|
0) Really Complex way : use hardware dongles to control access. e.g. Aladdin HASP or DesKey etc.
1) Complex way : You could implement a key validation mechanism via the internet. Issue the key to the user, and then when you don't want to them to use it anymore, invalidate the key. Also, limit the activation count against the key to restrict further distribution.
2) Medium way : publish to a location that they only know, and require username and passowrd to access, wouldn't prevent further distribution once they have it.
3) simple way : work on trust and / or NDA agreements in place
4) really simple way, just give them the software and tell them not to share / is it really worth that much to go to all the hassle of #0, #1, #2 or #3
|
|
|
|
|
Thanks a lot for the reply.
Will try to use any one of the above mentioned ways.
|
|
|
|
|
Hello,
I am working on timeout web security function for my project.
I am using a web message box to display messages in web when the time elapsed.
The System.Timers.Timer function can work well at web, except the part where it calls the WebMsgBox from event.
Full coding as below :
<br />
Partial Class _Default<br />
Inherits System.Web.UI.Page<br />
Public aTimer_A As New System.Timers.Timer()<br />
<br />
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load<br />
AddHandler aTimer_A.Elapsed, AddressOf OnTimedEvent<br />
aTimer_A.Interval = 5000<br />
aTimer_A.Enabled = True<br />
WebMsgBox("Page loaded - can come out")<br />
End Sub<br />
<br />
Public Sub OnTimedEvent(ByVal source As Object, ByVal e As Timers.ElapsedEventArgs)<br />
WebMsgBox("OnTimedEvent - does not come out")<br />
End Sub<br />
<br />
Public Sub WebMsgBox(ByVal sMsg As String)<br />
Try<br />
Dim sb As New StringBuilder()<br />
Dim oFormObject As System.Web.UI.Control<br />
<br />
sMsg = sMsg.Replace("'", "\'")<br />
sMsg = sMsg.Replace(Chr(34), "\" & Chr(34))<br />
sMsg = sMsg.Replace(vbCrLf, "\n")<br />
sMsg = "<script language=javascript>alert(""" & sMsg & """)</script>"<br />
sb = New StringBuilder()<br />
sb.Append(sMsg)<br />
<br />
For Each oFormObject In Me.Controls<br />
If TypeOf oFormObject Is HtmlForm Then<br />
Exit For<br />
End If<br />
Next<br />
<br />
oFormObject.Controls.AddAt(oFormObject.Controls.Count, New LiteralControl(sb.ToString()))<br />
Catch ex As Exception<br />
<br />
End Try<br />
End Sub<br />
End Class<br />
<br />
Please advise. Your guidance on solving this problem is very much appreciated.
Thanks,
Goutam
|
|
|
|
|
If understand what you want to do, it appears as though you're trying to get a messagebox to pop up on the users browser using a timer event on the server. This cannot work because the server cannot initiate a connection to the client. The message box won't show up until the browser refreshes the page and even then, with your design, I'm not sure that's going to happen even then.
|
|
|
|
|
Thank you. Your explanation clarified a lot of things.
Now, I am trying to solve the problem at client side itself, with javascript, using below sample codes:
http://stackoverflow.com/questions/572938/force-logout-users-if-users-are-inactive-for-a-certain-period-of-time
|
|
|
|
|
hi i wish to check if the format i use for checkbox is it correct?
