|
Thanx for all the input ya'll. This is the solution that I finally came up with. I've never created my own function so, that was the part that got me. This was actually in the school book (just the function not the code) in next weeks lesson area.
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim a As String
Dim b As Integer = 1
Do While b = 1
a = InputBox("Enter a word to find out if it's a Palindrome.")
If reverse(a) = a Then
MsgBox("This word is a palindrome.")
Else
MsgBox("This word is not a palindrome.")
End If
If a = "z" Then
b = b + 1
End If
Loop
End Sub
Function reverse(ByVal info As String) As String
Dim m, j As Integer, temp As String = ""
m = info.Length
For j = m - 1 To 0 Step -1
temp &= info.Substring(j, 1)
Next
Return temp
End Function
A lot of this is not really necessary however, I figured it was a good chance for a lil practice.
Thanx again for all the input 
P.S. Sorry about the Lounge post that was my second post here and I was in a rush so didn't read the rules :P won't happen again 
|
|
|
|
|
Interesting, two different solutions for the same thing.
I think reversing the word and checking whether it's the same as the original word is the easiest,
which reminds me to always look at a problem from a different point of view .
|
|
|
|
|
An issue you may be running into is your Dim statement. I'm not sure if you're using 6.0 or .NET (and I've yet to touch .NET), but with 6.0 you have to have a declaration type with each variable. For example,
Dim a as String, b as String
instead of
Dim a, b as String
The way you have it now, a is declared as a Variant which is basically a catch all variable type and extremely inefficient  . I avoid them like I would a FORMAT C:.
Since I avoid playing around with them, I'm not sure about their little quirks and personalities, however, you're performing a lot of functions that work best with strings.
What is b used for? I don't see it in your code at all except at Dim.
--------------------
Tim Perry
"Remember, comments are there to make people laugh, not to help them fix your code later...because you're code is always perfect"
|
|
|
|
|
i believe the code you want is:
if a.substring(0,1)=a.substring(length-1,1)
rather than
if a.substring(0,1)=a.substring(length, -1)
|
|
|
|
|
I'm writing an Windows Forms VB.NET application where the user can type in some kind of compare evaluator.
Example :
{cost} > 10000 and {itemgroup} = 'A01'
My app. will take the entered text and evaluate it against in-memory data.
The values tags ( {cost}, {itemgroup}, etc.) are replaced with the proper values by my app before evaluation/parsing... so my question is :
Is there a simple way of parsing or evaluating a dynamic statement in a string ?
Something what would work like this :
dim strStatement as string = " 780 > 10000 and 'B54' = 'A01' "
if EvaluateStatement(strStatement) then
' Do some stuff..
else
' Do some other stuff..
end if
Do I need to code my own evaluator from scratch or is there a shortcut or code I can use... maybe a 3rd party control ?
Any advice ?
TIA 
|
|
|
|
|
Hello,
I am a getting this error when trying to run my app on a PC that doesn't have VB6 installed. I have a form with an adodc connecting to a DSN, and some controls bind to it.
When trying to do some action, like addnew EOF, I get this error:
Run-time Error '91': Object Variable or Block Variable Not set
First I thought about my dependecy files, which I believe no one is missing in my VSInstaller project.
I downloaded the runtime VB6 files from microsoft, and de ado runtime files ans the mdac_type.exe all installed on the target PC.
But nothing of this seems to work.
I've installed it on two other PC's with vb6 installed and it runs fine.
Any ideas, of what could be happening here?
-Alfred
|
|
|
|
|
It sounds like you have code that is not handling an error correctly or at all. You are probably assuming in one line of code that is, say, returning a dataset sucessfully, but in actualality it generates an error or returns a Nothing object reference, then your trying to use that reference. An example of this would be:
Dim objRecordSet as RecordSet
objRecordSet.Next
This would generate the error your talking about because objRecordSet doesn't actually point to a RecordSet object.
RageInTheMachine9532
|
|
|
|
|
Well, you are right, and I just found out that the problem is that my recordset is not been opened. and that was giving me that error.
