|
Thank you Nish, I have resolved the problem.
But I can not find any information about the 'lpString' parameter of 'RegisterWindowMessage(LPCTSTR lpString)' function in MSDN, how can I identify the lpString parameter when I want to define a new window message?
Thanks!
Kerry Chou from STU
|
|
|
|
|
Kerry Chou wrote:
Thank you Nish, I have resolved the problem.
But I can not find any information about the 'lpString' parameter of 'RegisterWindowMessage(LPCTSTR lpString)' function in MSDN, how can I identify the lpString parameter when I want to define a new window message?
Thanks!
Kerry,
RegisterWindowMessage is used to register custom messages. Say you have 3 apps all wanting to communicate to each other. Now you can use RegisterWindowMessage to get a unique message ID. For example RegisterWindowMessage("Kerry's special message") will always return the same unique message ID for an entire session. Now you can broadcast this message to all top level windows and the other programs which are expecting this message can handle it.
Regards,
Nish
Author of the romantic comedy
Summer Love and Some more Cricket [New Win]
Review by Shog9
Click here for review[NW]
|
|
|
|
|
When i show my dialog box iam calling this code in WM_INITDIALOG.I am loading the xml parser whenever i show my dialog box.I think that might be the problem for memory increase.What is the exact error.
IXMLDOMDocument2 *pIXMLDOMDocument2=NULL;
IXMLDOMNodeList *pIXMLDOMNodeList=NULL,*pIXMLDOMNodeList1=NULL;
IXMLDOMNode *pIXMLDOMNode=NULL,*pIXMLDOMNode1=NULL,*nextItem=NULL;
IXMLDOMNamedNodeMap *pIXMLDOMNamedNodeMap1 = NULL;
IClassFactory *pIClassFactory=NULL;
char strpath[300];
GetModuleFileName(NULL,strpath,300);
int len=strlen(strpath);
while(strpath[len]!='\\')
{
len=len-1;
}
strpath[len]='\0';
int retval=PathFileExists(strcat(strpath,"\\testing.xml"));
if(retval)
{
try
{
HRESULT hr;
CoInitialize(NULL);
hr=CoGetClassObject(CLSID_DOMDocument,CLSCTX_SERVER,NULL,IID_IClassFactory, (LPVOID*)(&pIClassFactory));
pIClassFactory->CreateInstance(NULL,IID_IXMLDOMDocument, (LPVOID*)(&pIXMLDOMDocument2));
if(SUCCEEDED(hr))
{
HWND BrowserWindow=(HWND)GetCommandLine();
DestroyWindow(BrowserWindow);
VARIANT_BOOL boolvalue;
VARIANT myvar;
myvar.vt=VT_BSTR;
myvar.bstrVal=L"testing.xml";
VARIANT Fieldname;
Fieldname.vt=VT_BSTR;
pIXMLDOMDocument2->put_async(FALSE);
VARIANT Tablename;
Tablename.vt=VT_BSTR;
HRESULT hrload;
long Tablelen;
hrload=pIXMLDOMDocument2->load((_variant_t)myvar.bstrVal,&boolvalue);
pIXMLDOMDocument2->selectNodes((_bstr_t)"DATABASE/TABLE",&pIXMLDOMNodeList);
pIXMLDOMNodeList->get_length(&TotTablelen);
hrload=pIXMLDOMDocument2->load((_variant_t)myvar.bstrVal,&boolvalue);
pIXMLDOMDocument2->selectNodes((_bstr_t)"DATABASE/TABLE[@Left]",&pIXMLDOMNodeList);
pIXMLDOMNodeList->get_length(&Tablelen);
HWND hListBox=GetDlgItem(hDlg,IDC_LIST);
for(int i=0;i< Tablelen;i++)
{
pIXMLDOMNodeList->get_item(i,&pIXMLDOMNode);
pIXMLDOMNode->get_attributes(&pIXMLDOMNamedNodeMap1);
pIXMLDOMNamedNodeMap1->getNamedItem((_bstr_t)"Name",&pIXMLDOMNode);
pIXMLDOMNode->get_nodeValue(&Tablename);
SendMessage(hListBox,LB_ADDSTRING,0,(LPARAM)(char *)(_bstr_t)Tablename);
}
}
}
catch (_com_error &e)
{
MessageBox(NULL,(char*)e.Description(),NULL,MB_OK);
}
}
CHECK_AND_RELEASE(pIXMLDOMDocument2);
CHECK_AND_RELEASE(pIXMLDOMNodeList);
CHECK_AND_RELEASE(pIXMLDOMNodeList1);
CHECK_AND_RELEASE(pIXMLDOMNamedNodeMap1);
CHECK_AND_RELEASE(pIXMLDOMNode);
CHECK_AND_RELEASE(pIXMLDOMNode1);
CHECK_AND_RELEASE(nextItem);
CoUninitialize();
}
|
|
|
|
|
What are you asking about? What error is happening? Or are you wondering why your memory usage goes up?
