|
Hi,
I am new to C#.NET..
I am building a C# application which searches for files in the HDD..
However there may be many duplicate files with the same name and same contents..
My objective is to delete the files with same contents..
So, say if there are two files (mscorlib.dll for framework 1.1 and another mscorlib.dll for framework 2.0), the application should not delete them, since they are essentially two different assemblies for different framework and should have different contents in it..
Where as say we have a file (abc.exe and another: pqr.exe) having the same contents(say I copied one and renamed it to another), they should be deleted, since they contain same contents and differ in name only..
How do I apply this?
How can I know the contents of a file?
Do I have to apply some checksome algorithm for that? If so, How? If No, then how to find out whether the contents of two files are same??
Please keep in mind I am doing this only for executables (.exe,.dll,.bat,.com etc)
Please guide..
Any help would be greatly appreciated..
Thanks..
|
|
|
|
|
This sounds like a nightmare. If you do it across your HDD, I will bet money you break somethings.
File.ReadAllBytes will load the files, then you can compare them.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Christian Graus wrote: If you do it across your HDD, I will bet money you break somethings.
Didnt quite get this line.. What might break?? 
Christian Graus wrote: File.ReadAllBytes will load the files, then you can compare them.
How to compare them??
Any particular method in BCL or write an algorithm for that?
|
|
|
|
|
ptr2void wrote: Didnt quite get this line.. What might break??
If you let a process run wild on your machine which randomly decides to delete exe's dll's etc there is a fairly good chance you will break your windows install.
ptr2void wrote: How to compare them??
Any particular method in BCL or write an algorithm for that?
You compare them by comparing their bytes. Try some code, read any exe on your machine using File.ReadAllBytes. Have a look at the return from that method (a byte array) and have a think about how you might compare 2 separate file's bytes (hint: a byte is essentially a number between 0 and 255)
|
|
|
|
|
J4amieC wrote: If you let a process run wild on your machine which randomly decides to delete exe's dll's etc there is a fairly good chance you will break your windows install.
I think you didnt understand my question or maybe I didnt put in a comprehansible manner..
I dont want to delete the searched files on the HDD.. That would be horrible..
I just want to delete(omit) them from my search results !!
|
|
|
|
|
delete implies to remove. "omit from results" has a very different meaning.
|
|
|
|
|
The bolding had a profound effect as well.
"Run for your life from any man who tells you that money is evil. That sentence is the leper's bell of an approaching looter." --Ayn Rand
|
|
|
|
|
ptr2void wrote: Didnt quite get this line.. What might break??
Imagine that you installed two different applications that use the same control (e.g. Excellent.Grid.dll). Your app will find the Excellent.Grid.dll file in two different directories (e.g. C:\Program Files\Excellent Calendar and C:\Program Files\Excellent Cookbook), will delete one copy since they are exactly the same and... one application will stop working.
|
|
|
|
|
You could get the MD5 hash of the file, of course this may take a while. I recomend against your course of action strongly because you may screw something up.
|
|
|
|
|
Hi,
I am using a FolderBrowserDialog to get the user to select a path. I then display the selected path in a text box using the FolderBrowserDialog.SelectedPath property. It works well with anything that's not a non-english version of Vista.
On an Italian version of Vista, for example, the FolderBrowserDialog will display the localized folders, where "Program Files" is "Programmi", etc.
The problem is, if the user selects "C:\Programmi" in the FolderBrowerDialog, when I display the selection in a textbox, it displays "C:\Program Files". From what I understand, the "real" name of "C:\Programmi" is "C:\Program Files" and "Programmi" is just a display name (new to Vista, in XP the display name and real name were both "C:\Programmi").
So my question is: How do I get the display name so that I can show it to the user instead of the real name? Is there a property in either Path or DirectoryInfo or Directory that would do the "Translation"?
Any help on this would be much appreciated!
Hugo Migneron
|
|
|
|
|
<!-- <?xml version="1.0" encoding="utf-8"?>
<BookMarkInfo>
<res>
<X>1.02</X>
<Y>6.58</Y>
<Z>3.26</Z>
</res>
<sirt>
<X1>5.02</X1>
<Y1>3.58</Y1>
<Z1>5.26</Z1>
</sirt>
</BookMarkInfo> -->
I need to parse the above XML file and store in Data structure.