As I said, When I run this app on any PC that had VB6.0 previously installed, it runs fine, but when I run it on a new PC it doesn´t open my recordset.
It seems that some dll is missing on the target PC.
I am using an adodc data control connecting through ODBC to an access database. Do you know which other should be included when distributing?
|
|
|
|
|
You could probably take the shotgun approach to killing the problem(s) by installing the latest MDAC from Microsoft. You can find that here[^].
RageInTheMachine9532
|
|
|
|
|
I have a form with a textbox and i want to populate the textbox with the CPU time for a program called program.exe How do i specify showing only the CPU time for the one executable I want?
|
|
|
|
|
You can get the TotalProcessorTime and UserProcessorTime using the Process class. Docs for which can be found here[^].
RageInTheMachine9532
|
|
|
|
|
Sir i want to creat a Vc++ system wide hook dll.{{Whatever hook articles available on the internet are intended for advanced developers who know thing or 2 in vc++.}}But students like me who are new to vc++ find it difficult to grasp some ideas.
I want a basic level explanation from some experts who really wants to teach those things to their students.
The hooks i am intended to create is Wh_Getmessage and i have to call that dll from vb6
Say my objective of this hook is say if i a user type A then i have to change to B for any application running.
I am a stranger to vc++ so i need help in how to create this {{system wide}} wh_getmessge hook
1.In vc++ in new what dll i have to chose ]
a.MFC appwizard Dll
b.WIn32 Dynamic link library
What is the difference between these 2 dlls.?
2.What is an header file and what are the things we have to declare here and why we have to declare??
3.How functions in vc++ dll should be declared inorder to call those functions from vb.?
4.Say i am calling SetHook funciton from vb which is in dll then hook is set.
MsgFilterHook = SetWindowsHookEx( WH_GETMESSAGE,(HOOKPROC)MsgFilterFunc, dll_hInstance, threadID );
I am having the hookhandle in MsgFilterHook which i can use to unhook this hook.
Threadid = 0 to create a system wide hook
MsgFilterFunc is my callback function
My doubt is once hook is set , will the system automatically call my callback filter function for any application which process getmessage
Say i have notepad and i am typing A and in my call back function i will get a wm_char = A.NOw if i change to another application say wordpad and type B
then will it be possible to get the wm_char=B message in my callback function.Please Explain me how does this work.
5.Say n no of editor applications are running and i want to disable the character T from going to any application and i have to make T into H how to do this in my callbackfunciton.Issue in this question is how am going to get these hook work for any application which is running.??
Issues
1.How to start creating a dll in vc++6
2.Header file decleration ideas.
3.Export functions declerations.
4.Explanations of how these hook work on a systemwide basis(i understood how dll maps the memory of other applications but wanted codings point of view like what are the parameters come to callback function each time a new application is actvated.)
5.What is #pragma and shared data segment ?How variables should be decalred in the hook dll and how it should be accessed??Please explain at a lower level how this things are implemented why is the need?
Thanks in advance.
|
|
|
|
|
Is there a way that i can monitor the use of a file in terms of a timestamp? My goal is to monitor the activity of a file and when it goes beyond 10 minutes of non activity I will shut it down.
|
|
|
|
|
Not reliably. You don't have to actually run the executable to change its 'Last Accessed' attribute. Just getting properties on the file will change it.
A better method would be to poll and watch the process list, look for the name you want and get its process ID when it shows up, then monitor that ID for CPU usage. You could get those statistics from the Process class.
RageInTheMachine9532
|
|
|
|
|
I'm a .NET programmer who knows how easy it is to access special folders via the Application.CommonAppDataPath and System.Environment.GetFolderPath() members, but how does one do this in VB 6?
|
|
|
|
|
GetSystemDirectory API to get system directory
GetWindowsDirectoryAPI to get windows directory
GetTempPath API to get temp directory
SHGetSpecialFolderLocation,SHGetFolderLocation are also useful
look msdn for details
|
|
|
|
|
 I am a C++ prgrammer but have very little VB experience.
