|
Hi.
Does any one know, is there any limit to the buffer size that could be sent at once with the NetworkStream.Write through a socket?.
I'm sending a byte array with a length of 16890, and receiving only a few hundred of them.
networkStream.Write(buffer, 0, buffer.Length);
Please help.
Thanks.
|
|
|
|
|
Hi,
I think you can send as much as you like, if not the Write method should/will throw an exception; however when the network (hardware definition and/or protocol) is somehow limited, the protocol stack and/or driver will chop it into several packets.
Example: Ethernet packets are limited to some 1500 bytes (this relates to the collision detect mechanism,
the maximum length of a connection, and the bit rates).
I doubt a receiver will put them together again, so sending 16890 bytes in a single write may result
in some 11 packets being transmitted and received. That is one of the reasons a Read method always
returns the numbers actually read.
modified on Sunday, January 11, 2009 6:55 PM
modified on Friday, June 10, 2011 12:34 PM
|
|
|
|
|
To expand on Luc's excellent information, the opposite is also true of the data being spread across multiple packets. If multiple pieces of data are sent that are small, depending on how the OS decides to use it's internal buffers, it may combine one of more and send them as 1 packet.
So, you can see that you have to have some way to sort it out on the receiving end since it may be received completely differently than how it was sent.
One approach is to create your own mechanism, or protocol, for transmitting data. A common technique is to perform 2 transmissions, the first is a small amount of data that contains the size of the data to be sent (can be just 4 bytes representing an Int32). And then the second transmission is the actual data. So, on the client end the first transmission would tell the client to expect N bytes of data. Then the client can read until all N bytes are received.
Keep It Simple Stupid! (KISS)
|
|
|
|
|
Lets say I have a database with one table, for the sake of this question, and the table structure is like below:
Customer
========
CustomerID
FirstName
LastName
DateOfBirth
Address
City
Province
Country
PostalCode
I have created a DAL which is a singleton class and has a method called Load() which loads all the customers from the database (Lets not worry about memory issues here). Now what I want to do is allow clients to pass in objects of type T and I will load that object for them. For example, client can pass object X and X only needs CutomerID, FirstName, and LastName and I will load object X with those fields.
The problem is at the design time of DAL I can not anticipate the type clients will pass in. I know I can create a method which takes a generic type and create a constraint on it that it must derive from some class or implement some interface but I can not foretell what interface they should implement or what class they should inherit. A client might pass an object which only requires the ID or 2 fields, or 5 fields and so on.
One solution is clients can pass names of fields in an array and I can return them values in an array but I do not like this option. I want to totally abstract the object loading from the client. Can this be done?
Here is the skeleton:
public class DAL
{
public void Load()
{
// Loads all customers from the database and keeps them in a DataTable
}
public CustomerCollection ToCustomerCollection()
{
// Creates type of Customer which has all fields for customers and adds them to a CustomerCollection
}
public void LoadMe(T unknownType)
{
if (T is SomeAbstractClass || T is SomeInterface) // Not an option
{}
// This method should somehow find the properties of T at runtime and load those properties.
}
}
Note: Both clients and DAL know the fields in the database.
|
|
|
|
|
I don't know if you can use C# 3.0, but Linq would probably be a rather clean solution, something like:
var clientCustomerCollection = from cust in Customers
select new { cust.CustomerID, cust.FirstName, cust.LastName };
Perhaps there's a way to do this which is done by the C# 3.0 compiler under the hood also to some extent in C# < 3.0 apps as well.
modified 12-Sep-18 21:01pm.
|
|
|
|
|
That's the problem with most developers; wasting time trying to recreate the wheel rather than using tools and libraries that have already been built and tested.
CodingYoshi wrote: I want to totally abstract the object loading from the client.
Trying to be all things to everyone is impossible and a further waste of time.
only two letters away from being an asset
|
|
|
|
|
I am not recreating the wheel but looking at the best option to do what I need to do. I am already learning LINQ because Greeeg suggested and seems like this is exactly what I was/am after.
