|
hi every body
you can show me how to write the code?. thank you very much:
private void saveToolStripMenuItem_Click(object sender, EventArgs e)
{
Graphics g = picturebox.CreateGraphics();
g.DrawImage(picturebox.Image, new Point(0, 0));
Bitmap bmp = new Bitmap(picturebox.Image);
bmp.Save("2.bmp");
}
With this code:
if I insert a file image into picturebox then i can save it. But when I use
the fuctions: FillElipse, FillRectange, Drawline to draw tree,sun, moon ...on picturebox then saving is failure.
And it report fail at line : g.DrawImage(picturebox.Image, new Point(0, 0));
-->Value cannot be null.
Parameter name: image
modified on Wednesday, December 10, 2008 9:46 PM
|
|
|
|
|
Hi,
you clearly did not get it.
A PictureBox HOLDS an image when you assign something an image to its Image property, which you did not do, so your g.DrawImage and new Bitmap lines are bound to fail.
Most Controls (including PictureBox unfortunately) allow you to paint ON TOP of them, which is what you are doing; a simple Panel would serve the same purpose equally well.
A CreateGraphics is not necessary and even a bad idea here. A Graphics.FromImage is recommended.
I suggest you read my previous message again, and start from scratch; I am not going to provide all 10 lines this might take, I am not in the spoon feeding business. It is up to you to read suggestions and documentation, try, debug and learn.
Good luck.
|
|
|
|
|
Hello. I need a help . I m using CrystalReportViewer to display a table from dataset. I want to see specific details of particular id dynamically.
Suppose the table is like this..
A -- B -- C
A1 -- AAA -- BBB
A2 -- BBB -- CCC
,, i can see full details in table but i want to see specific details like if a user enters A1 in textbox1, only A1 details will be shown..
I tried from past 2 days but i can't find a way... i was doing all things from interface, not by programming (by writing codes).. please tell me how to link that textbox with crystal report.. so i can see those data..
Thanks a lot...
|
|
|
|
|
for this u can use crystalreport and file and add parameter field
and create
ParameterFields myParams = new ParameterFields();
ParameterField myParamGuestName = new ParameterField();
ParameterDiscreteValue myDiscreteValue = new ParameterDiscreteValue();
myParamGuestName.ParameterFieldName = "guestname";
myParams.Add(myParamGuestName);
crystalReportViewer.ParameterFieldInfo = myParams;
enjoy this code
diwaker sharma
|
|
|
|
|
sorry dude, i cant understand .. i have crystal report in my file ... where i write these code ?
Do i need to fill dataset ?
My existing code is like this ..
private void button1_Click(object sender, EventArgs e)
{
sqlDataAdapter1.Fill(dataSet11);
crystalReport11.SetDataSource(dataSet11);
crystalReportViewer1.ReportSource = crystalReport11;
}
|
|
|
|
|
|
First you need to add a parameter to your report.
Then (still in the report) add a select query (from memory: right click report - set select - choice your ID column and set equal to parameter)
Then in code you do:
<br />
private void button1_Click(object sender, EventArgs e)<br />
{<br />
sqlDataAdapter1.Fill(dataSet11);<br />
crystalReport11.SetDataSource(dataSet11);<br />
crystalreport11.setparameter("parametername",value);<br />
crystalReportViewer1.ReportSource = crystalReport11;<br />
<br />
}<br />
This is all from memory so you might have to search a bit
O and nobody is going to just write the code for you. But this should help you on your way.
|
|
|
|
|
System.Data.SqlClient.SqlException was unhandled
Message="Parameterized Query '(@A varchar(50))SELECT DS.*\r\nFROM DS\r\nWHERE (A =' expects parameter @A, which was not supplied."
Source=".Net SqlClient Data Provider"
ErrorCode=-2146232060
I get this error in this line
---- sqlDataAdapter1.Fill(dataSet11);
What I did is ... Added a textbox1, button1, crystalreportviewer1 and crystalreport11, crystalreport.rpt..
in crystalreport.rpt, I added a Parameter Field , named "AAAA" and in Set Select Editor, I set equal to parameter and added A=@A in formula editor.. Then i write this code and error happens..
sqlDataAdapter1.Fill(dataSet11);
crystalReport11.SetDataSource(dataSet11);
crystalReport11.SetParameterValue("AAAA", textBox1.Text);
crystalReportViewer1.ReportSource = crystalReport11;
|
|
|
|
|
hey .. just worked tom .. thanks a lot my friend ...
can i have your messenger id if you dont mind ...
|
|
|
|
|
|
It looks like you are trying to fill your dataset with an select query that requires an variable (@A)
Wich is missing. (that is what the error says)
first off all this isn't needed.
