|
No, as pointed out in the article you reference, "it will run perfectly without any modification to your existing code." This means that the code is the same regardless if you encrypt the web.config or not.
I suggest looking in the event viewer because it does not seem like the encrypt/decrypt issue of web.config is the cause.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
That was my expectation, thank you for the confirmation.
|
|
|
|
|
Hi All,
I am maintaining a Web Application, when I am trying to Publish it I am getting the following error "A namespace cannot directly contain members such as fields or methods" and I am positive that C# won't allow me to have methods directly under a namespace without class.
The above error doesn't give me any information, hence I am researching online for help, please if anybody knows about this, can you please help me by a suggestion, a link or a code snippet. It helps me a lot.
Thanks in advance.
Thanks,
Abdul Aleem
"There is already enough hatred in the world lets spread love, compassion and affection."
|
|
|
|
|
|
How do I save the values entering into textbox that is dynamically created to database
My Code
for (int i = 0; i < Grid.Rows.Count; i++) //Grid.Rows.Count
{
//TextBox CC = (TextBox)Grid.Rows[i].Cells[2].FindControl("txtCA");
//TextBox CC1 = (TextBox)Grid.Rows[i].Cells[2].FindControl("txtCA") as TextBox;
string StdMat = Grid.Rows[i].Cells[0].Text;
string CA = ((TextBox)Grid.Rows[i].Cells[2].FindControl("txtCA")).Text;
string UserID = Grid.Rows[i].Cells[1].Text;
Response.Write("CA= " + CC1 + "<br>");
MySqlCommand cmdd = new MySqlCommand("UPDATE resultstable2 SET CA=@ca WHERE student_ID=@student_ID", conn);// coursecode=@coursecode
cmdd.Parameters.AddWithValue("@ca", CA);
cmdd.Parameters.AddWithValue("@coursecode", cboCourseCode.Text);
cmdd.Parameters.AddWithValue("@student_ID", StdMat);
cmdd.ExecuteNonQuery();
}
-- modified 11-Jan-16 7:02am.
|
|
|
|
|
Where do you stuck. Error comes in which line number. or What is the error
hi
|
|
|
|
|
Hi,
I am using CodeSmith NetTier for DAL creation, can anybody give me idea how to use Stored Proc in NetTier and CodeSmith.
Thanks,
Abdul Aleem
"There is already enough hatred in the world lets spread love, compassion and affection."
|
|
|
|
|
Dear Friends I am new MVC world & working in a project. I want to fill some html.editfor fields on a button click. My tried the given below codes:
Controller action:
[HttpPost]
public JsonResult GetRecordById(string id)
{
var record = dc.TABLE1.FirstOrDefault(x => x.PART_NO == id);
var result = new
{
Name = record.PARTI,
Type = record.TYPE
};
return Json(result, JsonRequestBehavior.AllowGet);
}
VIEW:
<script type="text/javascript">
$(function () {
$("#txtParti").autocomplete({
source: '@Url.Action("GetParti")'
});
});
$(function () {
$("#txtPtno").autocomplete({
source: '@Url.Action("GetPtno")'
});
});
$('#BTNFET').onclick(function (fetrec) {
var recordId = this.value;
$.post('@Url.Action("GetRecordById")',
{
"id": recordId
},
function (data) {
$("#txtParti").val(data.Name);
$("#Type").val(data.Type);
});
});
</script>
<input type="button" id="BTNFET" onclick="fetrec();" />
@Html.EditorFor(model => model.PARTI, new { htmlAttributes = new { @class = "form-control", @id = "txtParti", @placeholder = "PART NAME" } })
@Html.EditorFor(model => model.PART_NO, new { htmlAttributes = new { @class = "form-control", @id = "txtPtno", @placeholder = "PART NO" } })
@Html.EditorFor(model => model.TYPE, new { htmlAttributes = new { @class = "form-control", @id = "Type", @placeholder = "ITEM TYPE" } })
On the above codes Auto complete part working pefectly, Button click not working. So, friends please help me in this regard.
|
|
|
|
|
It looks like you have more of a JavaScript issue than anything else.
First, remove the onclick handler for the HTML tag, it's extraneous and basically binds a null event to the button I don't see a function fetrec defined anywhere, just an anonymous event handler.
<input type="button" id="BTNFET" value="@model.RecordId" /> <!--
Now for the JS. I'm not 100% sure about best practices with jQuery, and $.ajax() might be a better route, but we'll roll with what you have for the moment:
$('#BTNFET').onclick(function (e) {
$.post('@Url.Action("GetRecordById")',
{
"id": e.target.value
},
function (data) {
$("#txtParti").val(data.Name);
$("#Type").val(data.Type);
});
});
Now, in this context the 'this' object should be the event initiator, but that's not a guarantee. The handler will automatically be passed the event as an argument, though, and we can use that to hook the calling HTML element via the 'target' property. This has the benefit of not leaning on 'this' and therefore not needing to add a new variable into the mix.
|
|
|
|
|
|
Hi all..
I have to compare two text box values whether they are equal or less than or greater than like textbox1.text<=textbox2.text...
I am comparing date as string values..