<pre lang = 'vb'>Imports System.Speech.Synthesis
Public Class Form1
Dim FromSerialPort1 As String
Dim XX(100) As Integer
Dim YY(100) As Integer
Dim ZZ(100) As Integer
Dim Flag As Integer
Dim Speaker_Flag As Integer = 0
Dim FromSerialPort_Temp
Dim Thermistor_Temp(15) As Integer
Dim Thermistor_R(15) As Integer
Dim Circuit_Thermistor_R As Double
Dim Result
Dim Counter As Integer
Dim Temperature_low
Dim Temperature_high
Dim Resistance_low
Dim Resistance_high
Dim Rnum1
Dim Rnum2
Dim Speaker As New SpeechSynthesizer
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
TimerSpeak2.Enabled = True
TimerTemp.Enabled = True
Private Sub ReadSerialPortForTemp()
FromSerialPort_Temp = SerialPortTemp.ReadExisting
If Len(FromSerialPort_Temp) <> 0 Then
TextBoxVoltage.Text = 0.01 * Convert.ToInt16(FromSerialPort_Temp.SubString(2, 3), 16)
Else
FromSerialPort_Temp = "U1000"
End If
End Sub
Private Sub OpenPort1()
If SerialPortTemp.IsOpen Then
SerialPortTemp.Close()
End If
SerialPortTemp.PortName = "Com4"
SerialPortTemp.BaudRate = 9600
SerialPortTemp.Parity = System.IO.Ports.Parity.None
SerialPortTemp.DataBits = 8
SerialPortTemp.StopBits = System.IO.Ports.StopBits.One
SerialPortTemp.RtsEnable = True
SerialPortTemp.Open()
End Sub
Private Sub ThermistorTable()
Thermistor_Temp(0) = -10
Thermistor_R(0) = 42506
Thermistor_Temp(1) = -5
Thermistor_R(1) = 33892
Thermistor_Temp(2) = 0
Thermistor_R(2) = 27219
Thermistor_Temp(3) = 5
Thermistor_R(3) = 22021
Thermistor_Temp(4) = 10
Thermistor_R(4) = 17926
Thermistor_Temp(5) = 15
Thermistor_R(5) = 14674
Thermistor_Temp(6) = 20
Thermistor_R(6) = 12081
Thermistor_Temp(7) = 25
Thermistor_R(7) = 10000
Thermistor_Temp(8) = 30
Thermistor_R(8) = 8315
Thermistor_Temp(9) = 35
Thermistor_R(9) = 6948
Thermistor_Temp(10) = 40
Thermistor_R(10) = 5834
Thermistor_Temp(11) = 45
Thermistor_R(11) = 4917
Thermistor_Temp(12) = 50
Thermistor_R(12) = 4161
Thermistor_Temp(13) = 55
Thermistor_R(13) = 3535
Thermistor_Temp(14) = 60
Thermistor_R(14) = 3014
Thermistor_Temp(15) = 1000
Thermistor_R(15) = 1
For Counter = 0 To 15
If CInt(TextBoxResistance.Text) >= Thermistor_R(Counter) Then
If Counter <> 0 And Counter <> 15 Then
Temperature_high = Thermistor_Temp(Counter)
Temperature_low = Thermistor_Temp(Counter - 1)
Resistance_low = Thermistor_R(Counter)
Resistance_high = Thermistor_R(Counter - 1)
Rnum1 = Resistance_high - TextBoxResistance.Text
Rnum2 = Resistance_high - Resistance_low
Result = 2.5 + Math.Round(Temperature_low + (5 * Rnum1 / Rnum2), 1)
TextBoxTemp.Text = Result & "C"
Exit For
If Counter = 0 Or Counter = 15 Then
TextBoxTemp.Text = "Out Of Range"
Exit For
End If
End If
End If
Next
End Sub
Private Sub TimerTemp_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TimerTemp.Tick
Call OpenPort1()
TextBoxVoltage.Clear()
TextBoxResistance.Clear()
TextBoxTemp.Clear()
SerialPortTemp.WriteLine("U1" + vbCr)
System.Threading.Thread.Sleep(150)
Call ReadSerialPortForTemp()
If Len(TextBoxVoltage.Text) = 0 Then
Else
Circuit_Thermistor_R = 10000 * TextBoxVoltage.Text / (5 - TextBoxVoltage.Text)
TextBoxResistance.Text = Math.Round(Circuit_Thermistor_R, 0)
Call ThermistorTable()
End If
End Sub
Private Sub TimerSpeak2_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TimerSpeak2.Tick
Call ThermistorTable()
If CheckBox1.Checked = True Then //from this part
Call ThermistorTable()
If Result >= 0 Then
TextBox.Text = ""
TextBox.Text = "Your Temperature is" + "" + TextBoxTemp.Text
TextBox.Refresh()
Speaker.Speak(TextBox.Text)
End If //to this part
</pre>
|
|
|
|
|
Just a glance and I can see there are a lot of things to improve here. Anyhow, I can see you have tried and worked on it, and that is much more than what we are used to see. Edit your question and repair the <pre> tag. Then I will tell you what you should improve.
