|
I sort of figured it out. The operation is overlapped so it would return from ReadFile() immediately. So, it looks like I'll have to make a function that will package my data into 20 byte messages - I append time and port number to each 8 or 14 byte messages. And, this function will have to be called from the else block and in the WaitForMultipleObjects switch statement. Sound good?
|
|
|
|
|
Allright, I have some major questions that maybe some one can help me with.
First I am writing a Windows GUI that interfaces to an embedded system via RS232 messages. In order to transmit these messages, I was asked to create a three level OSI protocol stack (transport, network, and datalink.) This stack then communicates back to the application via windows messages (WM_COMM_SENT, WM_COMM_RETRY, and so on...) This uses two threads (send and recieve for each layer) but only the transport thread sends messages.
I have a simple callback system where the transport talks only to the CMainFrame class. The mainframe class handles the messages, queries a messages manager, and then the message manager sends out a WM_COMM_CALLBACK message to each window that needs the data.
The problem is, I am currently trying to interact with the box via the new GUI. The GUI handles a button press, issues the send command in the transport just fine and recieves the data back immediately. However I must release or terminate the current windows message before the messages that come back from the communications stack are processed. This works fine because most of the GUI message handlers are short..., but finally to my question?
Is there a case where during a button press that sends out say 128 messages to handle some of the return messages before the button press message returns back to the message pump? Or is there better system for returning information from the transport... I guess after working 16 hours a day for three weeks to get a demo ready for a trade show and being the only one in a small company that can handle this, I am a little fried and need help walking through the Windows messaging world and threads...
My only other ideas are to release control and wait for the callback before sending the next message, but that limits the functionality of placing a multi-message buffer in the comm stack... or to write a thread that GUI message starts up and then lets it ride until all the messages are sent, however I am already handling so many threads... In other words how many threads are too many threads  .
Any help is appreciated...
Thanks,
Brian
Stop the hatred, free the Mallocs.
|
|
|
|
|
Any process which is syncronchous inside the GUI, should be seperated by implementing within a thread.
I guess from your description.
I would have a thread to process requests from the GUI.
Eg.
CProcessTread
{
AddRequest(...)
ProcessQueue(...)
etc.
AddFeedBackDelegate(...)
}
This frees the GUI to get on with it's own business. "AddFeedBackDelegate" would take call back function to your GUI so that you can be notified of message receipt/delivery. Alternatively you could Send requests back to the GUI via custom WM_APP + 0x??? messages.
I hope I make since, feel free to contact me with a more descriptive email.
Normski. - Professional Windows Programmer
|
|
|
|
|
Hi,
I am begineer in VC++ and C++ programming. I need to write a "Callback function" for performing certain operations in my application.
I need some guidance or article where I can learn about writing callback functions. (Do's and Dont's). I will be greatful to get some information.
Thanks and Regrads,
Arthi
|
|
|
|
|
a callback function is really just a plain C function (not a C++ member function). you give its address (ie. the adress of your function) to another function which will then call your function when it needs to do something (like compare two items in qsort, store info about a font in EnumFonts, etc.) . but there's nothing special about them in general.
here's how you get font info:
BOOL CALLBACK EnumFontCallBack(LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData)
{
TRACE("Get font: %s\n", lplf->lfFaceName);
return TRUE;
}
void CMyDialog::DumpFonts()
{
CClientDC dc(this);
EnumFonts (dc, 0,(FONTENUMPROC) EnumFontCallBack, 0);
}
-c
shh! the audience (and the NSA) is listening
|
|
|
|
|
I would like to know also if the word CALLBACK is significant. Can it be ignored? Do functions declared with the CALLBACK identifier are decorated differntly than other C functions? Can it be replaced with a static C++ method of some class?
Thanks!
Best regards,
Alexandru Savescu
|
|
|
|
|
depending on your build settings and MFC version, CALLBACK is defined as "__stdcall" or as nothing. so, it depends.
