Re: Translate Logical Drive to Physical Drive - C / C++ / MFC Discussion Boards

Translate Logical Drive to Physical Drive

Bram van Kampen10-Aug-09 14:55

10-Aug-09 14:55

I can discover from the trusty old DOS functions on which logical drive I currently am say, drive 'C:', or drive 2. logical drive typically represents a volume on a physical drive, say '\\\\.\\PhysicalDrive0' What API's are there to translate from a locical drive identifier to the physical drive which contains the volume.

regards

Smile | :)

Re: Translate Logical Drive to Physical Drive

Randor 10-Aug-09 17:45

Randor

10-Aug-09 17:45

You could use the IOCTL_STORAGE_GET_DEVICE_NUMBER[^] control code to obtain the physical drive and volume number.

For example:

#include <Winioctl.h>
VOID LogicalToPhysical(TCHAR *szDrive)
{
	CString szPhysical;
	HANDLE h = CreateFile(szDrive, GENERIC_READ, FILE_SHARE_READ|FILE_SHARE_WRITE,NULL,OPEN_EXISTING,0,NULL);
	if(INVALID_HANDLE_VALUE != h)
	{
		STORAGE_DEVICE_NUMBER sd;
		DWORD dwRet;
		if(DeviceIoControl(h, IOCTL_STORAGE_GET_DEVICE_NUMBER, NULL, 0, &sd, sizeof(STORAGE_DEVICE_NUMBER), &dwRet, NULL))
		{
			szPhysical.Format(_T("\\\\.\\PhysicalDrive%d"), sd.DeviceNumber);
		}
		CloseHandle(h);
	}
}

//Usage:
LogicalToPhysical(_T("\\\\.\\\\C:"));

Note that this control code will fail to return correct information for mirrored and striped volumes. A more complete solution for these types of drives would be the IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS[^] control code which will return an array of partitions for the drive.

Best Wishes,
-David Delaune

Re: Translate Logical Drive to Physical Drive [modified]

Bram van Kampen11-Aug-09 11:09

Bram van Kampen

11-Aug-09 11:09

Thanks David,

Exactly the hint I Needed.

Only One Snag, Cannot find the (hex)Value of IOCTL_STORAGE_GET_DEVICE_NUMBER. Could you let me know?

Thanks and Regards,

Rose | [Rose]

Bram van Kampen

modified on Tuesday, August 11, 2009 5:17 PM

Re: Translate Logical Drive to Physical Drive

Randor 11-Aug-09 13:06

Randor

11-Aug-09 13:06

Bram van Kampen wrote:
Cannot find the (hex)Value of IOCTL_STORAGE_GET_DEVICE_NUMBER.

Interesting. They are declared in the Winioctl.h header file.

Some questions:

1.) What development environment are you using?
2.) What version of the Platform/Windows SDK are you using if any?

You can probably get away with dropping these declarations somewhere:

#define FILE_ANY_ACCESS                 0
#define FILE_SPECIAL_ACCESS    (FILE_ANY_ACCESS)
#define FILE_READ_ACCESS          ( 0x0001 )    // file & pipe
#define FILE_WRITE_ACCESS         ( 0x0002 )    // file & pipe

#define METHOD_BUFFERED                 0
#define METHOD_IN_DIRECT                1
#define METHOD_OUT_DIRECT               2
#define METHOD_NEITHER                  3

#define FILE_DEVICE_MASS_STORAGE        0x0000002d
#define IOCTL_STORAGE_BASE FILE_DEVICE_MASS_STORAGE

#define CTL_CODE( DeviceType, Function, Method, Access ) (                 \
    ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method) \
)
#define IOCTL_STORAGE_GET_DEVICE_NUMBER       CTL_CODE(IOCTL_STORAGE_BASE, 0x0420, METHOD_BUFFERED, FILE_ANY_ACCESS)

typedef struct _STORAGE_DEVICE_NUMBER {

    //
    // The FILE_DEVICE_XXX type for this device.
    //

    DEVICE_TYPE DeviceType;

    //
    // The number of this device
    //

    DWORD       DeviceNumber;

    //
    // If the device is partitionable, the partition number of the device.
    // Otherwise -1
    //

    DWORD       PartitionNumber;
} STORAGE_DEVICE_NUMBER, *PSTORAGE_DEVICE_NUMBER;

You should really correctly setup your development environment rather than dropping the above declarations into your project. Are you using VC6 or something?

