C / C++ / MFC

7-Jun-12 23:49

Hi,

I have a CFormView derived class named CCatalogView. The Dialog Form was designed using the VS2008 resource editor.

I also created a new method inside the CCatalogView like the follow :

C++

CWnd* CCatalogView::CreatePane(CWnd* pParentWnd)
{
  if (GetSafeHwnd() == 0){
      VERIFY(Create(_T("CatalogView"), NULL, WS_CHILD | WS_VISIBLE | WS_CLIPCHILDREN | WS_CLIPSIBLINGS, CXTPEmptyRect(), pParentWnd, NULL, 0));
				 
  }
  return this;
}

While I can show the content of this FormView inside a pane, when I exit from the application I get a memory error :
===================================
Windows has triggered a breakpoint in Test.exe.

This may be due to a corruption of the heap, which indicates a bug in Test.exe or any of the DLLs it has loaded.

This may also be due to the user pressing F12 while Test.exe has focus.

The output window may have more diagnostic information.
====================================

I have already found a solution, and that was to use the

create

method, outside of the class CCatalogView as with the following code :

C++

m_pFormFrame = new CFrameWnd;
CCreateContext context;
context.m_pNewViewClass = RUNTIME_CLASS(CCatalogView);
context.m_pCurrentDoc = NULL;

m_pFormFrame->Create(NULL, NULL, WS_CHILD|WS_VISIBLE|WS_CLIPCHILDREN|WS_CLIPSIBLINGS, CRect(0, 0, 0, 0), this, NULL, 0, &context);
 m_pFormFrame->SendMessageToDescendants(WM_INITIALUPDATE, 0, 0, TRUE, TRUE);
 pPane->Attach(m_pFormFrame);

Now the question is : Why the 1st part of the code corrupts the heap ? I suspect the the "Create" is constructed to the heap instead of the stack that I assume.

If that is true, can I modify the code to make it work ?

Best Regards,

sdancer75

Rolf Kristensen8-Jun-12 2:01

Rolf Kristensen

8-Jun-12 2:01

I can recommend using Application Verifier[^] and then run your application within a debugger. Then it should break the application at the initial corruption of the heap.

Application Verifier is part of the Windows SDK[^]

Erudite_Eric8-Jun-12 2:35

Erudite_Eric

8-Jun-12 2:35

Yep, verifier, it is a good tool.

==============================

Nothing to say.

sdancer758-Jun-12 6:02

8-Jun-12 6:02

Thanks,

I didn't used Application Verifier before.

Does it run under the VS2008 IDE ?

Regards,

sdancer75

Aescleal8-Jun-12 3:00

Aescleal

8-Jun-12 3:00

You're calling two completely different functions! In the first example you're calling CCatalogView::Create, in the second you're calling CFrameWnd::Create.

As to why it's failing.. I can't tell exactly but one idea is that you're creating the CCatalogView as an automatic object. When you call CreatePane a WIN32 window object is created. When the pane window (as in the WIN32 window) is destroyed it tells the CCatalogView to do a delete this;. As the C++ object is on the stack delete goes a bit haywire.

In the second case everything's allocated on the heap. You CCatalogView is implicitly created on the heap by CFrameWnd::Create. When the WIN32 window objects are destroyed the delete this; works the way it should do and everything's cool.

Just out of interest all this delete this; rubbish generally happens in whatever override of CWnd::PostNCDestroy gets called. As a general rule always create MFC C++ window objects on the heap, unless it's a modal dialogue when it's safe to create it on the stack.

sdancer758-Jun-12 6:03

8-Jun-12 6:03

Thank you for your reply.

I am not sure if this is the real problem.... I will search more about this.