You have 2 options:
You select the complete table and do the filtering on the report (that is the way I explained it in earlyer post)
OR
You do the filtering in the select command and NOT on the report (in this case you don't need the parameter on the report)
Both are possible and acceptable, you can do both but that's not needed.
If you choice the second option you need to provide a sqlparameter
something like:
sqldataadapter1.selectcommand.commandtext = "SELECT * FROM table WHERE id=@A";
sqldataadapter1.selectcommand.parameters.addwithvalue("@A",textbox1.text);
sqldataadapter1.fill(dataset11);
crystalReport11.SetDataSource(dataSet11);
crystalReportViewer1.ReportSource = crystalReport11;
and then your report doesn't need the parameter nor needs to filer it (the set select from last post) since you already filterd the data.
(once again this if from memory)
|
|
|
|
|
Another problem, suppose there are two AgentID ... If i enters one agent Id and search for it , it works fine, but when i changes the value in textbox and enters 3nd agent id, it throws an error The SelectCommand property has not been initialized before calling 'Fill'.
I have to search agentid and my search changes frequently .. so its not happing now..
Please suggest something.
|
|
|
|
|
Did you set the selectcommand?
sorry without your code I can't really say what's wrong with it
post your code that you use to fill the dataset
|
|
|
|
|
Hello Sir, actually I use SqlDataAdapter and generate dataset not by coding .. should i do by coding ? I did everything from wizard ..
sqlDataAdapter1.Fill(dataSet11);
crystalReport11.SetDataSource(dataSet11);
crystalReport11.SetParameterValue("AAAA", textBox1.Text);
crystalReportViewer1.ReportSource = crystalReport11;
|
|
|
|
|
Is this all your code?
Where is your SQL string?
The error message you get suggests that the selectcommand from your sqldataadapter isn't set wich from what I can see it isn't.
to set the selectcommand:
sqldataadapter.selectcommand.commandtext= "SELECT [insert your column names here] FROM [insert table name] WHERE [productid]= @id"
sqldataadapter.selectcommand.parameters.addwithvalue("@id",textbox1.text)
sqlDataAdapter1.Fill(dataSet11);
crystalReport11.SetDataSource(dataSet11);
crystalReportViewer1.ReportSource = crystalReport11;
|
|
|
|
|
Hi,
How can we get all workgroups on LAN also computers in that workgroup.
Thanks,
Venky.
venki
|
|
|
|
|
|
Thnaks,
But it gives only our system workgroup but i want all workgroups available on LAN
venki
|
|
|
|
|
hello all
i treid the code below but nothing happens....
//in button write
serialPort1.PortName = "COM1";
serialPort1.BaudRate = 9600;
serialPort1.DataBits = 8;
serialPort1.Parity = Parity.None;
serialPort1.StopBits = StopBits.One;
serialPort1.Open();
serialPort1.Write("A");
serialPort1.Close();
// in Button Read
serialPort1.Open();
textBox1.Text = serialPort1.ReadLine();
|
|
|
|
|
You asked the same question 20 minutes ago. Why are you double-posting? It's rude. You'd better read the documentation instead of double posting.
|
|
|
|
|
Like I said below:
What are you expecting to happen? You can't just write "A" to a serial port and then expect to read it back.
You need to have some hardware connected to the serial port that either responds to data, or transmits data in.
(Stop reposting questions, you'll only annoy everyone and get the same answers)
Simon
|
|
|
|
|
hello Simon Stevens
my requirement is to connect a microcontrolelr to the serial port .
i tried this to see if data is in the buffer ... then it can't be read back
Thanks
|
|
|
|
|
You need to read your micro controllers docs.
Simon
|
|
|
|
|
hello Simon Stevens
first i need to download some data to the microcontroller from my application ... the microcontroller is connected to the Serial port.
When the Microcontroller receives the data it executes its and it returns some data.. at this time i expect this data be in the port and need to read ir from the serial port
i await for u r suggestions on this
Thanks
|
|
|
|
|
TJS4u wrote: i treid the code below but nothing happens....
That's incorrect, as something did happen. Either you didn't see it happen, or you didn't understand what happens.
The serial port doesn't "remember" that you sent an "A", since there is no memory attached to the serial port. Did you get an exception, or did the serial-port just 'eat' the information you sent?
Same problem with reading from the serial port. If there isn't anything attached and sending messages, then there won't be anything to read from the port.
Your best option would be going out to buy a "null-modem cable", or something that can echo the signals from the serial port.
I wish you lots of luck, as you are going to need it 
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
