|
|
Dear All,
Am running windows XP Pro. SP3. Upon Macafee scan the following shows:
Trojen: Generic.dx , detected as cfg.exe .
On googling, i couldnt find sufficient results. Any help where i can find removal tools? or any way to remove it manually ?
Best regards,
|
|
|
|
|
HijackThis[^] is a great tool for virus removal. It's very advanced though, and scans for common virus connection points rather than know viruses, so it's false positive rate is very high. You must know what you are doing before removing anything found by HijackThis or you'll accidentally end up removing important windows components. If you don't know what you are doing, run the scan and post the log to a security forum. There a specialist forums around dedicated to hijack this log analysis. (Don't post it at CP)
RootKitReveler[^] is a handy tool for scanning for rootkits. Again this is quite an advanced level tool.
Perhaps some alternative (free) virus scanners will be better at removing this virus:
Avg[^]
Avast[^]
Avira[^]
Comodo[^]
There's also a handy service at VirusTotal.com[^]. You can upload suspicious files, and it will run a whole lot of virus checkers against it and give you the results.
Simon
|
|
|
|
|
Thanks for the help guys.
I deleted the file manually and it went fine (it never showed again).
Best regards.
|
|
|
|
|
If anyone is interested in having a look at the product key that is included in a xp cd disk ; then go to : www.KevinDonahue.com and the instructions are on one of the links on the opening page.He says that a couple of the folders are sometimes hidden and that you have to look for the file called " unattend .txt "; if you can 't find the folder and sub folder that contain it.;when you right click on the cd drive and choose "explore" after having put the xp cd disk into the drive.
About a dozen folders and files come up on the screen when you right click on the cd drive and altho the two folders were not listed on my Dell 2006 xp sp2 cd disk ; I was able to easily find the "unattend" file by opening up the " 1386 " folder that is listed and scroll thru the dozens of files which were listed in alphabetical order.
When I clicked on the file it opened up in a notepad format type of document; that says it is " a sample [ Unattended Setup Answere File ] and contains information about how to automate the installation or upgrade of windows so the setup program runs without requiring user input.;and that you can find more information in the ref.chm found at CD:\support\tools\deploy.cab ".
Then;it continues with a few lines of code.
If you scroll to the bottom of the one page file you should see the word 'product key" and a 25 digit number/letter combination next to it.
The product key that was listed in my " unattend " file was "RH6M6-7PPK4-YR86H- YFFFX-PW8M8".
I have two DELL XP-SP2 cd disks: one is a 2005 copy right and the 2nd is a 2006 copy right.
I ran both of those XP cds in the cd drive and the identical product key number was listed in the "unattend" file for each of the XP cd disks.
That product key is alot different than the product key label that is fastened to my computer and it does not work if I enter that product key number [from the unattend file] when prompted to enter the product key if doing a re-installation of the XP operating system.
winch1020
|
|
|
|
|
Its nice being able to do stuff like that for OEM re-branded copies of Windows. Keep in mind that the license is non-transferable and only to be used on the belonging computer, so it might only be legal for Windows reinstallation/customization (I think…)
Don’t forget that this will only work on re-branded CDs which come with when you buy some computers. (Such as Dell, HP, Toshiba etc.)
You can also see the current Windows license key by using a program like magic jelly bean keyfinder.
I would suggest that you remove your entire product key to keep other people from using it (which might invalidate it)
//Johannes
|
|
|
|
|
I am not particularly concerned if someone else tries using that product key as I do not use that type of automated installation procedure [with no user input].
When I do new xp re-installations on my computer; I use the xp cd disc and enter the product key that is on the label that came with the computer ;when prompted by the cd /computer to enter a product key.
Is there a possibility that if that product key that is in the "unattend.txt" file were to become invalidated ;that it would also then automatically invalidate the other xp product key [that is attached to the Dell computer on a label]; and no longer work when prompted by the xp cd to enter a product key number and/or not get activated by the activating wizard after doing a new re-installation using the xp cd.
The "unattend.txt" file and its automated xp re-installations [with or without re-formatting] must be an option used by some companies who have a few or a few dozen computers on a LAN network and allows the administrator to do multiple xp re- installation upgrades simultaneously by remote control.
winch1020
|
|
|
|
|
Hi, I am running Vista Business x64 on two 750GB HDs configured as RAID0.
Both hard discs report R/W errors at bootup and I'd like to move my system over to two new HDs and upgrade a little in the process (the new discs are 2x 1000GB).
So I assume I need to:
1) backup all files to a 5th disk when running some sort of live boot CD OS, so I can access and copy all typically locked OS files.
2) yank the old disks and replace with new, and setup the new RAID 0 (i.e. make the partitions)
3) copy all files back from 5th disk using same live boot CD OS
Here are my questions:
a) how do I make sure the boot sector information is setup appropriately?
b) is there any GPL or similar software that helps with this? If not, any $$$ software?
