|
Luc Pattyn wrote: Of course, if the net result would be fewer thread switches (I should perform an experiment), then it would have its merits.
I don't think BeginInvoke has this advantage over Invoke as both are doing the same API call internally. All it does extra is to run the method in a separate thread to get asynchronous nature.
Luc Pattyn wrote: If and when I do some experiments on this, I'll let you know the results.
Thanks. I will be very much interested to hear from you. 
Best wishes,
Navaneeth
|
|
|
|
|
Luc is correct, the right way to do this is to do the operation in another thread and make that thread report back the progress to the GUI thread so it can update progress bars or whatever. This is exactly what the BackgroundWorker component was designed for.
Dave
BTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Why are you using VB6? Do you hate yourself? (Christian Graus)
|
|
|
|
|
The easiest way is to write Application.DoEvents() inside the for loop. This will allow the application to process its message queue and update the Progress bar, but the downside is that your loop can become slower by upto 10 times (or even more).
Using a BackgroundWorker is the most appropriate choice for background activities. It runs your code in a separate thread which allows your main thread to process other messages and update the GUI.
|
|
|
|
|
calling Application.DoEvents() is dangerous; for one it risks a StackOverflowException. I do not recommend it unless I am sure the programmer knows the internals of the Windows messaging system (in which case he probably does not need any advice and wouldn't have asked the question at all).
Luc Pattyn [Forum Guidelines] [My Articles]
I only read code that is properly indented, and rendered in a non-proportional font; hint: use PRE tags in forum messages
|
|
|
|
|
Yes, I know that. I just wanted to give an heads up on why his GUI remained unchanged when his main thread was processing a loop.
|
|
|
|
|
I would like to add that when DoEvents is called, your GUI becomes "alive" in the middle of the process and your user can click buttons and create unstable UI states.
It also seems like calling DoEvents inside a loop may decrease performance to the ground depending on your loop code.
When using threading and UI make sure to use Invoke and BeginInvoke properly to avoid dead locks or racing/overflowing
|
|
|
|
|
Wrong target, I know these things and am reluctant to use DoEvents().
Luc Pattyn [Forum Guidelines] [My Articles]
I only read code that is properly indented, and rendered in a non-proportional font; hint: use PRE tags in forum messages
|
|
|
|
|
Hi!
I understand now, that I was a bit naive about my question.
After a bit of thought, I guess using the BackgroundWorker is indeed the best solution.
In future, I will definitely give more thought to the general division of GUI and program from the start,
not only in the sense of separating the code (what I already did in not using GUI elements to store data etc.) but also in the sense of separating code execution to avoid such deadlocks. Although that means having some kind of state-machine in the GUI to handle the asynchronous working (in most simple cases just 2 states, busy and idle).
A shame that C#/Visual Studion/Runtime lib do not clearly enforce such a separation.
Or is there a framework to enforce(!), not just enable, this ?
Thanks for the discussion, Rolf
modified 2-Aug-18 21:02pm.
|
|
|
|
|
I tried my best to Normalize the tables but someone suggested me there is something wrong.
Could anyone please help me out.
COURSE[CourseCode, CourseName]
INSTRUCTOR[InstructorNumber, InstructorName]
CLASS[CourseCode, ClassCode, InstrNo, InstrName, CourseStartDate]
ENROLLEMENT[CourseCode, ClassCode, StudentNumber, StudentName,Grade]
Relationships: The relationship I have defined are as below.
Instructor and Class tables: 1 to many.
Class and Course: 1 to many
Thanks
|
|
|
|
|
Take it to the database forum... at least.
|
|
|
|
|
|
Hi , have a good day
I hope I can Help
Try this SQL Query
SELECT COUNT(Student) FROM table1 WHERE year = 2009
I know nothing , I know nothing ...
|
|
|
|
|
Hello. I'm having some problems about comparing two pictureBox. I want the other one to be invisible when they have the same image but when I tried it didn't have any changes. How can I do that? Me and my groupmates are creating a game similar to mystery case files: prime suspect and I'm the one who is creating the two player mode. The purpose of making the visible property of the other pictureBox is to let the players know that they already found the image we're asking for them to find but until now I can't still do that. Please help me.