Best Wishes,
-David Delaune

Re: Translate Logical Drive to Physical Drive

Bram van Kampen12-Aug-09 8:31

Bram van Kampen

12-Aug-09 8:31

Thanks,

My version of Winioctl.h does not contain the Macro for IOCTL_STORAGE_GET_DEVICE_NUMBER, but contains all the other declarations, so, all I really needed was the Function Number (0x420). This Should (and does) work in this instance by 'dropping in', because the underlying mechanism is implemented directly by the OS and the Device Drivers, and not by a linked in compiler library.

Thanks again

regards,
Smile | :)

Bram van Kampen

Re: Translate Logical Drive to Physical Drive

Andy Belton24-Dec-11 21:37

Andy Belton

24-Dec-11 21:37

Many thanks, that solved the problem. I had looked at DeviceIoControl() but my (outdated) Winioctl.h did not have is call param!

Regards
Andy

Re: Translate Logical Drive to Physical Drive

Randor 26-Dec-11 11:13

Randor

26-Dec-11 11:13

Hey Andy,

Great to hear that it solved your problem. Yeah... I am also using old Microsoft compilers such as VC6/2005 and I have them all installed side-by-side. You should probably keep an updated 'Platform SDK'... which I believe has been renamed to 'Windows SDK'.

Somebody should probably post an article or tip that shows which SDK updates are compatible with each compiler... I am somewhat surprised that Microsoft does not have such a document. You cannot use many of the more recent 'Microsoft SDK' packages with older MS compilers. I have actually been successful with modifying some of the later SDK headers to make it work with older compilers... but that's probably not encouraged or supported.

Anyway, good luck with your project. (Why are you working the day after Christmas?) Wink | ;)

Best Wishes,
-David Delaune

Re: Translate Logical Drive to Physical Drive

Andy Belton1-Jan-12 1:40

Andy Belton

1-Jan-12 1:40

Hi David

I was a bit suprised to receive your last mail. Most people don't bother to 'follow up'.

Yes, all my stuff belongs in a museum. But, funds don't permit upgrades yet. I'm now in my 60's after over forty years in computing, single, live alone - hence working over the holidays.

A couple of questions. In your solution you gave this format "\\\\.\\\\%c:". I assume this to be for extended filepath string length support. But the documenation with my old compiler has it as "\\\\.\\"

Is this the norm for extended length support? Users are bound to come up super long path names.

Also, in my application I also access network drives. Does the "\\\\pc name\\drive name\\" give this extended length support?

Regards
Andy Belton

Re: Translate Logical Drive to Physical Drive

Randor 1-Jan-12 2:54

Randor

1-Jan-12 2:54

Hey Andy,

Andy Belton wrote:
A couple of questions. In your solution you gave this format "\\\\.\\\\%c:". I assume this to be for extended filepath string length support. But the documenation with my old compiler has it as "\\\\.\\"

Actually the documentation to your old compiler is correct... for opening the device namespace you need to prepend "\\.\" which as you know escaped looks like "\\\\.\\"

I have no idea why my old code snippit from 2009 contains an extra backslash. I write alot of these code snippits impromptu... so some of them may contain typos or minor flaws. I can tell by looking at the above code snippit that I wrote it on the spot... because it doesn't return a value... or modify any variables being passed into the function. It is just enough to illustrate the idea and help the developer move forward.

Andy Belton wrote:
Is this the norm for extended length support? Users are bound to come up super long path names.

I believe that you are referring to the Unicode version of the CreateFile Function[^]... you would need to prepend a L"\\?\" which escaped for c++ looks like L"\\\\?\\"

Andy Belton wrote:
Also, in my application I also access network drives. Does the "\\\\pc name\\drive name\\" give this extended length support?

Yes, you can access files over the network with a path greater than 260 characters however you will need to use the Unicode version of CreateFile function[^]

Best Wishes,
-David Delaune

Re: Translate Logical Drive to Physical Drive

Andy Belton4-Jun-12 4:34

Andy Belton

4-Jun-12 4:34

Hi David

Sorry to bug you again.

My application was finished and put out for field trials. Yup - it hit a couple of problems (well quite a few actually). Most were trivial to solve. However, I am stuck with two, both related (one directly the other indirectly) to my original question.

To help understand the setup, the application is XP platorm based and used primarily at the client office. Howeverm the application also needs to be used in the field (litteraly). So the client wanted the facility to copy work data files on to a second drive that could then be sent out to 'engineers' working in the field who could then interogate them on whatever they have there.