|
|
|
|
|
Imports System.Speech.Synthesis
Public Class Form1
Dim FromSerialPort1 As String
Dim XX(100) As Integer
Dim YY(100) As Integer
Dim ZZ(100) As Integer
Dim Flag As Integer
Dim Speaker_Flag As Integer = 0
Dim FromSerialPort_Temp
Dim Thermistor_Temp(15) As Integer
Dim Thermistor_R(15) As Integer
Dim Circuit_Thermistor_R As Double
Dim Result
Dim Counter As Integer
Dim Temperature_low
Dim Temperature_high
Dim Resistance_low
Dim Resistance_high
Dim Rnum1
Dim Rnum2
Dim Speaker As New SpeechSynthesizer
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
TimerSpeak2.Enabled = True
TimerTemp.Enabled = True
Private Sub ReadSerialPortForTemp()
FromSerialPort_Temp = SerialPortTemp.ReadExisting
If Len(FromSerialPort_Temp) <> 0 Then
TextBoxVoltage.Text = 0.01 * Convert.ToInt16(FromSerialPort_Temp.SubString(2, 3), 16)
Else
FromSerialPort_Temp = "U1000"
End If
End Sub
Private Sub OpenPort1()
If SerialPortTemp.IsOpen Then
SerialPortTemp.Close()
End If
SerialPortTemp.PortName = "Com4"
SerialPortTemp.BaudRate = 9600
SerialPortTemp.Parity = System.IO.Ports.Parity.None
SerialPortTemp.DataBits = 8
SerialPortTemp.StopBits = System.IO.Ports.StopBits.One
SerialPortTemp.RtsEnable = True
SerialPortTemp.Open()
End Sub
Private Sub ThermistorTable()
Thermistor_Temp(0) = -10
Thermistor_R(0) = 42506
Thermistor_Temp(1) = -5
Thermistor_R(1) = 33892
Thermistor_Temp(2) = 0
Thermistor_R(2) = 27219
Thermistor_Temp(3) = 5
Thermistor_R(3) = 22021
Thermistor_Temp(4) = 10
Thermistor_R(4) = 17926
Thermistor_Temp(5) = 15
Thermistor_R(5) = 14674
Thermistor_Temp(6) = 20
Thermistor_R(6) = 12081
Thermistor_Temp(7) = 25
Thermistor_R(7) = 10000
Thermistor_Temp(8) = 30
Thermistor_R(8) = 8315
Thermistor_Temp(9) = 35
Thermistor_R(9) = 6948
Thermistor_Temp(10) = 40
Thermistor_R(10) = 5834
Thermistor_Temp(11) = 45
Thermistor_R(11) = 4917
Thermistor_Temp(12) = 50
Thermistor_R(12) = 4161
Thermistor_Temp(13) = 55
Thermistor_R(13) = 3535
Thermistor_Temp(14) = 60
Thermistor_R(14) = 3014
Thermistor_Temp(15) = 1000
Thermistor_R(15) = 1
For Counter = 0 To 15
If CInt(TextBoxResistance.Text) >= Thermistor_R(Counter) Then
If Counter <> 0 And Counter <> 15 Then
Temperature_high = Thermistor_Temp(Counter)
Temperature_low = Thermistor_Temp(Counter - 1)
Resistance_low = Thermistor_R(Counter)
Resistance_high = Thermistor_R(Counter - 1)
Rnum1 = Resistance_high - TextBoxResistance.Text
Rnum2 = Resistance_high - Resistance_low
Result = 2.5 + Math.Round(Temperature_low + (5 * Rnum1 / Rnum2), 1)
TextBoxTemp.Text = Result & "C"
Exit For
If Counter = 0 Or Counter = 15 Then
TextBoxTemp.Text = "Out Of Range"
Exit For
End If
End If
End If
Next
End Sub
Private Sub TimerTemp_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TimerTemp.Tick
Call OpenPort1()
TextBoxVoltage.Clear()
TextBoxResistance.Clear()
TextBoxTemp.Clear()
SerialPortTemp.WriteLine("U1" + vbCr)
System.Threading.Thread.Sleep(150)
Call ReadSerialPortForTemp()
If Len(TextBoxVoltage.Text) = 0 Then
Else
Circuit_Thermistor_R = 10000 * TextBoxVoltage.Text / (5 - TextBoxVoltage.Text)
TextBoxResistance.Text = Math.Round(Circuit_Thermistor_R, 0)
