|
Typically you don't do this by just connecting the interfaces to your PC. You need a router that allows load balancing and\or connection aggregation. you could probably set up a Windows server with several NICs in it to do this (never looked into it before) but my guess is that your simplest solution would be just a hardware box to do it.
I have dual Inet connections at home but I only use it for traffic segmentation not aggregation (ie: I have 2 gateways on my network and depending on the one you are set to use dictates where your outbound traffic goes) just so that my and my kids heavy use does not bug the rest of the family.
|
|
|
|
|
Short answer: no
Long Answer: Yes, but....
The problem is your default gateway configuration: this is the router that is at your ISP location, and basically takes all the traffic that is not on your home network (typically 192.168.0.0/24 if your pc is connected directly to your ISP). When you install two internet connections, the PC suddenly sees two default gateways. I know windows server will deal with the problem (though it will warn you that you are multi-homing, and I think it will just use the second NIC as backup, in case the primary gateway fails), but I don't know how client OS's will deal the problem.
A possible solution is to configure one network card manually, omitting the default gateway. You should then adapt your routing table so that some of the network traffic is routed through the manually configured NIC.
Note that this will not increase your session speed, it will just divide sessions over 2 connections, so that you can for examples do 2 downloads
at once (as long as they go through separate NICs).
Yeah, but my company has multiple redundant connections to the Internet.
Yes they do, but this requires an agreement with all the internet providers, the use of a public address space, an Autonomous System Number and the use of Border Gateway Protocol, which is available on professional routers ( and takes a PhD to configure, if you don't want the whole country's network traffic suddenly passing through your home. I speak from experience  )
On solution 1: you could still buy a Dual WAN router, they cost about as much a PC, and do all this stuff automatically. Trying not to do product placement, but have a Google for SYSWAN and XINCOM.
|
|
|
|
|
while i am trying for software router that is not getting working perfectly, and i tried a trail version of multiconnect software, which is not availble now so i am searching for a best method to connect more than two or more internet connections with only software router, and i am using two dialup connections of same isp, one is from usb-modem, and another is from mobile,
i also tried wingate for this it is not working, so if any solution is there for this plz help me
|
|
|
|
|
i need to contact one of the members for help a specific member, like email or a message, does codeproject allow this? if yes can you please tell me how, thank you
|
|
|
|
|
Find a post from that member and clic on it. There may be an email link at the bottom of that post. If there is one, youcan use that to send that person an email. If there is no email link, that person has turned the option off and you don't have any recourse for contacting that person.
|
|
|
|
|
Hi all,
I am working on a feature where in we can allow/disallow changing system time to any user. We can run this application from an administrator's account and set if a particular user can change system time or not. Even the administrator (who itself is logged on) itself can allow/disallow himself changing time.
While googling I found that there is some, The system user right SeSystemtimePrivilege that controls the ability to set the system time. I could not find how to complete my feature via the privilege SeSystemtimePrivilege using C#.
Can somebody help me how to that using c# (or even C++). Even if there is some other way of implementing this feature, please let me know.
Thanks in Advance
Best Regards
Aseem
|
|
|
|
|
You should call the Local Security Authority functions to assign privileges to a user (I don't think there is a .net interface, so you're stuck with C++)
http://msdn.microsoft.com/en-us/library/ms721863(v=VS.85).aspx[^]
the user calling this function must of course be part of the administrators group.
Note that if the computer is in a domain, these privileges will probably be reset periodically (overwritten by the domain security policy, talk to your admin). Also if the computer is in a domain, changing the system time might impair the user's access to resources (the Kerberos security tokens have limited time validity, and must be renewed. Kerberos relies on all machines being synchronized to check the token validity).
|
|
|
|
|
Oh, and BTW, there's a gui to this stuff:
just run run secpol.msc on the box where you want to assign the privilege. The "change system time" privilege is under
Local Policies
--UserRights Assignments
----Change the system time
Same restrictions apply: in a domain this will get overwritten by the domain security policy. Talk to your admin if you want to change this on the domain level.
|
|
|
|
|
Hi All,
I have a user that has forgot there Mailbox password. We are running Exchange Server 2007 on a MS Windows 2008 server and our DC is also running MS Windows 2008.
Please let me know how I can reset the users password. I can't see how to do it via the Exchange Management Console, is there a way? Maybe a command I can run in the Exhcnage Management Shell?
