|
i was making the setup of my applicatins .after i finished making the setup.and the deploying to the machine , which is not having the .net famework , there i got the following error.
i order to install the setup , i need to install the .net framework.
earlier i added the .net framework 2.0 , by right clicking the
setup - add - assembly -i browsed the framework from my hard disk.
Now my question is , the process i am executing is right?
or i need to rectify it somewhere?
is there anything i have to do in the poperties of setup - prerequisites -
Sonia Gupta
Soniagupta1@yahoo.co.in
Yahoo messengerId-soniagupta1
Love is Friendship and Friendship is Love....
|
|
|
|
|
You cannot add the framework to a setup, you can just tell it that the framework is required, and perhaps get it to download and install it. I write installers in C++ that run the framework install, then my MSI
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
suppose i have 100 clients and the database is centralized.then i will install the framework manually on each and every client.
It will become quiet tiresome?
that's y i asked , is there any provision to integrates the exe of the .net framework so that whenever the setup of my program executes , then it instals the setup without asking the dependency.
Sonia Gupta
Soniagupta1@yahoo.co.in
Yahoo messengerId-soniagupta1
Love is Friendship and Friendship is Love....
|
|
|
|
|
Sonia Gupta wrote: then i will install the framework manually on each and every client.
Yes, yes you will. So long as they have to run a .NET app, they need the framework.
Sonia Gupta wrote: is there any provision to integrates the exe of the .net framework so that whenever the setup of my program executes , then it instals the setup without asking the dependency
Yes, I believe you can set up an MSI to download and install the framework. I said that.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
chistian,
there is an option called prerequisites, has it anythig to do with my project relationg to .net framework.
actially the prerequisites contain the .net framework option which is already checked
Sonia Gupta
Soniagupta1@yahoo.co.in
Yahoo messengerId-soniagupta1
Love is Friendship and Friendship is Love....
|
|
|
|
|
Yes, this doesn't package the framework in with your msi, tho, I do believe it means it will try to download it. There's no way to actually put the framework into your installer.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
hi Sonia
this guys are right,everytime when a .net Application is installed in a system that has no .net framework installed. you application will tell the user that the .Net is not installed, and it will give the User an option to Download it. Mybe in the Future Vs it might be incoporated. .net automatically included in your Setup and being installed Silently.
Vuyiswa Maseko
|
|
|
|
|
normally when you build you're setup project you get 2 files: an exe and a msi
if you run the exe the setup will check for the framework, if not installed he will try to download it and install it and then run the msi (ofcourse this requires the pc to be connected to the internet)
|
|
|
|
|
anyone have a good web for tutorial in writing the minesweeper codes? or teach me?
|
|
|
|
|
Did you think to type minesweeper into the search for this site ?
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
I am kinda new to vb.net so please advice me
I am writing an app at which i want to organize my controls in to namespaces
So i write a user contrl class and i placed it in a folder called plugin
When i warp with NameSpace xxx.Plugin and End NameSpace and i switch to desinger view i get this error:
The class Clock can be designed, but is not the first class in the file. Visual Studio requires that designers use the first class in the file. Move the class code so that it is the first class in the file and try loading the designer again.
Please help?
|
|
|
|
|
2hdass wrote: so please advice me
Sure. Firstly, please delete your duplicate post.
I suspect your issue is that the IDE generates two code files ( and I thought generated namespaces based on folders ), so you probably need to change/create the namespace in both files. This is assuming this is a winforms app.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
Hello,
VS 2005 using typed datasets
My customer want to close a form, but before the form closes, they want to be informed of any unsaved changes.
I have list box that is bound to a bindingsource that dislays orders. I also have a bindingsource that is bound to a datagridView. I want to detect changes in these 2 data tables.
I have decided to use MyDataSet.HasChanges(). However, as I have been testing this, i find that it always produces a true, even when I have saved all my data to these 2 tables.
<br />
hasChanges = Me.DsAddComponetAndEquipment.HasChanges()<br />
If (hasChanges) Then<br />
'Inform the user of unsaved data<br />
Else<br />
'Everthing is saved so close form<br />
End If<br />
However, if i do the following:
<br />
MydataSet.AcceptChanges()<br />
MyDataSet.HasChanges()<br />
Then it will be false.
In my typed dataset I have all the data tables for my project, about 30. So maybe it is detecting one of them as been changed. However, even when I don't open this forms that use the other data tables, i still get a true everytime I call the HasChanges. I just want to check only the orders and orderDetails table for changes.
Is there another method for doing this.
As an alternative I tried the get changes for the 2 data tables, if they return nothing, then there are no changes
<br />
dtOrders = Me.MyDataSet.Orders.GetChanges()<br />
dtOrderDetails = Me.MyDataSet.OrderDetails.GetChanges()<br />
However, the above code resulted in an error "OrderDetailsID doesn't allow NULLs" This was because I added a datarow to the datatable (orderDetails) then called the getChanges. Not sure how to solve the above error.