Call ThermistorTable()
End If
End Sub
Private Sub TimerSpeak2_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TimerSpeak2.Tick
Call ThermistorTable()
If CheckBox1.Checked = True Then //from this part
Call ThermistorTable()
If Result >= 0 Then
TextBox.Text = ""
TextBox.Text = "Your Temperature is" + "" + TextBoxTemp.Text
TextBox.Refresh()
Speaker.Speak(TextBox.Text)
End If //to this part
|
|
|
|
|
Though I do not usually do this, I have spent five minutes to parse your code snippet correctly. What I can see is that Thermistor_Temp and Thermistor_R arrays have always the same values, so you should better initialize them just once in the constructor, becouse you are now initializing them with the same values every time you call ThermistorTable.
In this loop in ThermistorTable method:
For Counter = 0 To 15
If CInt(TextBoxResistance.Text) >= Thermistor_R(Counter) Then
If Counter <> 0 And Counter <> 15 Then
Temperature_high = Thermistor_Temp(Counter)
Temperature_low = Thermistor_Temp(Counter - 1)
Resistance_low = Thermistor_R(Counter)
Resistance_high = Thermistor_R(Counter - 1)
Rnum1 = Resistance_high - TextBoxResistance.Text
Rnum2 = Resistance_high - Resistance_low
Result = 2.5 + Math.Round(Temperature_low + (5 * Rnum1 / Rnum2), 1)
TextBoxTemp.Text = Result & "C"
Exit For
If Counter = 0 Or Counter = 15 Then
TextBoxTemp.Text = "Out Of Range"
Exit For
End If
End If
End If
Next
I guess you are looking for the first value on your array which is lesser or equal to what you have in TextBoxResistance. Not too bad, but somewhat confusing, and the last if will never run. I would have done it this way:
Dim r As Integer = CInt(TextBoxResistance.Text)
Dim idx As Integer = 0
While r < Thermistor_R(idx) And idx < 15
idx += 1
End While
If (idx = 0 Or idx = 15) Then
TextBoxTemp.Text = "Out Of Range"
Else
Temperature_high = Thermistor_Temp(idx)
Temperature_low = Thermistor_Temp(idx - 1)
Resistance_low = Thermistor_R(idx)
Resistance_high = Thermistor_R(idx - 1)
Rnum1 = Resistance_high - r
Rnum2 = Resistance_high - Resistance_low
Result = 2.5 + Math.Round(Temperature_low + (5 * Rnum1 / Rnum2), 1)
TextBoxTemp.Text = Result & "C"
End If
Anyhow, you get an error trying to convert a string to an Integer. It must be becouse you try to convert a TextBox.Text property before you have initialized its value, so it has nothing to do with your CheckBox. Like you are using different timers to read and modify the values, I think you have not synchronized them correctly.
On the other hand, this is too much UI dependent. I would rather encapsulate all this stuff within a class and use just one timer to update the UI controls with the values this class returns.
|
|
|
|
|
Thanks It work already Cheer to programmer
|
|
|
|
|
hi,
i have written a code,my current code captures real time temperature,it adds the captured temperature to the database.But the problem is the code keeps running infinite.I want it to start from 0(database slot) and stop at 288 (database slot)and to keep running in a loop.How do i do it.Please advice.
