|
Well you came up with more than I did. I was hoping to get around manually editing the boot ini file with my code. Even if I did that would it go off once it booted into safe mode or will it continue to boot into safe mode every time it reboots?
Note:
I guess I could try opening reflector and finding this code and how they are doing it. Do you know if this is legal for me to do?
|
|
|
|
|
Jacob D Dixon wrote: Note:
I guess I could try opening reflector and finding this code and how they are doing it. Do you know if this is legal for me to do?
Probably not, if you use the code directly. Although if it's not obfuscated there is no harm in just having a look, to satisfy your curiosity.
I used to do a similar thing back in the DOS days with the Autoexec.bat and Config.sys for some programs (Games mostly) that required non standard settings.
In your situation, make a copy of Boot.ini, rename it Boot.ini.safe (safe mode), or similar. Make another copy and rename it Boot.ini.std (standard mode). Modify the .safe file to include the /SAFEBOOT stuff.
BTW: Try the next bit out manually first, to make sure that it works.
I used to do the next bit using batch files, you could do the same, or write a small app to do it.
1. Delete Boot.ini
2. Depending on whether you're going from standard to safe, or the other way, copy the Boot.ini.safe/Boot.ini.std file as Boot.ini.
4. When going to Safe mode add the entry to Runonce in the registry to run the app/batch that prepares for standard boot on next restart.
3. Restart.
[Edit]
Just discovered that step 4, above won't work See Notes section in this[^].
Hmmm and it seemed like such a good idea. 
[/Edit]
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
LOL.
Let me give some things a try. Your suggestions got me further than I was. There are some things that I want to know how this application does stuff. It also provides like a VNC redirecting type function where the control center application is on your computer, then you have the server, then you have agents (which could be on a different network behind a different firewall). So the agent started the VNC with the server, then somehow the server redirects all that traffic to the control center.
It is all a learning curb for me. So my way of learning is trying to duplicate the server / client application they made (slimmed down version of course).
Let me try some things and also snoop around in their code and I'll let you know what info I come up with. thanks for the information you already provided!
|
|
|
|
|
thanks to both of you.. now I know how to do routine at least it works.. I usually restart to Safe/DOS mode to remove manually the Autorun.inf of any USB Drive suspected with virus. this at least I can prevent it from transferring to my hard drive. I just copy only the Docs and Xls files.
|
|
|
|
|
I am trying to change the "onload" event of the Body in a frame. My problem is when I using the GetAttribute method on the Body it returns "System._ComObject" as a string rather than the attributes value. Please note it is not returning an object of System._ComObject, just the string.
I tried just doing the change via Body.OuterHtml but that throws an expception of NotSupportedException. Which is odd seeing as it is a property that says it allows "get and set" operations.
WebBrowser.Document.Window.Frames[i].Document.Body.GetAttribute("onload") = "System.__ComObject"
Any ideas on how to get this to behave as it should would be greatly appreciated. Even just a point in maybe the right direction. Also I did try this using "mshtml" objects and all it got me was the actual System._ComObject. However, I had no idea how to covert that to the string it was supposed to actually represent.
|
|
|
|
|
From a (very) quick google it seems that that is the expected behaviour.
Some of the hits I got suggest using
WebBrowser.Document.Window.Frames[i].Document.Body.GetAttribute("onload").Name
WebBrowser.Document.Window.Frames[i].Document.Body.GetAttribute("onload").GetInterfaces()
Although it seems that does not always work.
In case you want to dig deeper I used c# system.__comobject as my search term. Nearly all the first page were about people having similar problems as yourself.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Thanks when I googled I must have been using the wrong search terms. I found a work around I just regexed the onload out of the body tag, then set the onload attribute the way I wanted it. Not the solution I wanted, but hey it works for what I needed.
But doing it the right way will be more important when I start doing form fills on that page. I just wanted to keep this stupid popup alert that is in the body's onload event from activating.
|
|
|
|
|
Hello,
When I'm running in debug in a window console application (C#) I've noticed that I can't use thing like "windows key + E" to open the explorer windows and so on.
If for example I'm pressing twice on WIN+E - nothing happen.
Now - I can use the F10 key to continue the debug and stuff but only after I'm pressing the STOP icon and the debug is stopped. only then All the other key press are jumping in
Any body know this issue?
Thanks.
|
|
|
|
|
Maybe Visual Studio is swallowing your special key combinations?
You could try to disable the "Visual Studio hosting process" (see project properties, debug).
|
|
|
|
|
Luc, Can I marry you?
Thanks, Looks like it worked.
|
|
|
|
|
I am logging data from a USB device (pooling the device) using a timer component with C#.
Every 250ms (timer tick) I read the data from the device and save it to a CSV (coma separated value) file.
I just thought I should ask if there is anyway to improve on the saving of the file. I am new to C#/.net so would really like a review of the idea.
1. Every timer tick I read two values from an object (the USB device interface).
2. Open the file by creating a Steame writer object;
StreamWrite out = new StreamWriter(filename, true).
3.Write the values to the file
out.Writeline("{0},{1}",value1,value2);
4.Close the file.
out.close();
The main question is should I keep opening and closing the file every tick or should I open it when the logging starts and close it when the user stops the logging of the data? The reason I close the file is so if the application fails I do not lose any data.( the file is being used only by this application).
Any comments to improve the code will be useful.
