|
M.Khallaf wrote: 1- Creation of Security Groups is applicable ONLY in an active directory environment.
Wanna bet?? 
M.Khallaf wrote: 2- I'm already an MCSE, come from a networking background, and I use programming for automation and creativity. I'm no part of a programming team, nor a project.
I don't care...
M.Khallaf wrote: 3- Also, to complement the idea, running programs under different credentials can only be achieved using a batch files or tools with which the user MUST have the password for the proposed higher crededntial, or otherwise WILL BE ABLE to read it. It does not make any sense.
You were talking about a service, not an app.
M.Khallaf wrote: 1- Have the system answer me "Access is Denied" if I try to kill the process using - for example - Process Explorer; THE SAME WAY IT RESPONDS WHEN YOU TRY KILL "MCSHIELD.EXE" OF MCAFEE OR "RTVSCAN.EXE" OF SYMANTEC. THIS HAPPENS EVEN WHEN YOU ARE USING THE BUILT-IN FULL CONTROL ADMIN ACCOUNT, AND YOU HAVE FULL OWNERSHIP ON THE PROCESS IMAGE (i.e. FILE ON DISK)
This is only possible if the "process" is running as the System, not a user account. All user account processes can be killed and there's nothing you can do to stop it.
M.Khallaf wrote: 2- Run the process hidden as a module within an SVCHOST instance like the main instance in windows XP wich runs all of the following:
Windows Audio
Cryptographic Sevices
DHCP Client
Error Reporting Services
COM+ Event System
Help and Support
Network Connections
NLA
System Event Notification
Windows Firewall(ICS)
Distributed Link Tracking Client
Windows Time
Windows Management Instrumentation
All of these are non-interactive services. Yes, you can "hyjack" a user-mode but it still doesn't get the full protection your talking about trying to get.
I already told you the only way it works.
As a side, what does all of this have to do with VB.NET??
|
|
|
|
|
It has to do with VB.Net, because I program in VB.Net. Yes, I can still understand examples in C#.Net, but VB.Net is my choice.
Wanna bet?? Smile
Yes, you have ONLY built-in ones.
You were talking about a service, not an app.
You are right about this one, but it does not matter, and you will know why.
This is only possible if the "process" is running as the System, not a user account. All user account processes can be killed and there's nothing you can do to stop it.
This is totally irrelevant. A built-in admin or even an admin member in the built-in admin group has FULL CONTROL on every "breath" that comes in or out of a system. My service runs as Local System and, of course, the built-in admin CAN KILL IT.
You are talking to me as if I was born yesterday. I've been administering netwroks since 2001, and yet I can tell you I had the same illusions about default security permissions and roles of built-in accounts, that were based on the un-realistic "M$ LABS" environment, the days when I was just finished with my MCSE.
All of these are non-interactive services.
Who said that my service is interactive?
Yes, you can "hyjack" a user-mode but it still doesn't get the full protection your talking about trying to get.
I already said that "This is only one step on the way".
You have no clue about the way workgroup security model works in Windows Networks. That I can tell. And yet, you have not answered my questions.
If you don't know the answer, then just quit it, PLEASE!
BR,
Khallaf
|
|
|
|
|
M.Khallaf wrote: You have no clue about the way workgroup security model works in Windows Networks. That I can tell.
No, you can't.
M.Khallaf wrote: es, you have ONLY built-in ones.
Really?? And I supposed the "Debugger Users" group that Visual Studio's installer creates is NOT a security group, even though it specifically gives members elevated permissions to enable the proper functioning of the debugger for those users. Do you want to rethink your answer now??
M.Khallaf wrote: A built-in admin or even an admin member in the built-in admin group has FULL CONTROL on every "breath" that comes in or out of a system.
No, an Admin is NOT God over the entire system. There are restrictions on what an Admin can and cannot do. All you have to do is look in the Local Security Policy tool to figure that out.
M.Khallaf wrote: My service runs as Local System and, of course, the built-in admin CAN KILL IT.
