|
No-one is going to trawl through all this source to try to find which line is 207.
I'd guess that the operator = error has to do with VB doing an implicit conversion to a type that does have operator =.
Error 4 is self explanatory. VB sucks. It won't let you call an event, you have to call RaiseEvent.
Error 5 looks like the convertor has failed to properly convert a constructor, at a guess
Error 6, 7, and 8 are all because VB sucks and is not case sensitive. The original code had Mirrored and mirrored defined ( probably as a private variable and a public property. Change mirrored to _mirrored through the code, and then they will not collide.
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
You're right about noone is going to debug all that code. Guess i was a little naive to believe in that. I've found another control that does pretty much the same and in vb.net.
But thanks for trying to help. Maybe i should try out c# some day 
|
|
|
|
|
Hi ,
I am having a panel at runtime , i am adding these oval ,rect ,line to panel at runtime .
Now the problem is i am not able to find the powerpacks controls in a panel
Normally i am able to find controls but these are hiding .
????
Thanks
vb
|
|
|
|
|
You can't add the line drawing controls directly to a panel or other container. You have to first add the drawing control's "Surface" or "Drawing Container" control to the panel control, then add the line and oval controls to that surface control.
I can't remember what it's called, but it's quite obvious what it is if you look through the power pack library the line and oval controls are in.
|
|
|
|
|
Hi
i want to show the listview particular row data into the gridview .that gridview and listview in the same form
For Ex
List view having many data (row by row).in that i wil double click on that particular row that row data should go to gridview in the same form
i thing in listview double click event i want to write coding for this
but i dont know any one help me
iam using vb.net 2005
|
|
|
|
|
So where is the data in the ListView comming from??
Handle the SelectedIndexChanged event of the ListView to get the index of the item in the ListViews Items collection. Once you have that, you can grab the data from the ListViewItem in the collection, and all of the SubItems of the ListViewItem that was selected. You'll have to populate the grid manually with this data or put it into a DataTable object that you build and bind the DataGridView to that.
There's a bunch of different ways of doing this...
|
|
|
|
|
If I run a control method on a BGW why don't the event callbacks that it creates run on the background thread? They seem to fire on the main thread.
Thanks
|
|
|
|
|
You're question is a bit confusing. Which event callbacks are you talking about?? Are you referring to the ProgressChanged, RunWorkCompleted, ..., events exposed by the BGW?? Or are you talking about the events exposed by your other controls method??
If the BGW events, then those events are automatically marshaled back to the UI thread so the developer doesn't have to do anything different than any other controls in order to handler them. It's just an ease of use requirement when the BGW was designed.
|
|
|
|
|
Sorry, let me be more specific. I have a third party control that causes events to be fired. Even if I start that method on a BGW the events fire on the main thread. I guess my question is how does an event know which thread it was called on? Is it possible to make a method fire its events on a separate thread?
Thanks again.
|
|
|
|
|
cstrader232 wrote: I guess my question is how does an event know which thread it was called on?
If the control was created by the UI thread, or dropped on the form, it stays on the UI thread. Events cannot be made to arbitrarily fire on a different thread.
|
|
|
|
|
Hi,
I need to add a progress bar that will progress with the amount of bytes read of a file. I am performing a CRC32 on a large file and I would like to display the progress using the progress bar and also text displaying the percentage done. The crc32 is already running on a seperate thread. Can anyone help.
This is the code for getting the crc32
Dim f As FileStream = New FileStream(path, FileMode.Open, FileAccess.Read, FileShare.Read, 8192)
crc = c32.GetCrc32(f)
lblCRC32V.Text = Hex(crc)
f.Close()
Thanks
|
|
|
|
|
If this CRC library you're using exposes a method to report progress, you'll be in business. If not, you won't be able to do this unless you have access to the source code for the library and add support for reporting progress.
Does the library support this?
|
|
|
|
|
This is the code used for generating the CRC32
Public Class CRC32<br />
<br />
' This is v2 of the VB CRC32 algorithm provided by Paul<br />
<br />
' (wpsjr1@succeed.net) - much quicker than the nasty<br />
<br />
' original version I posted. Excellent work!<br />
<br />
Private crc32Table() As Integer<br />
<br />
Private Const BUFFER_SIZE As Integer = 1024<br />
<br />
Public Function GetCrc32(ByRef stream As System.IO.Stream) As Integer<br />
<br />
Dim crc32Result As Integer<br />
<br />
crc32Result = &HFFFFFFFF<br />
<br />
Dim buffer(BUFFER_SIZE) As Byte<br />
<br />
Dim readSize As Integer = BUFFER_SIZE<br />
<br />
Dim count As Integer = stream.Read(buffer, 0, readSize)<br />
<br />
Dim i As Integer<br />
<br />
Dim iLookup As Integer<br />
<br />
Dim tot As Integer = 0<br />
<br />
Do While (count > 0)<br />
<br />
For i = 0 To count - 1<br />
<br />
iLookup = (crc32Result And &HFF) Xor buffer(i)<br />
<br />
crc32Result = ((crc32Result And &HFFFFFF00) \ &H100) And &HFFFFFF ' nasty shr 8 with vb :/<br />
<br />
crc32Result = crc32Result Xor crc32Table(iLookup)<br />
<br />
Next i<br />
<br />
count = stream.Read(buffer, 0, readSize)<br />
<br />
Loop<br />
<br />
GetCrc32 = Not (crc32Result)<br />
<br />
End Function<br />
<br />
Public Sub New()<br />
<br />
' This is the official polynomial used by CRC32 in PKZip.<br />
<br />
' Often the polynomial is shown reversed (04C11DB7).<br />
<br />
Dim dwPolynomial As Integer = &HEDB88320<br />
<br />
Dim i As Integer, j As Integer<br />
<br />
ReDim crc32Table(256)<br />
<br />
Dim dwCrc As Integer<br />
<br />
For i = 0 To 255<br />
<br />
dwCrc = i<br />
<br />
For j = 8 To 1 Step -1<br />
<br />
If (dwCrc And 1) Then<br />
<br />
dwCrc = ((dwCrc And &HFFFFFFFE) \ 2&) And &H7FFFFFFF<br />
<br />
dwCrc = dwCrc Xor dwPolynomial<br />
<br />
Else<br />
<br />
dwCrc = ((dwCrc And &HFFFFFFFE) \ 2&) And &H7FFFFFFF<br />
<br />
End If<br />
<br />
Next j<br />
<br />
crc32Table(i) = dwCrc<br />
<br />
Next i<br />
<br />
End Sub<br />
<br />
End Class<br />
<br />
Public Class GetCRC32OF<br />
<br />
Public Sub CRC32File()<br />
<br />
End Sub<br />
<br />
End Class
|
|
|
|
|
OK. So add a little code to the main processing loop to fire an event every so often reporting the percentage complete.
