|
its pointer to CProgress
Arise Awake Stop Not Till ur Goal is Reached.
|
|
|
|
|
I suppose that the pointer is allocated before the OnInitialUpdate(before the DDX_Control is executed)
I think you need to debug and step into the functions and look where the error occurs.
you have already a long code? If not so, you can post some pieces
|
|
|
|
|
Dear All
I am in the process of writing one real time program which reads and writes data to and from Parallel port of computer.
Some times I see that CPU usage on my computer goes high and My program cannot read data from port and loss of data occures.
I set my process and thread priority of program as high as possible.
but it is apparant that some times windows OS does not priority of program and give CPU to other processes.
I dont know what is the reason of this High CPU usage on computer.
But if you know What is the source of that and how we can make our computer protected against this problem please let me know.
Regards
Monhi
|
|
|
|
|
Use Real Time OS (RTOS).
Regards,
Paresh.
|
|
|
|
|
how can I download or access this operating system.
Regards
|
|
|
|
|
m_monhi wrote: how can...
By searching for one. For example, VenturCom produces a RTOS. Mentor also produces one. Others.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
I'm sceptical about you needing a RTOS. Modern PCs running standard Windows should be capable of
handling parallel port transfer rates using very little CPU, even with standard priority threads.
I'd look into your design a bit. Are you sitting in a loop on a thread somewhere?
Mark
"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder
|
|
|
|
|
I agree Mark.
He's probably using non-overlapped I/O burning a considerable amount of MIPS waiting on a read operation to timeout blocking write operations, or the other way around, with loss of data as consequence.
Manipulating the thread priorities will usually make the problem worse.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
Roger Stoltz wrote: He's probably using non-overlapped I/O burning a considerable amount of MIPS waiting
on a read operation to timeout blocking write operations, or the other way around, with
loss of data as consequence.
Manipulating the thread priorities will usually make the problem worse.
Yeah that's what I meant  Well stated!!
Mark
"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder
|
|
|
|
|
How to load bitmap and also given text format display on left or right in bitmap in VC++?
Vijayan
|
|
|
|
|
Do you have a bitmap as a resource or a .bmp file ? Could you please be specific ?
Regards,
Paresh.
|
|
|
|
|
If you have a bitmap on resource use of CBitmap but if its a file use of LoadImage and for show it you can use of WM_ERASEBKGND
|
|
|
|
|
Hi, I'm developing an MFC SDI application. I use ActiveX and I wish to show a progressBar during the elaboration time of the AX ( for ex. while loading a report o populing a grid).
I can manage the ProgressBar from all my app but not during the AX's aleborations.
I try to use the timer on a thread, but I'm not able on it and I don't know if it's the better way for do what I need.
Can somebody help me and preferibly post some sample code???
-- modified at 6:24 Wednesday 18th April, 2007
|
|
|
|
|
Not much info to go on here, but let me guess about what I think is going on...
I'll just have a look inside my crystal orb...
In your application you have set up a Single Threaded Apartment (STA) and you're using an ActiveX control from that thread.
At some point you're calling one of the interface methods of the ActiveX control commencing an operation that will take some time to complete. The function call will not return until the operation has completed. During this time you want to display a progress indicator and update it periodically.
If the above is correctly guessed about your situation, then your main problem probably is that your application doesn't process messages while it's executing inside the ActiveX control. The call to the ActiveX is blocking and won't return until finished. This also prevents your user interface from being responsive as well.
There's no sustainable way to fix this. Your main thread has got to process messages if you want to do GUI stuff in that thread.
How it should be done:
The ActiveX control should be implemented to be asyncronous. If an operation is started that will take a relatively long time to complete, the call should return immediately with information whether the operation could be started or not. When the operation completes, the ActiveX should fire an event through a connection point interface. It means that the ActiveX calls an interface implemented by the client. Progress information should be given to the client the same way, but through another method of course.
What could be done:
If the ActiveX control is not your own and you don't have access to the source code for it, there are some workarounds that may do the trick. The preferred solution at the top.
1. If the ActiveX does not have a GUI, you could spawn a UI-thread, initialize another STA and create the ActiveX in that thread. Marshal the interface for the ActiveX back to the main thread to be able to call other functions easily, but when starting lengthy operations you should post messages to the UI-thread so that thread becomes blocked instead.
In your main thread you can update the progress indicator with a timer, typically with CWnd::SetTimer(...). Post a message back to the main thread when the operation has finished.
2. Spawn a UI-thread from which you display a dialog box with a progress indicator while the main thread is blocked. Update the progress indicator with a timer in the dialog box.