Struct BookMarkInfo
{
double x,y,z;
String bkMrkName;
}StBk[10];
StBk[0].bkMarkName = res;
StBk[0].X=1.02;
StBk[0].Y=6.58;
StBk[0].Z=3.26;
StBk[1].bkMarkName = sirt;
How can I store it?
Thanks
Ash
|
|
|
|
|
I suspect you need to do some reading on XPath and the XML DOM.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
I have a small problem, I am writing an updater for my app. So, it finds the folder my exe is in, and it has a new copy of that exe amongst the files to copy in. I want to show the different version numbers for both exes. This is easy. However, loading the assembly means I can't copy over the file. I've had no luck in trying to load the assembly in another app domain. It doesn't work when then file is not in a subfolder of my exe.
System.AppDomain NewAppDomain = System.AppDomain.CreateDomain("NewApplicationDomain");
Assembly a = NewAppDomain.Load(AssemblyName.GetAssemblyName(Path.Combine(_path, "MyAppName.exe")));
GetAssemblyName gets a valid name, but the Load method cannot find it.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Have you tried using CreateInstance() instead?
Does this help?[^]
From msdn: The Load method of the System..::.AppDomain class can load assemblies, but is primarily used for COM interoperability. It should not be used to load assemblies into an application domain other than the application domain from which it is called.
Simon
|
|
|
|
|
Yeah, I tried that first. I couldn't make that work, either, for my exe which is in a different location.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
How about using a Settings class? Project -> Add New Item -> General -> Settings File. I think the settings are saved in a file so you could check the current version and compare against the version in the settings file.
|
|
|
|
|
There are three exes here. The updater, the installed copy of my app, and a new copy of my app. The updater needs to read the version of the other two exes.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Okay I see. But I think my idea would work. The Updater has a settings file which contains the current version of the installed app. It checks the new version and if they're not equal, do an update.
|
|
|
|
|
I'm getting this in a WinForms project (in a multiple project solution), and can't for the life of me figure out why:
Error - Program 'myapplication.exe' does not contain a static 'Main' method suitable for an entry point myapplication
I verified that the program.cs file was there, and even created a new winforms app to verify that a) the contents of both program.cs files were the same,, and b) the new winforms app would compile (the new app does, the old one doesn't).
I have no idea why I'm getting this error.
EDIT: This only happens when I compile the solution. If I compile the project by itself, it's fine.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
modified on Wednesday, April 23, 2008 7:01 AM
|
|
|
|
|
Um... at risk of inviting your wrath, is there a static void main or a form selected as the entry point in the properties ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Ummm, never mind - it was stupid programmer tricks (I was looking at the wrong sub-project). 
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Hi all, i want use Active Accessibility 2.0 methods in c#.net
how can i use it?
|
|
|
|
|
hi please tll me how to recieve all file names i selected and pressed enter to open with my application
i tried command$ and commandlineargs
but this gave me just one file name with every instance of application
i want a way to get them all together in just one time
i tried startupnextinstance
it is a very slow way
my email:slcompany@maktoob.com
please help.............
|
|
|
|
|
Check this link[^].
*jaans
|
|
|
|
|
The struct in my configuration file of my program is looks like this
public struct Example1
{
public int Vendor1;
public int Vendor2;
public int vendorcount;
}
I can access it by doing this
class MyModule
{
int output = Example.Vendor1;
output = Example.Vendor2;
}
I am planning to add a vendor3 without having to modify the code (MyModule), just the configuration file which contains the struct.
I tried using
for(int x=1;x<vendorcount;x++)>
{
string argument = "Vendor" + x;
Example.argument;
}
which, for obvious reasons, doesn't compile.
Is there a way around this? In which I can just add Vendor3 on the configuration file without having to add a code in MyModule class?
NOTE: The codes have been simplified, like the loading of configuration file, and accessing it
I'd appreciate any help you can give. Thanks
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
