|
I worked on a system that had some quite strict auditing requirements and the way we managed it was to lock down the tables in the database so that only DBAs had direct update access to the tables. Any updates to the tables by anyone else had to be via stored procedures. Built in to every stored proc was a bit of code that wrote out the audit history of what was happening (which table, which columns, old data, new data, date and time, user id, etc.).
But it sounds as if you want to keep the impact on your existing system to a minimum, in which case you may end up having to use triggers as the least painful option.
As for log4net, it is a generic logging system that can log pretty much anything you want it to log about the behaviour of your system. You can use it to log debug info, you can also use it to log error conditions for later investigation, you can also use it to log configuration information at system start up, anything you want. I suppose you could use it as part of an audit system in your application, depending on what your requirements were and how strict it needed to be.
|
|
|
|
|
|
we can get an encrypted text by using the below keyword
DBMS_UTILITY.GET_HASH_VALUE in oracle
I need to decript the particular string passed to this keyword
for Eg:
SELECT LTRIM (TO_CHAR ( DBMS_UTILITY.GET_HASH_VALUE ( 'ADMINISTRATOR',2,1048576))) FROM dual;
this will return the encrypted text of 'ADMINISTRATOR' as 121216
But to get the Decryption of that 121216 as 'ADMINISTRATOR'.. is there any keyword used in oracle??
Please help me out..
Thanks in advance..
Stanly.S
|
|
|
|
|
Hashing is not encryption, hashing is a reduction in size, somewhat like an executive summary; it implies throwing away information, hence a one-way operation.
A common practice is to hash passwords and store the result, not the password itself. To check an incoming password, calculate its hash, and compare against the expected hash. No way to retrieve the password, it isn't there at all.
|
|
|
|
|
|
Hi guys
I have two fields, FirstName and LastName. I am able to concatnate both names but if one of the name is null then I don't get the results. For example, First name is John and there is no last name then upon concatanting both names i get null.
I have set the database "Concatenate Null yeilds Null" to True but still no success. Perhaps, could anyone of you help me.
Thanks
|
|
|
|
|
|
netJP12L wrote: First name is John and there is no last name then upon concatanting both names i get null.
netJP12L wrote: I have set the database "Concatenate Null yeilds Null" to True
It sounds like this is doing exactly what you told it to. You could:
1) follow i.j.russell's suggestion and use COALESCE, [edit - added]
2) try changing the setting,
3) write code that tests for Null and handles the various cases, or
4) don't allow Null values in these fields.
Looking through the list, i.j.russell's suggestion sounds very good to me.
Please do not read this signature.
|
|
|
|
|
For MS SQL Server I use ISNULL like ISNULL(FirstName + ' ', '') + ISNULL(LastName, '') I put a space after the first name but if it is null then the space does not get added.
|
|
|
|
|
please go through the below query.
SELECT DR.id
, case PC.id when 4 then sum(amount) end
, case PC.id when 5 then sum(amount) end
, case PC.id when 3 then sum(amount) end
, case PC.id when 6 then sum(amount) end
, case when pc.id = 2 and DP.id = 211 then sum(amount) end
, case when pc.id = 2 and DP.id = 210 then sum(amount) end
, case when pc.id = 2 and DP.id = 212 then sum(amount) end
, case when pc.id = 2 and DP.id = 213 then sum(amount) end
, case when pc.id = 2 and DP.id = 214 then sum(amount) end
, case when pc.id = 2 and DP.id = 197 then sum(amount) end
, case when PC.id = 1 and DP.id3 = 45 then sum(amount) end
FROM
table1 DR
LEFT JOIN table2 DP ON DP.id1 = DR.id1
LEFT JOIN table3 PL ON DP.id2 = PL.id
LEFT JOIN table4 PC ON PL.id1 = PC.id
WHERE
DR.date = GETDATE()
group by
DR.id, PC.id, DP.id, DP.id3
hope you understood my requirement.
i didn't think this is the right way to do.
please help any one can do this in a proper manner.
thanks in advance.
|
|
|
|
|
poornas wrote: hope you understood my requirement.
What is your requirement??
Regards,
Prakash Kalakoti
|
|
|
|
|
SELECT DR.id,
SUM(case PC.id when 4 then amount else 0 end) AS PCID4,
SUM(case PC.id when 5 then amount else 0 end) AS PCID5,
SUM(case PC.id when 3 then amount else 0 end) AS PCID3,
SUM(case PC.id when 6 then amount else 0 end) AS PCID6,
SUM(case when pc.id = 2 and DP.id = 211 then amount else 0 end) AS DPID211,
SUM(case when pc.id = 2 and DP.id = 210 then amount else 0 end) AS DPID210,
SUM(case when pc.id = 2 and DP.id = 212 then amount else 0 end) AS DPID212,
SUM(case when pc.id = 2 and DP.id = 213 then amount else 0 end) AS DPID213,
SUM(case when pc.id = 2 and DP.id = 214 then amount else 0 end) AS DPID214,
SUM(case when pc.id = 2 and DP.id = 197 then amount else 0 end) AS DPID197,
SUM(case when PC.id = 1 and DP.id3 = 45 then amount else 0 end) AS DPID45
FROM
table1 DR
LEFT JOIN table2 DP
ON DP.id1 = DR.id1
LEFT JOIN table3 PL
ON DP.id2 = PL.id
LEFT JOIN table4 PC
ON PL.id1 = PC.id
WHERE
DR.date = GETDATE()
group by
DR.id
modified on Tuesday, March 23, 2010 11:24 AM
|
|
|
|
|
I had thought about answering this as I knew something was wrong but could not think what was. i.j.russell you have hit it on the head.