-c
Beware the leader who bangs the drums of war to whip the public into patriotic fervor, for patriotism is a double-edged sword. It emboldens the blood and narrows the mind. When the drums of war have reached a fever pitch, the blood boils and the mind closed, the leader will not need to seize the rights of citizens. Rather, infused with fear and blinded by patriotism, they will gladly offer up their rights. How do I know? For this is what I have done. And I am Caesar.
|
|
|
|
|
Hey guys. I'm using Installshield 6 for VC++ and I was wondering how I could get the installer to run a seperate executable during the install. I need to run an app that has a driver bundled in it. It's a pain, I know, but I have no other recourse. Speaking of drivers, does InstallShield provide a way to install device drivers?
Thanks,
-Mike Zinni
Software Engineer
email: mzinni@rimail.com
AIM: zin9999
|
|
|
|
|
InstallShield installing device drivers? Good luck! We have to do what you are trying to do - call a custom DLL from within InstallShield. We're going to a full custom installer becuase of this (and other issues.)
I know it is possible to run an executable or call a DLL from inside InstallShield - try going to the InstallShield website and searching their newsgroups. You may want to write a DLL and launch your EXE from there.
No generalization is 100% true.
Not even this one.
|
|
|
|
|
I need "graph line printing". my app collects some data in a long period, and using GDI API to draw a curve, now i have to wait until having more enough data to draw a curve in a full paper and then print it. i want to print the curve on time and not when having a full paper.
Anyone have any suggestion ? Thanks!
Hello! World!
|
|
|
|
|
I want to initialize a vector or a list with data that is stored in a file. I have not seen any example on how to read this data into the vector or list. All I have seen is an array that is initialized and that data is then placed in the vector. I want to open the file and insert the data directly into the vector. Thanks for the help.
Josh  
|
|
|
|
|
unfortunately, vectors are not file parsers. you'll have to read the data yourself and then insert it into the vector (as you describe).
-c
30% of your base are belong to the IRS!
|
|
|
|
|
This example opens a file filled with ints separated by whitespace and feed them into a vector:
std::vector<int> v;
std::ifstream ifs("test.in");
std::copy(std::istream_iterator<int>(ifs),std::istream_iterator<int>(),
std::back_inserter(v));Of course you can do it the non-STL way, opening the file, reading the data one at a time and pushing into the vector with push_back.
Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
|
|
|
|
|
A vector is an array. This is an old WG issue, and will be corrected. You can assume that the following gives you a pointer to 2048 bytes of contigous memory:
std::vector<char> foo;
foo.reserve(2048);
char* p = &foo[0];
|
|
|
|
|
I'm trying to pass a file path with spaces in the cmdInfo.m_strfile. It only excepts the first letters before the space. ie c:\documents and settings. Only c:\documents copyied into cmdInfo.m_strfile. Any ideas.
Thanks
|
|
|
|
|
Put quotes around the file name, maybe?
cmdInfo.m_strFile = _T("\"C:\\documents and settings\"");
This could be worth a try.
Michel
It is a lovely language, but it takes a very long time to say anything in it, because we do not say anything in it, unless it is worth taking a very long time to say, and to listen to.
- TreeBeard
|
|
|
|
|
What Michel says should work. You can also get at the command line another way - simply access the app's m_lpCmdLine member variable and avoid ParseCommandLine completely. I guess it depends on what you want to do. If you are ever going to have more than one parameter, you'll have no other choice than to surround the file by quotes.
No generalization is 100% true.
Not even this one.
|
|
|
|
|
Hi there,
I'm making an browser and trying to implement full-screen mode.
Stumbled on a problem.
