System Admin

FirstPrevNext

Re: Argument list to the batch file Michael Dunn7-Feb-04 16:08 Michael Dunn 7-Feb-04 16:08  Use the SHIFT command in the batch file to move %2 to %1, %3 to %2 ... %10 to %9 --Mike-- Ericahist | CP SearchBar v2.0.2 | Homepage | 1ClickPicGrabber | RightClick-Encrypt IMAP/POP BrockVnm4-Feb-04 6:54 BrockVnm 4-Feb-04 6:54  Hey everyone, I had posted a message awhile back asking if anyone knew of a web front end to use for my sendmail (running on solaris 8) server. I was refered to squirrelmail. Which actually looks great. After furthur reading up on it I realized that squirl mail is used with IMAP. I guess here is my question. My mail server is using qpopper (a pop3 software). Will squirlmail beable to still be used on this server? And can I run pop3 and imap on the same accounts? i.e. if I have joe@host.com and he is checking it from say outlook as pop3 can he also check his joe@host.com email through squirrlmail which is IMAP. I hope I havent confused anyone....lol Thanks to everyone in advance! DLL Registration problem Shenthil4-Feb-04 0:16 Shenthil 4-Feb-04 0:16  I am a domain administrator for a Win 2K system. My domain a/c is included in the administrators list. Though I have these privileges, I am not able to register any dll. But I can register dll as a local admin. Is there any changes tobe done, so that I can registe Dlls from the domain A/C. Shenthil Re: DLL Registration problem Steve S9-Feb-04 7:14 Steve S 9-Feb-04 7:14  Is the Domain Admins group a member of "Administrators" on the local machine? Steve S Re: DLL Registration problem Shenthil9-Feb-04 17:35 Shenthil 9-Feb-04 17:35  Yes. It is. Still I couldnt' find the solution. Disabled services won't start! IISMan3-Feb-04 14:10 IISMan 3-Feb-04 14:10  I'm stumped. I have a machine running Windows 2000 Server with SP4. It is a remote server which I am accessing through Terminal Services as an Administrator. There are a ton of entries in the System Log saying "error 7001 Service Control Manager. " Currently the Server, Computer Browser, IISadmin service ,RPC services are all DISABLED and I can not enable them! When I try to start the services I get errors like: "System error 1058 has occured. The service could not be started because it is disabled or because it has no devices associated with it" or "Error 1068: The dependency service or group failed to start". I also can't open properties windows for any services to set them to start automatically. I can right click on the service names, but when I click on properties nothing happens. What can I do to get these services started again? Thanks in advance, Andre B Re: Disabled services won't start! Mike Dimmick5-Feb-04 0:22 Mike Dimmick 5-Feb-04 0:22  I think your problem is that the RPC service is disabled. COM relies on the RPC service. I recommend getting hold of the sc.exe utility. You can find it in the Platform SDK[^], or it's also in the Windows 2000 Resource Kit. You can download it here[^] (scroll down to SC.EXE). It ships with Windows XP and Server 2003. sc.exe talks directly to the Service Control Manager, bypassing the UI you're having problems with. You probably need to do the following in order to get RPC going again: sc config RpcSs start= auto sc start RpcSs Once you have that, you should be able to use the user interface again. Re: Disabled services won't start! Mad Networkist14-Feb-04 2:59 Mad Networkist 14-Feb-04 2:59  If I understand you well, here is the answer. There are three possible options for the services. Automatic, Manual and Disabled. On automatic, the service start when the server boot. On manual, it start on demand. On Disabled, it cannot start. Go to the Services item on the Administration tools and, pointing the service you want, go to the properties on the contextual menu. In the dialogbox, chage the value disabled by manual (listbox). Of course, you need server administrator rights. There is no such thing as a free lunch Windows Registry Badut2-Feb-04 12:18 Badut 2-Feb-04 12:18  I got a question about some registry settings HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Biosinfo\SystemBiosDate HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0\~Mhz HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0\Identifier HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0\VendorIdentifier Would anyone be able to tell me how Windows obtains the information in these settings? Also what would happen if I changed one of them (eg. change ~Mhz to a value lower/higher than my CPU speed)? Much appreciate any help Re: Windows Registry Matt Newman2-Feb-04 13:57 Matt Newman 2-Feb-04 13:57  I'm not sure, I am guessing it checks the hardware on boot. Badut wrote: Also what would happen if I changed one of them (eg. change ~Mhz to a value lower/higher than my CPU speed)? Nothing, ~Mhz is just used to display in the My Computer dialog (possibly some other locations too) It would just affect