Regards,

sdancer75

sdancer759-Jun-12 3:43

9-Jun-12 3:43

As you can see "Call Stack" stops at _CrtIsValidHeapPointer. It seems that is trying to free the CCatalogView Object but it fails. Maybe that means that somehow the CCatalogView class has alreaded deleted from the memory. What is your opinion ?

ntdll.dll!77470724()
[Frames below may be incorrect and/or missing, no symbols loaded for ntdll.dll]
ntdll.dll!7743295a()
ntdll.dll!77401997()
KernelBase.dll!760d4bf9()
> Gnosis.exe!_CrtIsValidHeapPointer(const void * pUserData=0x03387e2c) Line 2103 C++
Gnosis.exe!_free_dbg_nolock(void * pUserData=0x03387e2c, int nBlockUse=12582916) Line 1317 + 0x9 bytes C++
Gnosis.exe!_free_dbg(void * pUserData=0x03387e2c, int nBlockUse=12582916) Line 1258 + 0xd bytes C++
Gnosis.exe!CObject::operator delete(void * p=0x03387e2c) Line 42 + 0xe bytes C++
Gnosis.exe!CCatalogView::`scalar deleting destructor'() + 0x3c bytes C++
Gnosis.exe!CView::PostNcDestroy() Line 121 + 0x21 bytes C++
Gnosis.exe!CWnd::OnNcDestroy() Line 864 C++
Gnosis.exe!CWnd::OnWndMsg(unsigned int message=130, unsigned int wParam=0, long lParam=0, long * pResult=0x0018e038) Line 2042 C++
Gnosis.exe!CWnd::WindowProc(unsigned int message=130, unsigned int wParam=0, long lParam=0) Line 1755 + 0x20 bytes C++
Gnosis.exe!AfxCallWndProc(CWnd * pWnd=0x03387e2c, HWND__ * hWnd=0x001906d6, unsigned int nMsg=130, unsigned int wParam=0, long lParam=0) Line 240 + 0x1c bytes C++
Gnosis.exe!AfxWndProc(HWND__ * hWnd=0x001906d6, unsigned int nMsg=130, unsigned int wParam=0, long lParam=0) Line 403 C++
user32.dll!76126238()
user32.dll!76127298()
user32.dll!76126899()
user32.dll!76127177()
user32.dll!76131e3a()
ntdll.dll!773b00e6()
user32.dll!76131e83()
Gnosis.exe!CWnd::DestroyWindow() Line 1007 + 0xd bytes C++
b60f0004()

sdancer75

Aescleal9-Jun-12 9:51

Aescleal

9-Jun-12 9:51

Either you've stuck the CCatalogView on the stack and PostNcDestroy is trying to delete it when the WIN32 window is being deleted OR you're stashing a pointer to the CCatalogView some where and deleting it. It may be hidden if you've stored it as a pointer to one of it's parent classes.

sdancer759-Jun-12 23:58

9-Jun-12 23:58

Thank you Aescleal,

Yes the CCatalogView is created on the stack and I did know that from the beggining, but I was wondering about the time are happenning all these things.

1. I create on the stack the  CCatalogView

2. Inside the CCatalogView class I create a Win32 Window (using Create). Really, does this window is created on the heap or in the stack ? I assume that is created on the stack. Anyway, I tried to explicitly create this window on the heap, using new (on the CreatePane) & delete (on the destructor) functions  but it also fails.

3. Now, according to my assumptions that both objects are in the stack, at the exiting procedure, it disposes first the last inserted item which is the Win32 Window (as I mentioned, I assume it created on the stack) and then the CCatalogView class itleft.

What's of the above assumptions are wrong ? That is what I did not understand.

Regards,
George

PS: Reading your comment again, you assume that the MFC Framework when is trying to delete the Window itself, is deleting also the class that is associated with that window. Maybe, is something that I did not understand well. Can you please clarify that ?

sdancer75

sdancer7512-Jun-12 3:18

Exception when debugging Multithread

12-Jun-12 3:18

Ok, I found the cause of the problem.

The default for views is to allocate them on the heap and the default post-cleanup is to 'delete this'.

