|
A simple approach might be to read the original parameters into a vector and then pass the vector to the function that will be responsible for reconstructing the parameter list. Doing something like this wouldn't affect the number of parameters present in the "wsprintf" function.
If the original "wsprintf" function contains two parameters, then two parameters are what the vector will contain, but if it turns out that the "wsprintf" contains 3, or 4, or 5, (etc.) parameters, then that's the number of parameters the vector will contain. Afterwards, you simply pass the vector itself as a parameter to the function that will be responsible for reconstructing the new parameter list you will need.
William
Fortes in fide et opere!
|
|
|
|
|
This wouldn't work in this situation since I eventually need to pass the arguments to the original wsprintf function (in this example). Creating the vector would be easy. Taking that vector and reading out each argument would be easy. Calling wsprintf appropriately with these arguments would NOT be easy (perhaps impossible?). That's the problem in general. Create a variable length argument list on the fly.
Since I'm doing a DLL Hook on a function, I get called exactly like the original function. I then want to do a bit of processing and then call the original function. There's no reason for me to put in an intermediate function that uses vectors to pass the variable length arguments since I still have to put a variable length argument list together (the whole problem to begin with).
|
|
|
|
|
While the vector approach (I previously mentioned) would work, I agree, it could be a pain to go that route.
Perhaps a simpler approach might be to just pass the address of "wsprintf" itself as a parameter, and then activate its address (which would be activating wsprintf itself). IOW, handle wsprintf as a pointer to a function.
The address of "wsprintf" is the name itself. Include the name as an extra parameter in the DLL Hook function that gets called, and at the appropriate time simply use it as you would at any other time. For example:
void DLLHookFunc(etc., wsprintf);
wsprintf(parameter1, ...);
William
Fortes in fide et opere!
|
|
|
|
|
Based upon a post on microsoft.public.vc.language I just made and got a response on, I think the best bet would be to make my function not affect the stack at all (declspec naked), possibly do some inline assembly to get the parameters passed in without affecting the stack (no pops), and then doing an assembly JMP to the original function.
That would insure the parameters are on the stack just like they were passed in, and it would allow me not to worry about recreating the variable length argument list. It's going to be a pain to pull off with my assembly skills though  .
|
|
|
|
|
Good luck to you on whichever way you choose.
I still think passing 'wsprintf' as a pointer parameter in the DLL Hook function and then later use it as you normally would, is the simplest way.
William
Fortes in fide et opere!
|
|
|
|
|
I'm not quite sure what you mean by that. For simplicity sake, don't worry about the DLL Hook portion of this problem. Attempt to write a function that generically wraps printf for instance that you can call exactly like printf.
|
|
|
|
|
I keep returning to the days when I only programed in 'C'. The following should help, it is out of my old dos windowing library and is still valid even in 'C++' (MS).
int w_printf(
int r,
int c,
int color,
unsigned flags,
const char *format,
)
{
int n=-1;
char *buf=NULL;
size_t size=0;
va_list ap;
va_start( ap,format );
while( n == -1 ) {
size += 128;
if( buf ) free(buf);
buf = (char *)malloc(size);
if( !buf ) n = 0;
else n = _vsnprintf(buf,size,format,ap);
}
va_end(ap);
if( buf ) {
n = w_pfmt( r,c,color,flags,buf );
free(buf);
}
return n;
}
INTP
|
|
|
|
|
This perhaps will require some creativity (then again, maybe not).
I am looking for a way to store multiple different class names and their addresses in an array or a vector (it doesn't matter). Right now, because the classes are of different types, the array (or vector) cannot be of one type, and the closest thing which comes to doing what I'm trying to accomplish, is by creating an array of type "void" and then re-cast the objects back to their original type.
While that may work, it seems a little on the awkward side, and was wondering whether anybody might have a better idea of coming up with a different way.
Thanks for any insight.
William
Fortes in fide et opere!
|
|
|
|
|
Remember that the address of an object (an instance of a class) is just a 32-bit value. Those can be stored and cast accordingly.
Five birds are sitting on a fence.
Three of them decide to fly off.
How many are left?
|
|
|
|
|
First of all, let me take a shot at answering your little quiz (at the end of your post) about those birds sitting on a fence. How many are left? The answer is FIVE!! because three only decided to fly off. They actually didn't do it.
With regards to my question, your answer is pretty much the same as storing the addresses as type "void" and then re-cast them back to their original type. That is exactly what I had noted (but held back from using that approach because of something better I believe can be achieved).
Specifically, I'm thinking along the line of templates and some ingenuity.
Thanks anyway for your reply.
William
Fortes in fide et opere!
|
|
|
|
|
Templates, boost and STL can provide a type safe solution, but it still isn't perfect.
std::vector< boost::any >
may be what you're looking for. Boost::any uses three classes.
1/ Wrapper class, which stores a pointer to a 2
2/ Abstract implementation class
3/ Concrete template class which extends 2
You still need to use any_cast to retrieve your data, but it effectively only a static_cast, much better than using void*'s
It's worth looking into the theory behind boost::any because you may be able to avoid the use of the any_cast / static_cast if you roll your own with careful modifications to all of the classes.
I've spent a fair bit of time looking at exactly this type of problem and come up with no really satisfying solution. My context was with regards to data pipelining arbitrary data types between 'transforms'. I was trying to provide a generic system easy to use by the less experienced. The real problem when I dug down further was that relationships between our classes (cohesion / coupling) were causing delays in development because of long compile times. My advice? Consider your requirements very carefully - Why are you trying to write this code? What other tools or alternatives do you have - since then we've started looking at weakly typed scripting for rapid development.