Thanks,
Ingmar
|
|
|
|
|
|
Hi Gurus,
I have written a windows service in VB.Net, and I want to run it hidden under the main SVCHOST instance like the many other windows-own services. (i.e. Network Connections, Firewall, ...etc)
BR,
Khallaf
|
|
|
|
|
It's probably possible, but as far as I know, MS doesn't publish the interface requirements for hosting your service under svchost. Your service has to be a dll, not an exe for a start, and you control what services are hosted using registry keys (see here: http://support.microsoft.com/kb/314056[^]), but it's not supported by MS, so they don't give out much info.
Why would you want to anyway? What's wrong with the supported way of running services?
Simon
|
|
|
|
|
I had dual OS Win Xp crystal and Vista and i installed windows Xp Professional , now i have two win Xps but no vista is showing in boot option how can i bring my vista option back in boot.ini or something that i dont have to reinstall Vista Again
|
|
|
|
|
You should install the OS's in age order. XP doesn't know about vista, so it accidentally corrupts it's boot sector. Vista on the other hand knows about XP, so will ensure the boot sector remains valid.
Stick the vista dvd in your drive and boot, and run the repair boot sector option. That should sort it out. (Assuming you didn't accidentally install XP over the top of vista  )
We had a similar problem with an old hard drive imager that didn't handle the vista boot sector properly.
Simon
|
|
|
|
|
Every time I start VPC Console, I get the error message below. Choosing to not show the message again doesn't help, and there are no missing VPC's to remove, as instructed. This looks like a registry issue, but Google shows up very little on this issue.
Sorry, forgot the error message, and I can't re-create it.  I moved the VPC folder out from under "My Virtual Machines", and restarted the console, and it still found the VPC folder! 
Anyway, it was complaining that it couldn't find VPC's that were present in the console.
Last modified: 4hrs 41mins after originally posted --
|
|
|
|
|
Your chance of recieving an answer might be slightly higher if you had actually included the error message.
|
|
|
|
|
OK, so I installed 3.5 on my Windows Server 2008 box w/o problem... but on my 2003 one I get an unhelpful "Server Application Unavailable" error whenever i try to run an application under it - I can run simple HTML, classic ASP or even .NET 1.1 applications fine, but change the domain's setting to 2 (doesn't show 3.5 but I gather this is normal..?) in IIS and the error comes.
I can find nothing in the so-called log file... has anyone else encountered this after installing 3.5 on 2003? Any hints? (btw, 2.0 was already installed, and working, on both machines)
cheers
Phil
|
|
|
|
|
You may need to re-register .Net2.0 in order to get this working. Apparently, .Net 3.5 is not a separate item, but an extension of 2.0, and there is no registration tool for it. This blog[^] entry may have some useful hints.
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
Hi Roger,
thanks for replying - as luck would have it I've been out of action since posting due to the dreaded lurgy getting me - ugh. Nasty one doing the rounds....
Actually it was relatively easy in the end: the solution was to create a new application pool and have it run under that, rather than relying on the default one.
cheers
Phil
|
|
|
|
|
hi every one
i want copy data from memory.is it possible ?
there are many tools for dumping process from memory but i want dump data from memory.
for example i want dump Stream of one pdf or doc file from memory . is it possible?
plz introduce me tool or articles about it.
thanks a lot
|
|
|
|
|
HxD[^] allows you to view, edit and save the memory of running processes.
Don't expect to be able to easily dump files out of active memory though. What it will show you is the raw hex values in memory. It will be very difficult to figure out what it all means unless you know exactly what you are looking for.
Simon
|
|
|
|
|
I am using Windows XP SP2 machines.
I have a doubt regarding the current firewall profile (Domain/Standard) used by the computer.
My computer is connected to a domain based network. And my firewall settings shows that "your computer is using the domain settings".
When i disconnect the computer from network the firewall settings shows "your computer is using the non-domain settings".
But in another machine (WindowsXP SP2) always (when network available or not available) shows "Your computer is using the domain settings" (Clue : in this machine i ran the Network Location Awareness service manually. this service was in disabled state)
My question is, depending on what all conditions these display (using your domain/non-domain settings) changes.
Regards,
Krishnakumar
|
|
|
|
|
It's a setting in Group Policies, Administrative Templates\System\Group Policy\Group Policy slow link detection
Default setting is 500kb/s.
The speed is measured by sending two pings to the server, one with and one without payload, and then the time difference between them is measured.
Note that if you disable ICMP on your network, then Group Policy processing will fail.
|
|
|
|
|
Dear All,
Am running windows vista enter. 32 bit on my machine.
When i use the turn-off short key (Alt F4), the shutdown window appears and the first option in the drop down list is " Sleep ".
I want to change the order of these commands, like: i want the first option to be LogOff.
Any Help.
Best regards,
|
|
|
|
|
I don't know if it can be done. these were my original instructions until i saw that the log off item wasn't available.
on your bottom right screen, click on the battery icon. (get it by: clicking the start, right click anywhere on there, and choose "properties", choose the tab page "Notification Area", and check the "Power" checkbox and click "apply"). Then click "More power options" and with your current power setting, click "Change plan settings", "Change advanced power settings". in the tree view, open "Power buttons and lid", "Start menu power button", and then change the value of "Sleep" to log off
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
and he has his profile and created the account as limited, he alwayd drags and drops everything and renames folders and files, and finally I get a messy groups of files and folders.
![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)