Yeah, you'll note that I never once said that the service has to run under the Local System account. I said the service has to run AS THE SYSTEM. This is a kernel-level account that no user, not even an Admin, can stop. All you have to do to see this is look in Task Manager and look at the account that "System Idle Process" is using.
|
|
|
|
|
OK, I'm in no way into flaming. But, FYI:
Really?? And I supposed the "Debugger Users" group that Visual Studio's installer creates is NOT a security group, even though it specifically gives members elevated permissions to enable the proper functioning of the debugger for those users. Do you want to rethink your answer now??
Another mistake. It is built-in!
No, an Admin is NOT God over the entire system. There are restrictions on what an Admin can and cannot do. All you have to do is look in the Local Security Policy tool to figure that out.
He already has default FC ove it, unless you modify it.
Yeah, you'll note that I never once said that the service has to run under the Local System account. I said the service has to run AS THE SYSTEM. This is a kernel-level account that no user, not even an Admin, can stop. All you have to do to see this is look in Task Manager and look at the account that "System Idle Process" is using.
Another misconception. They are both the same. I only used the TERM more familiar to you as a VS user.
You can't fight a net-admin into his domain. I was only asking for your programming help, but you chose to embarrass yourself.
I advice you to read Russinovich's Microsoft Windows Internals
http://www.amazon.com/gp/product/0735619174/qid=1142840372/sr=1-1/ref=sr_1_1?s=books&v=glance&n=283155
BR,
Khallaf
P.S. I'm on a national holiday, why not give out some net-admin lessons for the deprived
|
|
|
|
|
 Whatever dude...
Oh, BTW. The SVCHOST interface isn't documented for a reason...
|
|
|
|
|
M.Khallaf wrote:
Really?? And I supposed the "Debugger Users" group that Visual Studio's installer creates is NOT a security group, even though it specifically gives members elevated permissions to enable the proper functioning of the debugger for those users. Do you want to rethink your answer now??
Another mistake. It is built-in!
Then how come I don't have it on my local pc?
I don't pretend to know more or even as much as you about this but if it's built-in it should show up right?
|
|
|
|
|
The way this is usually done, is to create a second service, which watches for the first one and restarts it if needed. Of course, this involves you writing the code and I get the impression, despite this being a programming forum, that you're asking an admin question.
Christian Graus
Driven to the arms of OSX by Vista.
|
|
|
|
|
Thank you so much for the concern. I already know about the "coupled-services" trick, and I can write it very easily. I just wanted to know if there was anything special about the way McShield.exe and Rtvscan.exe behave, if someone knew it after all. Orelse, have my service run within the main SVCHOST instance.
Yet, it is not an admin question as much as it is a problem that I want to solve with my VB.Net code. I saw something I liked in an app [or service, for the sake of accuracy ] and I wanted my service to have it. That's all!
BR,
Khallaf
|
|
|
|
|
OK, fair enough. I am pretty sure the coupled services trick is the only way to do that.
Christian Graus
Driven to the arms of OSX by Vista.
|
|
|
|
|
Hello,
I have used following code, it works for one time. As I want loop to work for 4 times. The code should dial number and show dialing status in Listbox. It do this for one time only. When It loop for second time, it do not show any dialing status in Listbox though dialing code executes(I saw thisin debug section).
Private Sub Button9_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button9.Click
Dim th1 As New Threading.Thread(AddressOf Dialsub)
th1.IsBackground = True
th1.Start()
End Sub
Private Sub Dialsub()
For i As Integer = 0 To 4
sw.Start()
System.Threading.Thread.Sleep(5000)
sw.Stop()
Dim tm As TimeSpan
tm = sw.Elapsed
'MsgBox(tm.Seconds)
If tm.Seconds = 4 Or tm.Seconds = 9 Then
' Dim rasconnection1 As New Ras.RasConnection
RasConnection1.PhoneNumber = "#777"
RasConnection1.UserName = "vwireless@ptcl.com"
RasConnection1.Password = "ptcl"
RasConnection1.Dial()
End If
Button9.Text = i
Next
End Sub
Private Sub RasConnection1_DialNotify1(ByVal sender As Object, ByVal e As Ras.RasDialNotify1EventArgs) Handles RasConnection1.DialNotify1
ListBox1.Items.Add(String.Format("{0}", e.ConnectionState, e.Message.ToString))
If e.[Error] > 0 Then
MessageBox.Show(String.Format("{0},{1}", e.[Error], e.Message))
End If
' RasConnection1.Dispose()
End Sub
Please me out to solve this.