If you can keep you head when all about you
Are losing theirs and blaming it on you;
If you can dream - and not make dreams your master;
If you can think - and not make thoughts you aim;
Yours is the Earth and everything that's in it.
Rudyard Kipling
|
|
|
|
|
Even if the individual classes where dirived from the same virtual base class you would still probably needed to eventualy re-cast any object object with aditional functionality
to the original type.
According to what you have written I would write a function to handle each of the possible individule class types stored in the array and cast the pointer base on the class id, or in your case class name, and pass it to the function designed to handle it.
If all the classes are related in some fundiment way then you should should create a base class common to all of them. For example: If your array is just used to draw a GUI object then you could use multiple inheritance (or not) with one of the base classes only containing a Draw() function that must be difine in all inherited casses, then you will not have to re-cast any of the pointers to retrieved from the array.
But if none of the classes has any thing in common then why would they be in the same array. That would not make since and you would have no choice but to re-cast them.
INTP
|
|
|
|
|
Thanks for your reply.
This is what I've come up with so far, and it pretty much gives an idea of the direction in which I'm heading.
template<typename T1>
struct MyStruct
{
typedef pair<string, T1<big>&</big>> CLASSINFO;
string className;
static CLASSINFO make_pair <string clsName, const T1<big>&</big> clsRef>
};
typedef int (*PF)(MyStruct<big>&</big> mySt); The compiler complained about, "use of class template requires template argument list". What is it that I'm missing?
typedef int (*PF)(MyStruct<T1><big>&</big> mySt); The proper "#include" statements are present.
Thanks.
William
Fortes in fide et opere!
|
|
|
|
|
How do i get folder path with CFiledialog? I know if I call the GetPathName()
It will return the Full path to specific folder. but in order to close the CFileDialog i have to click on either Save or Open.
Thanks
Shin
|
|
|
|
|
sdfdsfa wrote:
but in order to close the CFileDialog i have to click on either Save or Open.
Which is the whole reason for using CFileDialog in the first place. It sounds like you want to use SHBrowseForFolder() instead.
Five birds are sitting on a fence.
Three of them decide to fly off.
How many are left?
|
|
|
|
|
Thanks David,
I downloaded the sample program for SHBrowserForFolder() from codeproject.
That was it.
Thank you very much.
Shin
|
|
|
|
|
I have a CFormView with buttons in it. My application is a tic-tac-toe application, i would like to save the game before it is completed and be able to open it. how do i serialize it?
|
|
|
|
|
Search CP and MSDN for examples of serialization. Basically, the document object holds the state of the game. When the game is altered in any way (e.g., a move is made), the document should be marked as "dirty." Then when the game is exited, the document's Serialize() method will get called. It's at that point that you'll write to the CArchive object.
Five birds are sitting on a fence.
Three of them decide to fly off.
How many are left?
|
|
|
|
|
See is how you are using CFormView I assume that you have a document class assotiated with it.
1) Open you document class and find Serialize().
2) if( ar.IsStoring() )
{
ar.Write(...);
}
else
{
ar.Read(...);
}
With a little effort and reasearch in MSDN you should have not problem.
P.S. This looks like a college assignment I had once add (accept in 'C' not MS 'C++').
After you get complete the assignment and get a grade, please send be a copy and I'll send you one of my versions (C,C++,VB), there are only to possibilies 1) possible and imposseble to beat.
INTP
|
|
|
|
|
Hello!
I have written small app in VC.NET and tried to run it on Win98. It complains about oleacc.dll. How to get rid of this dll from my app??
Anybody knows?
Please help 
|
|
|
|
|
You have to delay the loading of the oleacc.dll file. By doing this, the dll will only get loaded if your app requires it, not automatically when your app starts.
1.) Link to delayimp.lib
#pragma comment (lib, "delayimp.lib")
2.) use the /DELAYLOAD:oleacc.dll linker option
Project
+-- Properties
+-- Linker
+-- Input
+-- Delay Loaded DLLs -> oleacc.dll
3.) use the /DELAY:UNLOAD linker option
Project
+-- Properties
+-- Linker
+-- Advanced
+-- Delay Loaded DLL -> Support Unload (/DELAY:UNLOAD)
Version 7.0 of Dev Studio
Sonork 100.11743 Chicken Little
"You're obviously a superstar." - Christian Graus about me - 12 Feb '03
Within you lies the power for good - Use it!
|
|
|
|
|
Hello!
I didn't look correctly. Oleacc.dll is not loaded by me by explicit. It is loaded by shell32.dll. It is present on WinXP, but not on clean installation of Win98 secont edition.
Anyone knows sth about this horror dll?
Thanks for help!
|
|
|
|
|
|
called from here:
#include "file1.h"
func.cpp
{
AF_TXT_FILE = OPEN_AIRFIELD_TXT_FILE(FILENAME);
}
file1.ccp
FILE * OPEN_AIRFIELD_TXT_FILE(char *FILENAME)
{
//function here
}
file1.h
FILE * OPEN_AIRFIELD_TXT_FILE(char *FILENAME);
Here is the ERROR:
error LNK2001: unresolved external symbol "struct _iobuf * __cdecl OPEN_AIRFIELD_TXT_FILE(char *)" (?OPEN_AIRFIELD_TXT_FILE@@YAPAU_iobuf@@PAD@Z)
I hope this make sense as I've took out a lot of code and makde up short names and such.
|
|
|
|
|
Just guessing, but is file1.cpp part of the project and if not, does it compile with no errors in whatever project it is in? If it is in a separate project, do you link with the .lib or .o file produced in that project?
Chris Meech
It's much easier to get rich telling people what they want to hear. Chistopher Duncan
But for a man, barbecuing eggplant and portobello mushrooms is a sure way to have people question your sexual orientation. Kuro5hin
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
