at least I can get examples of that…
 By the way I’m beginner and I’m really doesn’t know when we have to use modules and for what!!!!!??? 
Regards,
Albadyaih
Albadyiah
|
|
|
|
|
Hello,
I know this forum, I am using vb.net and i want to create a report using Crystal Reports. The question i have is how do change the orientaion of the report from portriat to landscape? The default is landscape but I need to create a report in landscape because it is going to have alot of info on it.
Thank you,
Santana
|
|
|
|
|
Hi,
suppose you have set
<br />
Dim ObjCrystalR as NameofYourReport<br />
Then you just have to do the following :
<br />
objCrystalR.PrintOptions.PrinterName = strNomPrinter<br />
objCrystalR.PrintOptions.PaperOrientation = CrystalDecisions.[Shared].PaperOrientation.Portrait<br />
objCrystalR.PrintToPrinter(1, False, 0, 0)<br />
This code will set the Printer to strnomPrinter.
Change the orientation
And finally, printer 1 time the page.
Sybux
|
|
|
|
|
Thank you,
But, the question is how do you change the report in the crystal report design view to be in landscape, when you are creating it. I have it attached to a crystalreportsviewer form, i imagin if i can create the report in landscape the view will show it and print it in landscape. Can someone le tme know if i am right and how to do it.
Thanks
Santana
|
|
|
|
|
In my application, I have used an applicaton specific file extension for a binary file. I would like to add a unique icon to these files. I have looked in the MSDN in vain for instructions on how to do this. Can anyone help me?
Thanks!
|
|
|
|
|
If you mean that you a specific icon in Windows Explorer, you just have to create an entry in the registry.
Can have a look at HKEY_CLASSES_ROOT\htmlfile for exemple.
In this example, you will see how to set an icon (DefaultIcon) and see how to lunch an application when double click on it (Shell->Open)
For the icon, you have to option, a separate file ar included in your exe file. I you want to use second option, you will have to modify the propertie of your icon file in the projec Explorer of Visual Studio. You have to change the Build Action in Embedded Resource
Hope it will help you !
Sybux
|
|
|
|
|
Hi,
I know how to use datagrid in asp.net but I don't know how to use it in vb.
I've got a dataset with a datatable which contains all columns of a table.
I want to display only speficied columns in my datagrid but I don't know how to select them !
Thx
Sybux
|
|
|
|
|
i need vb.net API to fetch/retrieve email from smtp server, any suggestions?
regards,
asim mirza
|
|
|
|
|
i would also be interested if someone comes up with hints to develope such own routine at my own. like pop server component.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
----------------------------------------------------------------------