The reason for getting the Physocal drive info wsa to ensure that the files were not written to the same physical drive. After writing, the target drive is removed and sent out. (The drive can be internal or external). (That is about the limit as to what I can disclose for security reasons).

In my code, I used your solution to obtain the physical drive information. I compare the DriveNumber and PartionNumber numbers to enure they are different drives. This is fine. But I think that I should also be check which controller is being used as I could be blocking a drive that is actually on a different controller.

So, Question 1 - How do I determine the drive controller? I have spent some time searching both MSDN and CodeProject and have not found an obvious answer. I think what I need to find are the four parameters as used in boot.ini to select the boot operating system.

Now for the indirectly related problem. In practice, the client is using whatever hard drive comes to them from another source. Normally this drive is NTFS formated but some times it is FAT formated. I have no control over this and neither does the client. Out in the field I am using the file modified date from GetFileInformationEx(). This is because all files are loaded to be shipped out but, only those that have a later date to those exisiting in the field are used. However, we are getting problems with file dates.

It appears that if you copy a file from NTFS to a FAT file system the date can change. The FAT system does not store the milliseconds, instead the time is rounded up. I could deal with this if it were consistant but, I have seen a direct file copy between two drives and the times have been different by as much as five minutes! In one instance, I actually witnessed the file date being two minutes ahead of the current time! Any thoughts on this one? Please?

So, Question 2 - how can I ensure a consistant date record on a FAT drive? I do detect the drive file system and display this to the user.

Best regards
Andy Belton

Iostream processing\flags question

GuimaSun10-Aug-09 12:23

GuimaSun

10-Aug-09 12:23

I'm using the stringstream and the operator << receiving data from a input string, like this:

stringstream ss;
ss.clear();
ss.str("");
ss << inputString;
-------------
string outputString = ss.str();

The string is big and contains white spaces, etc.

Sometimes the "outputString" string reflects the entire inputString, sometimes it's truncated until it reaches a white space...in the same project.
Why it happens ? Is there any way\flag to reset any iostream data processing ?

Thanks for any help.

GuimaSun
www.nexsun.com.br
NEXSUN TechZone

Re: Iostream processing\flags question

Stuart Dootson10-Aug-09 21:10

Stuart Dootson

10-Aug-09 21:10

Can you give an example of a failing input string?
You don't need these lines - the stringstream will be empty on cosntruction:
```
ss.clear();
ss.str("");
```
Does using an ostringstream help (I doubt it)?

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: Iostream processing\flags question

GuimaSun11-Aug-09 2:55

GuimaSun

11-Aug-09 2:55

Problem solved using the .str() method, I finally could figure out a way to specialize my templates and use the unformated version with strings.
Anyway, thanks a lot for your valuable tips.

GuimaSun
www.nexsun.com.br
NEXSUN TechZone

Wait Until Event Occurs

staticv10-Aug-09 4:50

staticv

10-Aug-09 4:50

Hey, I'm doing sockets programming. Pretty much new to it.

The application is a Windows Service, in its ServiceMain() function I call CAsyncSocket's Listen() method, to listen for client connections. But after it starts listening for connections, it'll return and the ServiceMain() function will return and the service is stopped.

What I want to do with this is that, wait until a specific event occurs say WM_QUIT, till than listen for connections. How to do it?

// static member function (callback)
void CNTService::ServiceMain(DWORD dwArgc, LPTSTR* lpszArgv)
{
    // m_Server containts two sockets
    // one for listening and one for accepting connections

    m_Server.StartListening();  // calls Listen method on the listener socket

    // it will return and service will quit
    // which I don't want
}

I'm okay with mixing Win32 and MFC, so if it can be done in Win32 please do tell me too Smile | :)

Top Web Hosting Providers[^]

Do, or do not. There is no 'try'.

Re: Wait Until Event Occurs

Stuart Dootson10-Aug-09 8:32

Stuart Dootson

10-Aug-09 8:32

Ahmed Manzoor wrote:
What I want to do with this is that, wait until a specific event occurs say WM_QUIT

Does the service have a window (and associated window queue) on which to listen for window messages? Doubt it...

Instead, use a Win32 IPC event object[^] with a name specific to your service (hint: use an ASCII representation of a UUID to get a unique name) and wait on that with WaitForSingleObject[^].

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: Wait Until Event Occurs

staticv10-Aug-09 20:30

staticv

10-Aug-09 20:30

But, won't that block the thread and everything will stop!