what is shown there. Matt Newman Re: Windows Registry Badut2-Feb-04 14:12 Badut 2-Feb-04 14:12  Thanks Matt. Matt Newman wrote: Nothing, ~Mhz is just used to display in the My Computer dialog (possibly some other locations too) It would just affect what is shown there. So I guess it's a similar situation with the BiosDate, Identifier and Vendor Identifier. These registry entries are for display only and they can be changed without affecting system operation? Re: Windows Registry Matt Newman2-Feb-04 15:05 Matt Newman 2-Feb-04 15:05  Badut wrote: So I guess it's a similar situation with the BiosDate, Identifier and Vendor Identifier. These registry entries are for display only and they can be changed without affecting system operation? I can't see it causing any problem, unless a program would use this information. But chances are any software that would need such information could just check vs the actual hardware. Matt Newman Single process priviliges Bob Stanneveld31-Jan-04 4:37 Bob Stanneveld 31-Jan-04 4:37  Hello, I'm running windows XP Professional. I want to run certain programs under the guest account that need certain rights. I cannot find any information on how to set permissions for one single program (like setting permissions for a daemon on linux). Is this even possible? Thanks. A student knows little about a lot. A professor knows a lot about little. I know everything about nothing. Re: Single process priviliges Matt Newman31-Jan-04 6:08 Matt Newman 31-Jan-04 6:08  Is it an NT service, or just a regular program? If its just a regular program just right click on it and click Run as, its right below Open. If its an NT service you can change the account it will run under in the services control panel (found under administrative tools). Its under the log on tab for the service properties. Matt Newman If you chose to continue this discussion, I am fully prepared to make you my bitch. I invite you to ask around, and you'll find out that I'm quite capable of doing so - John Simmons on Trolls Re: Single process priviliges Anonymous31-Jan-04 6:51 Anonymous 31-Jan-04 6:51  It's just a regular program. But I don't want other users to type in the administrators password. Exemple: When a user logged on as 'Guest', it runs a program, the program should have administrator priviliges by default. When you use the runas program, you'll have to type in the password of the specified user over and over again. Re: Single process priviliges Bob Stanneveld31-Jan-04 6:51 Bob Stanneveld 31-Jan-04 6:51  It's just a regular program. But I don't want other users to type in the administrators password. Exemple: When a user logged on as 'Guest', it runs a program, the program should have administrator priviliges by default. When you use the runas program, you'll have to type in the password of the specified user over and over again. Re: Single process priviliges Matt Newman31-Jan-04 9:27 Matt Newman 31-Jan-04 9:27  Ok, I see what you mean. I think there is away to progmatically set the user it is running as, but I have never done it. Hopefully someone who has will respond. Matt Newman If you chose to continue this discussion, I am fully prepared to make you my bitch. I invite you to ask around, and you'll find out that I'm quite capable of doing so - John Simmons on Trolls Re: Single process priviliges Steve S2-Feb-04 2:42 Steve S 2-Feb-04 2:42  See that light, see that tunnel. The original question was 'Can I run a program with SETUID on', translated from UN*X-speak to Windows-speak. I believe the answer is no, you cannot. To impersonate another user requires the other user's password. RunAs is the Windows equivalent of 'su'. There is no equivalent of 'execute as owner' in Windows. You could, programmatically, using SSPI, create an impersonation token, but again, that requires the user's credentials (guess how RunAs works?). It would be difficult (and foolish) to make available the password to an application without also running the risk that it would become widely available, not to mention the difficulties of keeping it in step with any password changes (although password notification would be one mechanism). Steve S Problem Tomcat sessions Under IE after installed VS.NET dje_jay28-Jan-04 7:37 dje_jay 28-Jan-04 7:37  Hi! For an another project, i need a Tomcat running. But since i installed VS.NET, i've problems with my sessions in my JSP pages... (Only under IE - and in the lan too). Perhaps it's about the web.xml(in tomcat)... But i can't find witch parameter to change... Does anyone have an idea? Thanks Delfosse Jérôme Add-in PCI IDE Card Michael Martin26-Jan-04 15:15 Michael Martin 26-Jan-04 15:15  I have GIGBYTE GA-7VKMLS[^] motherboard which has the standard two IDE ports. They are both currently full with the following hardware - Primary Master - Maxtor 6Y120PO ATA-133 HDD Slave - Seagate ST380021A ATA-100 HDD Secondary Master - Lite-on XJ-HD166S DVD-ROM Slave - Lite-on LTR-52327S 52x CD-RW I have been finding that there is a bit of slowness when accessing the hard drives that I think may be caused by conflicts on the primary IDE channel. Plus I have an Imation LS-120 drive that has been sitting shrink wrapped on the shelf for the past 8 months looing at me. Which of course I want to put in but don't really need too. So I have been thinking about buying a Skymaster PCI/IDE ATA-133 add-in card (sorry can't find a link anywhere). I have the money in my pocket now and so obviously want to go get it now, but thought I should pass this by the Code Project gurus before I do. Note I bought one of these to put in a computer at work that could only see 64GB of a new 80GB HDD I bought. Haven't gotten around to installing RedHat 9 on it yet but the initial hardware setup seemed to go very well. My plan is to setup the hardware in the following way - Onboard Primary Master - Maxtor 6Y120PO ATA-133 HDD Secondary Master - Seagate ST380021A ATA-100 HDD <edit>This was meant to be a HDD and not a DVD-ROM</edit> PCI Card Primary Master - Lite-on XJ-HD166S DVD-ROM Slave - Lite-on LTR-52327S 52x CD-RW Secondary Master - Imation LS-120 Anyone see any hidden dangers I can't? Or anyone out there with experience trying something like this who has mastered the problems found? <edit> After buying the card I decided to look more carefully at my case. It only has a spot for one FDD that has access to the outside world. So this means removing the standard FDD and replacing it with the Imation LS-120 drive. The BIOS supports the drive and booting from it and all. But thinking about it leads me to believe I would have to connect it to one of the IDE ports on the MB. Anyone agree with this belief? </edit> Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 Re: Add-in PCI IDE Card Matt Newman27-Jan-04 4:53 Matt Newman 27-Jan-04 4:53  Michael Martin wrote: I have an Imation LS-120 drive that has been sitting shrink wrapped on the shelf for the past 8 months looing at me. They still make those? The only problem I can see with your setup plan is you went from 2 HDs and 2 Opticals to 1 HD and 3 Optical. Another thing, just make suer your bootable drives are all on the onboard controller. Matt Newman If you chose to continue this discussion, I am fully prepared to make you my bitch. I invite you to ask around, and you'll find out that I'm quite capable of doing so - John Simmons on Trolls Re: Add-in PCI IDE Card Michael Martin27-Jan-04 12:15 Michael Martin 27-Jan-04 12:15  Matt Newman wrote: They still make those? Don't know, I bought it second hand myself about 8 months ago. Matt Newman wrote: The only problem I can see with your setup plan is you went from 2 HDs and 2 Opticals to 1 HD and 3 Optical. Another thing, just make suer your bootable drives are all on the onboard controller. No, just my inability to type and proof read. The Secondary IDE Master was meant to read the Seagate 80GB HDD. I just stuffed up. The whole purpose of my idea is to put the two HDD's on seperate IDE channels to see if the slowness I am experiencing is caused by IDE conflict. I really can't believe I checked that post twice for mistakes, then modified it and checked it again and still made a glaring mistake. Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 Re: Add-in PCI IDE Card Matt Newman27-Jan-04 17:12 Matt Newman 27-Jan-04 17:12  Michael Martin wrote: No, just my inability to type and proof read. The Secondary IDE Master was meant to read the Seagate 80GB HDD. I just stuffed up. The whole purpose of my idea is to put the two HDD's on seperate IDE channels to see if the slowness I am experiencing is caused by IDE conflict. The only problem I could see is the inability to boot from an optical drive. Matt Newman If you chose to continue this discussion, I am fully prepared to make you my bitch. I invite you to ask around, and you'll find out that I'm quite capable of doing so - John Simmons on Trolls Re: Add-in PCI IDE Card Michael Martin27-Jan-04 17:46 Michael Martin 27-Jan-04 17:46  Matt Newman wrote: The only problem I could see is the inability to boot from an optical drive. I'm pretty sure I will be able to boot from the DVD-ROM or CD-RW that will be plugged into the PCI IDE card. I have the 80GB HDD plugged into it in the computer at work and the system boots from that HDD. So in theory the optical drives should still be bootable on my machine. Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 How do you uninstall compiled software on Solaris Anonymous26-Jan-04 9:31 Anonymous 26-Jan-04 9:31  Hey everyone, I installed the wrong verson of apache (Apache 2.0) and I need to install Apach 1.3. I compiled the Apache 2.0....does anyone know how to uninstall after you have compiled the software??

Last Visit: 31-Dec-99 18:00     Last Update: 2-Jul-24 9:01 Refresh ᐊ Prev1...381382383384385386387388389390 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.