So, in my situation I created the window in the stack, like it shows below.

C++

VERIFY(Create(_T("MyWind"), NULL, WS_CHILD | WS_VISIBLE, CXTPEmptyRect(), pParentWnd,  IDD_TABSHEET2, &context));

The default behavior of the CView cleanup is to delete this. Indeed, if you check inside the viewcore.cpp you will see, something like this :

C++

// self destruction
void CView::PostNcDestroy()
{
	// default for views is to allocate them on the heap
	//  the default post-cleanup is to 'delete this'.
	//  never explicitly call 'delete' on a view
	delete this;
}

That thing is all screwed up in my case. The solution ? Just override the CCatalogView::PostNcDestroy and comment the CFormView::PostNcDestroy(); to prevent calling the CView::PostNcDestroy.

C++

void CCatalogView::PostNcDestroy()
{
	// TODO: Add your specialized code here and/or call the base class
	_ASSERTE( _CrtCheckMemory( ) );

	//Don't call default PostNCDestroy which it calls CView:: delete this
	//because you get a heap corruption since the view is created on the stack.
	//CFormView::PostNcDestroy();


}

Hope, it helps someone.

Regards,

sdancer75

ForNow7-Jun-12 19:04

ForNow

7-Jun-12 19:04

Hi,

I am getting an exception when debugging a application after invoking CWinThread

The following is my invocation of AfxBeginThread

<pre lang='cpp'>
AfxBeginThread(RUNTIME_CLASS(SockCLeintThread),
THREAD_PRIORITY_NORMAL,
0,CREATE_SUSPENDED);

</pre>

The way I read the documentation if the first parm is CRuntimeClass* pThreadClass
the way I have it coded then its a UI thread

However while debugging the application and looking at the Thread DEBUG->
WINDOWS->THREADS The Visual Studio debugger marks the thread as a worker thread

I create the thread in a modal Dialog after at the end of one of the methods of modal dialog box I destory the modal dialog box via EndDialog don't know if this a issue

Also can sone one tell me What the /MD and /MT linker options are

Thanks

«_Superman_»7-Jun-12 19:15

«_Superman_»

7-Jun-12 19:15

It is probably because the thread is in a suspended state and has not started running.

«_Superman_»
I love work. It gives me something to do between weekends.

Microsoft MVP (Visual C++)

Polymorphism in C

ForNow7-Jun-12 23:53

ForNow

7-Jun-12 23:53

I resume the thread

myprog->progsocket->ResumeThread(); // get it going

However one I comment out anything the destroys e.g. EndDialog the Modal Dialog box whose method

I was while creating the CWinThread the exception disappears

I am wondering since I create a UI thread it associates the CWinThread with the modal

Dialog Box and when the modal Dialog Box disappears it destroys anything associated

with it e.g. the CWinThread object and anything releated to that object

code in question don't know whay my pre tags aren't taking

<pre lang='cpp'>

CprogDebug *myprog; // instantiate a Debug Class modless CDialog derived class

myprog = new CprogDebug; // Allocate on the Heap

if (myprog == NULL)
MessageBox("CprogDebug","CprogDebug Error",MB_ICONERROR);

myprog->jobname = jobname; // copy over jobname
myprog->progname = progname; // copy over progname
myprog->proglisting = dlg.GetPathName();
EndDialog(0); // Kill the Dialog
// dlg.~dlg();

myprog->Create(IDD_PROGDBG,NULL); // Attach it to a window

myprog->progsocket = (SockCLeintThread *) AfxBeginThread(RUNTIME_CLASS)
(SockCLeintThread),
THREAD_PRIORITY_NORMAL,
0,CREATE_SUSPENDED);

if (myprog->progsocket == NULL)
MessageBox("Socket","Prog Socket Error",MB_ICONERROR);