N.B. None of the suggested solutions above is easy and if you don't know how to do it, you will have to ask a lot of questions in the VC++/MFC and COM forums.
Read this article[^] regarding how to create UI-threads if you need to.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
Thanks for the answer, you check perfectelly my problem.
I have read the article you link and I try to implement the first solutiona you've suggested.
I made my CMyThread class derived from CWinThread class and create the thread in my app when I need to call the ActiveX functions.
I have some problem:
1. In code when I need to create the Thread attach this code:
CMyThread * thread = AfxBeginThread(RUNTIME_CLASS(C4Thread));
but at compile-time it said "It's impossible to convert from 'CWinThread *' to 'CMyThread *'.
WHY this?
2. In which method of my CMyThread class I must put the code to peform (the call to the ActiveX functions) or I need to implement a new function? In thi case how?
Thanks a lot.
|
|
|
|
|
CDRAIN wrote: I try to implement the first solutiona you've suggested
Well, my first suggested solution wasn't not about UI-threads. It was about modifying the ActiveX control since it would be the best designed and easiest solution.
Your problem is due to the ActiveX control being poorly designed, or you're using it in a way it wasn't intended.
Do you have access to the source code for the ActiveX and can you make modifications to it?
I don't want to encourage you to take the path to a less suitable solution (the UI-thread alternative) unless forced to. :->
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
Sorry, I want to say that I try your second solution...
I don't have access to the source code for the ActiveX, so I try the UI-Thread.
I try to explain my problem: on my thread I must fill a grid control (the ActiveX) and while this i need to refresh a progress bar.
This is the code I use:
Create the thread in which I'll fill the grid
C4ThrGrid * thread = (C4ThrGrid *)AfxBeginThread(RUNTIME_CLASS(C4ThrGrid));
Call the thread's function that fill the grid
thread->openGrid(&m_wndGrid,str,m_inUseSource);
Close the thread is it right
thread->PostThreadMessage(WM_QUIT, 0, 0);
Is it the right way to obtain what I need?
Why at runtime when I create the thread appear a message box that said "Insufficent Memory"
Help!!!!
|
|
|
|
|
CDRAIN wrote: Sorry, I want to say that I try your second solution...
Quite allright, I was only making sure that what I wrote made sense.
CDRAIN wrote: I don't have access to the source code for the ActiveX, so I try the UI-Thread.
Ok. Too bad, though.
This is, like I wrote earlier, not easily circumvented.
CDRAIN wrote: Can you helo whit my problem?
Yes, I can, but I have a limited amount of time so you shouldn't rely on me solely.
If you're not familiar with the things I mentioned in my earlier post, like UI-threads, STA, marshalling and so on; you should expect quite a learning curve before you're done with this.
But consider that a great opportunity to learn! 
Regarding your previous post:
You don't need a CMyThread* member variable. You will only need a CWinThread* variable. The CMyThread class is only needed for the implementation of what the thread should do, respond to messages and what messages to react upon.
Changing the type to CWinThread* will remove your compiler error.
You don't "call" functions in a thread. You comunicate with a UI-thread by posting messages to and from the thread.
Read the article I referred to again, carefully.
The article describes what you have to do, including where to call ::CoInitialize() and ::CoUninitialize() in order to create and tear down the STA.
The first step is to successfully spawn the UI-thread and be able to stop it later.
Before you're finished you also have to:
- Marshal the ActiveX interface back to the main thread with calls to
::CoMarshalInterThreadInterfaceInStream(...) and ::CoGetInterfaceAndReleaseStream(...) - Post a message to the UI-thread when the lengthy operation should be performed with <ode>PostThreadMessage(...)
- Set a timer to update your progress bar and implement the timer message handler with
CWnd::SetTimer(...) and override CWnd::OnTimer(...) - Post a message from the UI-thread when the lengthy operation has completed with
PostMessage(...) - Release the interfaces when you're done in both the main thread and the UI-thread
- Terminate the UI-thread by posting a WM_QUIT message and wait for it to die with a call to
::WaitForSingleObject(...) waiting on the thread handle
I suggest you start a new thread for each question you have and you should probably link to this forum thread to explain the background.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
Thanks a lot for the help... ok I'm able to create a UI-Thread from my MainWnd as I need to get the ActiveX functionality.
My Activex must fill the grid contained on the MainWnd, while the progressBar is incremented.