Private Sub Timer2_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer2.Tick
Dim cBuilder As New OleDb.OleDbCommandBuilder(dAdapter)
Dim dsNewRow As DataRow
dsNewRow = dSet.Tables("test1").NewRow()
dsNewRow.Item("Temperature") = TextBox8.Text
dSet.Tables("test1").Rows.Add(dsNewRow)
dAdapter.Update(dSet, "test1")
dSet.Clear()
dAdapter.Fill(dSet, "test1")
End Sub
|
|
|
|
|
so count the number of times your code snippet is running and make the timer stop when you had enough.
|
|
|
|
|
i understand by putting a timer, it will stop it from sending temperature data to the database.. but i also need it to send data up to 288 and overwrite the data from 0-288 again
|
|
|
|
|
'Dim xmlfile As Stream = My.Resources.ResourceManager.GetStream("xxxx.xml")
Dim reader As New StringReader(My.Resources.ResourceManager.GetString("xxxx.xml"))
'fills datagridview with xml information'
Dim xdoc As XmlDocument = New XmlDocument
xdoc.Load(reader.ReadToEnd())
I need some help finding a solution to the code above. I'm using an embedded resource xml file. It comes up as null every time. Are there any suggestions on what to do in this situation or should I take another route.
modified on Wednesday, November 10, 2010 8:13 PM
|
|
|
|
|
Have you read the documentation? See the parameters description here[^]. It says: "URL for the file containing the XML document to load." You are passing it the content of the file to load.
|
|
|
|
|
I have been reading but it there a way to add onto an embedded resource?
|
|
|
|
|
Not a supported one, no. Resources are read-only.
Why? Because your .EXE is locked by the system while it's running.
|
|
|
|
|
As Dave has told you, I think an embedded resource cannot be modified at runtime. However, depending on what your requirements are, Application settings[^] might be enough.
|
|
|
|
|
Its just that I'm trying to secure this file and encrypting the xml is fine but when decrypting its been one big head ache. I'm trying to secure this file but the application needs to be able to read the contents of the file.
|
|
|
|
|
So, what I understand is that you have the encrypted file as a resource on your application, don't you? Then use a CryptoStream to read it.
|
|
|
|
|
Need some advice!
In the beginnings of a new project and have to look at system security
Phase I is a hot desk based windows application
Phase II is an extranet solution to extend to remote offices
unsure of how to work this to the best advantage of dot net. Does anyone know of any good reading material or solutions that I should read upon?
Many thanks
Simon
As barmey as a sack of badgers
Dude, if I knew what I was doing in life, I'd be rich, retired, dating a supermodel and laughing at the rest of you from the sidelines.
|
|
|
|
|
I think a multitier architecture might be a good approach.
|
|
|
|
|
Im currently developing these in a multi tier methodology but
1. the desktop application has to be "hot desk" enabled
2. and a extranet
but at present both areas are seperate, but the manager would like to have the security aspect a single unit that serves both applications
Thanks
Simon
As barmey as a sack of badgers
Dude, if I knew what I was doing in life, I'd be rich, retired, dating a supermodel and laughing at the rest of you from the sidelines.
modified on Wednesday, November 10, 2010 5:15 PM
|
|
|
|
|
How to answer this question depends entirely on what you're trying to secure, which you haven't said anything about.
Are you taking about CD-KEY type security? Communication channels? Remoting? Database security? Storing passwords? Credit card info? ..., ..., ..., ...
|
|
|
|
|
Thanks for your reply Dave.
What I am trying to achieve is that in the desktop side of the application users need to login to the apication for use and their appropriate security levels to be given. Phase I is supposed to be built around a hot desk environment potential one user could sit at a different desk per day.
In phase II they want to introduce an extranet for the remote offices. Again when they log into the application, their security levels / restrictions are set
My boss would like to have an approach where only one set of logon information is stored regardless if they log in one day via the extranet on a client site and another day via the windows desktop application another.
Is this possible and what should I read up on? To achieve his vision?
As barmey as a sack of badgers
Dude, if I knew what I was doing in life, I'd be rich, retired, dating a supermodel and laughing at the rest of you from the sidelines.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