myprog->progsocket->sendwindow = (CWnd *) myprog;
// set window to receive TCP/IP messages
myprog->progsocket->m_pActiveWnd = (CWnd *) myprog; // <== point to newwindow
myprog->progsocket->m_pMainWnd = (CWnd *) myprog; // ditto
myprog->progsocket->ipaddr = "192.168.1.4"; // ip address
CHERC_CMDApp *main_app = (CHERC_CMDApp *)AfxGetApp();
int i = 0;
while(main_app->ports[i].busy != 0)
{
i++;
}
myprog->progsocket->port = main_app->ports[i].port; // port
main_app->ports[i].busy = 1;
// Tcpipthread = progsocket->m_nThreadID; // thread id
// myprog.progsocket->thisocket.send_wnd = myprog.progsocket->sendwindow;
myprog->progsocket->thisocket->send_wnd = (CWnd *) myprog;
strcpy((char *)&myprog->progsocket->thread_id,"DebugSocket");
myprog->progsocket->thisocket->thread_no = i; //
myprog->Tcpipthread = myprog->progsocket->m_nThreadID;
myprog->progsocket->ResumeThread();

</pre>

Event though I explictily point to another modless dialog I create on the heap

while in the modless Dialog Box method

ForNow7-Jun-12 23:58

ForNow

7-Jun-12 23:58

sorry in last sentence I meant Eventhough I explictly destroy the <b> modal </b> dialog box

Erudite_Eric7-Jun-12 20:34

Erudite_Eric

7-Jun-12 20:34

Yeah so this is the kind of problem you get when trying to do things outside the 'usual way of doing it'.

So just create your thread normally and implement your own messaging system as I suggested in your earlier post.

==============================

Nothing to say.

Richard MacCutchan7-Jun-12 21:53

Richard MacCutchan

7-Jun-12 21:53

ForNow wrote:
can sone one tell me What the /MD and /MT linker options are

Check the documentation[^].

speaking as ...

Erudite_Eric7-Jun-12 23:35

Erudite_Eric

7-Jun-12 23:35

Nah, thats too hard. It is easier to type an entire question into CP than those two switches into google....

==============================

Nothing to say.

Calculate checksum using ASLR

Richard MacCutchan8-Jun-12 0:19

Richard MacCutchan

8-Jun-12 0:19

In this case I went direct to MSDN, so no need for Google. Who said TINA?

speaking as ...

Giggsey737-Jun-12 8:39

7-Jun-12 8:39

XML

Hi Guys! I'm a newbie here. I wanna match the PID in Windows Task Manager with the checksum/hash value generated by dynamic base ASLR in Visual Studio 2010? I have already enabled the ASLR in Visual Studio 2010 but no data is received. Any idea how?

<b>Clues:</b>
1. Windows functions CreateToolhelp32Snapshot
2. MODULEENTRY32
3. Windows function OpenProcess

Appreciate it very much guys.

Giggsey

David Crow7-Jun-12 8:43

David Crow

7-Jun-12 8:43

Giggsey73 wrote:
<b>Clues:</b>
1. Windows functions CreateToolhelp32Snapshot
2. MODULEENTRY32
3. Windows function OpenProcess

Are you wanting to know how to use these functions/structures?

"One man's wage rise is another man's price increase." - Harold Wilson

"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons

"Show me a community that obeys the Ten Commandments and I'll show you a less crowded prison system." - Anonymous

Giggsey737-Jun-12 8:46

7-Jun-12 8:46

Yes please. I'm rushing in the middle of a project & need to use this functions? I aint got a clue.
Thanx.

David Crow7-Jun-12 8:55

David Crow

7-Jun-12 8:55

Google was of no help? What exactly did you search for? Did you try this? Another example can be found here.

Giggsey737-Jun-12 9:08

7-Jun-12 9:08

Sori, i need to go to sleep. Smile | :)

Will discuss tmrow then.
Good night.

Giggsey738-Jun-12 8:34