|
|
|
|
|
Hi everOne
I have used switch case statment before but not sure the way I want to use it is implementable or not. If it is then please could you convert the following code into switch Case statement.
create proc Details_GetBYID
(
@Id int,
@TypeId nvarchar(max)
)
AS
IF @TypeId = 'P1'
BEGIN
SELECT motot.Completed,motot.Hours,motot.Subject
FROM MasterT as motot
INNER JOIN PSALevel as psal on psal.Id = motot.Id
WHERE motot.Id = @Id
END
ELSE IF @TypeId = 'P2'
BEGIN
SELECT motot.Completed,motot.Hours,motot.Subject
FROM MasterT as motot
INNER JOIN PSALevel as psal on psal.Id = motot.Id
WHERE motot.Id = @Id
END
ELSE
BEGIN
SELECT motot.Completed,motot.Hours,motot.Subject
FROM MasterT as motot
INNER JOIN PSALevel as psal on psal.Id = motot.Id
WHERE motot.Id = @Id
END
any help would be appriciated.
thanks in adv.
regards
learner
|
|
|
|
|
|
Hey,
why did you use "ELSE IF" when "ELSE" is same???
thats like
if a = 1 then
"abc"
else if a = 2 then
"222"
else
"222"
|
|
|
|
|
Hi
I want to Call stored procedure inside a stored procedure in sqlserver 2005.
I could not found a good example of the above problem.
Please provide an example
Thanks
|
|
|
|
|
use
Exec ProcedureName @Variable
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hello Folks,
I'm using powershell in conjuction with the Outlook Redemption library in an attempt to import messages already present in a folder on the desktop. Although, the code gives no errors, I just don't see the end result of the message being in the inbox. The code being used is as follows:
-----------------------------------------------
$outlook = New-Object -COM Outlook.Application
$routlook = New-Object -COM Redemption.RDOSession
$routlook.Logon
$routlook.MAPIOBJECT = $outlook.Session.MAPIOBJECT
$msg = $routlook.GetDefaultFolder(6).Items.Add(0)
$msg.Import("c:\test.msg", 1024)
$msg.save
$routlook.Logoff
-------------------------------------------------
Any help will be appreciated.
Thanks.
Kernel
|
|
|
|
|
I'm sure that there is a more appropriate forum for this question to be in.
|
|
|
|
|
Is there any benefit in setting a primary key in a table variable? Especially if you will perform SELECT and INSERT operations on it?
Like,
DECLARE @Tbl TABLE(Id INT PRIMARY KEY, Name NVARCHAR(36))
|
|
|
|
|
John Gathogo wrote: Is there any benefit in setting a primary key in a table variable?
Yes, mainly to ensure referential integrity. That's probably an unsatisfying answer.
Imagine that your table only has "name" defined in it. We could add "John" as a record, and have a list of things that John should do in some other table. Might look like this;
TABLE Users (Name NVARCHAR(36))
"John"
"Peter"
TABLE Tasks (Name NVARCHAR(36), ThingToDo NVARCHAR(50))
"John", "Water the plants"
"John", "Cook dinner"
"Peter", "Write an article for CodeProject"
We're in trouble as soon as someone adds another user with the firstname "John"; we would no longer be able to differentiate between the tasks of the first "John" and the second "John". Now, it's a "best practice" to define a set of column-names that make a record unique. We could add the [Birthdate] of the user to the "Users" table, that way we could distingiush between the first and the second Johnny. It's easier[^] to just add a generated identity and to use that as a primary key.
A primary key is often accompanied by a clustered index. There's a heap of information on MSDN[^], if that is your kind of thing
I are Troll 
|
|
|
|
|
Hi Guys,
I've just finished a .NET application that uses MSSQL EXPRESS as its local temp DB. I just wanna ask, for convenience sake, is there a way i can put SQLEXPRESS into the installation such that it installs "silently", with the other app? I mean, without the user having to run the .exe by himself.
He who goes for revenge must first dig two graves.
|
|
|
|
|
Look Here[^]
Steve Jowett
-------------------------
Real programmers don't comment their code. If it was hard to write, it should be hard to read.
|
|
|
|
|
Thanx. Was quite helpful.
He who goes for revenge must first dig two graves.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