For now I have this code:
// find taskbar window
CWnd* pWnd = CWnd::FindWindow(_T("Shell_TrayWnd"), _T(""));
if(!pWnd )
return;
/*CRect tr;
pWnd->GetWindowRect(&tr);
int th = tr.Height();*/
if( bHide )
{
// hide taskbar
pWnd->ShowWindow(SW_HIDE);
((CMainFrame*)GetParentFrame())->SetStatusBar();
((CMainFrame*)GetParentFrame())->SetToolBar();
((CMainFrame*)GetParentFrame())->ShowWindow(SW_SHOWMAXIMIZED);
bHide = FALSE;
}
else
{
// show taskbar
pWnd->ShowWindow(SW_SHOW);
((CMainFrame*)GetParentFrame())->SetStatusBar();
((CMainFrame*)GetParentFrame())->SetToolBar();
((CMainFrame*)GetParentFrame())->ShowWindow(SW_RESTORE);
bHide = TRUE;
}
It hides the taskbar, maximizes the window and hides status and toolbar.
The problem is that the window does not overlap the hidden taskbar so its pretty useless.
Now I came along this method;
TaskBarList2::MarkFullScreenWindow
It's supposed to do just what I want, but I can't get it to work right.
If anyone can help me, please do.
|
|
|
|
|
When you generate a standard Win32 library in VS.NET there are several paths stored in the library eg.
the relative path to the obj file - debug\stdafx.obj
the full path to the obj file - c:\test\debug\stdafx.obj
the full path to the PDB file - c:\test\debug\vc70.pdb
Is it possible to alter the location of the PDB file as I have the following problem...
I develop a library on my machine in one directory and then book it into the server (copy it to the server). This file is then copied back to my workstation via a library update batch file into a different directory. Now when I compile a program that uses the library I get linker errors because the linker cannot find the VC70.pdb file for the library. If I put the library source back onto my machine in original directory the link is successful.
Can anybody offer any suggestions as to what I am doing wrong and how to correct my build options / procedures?
Steve.
Systems AXIS Ltd - Software for Business ...
|
|
|
|
|
i've not used VC7 extensively, but as far as i know, a .PDB file is only for debugging - it doesn't contain any code.
what kind of linker error are you getting?
-c
30% of your base are belong to the IRS!
|
|
|
|
|
I am trying to get the mini dump debugging working, as suggested by your good self yesterday. To do this I am creating debug information for release builds in .pdb files via the /Zi command line switch to cl.exe. The error I get when linking my test program is...
TEST.LIB(LIBSRC.OBJ) : warning LNK4204: 'C:\TEST\vc70.pdb' is missing debugging information for referencing module; linking object as if no debug info.
Does this give you any more of a clue as to what is going on? How do people usually maintain libraries? Are they always stored and maintained in the same place?
Systems AXIS Ltd - Software for Business ...
|
|
|
|
|
ah... yeah, the .PDB probably contains path info so that it knows where to find the various source files used in building. it's really not a problem with the .LIB. have you tried copying the .PDB over, too?
-c
30% of your base are belong to the IRS!
|
|
|
|
|
Can i do something like this?
[autorun]
open=iexplorer.exe myhtmlfile.html
icon=myicon.ico
label=Internet Explorer
Is there a way to open it in full screen?
Santiago Suárez R.
|
|
|
|
|
You could do something like...
open=iexplore.exe about:<script%20language=javascript>moveTo(0,0);resizeTo(screen.width,screen.height);location.href='whatever.html';</script> But that becomes rather limited.
I'd suggest having your html file contain the JavaScript needed to pull this off.
Jeremy L. Falcon<nobr>
Homepage : Sonork = 100.16311
"It was a blind man who taught me how to see." - Aerosmith
|
|
|
|
|
Hi,
I am learning C++ and have been doing pretty well until I got to this project I needed to complete. It's just a simple database, nothing fancy. I've imported msado15.dll, and have done eveything by the book but I keep getting this error upon executing the program that says "Data source name not found and no default drive specified. My instructor simply said that some people have an ODBC on thier systems and others don't. If I don't then I wont be able to get this to work. I'd like very much to concentrate on database building and design and was wondering if there is any way around this. I have WinXP Home editiion, and have just gotten (although not installed yet) pro. Any ideas would be appreciated.
I did set up my DSN and just now I did it again thinking that maybe something went wrong the last time. Any other ideas?? Please?
Thanks,
Garry
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