When I answer questions on Code Project, I try to answer the question and follow by suggesting an alternative or better solution.
|
|
|
|
|
CodingYoshi wrote: I am already learning LINQ because Greeeg suggested and seems like this is exactly what I was/am after.
LINQ can create anonymous classes, but that's something completely different than what you asked for. It can't be used to dynamically populate existing classes.
CodingYoshi wrote: When I answer questions on Code Project, I try to answer the question and follow by suggesting an alternative or better solution.
That doesn't get you very far. Quite often people don't know what they want, what to ask for or how to ask for it.
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
This could be done using reflection, but I would not recommend it as it adds a lot of overhead.
I would rather make the class responsible for assigning the values, using an interface like:
public interface IDynamicProperties {
string[] GetPropertyNames { get; }
void SetProperty(string name, object value);
}
The class to be populated could implement it like this:
public Customer : IDynamicProperties {
public int Id { get; private set; }
public string FirstName { get; private set; }
public string LastName { get; private set; }
public string[] GetPropertyNames{ get { return { "CustomerId", "FirstName", "LastName" } } }
public void SetProperty(string name, object value) {
switch (name) {
case "CustomerID": Id = (int)value; break;
case "FirstName": FirstName = (string)value; break;
case "LastName": LastName = (string)value; break;
}
}
}
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
This following console app attempts to use the PDFToImage class (at bottom of this post):
class MainClass
{
[STAThread]
public static void Main(string[] args)
{
if (args.Length < 6)
{
Console.WriteLine);
return;
}
using (StreamWriter sw = new StreamWriter(args[5]))
{
sw.WriteLine(transformPDFToImage(args[0]));
}
}
private static string transformPDFToImage(string input)
{
whatdoiwritehere?PDFToImage(input);...?
}
}
I've tried...
PDFToImage pdf2i = new PDFToImage(input);...but the compiler responds with The type 'org.pdfbox.PDFToImage' has no constructors defined(CS0143)
If I write...
PDFToImage pdf2i = new PDFToImage();...the compiler responds with 'pdf2i' is a 'variable' but is used like a 'method'(CS0118)
Thanks for any help.
For reference, here's the PDFToImage class definition (written in Java). (In my library, it's since been dotnetized, using IKVM, into a .NET-referenceable DLL): http://svn.apache.org/repos/asf/incubator/pdfbox/trunk/src/main/java/org/apache/pdfbox/PDFToImage.java
modified on Sunday, January 11, 2009 4:59 PM
|
|
|
|
|
Correct the class has no constructors that take any parameters, so yes case #1 would be correct.
If you want to rewrite it in C# you would need something like this
public class PDFToImage<br />
{<br />
public PDFToImage() {}<br />
public PDFToImage(string input){ ... }<br />
public PDFToImage( [parameters] ) {... }<br />
public string TransformPDFToImage(...) { ... }<br />
}
only two letters away from being an asset
|
|
|
|
|
Does it go onto the module like this? (Please forgive me, I'm not an OO programmer.):
namespace pdf2jpeg
{
class MainClass
{
[STAThread]
public static void Main(string[] args)
{
if (args.Length < 6)
{
Console.WriteLine();
return;
}
using (StreamWriter sw = new StreamWriter(args[5]))
{
sw.WriteLine(transformPDFToImage(args[0]));
}
}
private static string transformPDFToImage(string input)
{
PDFToImage pdf2i = new PDFToImage();
}
}
public class PDFToImage
{
public PDFToImage() {}
public PDFToImage(string input){ ... }
public PDFToImage( [parameters] ) {... }
public string TransformPDFToImage(...) { ... }
}
}
How would I call that public class PDFToImage from within private static string transformPDFToImage(string input)?
Thanks for your help.
modified on Sunday, January 11, 2009 4:56 PM
|
|
|
|
|
First you need to complete the class, then you instantiate an instance, like you have, and call the method. If this is unfamiliar to you, you need to stop right now and do more studying on the concepts, language and environment.
only two letters away from being an asset
|
|
|
|
|
What you've written is actually incredibly helpful for me. Thank you again for replying to my post.