Many thanks,
|
|
|
|
|
Hello,
The following code work well
Dim ds As New DataSet<br />
<br />
<br />
Private Sub frmTry_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load<br />
SqlDataAdapter1.Fill(ds)<br />
dgv.DataSource = ds.Tables(0)<br />
End Sub<br />
<br />
<br />
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click<br />
SqlDataAdapter1.Update(ds) 'Save data to database<br />
End Sub<br />
<br />
Private Sub btnClose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClose.Click<br />
If ds.HasChanges Then<br />
MessageBox.Show("Database has been changed")<br />
Else<br />
Me.Close(); 'Database has not been changed<br />
End If<br />
End Sub
|
|
|
|
|
I am able to stop and start the timer on my program when I click something. But when I try to stop and start a timer in a method that runs when a file is updated, it would stop the timer. WHY?:
Private Sub OnChanged(ByVal source As Object, ByVal e As FileSystemEventArgs)
Me.updateTimer.Stop()
frm.OpenFile(OpenCertainFile)
Do While Not EOF(1)
Input(1, Str.Ticket)
Input(1, Str.Hauler)
Input(1, Str.Truck)
Input(1, Str.Material)
Input(1, Str.DateIn)
Input(1, Str.DateOut)
Input(1, Str.WeighIn)
Input(1, Str.WeighOut)
Input(1, Str.NetWeigh)
Input(1, Str.Loader)
If Str.Ticket = newDataGrid.Item(newDataGrid.CurrentRowIndex, count).ToString Then
MessageBox.Show("Same")
Else
MessageBox.Show("Not same")
End If
count = count + 1
Loop
FileClose(1)
Me.updateTimer.Start()
|
|
|
|
|
Hi Cory,
Maybe I misunderstand your question, or I may just say something stupid, but the first thing that I see happening in this piece of code, is that you are stopping the timer yourself, and then start it again after the update has taken place. Shouldn't that be the other way around?
Johan
My advice is free, and you may get what you paid for.
|
|
|
|
|
Yes, I am opening a file and don't want the my updateList method to run because it opens a file too and I get a error stating it is already open. So, I was able to stop the timer in the Edit_click method but not the onchanged method. WHy? Any ideas?
|
|
|
|
|
Hi Cory,
I am sorry, but as I don't know your app, I don't understand what you mean.
The only thing I can think of that you could try is to add a second timer.
Good luck,
Johan
My advice is free, and you may get what you paid for.
|
|
|
|
|
Can anyone help me with this?
I am able to stop and start the timer on my program when I click something. But when I try to stop and start a timer in a method that runs when a file is updated, it would stop the timer. WHY?:
Private Sub OnChanged(ByVal source As Object, ByVal e As FileSystemEventArgs)<br />
Me.updateTimer.Stop()<br />
frm.OpenFile(OpenCertainFile)<br />
Do While Not EOF(1) <br />
<br />
Input(1, Str.Ticket)<br />
Input(1, Str.Hauler)<br />
Input(1, Str.Truck)<br />
Input(1, Str.Material)<br />
Input(1, Str.DateIn)<br />
Input(1, Str.DateOut)<br />
Input(1, Str.WeighIn)<br />
Input(1, Str.WeighOut)<br />
Input(1, Str.NetWeigh)<br />
Input(1, Str.Loader)<br />
<br />
<br />
If Str.Ticket = newDataGrid.Item(newDataGrid.CurrentRowIndex, count).ToString Then<br />
MessageBox.Show("Same")<br />
Else<br />
MessageBox.Show("Not same")<br />
End If<br />
count = count + 1<br />
Loop<br />
<br />
FileClose(1)<br />
<br />
<br />
<br />
Me.updateTimer.Start()
|
|
|
|
|
i am not too familiar with events in .net
I am wishing make my program fire an event when a variable changes, how can I do that?
thx
|
|
|
|
|
2hdass wrote: I am wishing make my program fire an event when a variable changes, how can I do that?
You can't.
If the variable is a field on the class then you should encapsulate it in a property and have the property's setter fire the event.
This article[^] shows how to use events (See the sibling to sibling section). The event is fired from a method, but a property is just syntactic sugar for a get or set method anyway.
Upcoming events:
* Glasgow: Mock Objects, SQL Server CLR Integration, Reporting Services, db4o, Dependency Injection with Spring ...
"I wouldn't say boo to a goose. I'm not a coward, I just realise that it would be largely pointless."
My website
|
|
|
|
|
Thx
The app I am writing actually wants to read the System's Power State using P/Invoke to the Win32 API on my WM5.0 PDA. I am wondering if there is a predefined event already included in the library/
|
|
|
|
|
could u please tell me a way to send data from a listbox to textbox vb.net 2005
|
|
|
|
|
sixecho wrote: could u please tell me a way to send data from a listbox to textbox vb.net 2005
What data do you want to send from the list box?
Let's assume you mean that you want the text box to display the currently selected item in the list box.
MyTextBox.Text = MyListBox.SelectedItem.ToString();
Upcoming events:
* Glasgow: Mock Objects, SQL Server CLR Integration, Reporting Services, db4o, Dependency Injection with Spring ...
"I wouldn't say boo to a goose. I'm not a coward, I just realise that it would be largely pointless."
My website
|
|
|
|
|
this code was helpful but what i really wanted was to get all the items in the list box at once to the text box...(without selecting any item)...
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