Thanks,
Mel
|
|
|
|
|
I'm assuming the user was set up in exchange and active directory. Usually the mailbox password is the same as the user's windows logon. Hince, if the computer he is using is on the domain and the network, he should be able to get his email, unless for some reason he is locked out in active directory. If he's off the domain and trying to access it through outlook anywhere or OWA it should still be his user and pass for logging onto windows.
Zach
|
|
|
|
|
There is no way of running Exchange 2007 outside of a domain (Exchange gets it's users from the active directory). Just ask the Domain admin(s) to reset the account password.
|
|
|
|
|
Thanks for your reply guys.
I simply got the user to close Outlook and reopen it again and the user was automatically logged back in. He had previously requested for Outlook to remember his password.
When I get some spare time though I'm going to test the resetting of the password like you explained, incase this happens again and an open and close of Outlook doesn't work.
Thanks again
Mel
|
|
|
|
|
Hi all,
I would like to monitor AD-lookup requests coming from member servers in the domain.
We have a windows 2008 DC and a windows 2003 server. The Win2k3 server is running an ASP.net application.
From time-to time, this application server queries the AD for user information.
I am interested in monitoring what requests are coming into the DC.
to be more specific, I am looking for something like SQLServer profiler tool.
Can this information be written to event log on the server? are there any options that I can configure to enable logging on the server?
Thanks in advance for your help.
Cheers,
Kalyan
|
|
|
|
|
A previous client of mine who's setup I did suffered some sort of virus issue.
Long story short, many of the more System32 variety files are now in quarantine. We're talking in excess of 40,000 files. Restoring these files to said locations should be a simple issue, but in many cases, trying to right click restore said file opens up a browser window and asks to specify the location to return them. The obvious response is how the hell should I know?!
My initial response to the IT guy there is that they should try and restore but the intelligent so and so needed the external HDDs (yes, 2 of them) for something so there are no restore points. Fantastiche.
Googling about, it seems that you cannot do so directly like with older versions of Windows.
Ideas? Suggestions?
The nuclear solution of starting clean is not really preferred.
If the post was helpful, please vote, eh!
Current activities:
Book: Devils by Fyodor Dostoyevsky
Project: Hospital Automation, final stage
Learning: Image analysis, LINQ
Now and forever, defiant to the end.
What is Multiple Sclerosis[ ^]?
|
|
|
|
|
Maybe the anti-virus supplier has way. Talk to them...
Otherwise you're stuck 
|
|
|
|
|
Hey guys,
If we restart the server in the night, there is nobody to login. Connect to the database is no problem. But we have to start several jobs on the server.
is there a property to start SQL jobs from a server without login? 
|
|
|
|
|
Have you tried the "Task Scheduler". You find it under Accessories/System Tools.
If you prefer the CLI, you can try the AT command.
"When did ignorance become a point of view" - Dilbert
|
|
|
|
|
Yes sure, but they wouldn't start or rather, they wouldn't be used cause the jobs run on the SQL Server...
modified on Wednesday, March 24, 2010 6:10 AM
|
|
|
|
|
How about this[^] then?
"When did ignorance become a point of view" - Dilbert
|
|
|
|
|
Yes sure, we already use this 
If no user logged in the jobs wouldn't start...
Think so... start your pc and you would not login, but updates run in the background.
We have SQL jobs, which run at 7:00 AM but the server was restartet at 6:00 AM an nobody is there to login to the server with the adminuser.
Connect to the servers database already works. 
|
|
|
|
|
If the Scheduled Jobs are setup properly, using an account that the job knows about (username/password), noone has to login to the machine at all. The Agent service will run the job as the user that's supplied. No interactive login required on your part.
|
|
|
|
|
Scheduled Jobs from the Server or SQL?
the server jobs already use this...
|
|
|
|
|
SQL Server has it's own scheduled tasks ability.
|
|
|
|
|
 yes I know... WE ALREADY USE IT!!!
but where can we set the login property there?
the >>SQL JOBS<< wouldn't run without a logged in user.
|
|
|
|
|
Go to "Administrative Tools / Services"
Rightclick "SQL Server Agent" and select Properties.
In the "General" tab, make sure the startup type is "Automatic".
In the "Log On" tab you put in the correct credentials for a user with the correct permissions.
"When did ignorance become a point of view" - Dilbert
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