But may I ask how the calling statement should be written, if both "case" statements 1 and 2 are mistakenly written?
Also, how does one know whthr a class takes a constructor or not. Where did you glean that information?
|
|
|
|
|
e40s wrote: if both "case" statements 1 and 2 are mistakenly written?
What case statements?
e40s wrote: Also, how does one know whthr a class takes a constructor or not. Where did you glean that information?
You can't be serious?!?   If you can't answer this you have no business trying to be a developer.
only two letters away from being an asset
|
|
|
|
|
What I can't believe is why you would even feel worthy of contributing to this board with an attitude like that. Are you one of those insecure types who views questions as stupid?
I come to this, brand new, from VBA; we don't use constructors. It's an innocent question that deserves respect and patience, not condescension and refusal to answer because of your insecurity.
I would prefer that you not reply to any questions I post in the future. Thanks.
modified on Sunday, January 11, 2009 10:24 PM
|
|
|
|
|
e40s wrote: questions as stupid?
not questions, only the people who ask them without knowledge. 
e40s wrote: I would prefer that you not reply to any questions I post in the future.
I would prefer you not asking basic knowledge questions. Guess we can't get what we wish for.
only two letters away from being an asset
|
|
|
|
|
Hi,
I would like to suggest you buy an introductory book on C# and work your way through it.
That will take a few days but it will provide you with all the basic information you are going to need anyway, in a logical order and a consistent terminology; it will teach you all the new concepts and make you feel comfortable with C# much faster than any other way. So go to a book store (or visit Amazon, I prefer the book store though), look at a couple of books, and choose the one that looks most promising to you.
That is what I do for any new language or technology I want to learn.
The refinement is: buy two books, a tutorial and a reference book; and study the tutorial.
The reference book is not absolutely necessary, you can Google or use MSDN for detailed info;
but nothing can replace the tutorial or introductory book.
Luc Pattyn [Forum Guidelines] [My Articles]
I use ListBoxes for line-oriented text, and PictureBoxes for pictures, not drawings.
modified on Friday, June 10, 2011 12:34 PM
|
|
|
|
|
This is a static class, so it seems that you must have a static method in there that returns an initialized version of the class. When you type in your class, type in PDFToImage pdf2i = PDFToImage. Intellisense should return the method you need.
|
|
|
|
|
Thanks for replying to my post. The IntelliSense dropdown contains not a single line of pdfbox-related object at all. I wish it did. The dropdown doesn't even list pdfbox itself.
I don't know if it's because these DLLs were IKVMed from Java bytecode or what.
But--oddly in the same IDE--the mouseover can inform the user, by mouseover caption, that PDFToImage is part of the org.pdfbox namespace. That much shows up.
(I'm using SharpDevelop.)
|
|
|
|
|
I think you should familiarize yourself with the environment and tools before proceeding; i.e. Pick up a basic .NET book and read a little.
only two letters away from being an asset
|
|
|
|
|
I am developing an application in Visual Studio C# 2008 Express Edition.
I need to have a password protected access to a dialog box containing a check box. the value of the check can be only modified if password is provided. The value of the check box should be always available to the application to check the status.
Please tell me how can I accomplish having a password protection to such data.
Thanks,
Karmendra
|
|
|
|
|
Add login to the application and check the credentials when displaying the dialog. It isn't that difficult and there are plenty of examples here and elsewhere. What have you tried so far?
only two letters away from being an asset
|
|
|
|
|
Hi there , i'm trying to create a class in C# to use my Sql operations but i'm facing some problems.
Although i'm using the code to import SQL objects(using system.data.sqlclient;) i can't declare variables such as Sqlcommand or sqlclient for ex.That way the class get's kind meaningless.How can i use them?
Thanks for your help and pacience as you will figure it out i'm learning C# i was a Vb6 coder.
|
|
|
|
|
You mean the compiler doesn't find the SqlCommand and other types? You need to add a reference to the System.Data.dll. In Visual Studio right click on the project and select "Add Reference".
regards
modified 12-Sep-18 21:01pm.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