Top Web Hosting Providers[^]

Do, or do not. There is no 'try'.

Re: Wait Until Event Occurs

Stuart Dootson10-Aug-09 21:01

Stuart Dootson

10-Aug-09 21:01

Quite true - I was thinking of the other sort of asynchronous IO that uses APCs (but that wouldn't work with WaitForSingleObject - it would need WaitForSingleObjectEx). OK. So, you need a window message pump to handle blocking for you...which is actually something that CSocket provides - whioch leads to the question - why not use CSocket instead of CAsyncSocket? I can't see any advantage to CAsyncSocket if you're only using one socket....

Anyway - to see how to block and process socket notifications, have a look at the CSocket message loop in CSocket::ProcessAuxQueue, which is in sockcore.cpp in your MFC source directory (that's C:\Program Files\Microsoft Visual Studio 9.0\VC\atlmfc\src\mfc for me).

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: Wait Until Event Occurs

staticv10-Aug-09 21:25

staticv

10-Aug-09 21:25

Okay, thanks I'll take a look at the source. Its not that I'm using only one socket Smile | :)

. I'll add support for more connections, but later. I only need blocking for listening and everything else asynchronous.

I guess, I'll have to kick-off some threads. Any good strategy for using blocking listening and non-blocking I/O, MULTITHREADEDly Big Grin | :-D

Top Web Hosting Providers[^]

Do, or do not. There is no 'try'.

SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Nitheesh George10-Aug-09 4:43

Nitheesh George

10-Aug-09 4:43

Hi,

I wanted to get the path of Recycle Bin in vista. But when i used
SHGetFolderPath with CSIDL_BITBUCKET , it returns E_FAIL.

how can i get the path of Recycle bin in Vista.

thanks

Nitheesh

Jose Jo Martin

http://www.simpletools.co.in

Re: SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Stuart Dootson10-Aug-09 8:27

Stuart Dootson

10-Aug-09 8:27

The Recycle Bin isn't a real folder - it's a virtual folder that aggregates the recycle bin folders from all drives that have them. Look at the documentation[^]:

CSIDL_BITBUCKET (FOLDERID_RecycleBinFolder)

The virtual folder that contains the objects in the user's Recycle Bin.

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Randor 10-Aug-09 9:44

Randor

10-Aug-09 9:44

While Stuart is correct that the Recycle Bin is considered a virtual folder... copies of the files and the INFO/INFO2 database are stored in multiple physical locations on mounted disk drive volumes.

Raymond Chen described a method for determining whether a folder is part of the recycle bin:

How can I tell that a directory is really a recycle bin?[^]

As far as I know..all folders with COM class identifier CLSID_RecycleBin have always been created in the root of the volume. So in theory you would need to enumerate all folders in the volume root directory and use Raymond's function to determine if they are part of the recycle bin.

Best Wishes,
-David Delaune

Re: SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Stuart Dootson10-Aug-09 10:29

Stuart Dootson

10-Aug-09 10:29

So...I guess the best response to the OP would have been 'why do you want to do that? Because if you tell us what you really want to do, we can probably give you a better answer...'.

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Randor 10-Aug-09 11:15

Randor

10-Aug-09 11:15

This seems to be a recurring theme here on codeproject.com where a majority of the questions are poorly formed. When I determine that the author of the post does not know enough about the subject to properly form a question I try to include educational links and a brief summary in my comments to avoid future questions and elongated threads.

Best Wishes,
-David Delaune

Re: SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Stuart Dootson10-Aug-09 11:23

Stuart Dootson

10-Aug-09 11:23

Randor wrote:
This seems to be a recurring theme here on codeproject.com

Not just on CP - at work, I'm often asking people 'and your real question is???'

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: SHGetFolderPath returns E_FAIL for CSIDL_BITBUCKET

Nitheesh George10-Aug-09 21:38

Nitheesh George

10-Aug-09 21:38

Hi David,

Sorry for not describing what i am actually want to do. Here is my problem.

I am doing a project in which i wanted to show the user the files in Recycle bin so that they can make sure that no necessary files are getting deleted in a mistake from the file system. And i am programmatically clearing the Recylcle bin using the API SHEmptyRecycleBin(). So when the user click on button with Caption "Open Recycle Bin" i need to show them with the files in it.

thanks

Nitheesh.

Jose Jo Martin

http://www.simpletools.co.in

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.