So I set the timer, that increment the progressbar on the OnTimer event, and create the ui-thread using this code I use:
<br />
thread = new CMyThread();<br />
thread->GripPointer= GridPointer;<br />
thread->par2 = par2;<br />
thread->par3 = par3;<br />
thread->CreateThread();<br />
On my ui-thread code i fill the grid on the Run() method and at the end of the operation I PostMessage(..) to the MainWnd and here I close the ui-thread sending a
PostMessage(WM_INFORM_CLOSE, 0, 0);.
At Run-Time it gives me an error "Not valid pointer' when i call the function to fill the grid on the ui-thread.
WHY?
- Where I need to use the ::CoMarshalInterThreadInterfaceInStream(...) and ::CoGetInterfaceAndReleaseStream(...) method you said, and witch is they're scope? (Sorry I'm newer in this use  )
- Have you an example code?
Another question:
But can I manage a graphic component of the MainWnd (the grid) from the ui-thread?? Is this my problem?
Thanks a lot
|
|
|
|
|
I'm afraid that this solution may be a little bit too complex.
You ask about accessing graphic components in the main window from the UI-thread and whether this is a problem or not. The answer is "it depends on how you do it". You cannot access the components directly since your call is made from another thread and the object map is per thread basis. What you do is post WM_COMMAND messages to the different UI objects in the main window.
I suggest that you revert to my alternative suggestion in my first post: spawn a thread that displays a dialog box with a progress bar prior to starting the lengthy operation from the main thread.
This will save you the trouble of marshalling, sending WM_COMMAND messages to graphic components of the main window etc.
Since it's not possible to implement the "best solution", i.e. refactor the ActiveX component and make it asynchronous, you don't have to make things more complex than necessary. It would be nice to have the ActiveX in another apartment as I suggested, but given your latest reply I realize that it's overly complicated.
The user won't see any difference and in either case he/she won't be able to cancel the lengthy operation, so there's no point in having a "Cancel"-button in the dialog.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
Hi everybody,
If i size the frame, the view also resizes and should adapt the controls.
I wrote already some classes which increases/decreases f.ex. the grid,
repositionate the control for that a button is always at the bottom, ...
I use for this work the "MoveWindow" Funktion.
All will be done in the OnSize-Handler
At the end i set all controls to Invalidate.
In a specific Child-Window i have a very complex structure.
Frame -> View -> TabControl -> Views -> There'in another TabControl -> View
if i size the Frame, all controls inside must be resized.
I SUPPOSE an OnSize-Event is handled via PostMessage, because during the sizing, a delay is
produced in the sub-views.
need i to change the entire Sizing-Message-System for that all Controls (Views,TabControls) are sizing
at the same time?
Big thanks
|
|
|
|
|
I have similar window heirarchy in my apps and all move/resize at the same time.
You shouldn't have to call Invalidate if you use the repaint flag in MoveWindow.
All WM_SIZE messages need to be handled through your window heirarchy where needed.
There should be no delay, unless you coded it that way .
"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder
|
|
|
|
|
Thanks for your reply
Is it possible that the resizing of all sub-controls ( 2 TabControls, Buttons, Grids,...) takes
too long and the sizing of the frame is faster then the execution of all resizing-operations?
Because all sizes correctly, but the frame has always a lead on the controls.
If i stop to resize, then the controls are catching up the frame and the controls have the correct size.
I have an OutlookBar and a TabWnd in the MainView. In the TabWnd, in each Tab a View, there in a TabWnd and in each Tab again a View.
All contents from up the first TabWnd are sizing at the same time as the TabWnd it selfs.
But only the OutlookBar and Main-TabWnd are sizing with a delay 
|
|
|
|
|
baerten wrote: But only the OutlookBar and Main-TabWnd are sizing with a delay
Hmm how are they being resized by the main view?
What do you see when you drag the border of the main frame? If you just see a rectangle then
you may need to change your display settings to show window contents while resizing.
Mark
"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder
|
|
|
|
|
I have a generic View-Class, called UniView. All my views are derived from UniView.
In UniView i color for example the background in light-blue;
If i resize the frame, the frame-border is displayed totally correctly.
The view is also displayed correctly ( the new created space is also light-blue )
I resize the TabWnd and OutlookBar via MoveWindow.
if i size the frame for example for 50pixel larger in a normal sizing speed.
The TabWnd (which takes 3/4 of all the space of the view, the OutlookBar 1/4) sizes in
spaces. F.ex. alyways after 5pixels. Thats the delay 
I removed the some controls/views and all slides correctly.
Propably i have an performance leak in a specific view or all operations together are taking
too long time.
Big thanks nevertheless
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