You consumer code should create an instance of this class, wireup the event you write and use the data from that event to update the progress bar.
|
|
|
|
|
Newbie here, "Hello" forum.
As the title suggests I'm looking to use the GPS Intermediate Driver parsed API through VB. I'm not a C programmer so this would be a great solution for us VBers...
The API appears to have just 4 functions and eliminates having to directly code to the com port, perfect. (http://msdn2.microsoft.com/en-us/library/bb202033.aspx)
GPSOpenDevice
GPSGetPosition
GPSGetDeviceState
GPSCloseDevice
I'm not familiar enough with how to implement the API to be able to get off the ground, I'm hoping somebody might be able to help out.
Thanks.
TW,
|
|
|
|
|
VB.NET examples using this library are a bit difficult to come by.
I did find the PInvoke signatures of a couple of those functions here[^]. You can figure out the other two using the documentation on the functions are the URL you posted.
|
|
|
|
|
i have got a Strange problem about msinet.ocx while using getheader method.
it is:
i write this code
Private Sub Inet1_StateChanged(ByVal State As Integer)<br />
Select Case State<br />
Case 8<br />
If app_status = 1 Then<br />
'xnei_header = Inet1.GetHeader<br />
Text3.Text = Text3.Text & vbCrLf & "error: " & vbCrLf & xnei_header<br />
app_status = 2<br />
Else<br />
xnei_header = Inet1.GetHeader<br />
Text3.Text = Text3.Text & vbCrLf & "error: " & vbCrLf & xnei_header<br />
End If<br />
If app_status = 3 Then<br />
Text6.Text = Text6.Text & vbCrLf & "error: " & vbCrLf & xnei_header<br />
app_status = 4<br />
End If<br />
Case 12<br />
If app_status = 2 Then<br />
Text3.Text = Text3.Text & ResponseInfo & vbCrLf & vbCrLf & Inet1.GetHeader<br />
End If<br />
If app_status = 4 Then<br />
Text6.Text = Text6.Text & ResponseInfo & vbCrLf & vbCrLf & Inet1.GetHeader<br />
End If<br />
End Select<br />
End Sub
the code write for auto_login to a website
when i post the correct user/pwd data to the site,it will return a http
header with values=302 and if the user/pwd wrong,it will be 200
then inet1 will go on fetching the site
i found i can use getheader method to see if the return value is 302 or 200 while state change to 8
and these code work normally at my home PC(it use a adsl net)
but can not work at my school PC(it use a lan net and after a route)
the vbide show error like this:
RUNTIME ERROR : "35756"
Unable to complete request!
it seems a error accur at xnei_header = Inet1.GetHeader
some people told it is because my pc is after a route
isn't it?
if it is ,please tell me how to solve it, thx
|
|
|
|
|
It probably has something to do with a proxy or firewall server in your schools network. You'll have to examine the returned page data from the proxy in order to figure this one out. It's possible you're not even getting to the page at all because it may be blocked by the proxy.
|
|
|
|
|
yes.all the data will be send by the router,it's ip is 192.168.0.1
but i think other people's gateway might be anyother like 192.168.1.1
so if there some method to get the gateway's ip???
|
|
|
|
|
You don't need it. The TCP/IP configuration is usually setup with the proper gateway address already. The gateway has nothing to do with a proxy anyway. That's seperate, but on smaller broadband routers for the home, a proxy/NAT/firewall is usually found on the same device at the same address.
If Internet Explorer works for outside sites, you don't have to worry about setting up proxy settings. The Inet control uses the proxy settings in IE automatically.
|
|
|
|
|
but how to solve the problem whitch i have meet
|
|
|
|
|
I already told you, you're going to have to examine the page headers and content returned from the page request so you can figure out where the difference is when you request the page via the proxy compared to when you aren't forced to use a proxy.
|
|
|
|
|
ok,i'll get a try,i'am sorry my english is poor
|
|
|
|
|
Hello,
Does anyone know how to enable paging on a datagrid using adodc connection? So far I have almost 1000 records that needs to be displayed. This query dsplays via scroll bar. I'd like divide these records by page. Thanks in advance!
Sorry I forgot to mention I'm doing a windows application not web. I've weird thing is AllowPaging is not available in datagrid option or in any other options. Any help would be much appreciated. Thanks again! 
Aim small, miss small
|
|
|
|
|
As far as I can remember, there is no paging "option" on the old grids. You had to implement it yourself providing code and SQL to grab the next/previous page from the database and bind to that.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