Could someone help me with the following:
I have Win32 dll, and need to call a function from VB:-
code:--------------------------------------------------------------------------------
int WINAPI SCN_Open_Device(HWND, LPDWORD, LPSTR, LPSTR, LPSTR, LPSTR, LPWORD);
--------------------------------------------------------------------------------
I have declared the function as
code:--------------------------------------------------------------------------------
Declare Function SCN_Open_Device Lib "D:\My Projects\Development\Phillipines\VB1\scn_scsi.dll" (ByVal hwnd As Long, ByVal num_device As Long, ByVal vendor_model As String, ByVal product_version As String, ByVal periph_name As String, ByVal path_ini_file As String, ByVal dll_version As Integer) As Integer
--------------------------------------------------------------------------------
And called the function from Vb as follows:
code:--------------------------------------------------------------------------------
Dim Par1 As Long
Dim Par2 As String
Dim Par3 As String
Dim Par4 As String
Dim Par5 As String
Dim Par6 As Integer
Dim Result As Integer
Result = SCN_Open_Device(Form1.hwnd, Par1, Par2, Par3, Par4, Par5, Par6)
--------------------------------------------------------------------------------
But I get a crash.
Could someone tell me what I am doing wrong?
I guess my data types are incorrect ???
Eternally grateful to anyone who helps me
Rich
|
|
|
|
|
This might help, but the final five parameters are to be pointers and the only way to have VB pass a pointer would be in the function definition to use the clause 'ByRef' instead of using 'ByVal'. Having said that though, I suspect that 'String' types in VB are not the same as the 'string' types in C++. AFAIR I had to declare my C routine in the DLL as "pointer to a pointer to a type" in order to get things to work properly. Also I'm not sure whether the WINAPI is a std_call or not. The calling convention is pretty important to get correct for all these things to work.
Chris Meech
It's much easier to get rich telling people what they want to hear. Chistopher Duncan
I can't help getting older, but I refuse to grow up. Roger Wright
I've been meaning to change my sig. Thanks! Alvaro Mendez
|
|
|
|
|
 I'm working on a class (.dll) that i'm willing to publish on the internet.I'm desiging the class in VB.Net and the thing is that i want the users who implement my class in their projects to see characteristics of the methods they're using when they point at them in the object browser window ( you know when u wanna use a method or a function u must understant its behavior).
I know that i can attach with my class a document file that explains the summary of the methods that class offers but i wanted it to be more prfessionnal.
So is there any way i can do this?
Joe Zeitouny
zeitounybros@hotmail.com
|
|
|
|
|
You can add your descriptions using attributes directly in your code. But, you still might want to include a documentation file of some kind to be complete.
Search in the help for Visual Basic.NET for 'Attributes and Design-Time Support' for how to add descriptions and whatnot to your code.
RageInTheMachine9532
|
|
|
|
|
Does anyone have vb.net code to kill a window using win32 api?
|
|
|
|
|
What do your mean by 'kill a window'?
If your looking to kill a 'window', you can't.
If you mean kill the process that owns the window, then you might want to look here[^] for considerations and methods to accomplish this.
RageInTheMachine9532
|
|
|
|
|
Yes, I suppose it is the process. The link you sent was good but I need if for vb.net
|
|
|
|
|
I haven't been able to come up with a VB.NET sample of the same thing, but there is no reason why the sample cade can't be converted into VB.NET using calls into the Win32 API.
RageInTheMachine9532
|
|
|
|
|
SELECT Sum(Amount) as "Total Expenditures", Month(eDate) as "Month"
FROM Expenditure
GROUP BY Month(eDate)
ORDER BY Month(eDate)
Above is my current SQL statement. I would like to change it so that it would generate a table that shows zeros for months that have zero "Total Expenditures". Currently it only shows amounts for months that have
total > 0. I think I could do it once I get it into my datatable but the query would be nicer.
Thanks
"It has become appallingly obvious that our technology has exceeded our humanity."
- Albert Einstein (1879-1955)
"I think there is a world market for maybe five computers."
- Thomas Watson (1874-1956), Chairman of IBM, 1943
"640K ought to be enough for anybody."
- Bill Gates (1955-), in 1981
"Half this game is ninety percent mental."
- Yogi Berra
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