Here's the code I tried to use, this is just one of the pictureBox i want to compare to the other pictureBox:
private void picBoxRandom1_Click(object sender, EventArgs e)
{
if (picBoxPlayerOne1st.Image.Equals(picBoxRandom1.Image))
{
picBoxRandom1.Visible = false;
PlayerTwo();
}
if (picBoxPlayerTwo1st.Image.Equals(picBoxRandom1.Image))
{
picBoxRandom1.Visible = false;
PlayerOne();
}
}
picBoxPlayerOne1st is the pictureBox where the asked image is being shown while the picBoxRandom1 is the pictureBox where the right image is shown. Both pictureBox have random images.
|
|
|
|
|
Image.Equals does a reference comparison and it will always return false since they may be pointing to two different Image objects in memory, even if you loaded them from the same file.
You can achieve this behavior by setting a flag during the loading of these images into the picture boxes by checking if they are loaded from the same file.
|
|
|
|
|
Oh, i forgot to say that the images that the two pictureBox get came from an imagelist.
|
|
|
|
|
The problem is that the PictureBox.Equals method[^] is inherited from object, and is a reference test (as PictureBox is a reference object). What that means in English is that Equals compares the references (in C or C++ that would be a pointer) rather than comparing them bit - by - bit. If the pointers are to different ememory, then the Equals test will return false even if the two images are bitwise identical. You will have to do a bitwise comparison to check they are realy different.
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
"Rumour has it that if you play Microsoft CDs backwards you will hear Satanic messages.Worse still, is that if you play them forwards they will install Windows"
|
|
|
|
|
How can i do the bitwise comparison if the images i get came from an imageList?
|
|
|
|
|
The same way as if they came from anywhere else
|
|
|
|
|
As Harold says, same way as anything else: iterate through the bytes of the image and compare! Won't be quick though!
The MD5 suggestion is not bad - it should be quick, and it will identify non-identical pictures. It could however give false positives. If this is a game, then I assume you have a limited number of different pictures? Take the MD5 hash of each of them and modify the pictures to ensure they all have different MD5 hashes. Then use the MD5 to identify whether the picture is the same, or not. Moves the processing work to offline, so it doesn't become noticable at run time.
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
"Rumour has it that if you play Microsoft CDs backwards you will hear Satanic messages.Worse still, is that if you play them forwards they will install Windows"
|
|
|
|
|
I used a code that uses memorystream so i can save the image to a specific location then convert it to base64String and use that location to compare the two images. I think it does the work i want so i think i'm okay with that. I'll just use the md5 hash code as a backup in case something goes wrong..anyway thanks for the suggestions
|
|
|
|
|
If you already have the image as a MemoryStream, then why go to all that bother? Isn't it simpler to use
byte[] bytes = ms.GetBuffer(); and then compare the two buffers directly?
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
"Rumour has it that if you play Microsoft CDs backwards you will hear Satanic messages.Worse still, is that if you play them forwards they will install Windows"
|
|
|
|
|
Does the MD5 Hash Code Work for you ?
MD5 is embedded in C# .NET
try to get hash for the two images
I know nothing , I know nothing ...
|
|
|
|
|
I have made extensive use of generics in some areas of my reusable framework. However using some of the types in the framework can be troublesome to type. For instance.
NodeHeap<Node<SimplePathFinder<TTileMap, TTile, TData>, TTileMap, TTile, TData>,
SimplePathFinder<TTileMap, TTile, TData>, TTileMap, TTile, TData>
openList = new NodeHeap<Node<SimplePathFinder<TTileMap, TTile, TData>, TTileMap, TTile, TData>,
SimplePathFinder<TTileMap, TTile, TData>, TTileMap, TTile, TData>();
I find that to be very bothersome and troublesome. This wouldn't be so much of a problem if I could use #define like I could in C++.
Has anyone else experienced problems like this? Is there anyway I can hide or compact all of that nonsense?
|
|
|
|
|
If your classes are not sealed, you can create a derived class that points to the most used case.
For example:
public sealed class List:
List<object>
{
}
(the List<T> must not be sealed, the new class can be sealed).
Or, at the unit where you must use the type a lot, you can create a using.
For example:
using MyClass = System.Collections.Generic.List<string>
The main problem with this case is that when you declare a using clause you must always use the full path of every type.
|
|
|
|
|
Excellent. I just create a private nested class for each of the super generic types. It will be relieving to encapsulate all of that craziness. 
Never mind, I can't do that. This is enough to make me switch to C++ permanently.
modified on Wednesday, November 25, 2009 3:15 PM
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