|
|
|
|
|
Hi all
I'm working on something where a random num is generated between 0 and a user defined number. I need the random numbers to be in increments of 15 instead of 1
e.g. random numbers between 0 and 90 would only be
0 15 30 45 60 75 90
I figure I can do this by generating the random numbers between 1 and 7 for the above example and then substitute:
15 for 1
30 for 2 etc. etc.
But just though I'd ask here in case there's an easier way?
Appreciate a point in the right direction,
rgds
gerryR
Below is my rand function
Private Function genRand(ByVal intX As Integer) 'Function used to generate a random number between 0 and a given number
Dim intRandNo As Integer
intRandNo = Int(Rnd() * intX)
Return intRandNo
End Function
|
|
|
|
|
Hi, just generate a random integer within the appropriate bounds, then multiply by the increment you want.
|
|
|
|
|
Doh!
Spot on, thanks
|
|
|
|
|
you're welcome.
|
|
|
|
|
First i'd like to get the CELL the user enter info in and use that INFO to query my database to FILL the row the user entered info. in Datagridview. Thank you.
|
|
|
|
|
Depending when you need access to the grid data, you can access the information by e.rowIndex.
For example, in the event, Rowvalidating, I used the following line as part of my data validation:
If (PP_ScheduleDataGridView.Rows(e.RowIndex).Cells("Arrived").Value.ToString <> "") And (PP_ScheduleDataGridView.Rows(e.RowIndex).Cells("Departed").Value.ToString <> "") Then<br />
|
|
|
|
|
My form has one(1) datagridview and 7 textboxes and i need to save info. from the datagridview as well as textboxes into the database on the same form. Pls help
|
|
|
|
|
My form has one(1) datagridview and 7 textboxes and i need to save info. from the datagridview as well as textboxes into the database. Pls help
|
|
|
|
|
I did a search here on datagridview and got 10 PAGES of articles, with a little refining of the search I am sure you will find 1 or more articles to answer you myriad of questions.
It seems obvious that you have no idea about the DGV, try reading some of the articles before peppering the forum with questions.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Can anyone guide me, how to write the code for searching the deatils in alphabetical order like..........
A B C E F G.... Z..
All the alphabets will be in link format like
If u click on 'A' all the names in 'A' as to be displayed maybe using a list box then put all the buttons on the side of it, then the other side will be list view i have the listview working and also added a listbox i can pull the data thru it but i dont know how to tie buttons to it i am using sql server 2005 express hope someone can help me thank you
|
|
|
|
|
You would have logic like for example:
- when button is pressed, you get a connection using SQLConnection
- you create a SQLCommand where you fetch the data and you define the condition using SQLParameter
- then you open SQLDataReader
- you loop through the reader and add the data to the list
- close the connection
Also you should use connection pooling in order to have decent performance.
|
|
|
|
|
ok i am really suck , i got a text file with a list of picture paths eg . c:/test.jpg ect.
the following code below , allows me get the image location one at a time and then add it to imagelist1
my question is how do i add this to a large icons in listview ??
Dim oRead = IO.File.OpenText("C:\pics.txt")
While oRead.Peek <> -1
LineIn = oRead.ReadLine()
ImageList1.Images.Add(Image.FromFile _
(linein))
End While
oRead.Close()
i cant get from imagelist to listview . any help would be great
cheers
luke
|
|
|
|
|
|
Hi all,
I am working in a vb project, which use only .exe file in the end user session. I am having a problem in .OCX file which is .exe not working in Vista and Windows 2008.
I used regsvr32. which required administration authentication. How i can solve this issue.
Can any one help me to resolve this issue. I great full for them.
Thanks in Advance
with regards,
Senthil.S
A Software Engineer
|
|
|
|
|
An ocx cannot work without being registered. On Vista and 2008, this requires an admin. There's no way around it.
Christian Graus
Driven to the arms of OSX by Vista.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