Thanks cages
|
|
|
|
|
Can't compute. What kind of data is it? How does it evolve over time? Why are you doing this?
|
|
|
|
|
The data are double values that represent temperature(the usb device is a teperature logger).
The data will be logged for about 3 hours.
|
|
|
|
|
OK. If getting maximum probability of getting all the data is paramount (say your USB is used while debugging a system that eventually crashes), then yes keep the file closed as much as possible. I do this while logging any application during its development, and that takes hundreds of text lines per second! (Of course your USB access might slow down things a bit, depending on the device).
The easiest and cheapest way probably is by calculating a single string (including the NewLine terminators) first (string.Format() may be useful here), then calling File.AppendAllText().
|
|
|
|
|
Ummm... how much can the temperature change during so short a time period?
First; yes, open and close each time you write to the log.
But, you shouldn't keep writing needless repetitive data. My first professional programming job involved polling some equipment for temperature and such and then passing it to a specialized database system. The database didn't simply store everything my software sent; it tested the incoming data and made a determination as to whether or not it was significant. Each datum could be configured as to what was significant -- for instance if a temperature changed by a one-hundredth of a degree; or if a value hadn't been stored for some period of time (perhaps ten minutes). This greatly reduced the amount of data stored and sped up reporting without losing significant detail.
I strongly suggest you implement a similar technique.
|
|
|
|
|
Option 3. Use a logging framework such as log4net where somebody else has taken care of the development and testing of this for you.
|
|
|
|
|
I have an application in C# made by me, is something like a database with clients for a hotel, and every client has a report, with informations stored in an mysql database. I want to print that report on printer, and I don't know exacly how. I need something like a template and only some fileds to be completed with the informations. I'm working with mysql and VS 2010
|
|
|
|
|
This[^] article is a fairly comprehensive run through of printing from C#. If you work through it, you will get the idea.
As far as reports are concerned you could use Crystal Reports, if it came with your version of Visual Studio. There is also the ReportViewer control although, without checking, I do not know if it works with MySql.
Alternatively you could try using something like "Report Definition Language", as described in this[^] article from The Code Project.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
|
Hi all,
This is not so much a technical question but rather to get the opinion of others with regards to a solution I require.
For the sake of simplicity, lets say I have a database table will a list of scheduled emails - this table contains a schedule date/time and the content of the email to send. These scheduled emails can be created, modified and delete at any time.
My initial thoughts on achieving this is to create a Windows Service (I think this is better than a IIS hosted WCF Service because of the need for timers - maybe I am wrong?). This service will then query the DB table at regular intervals and send any emails that need sending.
But how best to handle the timing? I want the scheduled emails to be sent as close to the correct scheduled time as possible but at the same time I want to limit the querying of the DB (i.e. not every second)
I also thought about notifying the service when a new task is scheduled and then setting a timer up there and then based on the difference between current time and scheduled time. This however may lose precision. Also, what if a scheduled email is modified/deleted? Also, doesn't seem best for schedules of a long time (e.g. a day, a week or a month even)
Any opinions are welcome
Thanks
Life goes very fast. Tomorrow, today is already yesterday.
|
|
|
|
|
I wrote an article about scheduling: I have used the code a few times in windows services. As far as reducing queries on the database, you can schedule that too.
Scheduling Future Dates [^]
.45 ACP - because shooting twice is just silly
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"The staggering layers of obscenity in your statement make it a work of art on so many levels." - J. Jystad, 2001
|
|
|
|
|
Thanks for your reply and an interesting idea. Which I guess in your suggestion would be to sleep a synchronous thread until the task is due to run.
I guess my issue here would be when tasks are changed or cancelled. I suppose I could check the task is still valid at the same time you are comparing the dates. But then if I need to re-query the DB I may as well do so at regular intervals. I am not sure I like the idea of sleeping a thread for a week especially one that will be dynamically created.
I have been thinking that scheduled intervals will be limited to every 15 mins (e.g. 12.00, 12:15, 12:30 etc.) - So I could get away with querying the DB every 15 mins (or just short of and sleeping) - that way I can make sure I don't miss new tasks and updated tasks and I don't even need to notify the service when a tasks is added/changed
Life goes very fast. Tomorrow, today is already yesterday.
|
|
|
|
|
If the schedule changes, you can destroy the current timer thread, and start a new one, or design your threads in such a way as to be able to compensate for said changes. It's a simple matter of implementation.
.45 ACP - because shooting twice is just silly
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"The staggering layers of obscenity in your statement make it a work of art on so many levels." - J. Jystad, 2001
|
|
|
|
|
But then I have the extra effort of needing to track all timers and the application creating the the tasks would need to notify the service of changes. I just don't think it needs to get so complicated for what is really quite a simple concept.
I do like your suggestion in terms of maintaining precision, I just don't think its right for my needs. Effectively what I would end up doing is creating an in-memory copy of the database table (or at least a cut down version of) in order to identify timers - thou I guess I would only need the ID column values linked to the timers.
Life goes very fast. Tomorrow, today is already yesterday.
|
|
|
|
|
if you get the mails-to-be-sent from the database sorted by datetime ascending, your app (Win Service) can send the ones it considers "immediate", then delay itself till the time arrives that corresponds to the first one that hasn't been sent yet. The only caveat is there could be new requests added while your service is asleep.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