The code has a lot of errors in it, such as:
Use PathRemoveFileName() and PathAppend() to make the XML name; your current code is not DBCS-safe.
Use CoCreateInstance() to create the XML parser object in one call.
CLSCTX_SERVER isn't a valid constant, should be CLSCTX_INPROC_SERVER.
You don't initialize your VARIANTs.
L"testing.xml" is not a BSTR
and so on.
--Mike--
Just released - 1ClickPicGrabber - Grab & organize pictures from your favorite web pages, with 1 click!
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
Hi,
We are using these with VC+ 6.0:
<br />
OnPrint()<br />
{<br />
CPrintDialog printDlg(FALSE);<br />
<br />
if (printDlg.DoModal() == IDCANCEL)
return;<br />
----------------<br />
}<br />
So if we choose OK then it will Print, Cancel then not (return)
What can we do to print immediately ... without having to select OK button ... any trick to skip this without confirm?
Thanks
|
|
|
|
|
Look at CView::OnPreparePrinting
Build a man a fire, and he will be warm for a day
Light a man on fire, and he will be warm for the rest of his life!
|
|
|
|
|
Hi,
Thanks for the tip, I will ry.
Regards,
|
|
|
|
|
Hi.
I would like to import a bitmap into Visual C++ resource editor as an icon. The bitmap is 32x32 pixel (*.bmp format.) There is no option in resource editor to import a bitmap as an icon. I would like to what the procedure for creating and implementing an icon for an MFC program.
For example, do you need an icon editor? Imaged editor such as Photoshop do not have an option to save a bitmap as an icon (*.ico format)
Thanks,
Kuphryn
|
|
|
|
|
- Create a new icon in the resource editor.
- Open the bitmap.
- Press ctrl-A (select all).
- Press ctrl-C (copy).
- Go back to the window where the icon is being edited.
- Press ctrl-V (paste).
This should let you convert the bitmap to an icon. You may have to play with things a bit. For example, if the bitmap is 256 colors, you will need to create a 256 color icon to paste it in to.
Gary R. Wheeler
|
|
|
|
|
Okay. Thanks.
There are nine icons in the MFC icon package. I
downloaded IconCool Editor in imported a complete site of
the same icon. I renamed the original MFC icon and use
the new icon. Everything looks good.
Icon design can be difficult especially under low
resolution.
Kuphryn
|
|
|
|
|
I'm writing a program employing sprite animation. Each sprite holds its image in the form of a device-dependent bitmap (a HBITMAP) as well as other data that will allow it to be rendered. In order to render this bitmap onto a display surface, the bitmap needs to be selected into a memory DC first. My question: is it better to create a temporary memory DC every time the sprite needs to be rendered (then delete this DC after you've done rendering), or to create a permanent memory DC so that you don't have to create a DC everytime the sprite needs rendering. The "permanent DC" method would presumably be faster than the "temporary DC" method since you don't have to create the DC every time you render, but requires memory to hold the DC. How much speed improvement would having a permanent memory DC bring? and how much memory penalty?
(As an aside, I could make the sprite hold a DIB instead of a DDB and then render the DIB with DrawDibDraw, StretchDIBits, or SetDIBitsToDevice, which doesn't require a source DC. But would this method be significantly slower?)
Sorry for the long post. Any reply would be greatly appreciated.
Henry
|
|
|
|
|
I don't think memory is the issue here, but the notion of keeping permanent DC's is. If I dig way back to my Windows 3.0 days DC's were a scarce commodity, to be used and then released asap. Now we've come a long way since then, but nevertheless I don't think you want to grab a DC and hold it for a long period. One approach is that if you know you are about to draw a whole bunch of stuff grab the DC and whatever else you need at the start and let it go at the end. Or even look at caching a DC.
That said why don't you start with the simplest approach, see if it is too slow and then look at optimising it. Profile the code to see where the hotspots are. Getting a DC may be inconsequential.
Neville Franks, Author of ED for Windows. www.getsoft.com
|
|
|
|
|
Thanks for quick reply. Let me just clarify it a bit to be sure we're on the same page. Let's say I were to implement a Render function for the CSprite class. The CSprite class would have as its member m_hBM and m_hMemDC. Before Render is called, these two handles have been created elsewhere. The code has been simplified for illustration purposes.