Thanks in advance..
|
|
|
|
|
|
F-ES Sitecore wrote: to covert the string values in the textboxes into DateTime variables, and you can then compare the DateTime variables using ">>" "<" "==" etc.
I would suggest using the
DateTime.Compare Method[^]
My name is Ozymandias, king of kings:
Look on my works, ye Mighty, and despair!
|
|
|
|
|
Why?
The operators[^] return the result of comparing the InternalTicks property for both instances.
The Compare method[^] does almost the same thing, but calculates and returns an integer (-1, 0 or 1), which you then have to test to determine the result. (You also have to remember which value represents which result.)
What benefit do you see in using the Compare method over using the operators, when all you want to do is determine whether one value is less than another?
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I did not realize the operator comparison also used InternalTicks.
I learned something today 
Put that way, there really is no benefit.
My name is Ozymandias, king of kings:
Look on my works, ye Mighty, and despair!
|
|
|
|
|
|
Hi,
I am using a TextBox in my code and a Panel and some Rad controls in it. When I click a button beside the TextBox it opens the Panel as Popup and when makes change to the fields in the Popup and say Save then Popup closes and TextBox should have the changed value. But TextBox is still showing the old value but when I put mouse over its .text field in the code behind it is showing changed value.
Is there any way I can change the showing value of the textbox as well. I tried in all the events by keeping mouse over every event in code behind shows the changed value but still it doesn't show up in the screen.
Any help is appreciated code snippet, link or even any suggestion, thanks in advance.
Thanks,
Abdul Aleem
"There is already enough hatred in the world lets spread love, compassion and affection."
|
|
|
|
|
Could you post some of the code as it sounds like the one you're expecting to change isn't quite the one that you're looking at in debug.
|
|
|
|
|
Hi,
I am new to the Telerik controls, I am using RadEditor, when I don't put the RadAjaxManager its giving me error like AjaxManager doesn't exist, but when I put in my content page, the error is gone and page loads but it is not enabling the RadEditor to edit the values.
Can anybody please help me in this any link, suggestion or a code snippet would help, I am struggling a little bit and I am also researching to find the reasons for it.
Thanks in advance
Thanks,
Abdul Aleem
"There is already enough hatred in the world lets spread love, compassion and affection."
|
|
|
|
|
You'd probably be better off with the telerik forums as they're pretty quick over there, that being said; does it render *anything* at all to the rendered source for the page?
If you could post your code (suitably obfuscated) it'd help.
|
|
|
|
|
Thanks I could able to figure it out, there were not needed elements in the RadAjaxManager.
Thanks,
Abdul Aleem
"There is already enough hatred in the world lets spread love, compassion and affection."
|
|
|
|
|
Can help me about to make online Shopping Website. My query is under:
1. How to add cart
2. how to show product value in repeater (with Image)
3. how to process billing.
4. what is way of return process
Please suggest me my database is in linq (No SQL) so Help me as well as earlier.
Thank You
|
|
|
|
|
You can't learn how to write someone as complex and involved as an ecommerce site from a forum post...you haven't even said what technology you're using. Get a book on c# and one on MVC and go through them and how you do these tasks will become clear (or at least go through some on-line tutorials). You can then ask specific questions about specific tasks if you get stuck.
|
|
|
|
|
LINQ is just a tool in C#, it has nothing to do with data sources. Infact, for LINQ to work, you still need to have a data source for your data objects. SQL Server, NoSQL etc. should all be available for LINQ to work on the collection.
1) Just add a new table which would hold the details for every new order.
Table: Orders
OrderID (int) | UserID (int) | DateTime (Date) | Purchased (bit)
That done, you can now add more items in this. Note that, I am not specifically talking about an SQL table. Instead, I am talking about a "data object" that can store these informations. You can use Entity framework, NoSQL (I have no idea of this!) or plain-text files.
2) There is no such thing as product value. It is the product, and then its value, the amount that has to be charged. That would require plain-HTML code. Just a simple loop. Is that too tough?
3 and 4) Billing would require an eCommerce service, a payment gateway and so on. You should not build it yourself, instead get a third-party service such as PayPal, Skrill or Google Wallet etc. and then allow clients to make a payment. Billing and other return procedures are your own policies. You have to define them yourself as they would be of your interest! You should never ask anyone to build your policies, instead build them yourself. Contact a lawyer or any official or legal personnel and then make up the policies and terms of conditions.
You may mess up with the payment gateways and other services. Trust me, anything that has money involved is a very big lawsuit, and you as a beginner must be aware of that!
Creating a shop website in ASP.NET[^]
The sh*t I complain about
It's like there ain't a cloud in the sky and it's raining out - Eminem
~! Firewall !~
modified 5-Jan-16 6:28am.
|
|
|
|
|
I am developing desktop-apps. Now I want to go to a web-based approach with asp.net mvc as a framework.
I want to skip the Silverlight-approach and instead want to do it html5-JScript-based (with asp.net mvc).
I do not have such kind of modern high-end-multimedia screens. Instead, my requirement is to keep the "usual desktop like UI" as menues, win-forms, .... for showing things like datagrids
Can you give me some hint how to make the first steps?
Thank you in advance
modified 4-Jan-16 15:46pm.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