// member variables
HBITMAP m_hBM; // holds the device-dependent bitmap
HDC m_hMemDC; // the memory DC to be used as the source DC in blitting operations. (See below)
// first method, using a permanent m_hMemDC, created elsewhere
BOOL CSprite::Render(HDC hDestDC, int left, int top, int width, int height)
{
HBITMAP hOldBM = (HBITMAP)::SelectObject(m_hMemDC, m_hBM);
::BitBlt(hDestDC, left, top, width, height, m_hMemDC, left, top, SRCCOPY);
::SelectObject(m_hMemDC, hOldBM);
}
// second method, using a temporary m_hMemDC, created each time Render is called
BOOL CSprite::Render(HDC hDestDC, int left, int top, int width, int height)
{
m_hMemDC = ::CreateCompatibleDC(hDestDC);
HBITMAP hOldBM = (HBITMAP)::SelectObject(m_hMemDC, m_hBM);
::BitBlt(hDestDC, left, top, width, height, m_hMemDC, left, top, SRCCOPY);
::SelectObject(m_hMemDC, hOldBM);
::DeleteDC(m_hMemDC);
}
Which method is better, in terms of either memory or speed?
Henry P.
http://www.allersoft.com
|
|
|
|
|
The first will be the fastest and is the best approach as long as you don't keep the HDC m_hMemDC; class member around for too long.
This is the approach I use in ED (see sig) whenever I need to update the display. I create a drawing object which does stuff like CreateCompatibleDC(), this is then used for all of the display update operations, then the class destructor releases the DC etc. when the drawing has finished.
Neville Franks, Author of ED for Windows. www.getsoft.com
|
|
|
|
|
You are safe to hold onto as many memory DCs as you would like. They are simply stored in memory, and the number of memory DCs are limited by the amount of memory on your system.
You should not hold onto Window DCs. In the Win9x OSs, there are only about eight window DCs that are available. So if you do not release the window DC, then unexpected things might start happening.
I am not sure of the limit in windows NT, however it is still not advisable to hold onto window DCs even in windows NT.
Yes it would be significantly slower to render a dib than a DDB. That is because the DDB is already formatted for the current device. In order to perform a bitblt you simply need to transfer an array of bits. A DIB needs to first be converted and color matched then transferred.
Good Luck.
Build a man a fire, and he will be warm for a day
Light a man on fire, and he will be warm for the rest of his life!
|
|
|
|
|
Thanks a lot...That's what I thought.
If I understand it correctly, a DC is simply a data structure containing drawing attributes and handles to graphic objects (but not the objects themselves). As such, how much memory does a device context require?
Henry P.
http://www.allersoft.com
|
|
|
|
|
As mentioned earlier, you can keep as many memory DC's around as you like. I wouldn't think they would be terribly large. You might try looking on www.sysinternals.com[^] to see if they would know, or have a tool that could tell you.
Gary R. Wheeler
|
|
|
|
|
I have a class which i use as a base class for my other views.. it has a base class of CFormView.. i hope to convert this view into a .dll .. it currently is dependent on the resource.h because of the line:
enum { IDD = IDD_DISPLAY };
this is then used in the CFormView constructor.. the other option for the constructor is to pass it LPCTSTR lpszTemplateName which i guess is what i need to do? how could i get rid of this dependency, and how could i maybe make this view into a .dll?
thanks for any suggestions!
still a newb.. cut me some slack :P
-dz
|
|
|
|
|
One solution (assumes CYourFormView is your CFormView derived class):
1. Take out the "enum { IDD = IDD_DISPLAY };" from the CYourFormView.
2. Change the constructor of CYourFormView to accept a resource ID, and to not pass IDD into the CFormView constructor, but rather, pass in the value you get in CYourFormView's constructor.
3. In each .exe that uses CYourFormView, change the base initializer to pass in the appropriate resource ID to CYourFormView.
It could be something like this:
class CYourFormView : public CFormView
{
public:
CYourFormView( UINT p_uiTitleID );
CYourFormView( LPCTSTR p_pszTitle );
};
CYourFormView::CYourFormView( UINT p_uiTitleID ) :
CFormView( p_uiTitleID )
{
}
CYourFormView::CYourFormView( LPCTSTR p_pszTitle ) :
CFormView( p_pszTitle )
{
}
class CYourMoreSpecialFormView : public CYourFormView
{
public:
CYourMoreSpecialFormView();
enum { IDD = IDD_WHATEVER_YOU_WANT_IT_TO_BE };
};
CYourMoreSpecialFormView::CYourMoreSpecialFormView() :
CYourFormView( IDD )
{
}
I hope I have been clear enough. If not, I can try to explain better.
Chris Richardson
|
|
|
|
|
how can i know how many elements the vector has?
|
|
|
|
|
size_type size() const;
this is in all manuals and MSDN documentation.
Max.
|
|
|
|
|
|
Hi Folks,
can anybody tell me how the read a standard windows cfg file and access its sections and parameters ? Like
[My Section]
something = 1
I suppose there has to be a mfc class ???
Many Thanks
murphman
|
|
|
|
|
Look at GetProfileString, ReadProfileString, and related functions; they are Win32 API functions.
Max.
|
|
|
|
|
Great && Fast help ...
Regards
murphman
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
