|
Well, the most secure scanners actually don't submit any pictures, but the non-secure ones (like MS Digital Persona) do (and they even show theese pictures on the screen).
|
|
|
|
|
I maxed out my memory of my desktop and now any video I play has all sorts of sound distortion or static on it.
I've updated the bios and every driver I can think of. I'm guessing that it has something to do with allocated PCI memory being in conflict with real memory, but my BIOS doesn't let me change allocated PCI memory, only AGP memory.
I've moved the audidy 2 card to different slots and changed bios settings to Plug and play OS and still nothing has worked.
Any advice would be great!
thanks
|
|
|
|
|
this also happened with me when i added some memory to my pc..the built-in sound card wouldn't work anymore even if i removed the new memory!!!!so i put in an old sound card till i find a solution but unfortunately i couldn't...
|
|
|
|
|
The problem is that - on a 32 Bit OS - your memory adresses and PCI addresses conflict (as you already recognized). You should see if there is a "Memory Hole"-Option in your BIOS and toggle it. Additionally, there might be a "Remap memory" option, which you could also activate. Otherwise, the only thing you can do is downgrading to 2 GB.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
thanks everyone.
I upgraded to the lastest bios and there is no such option.
How can intel say that their mobo supports 4 gb without telling me that it doesn't work correctly? I might be able to understand the oversight on a server board, but on a desktop mobo like this one?
They mention what SHOULD happen it in their documentation, but don't tell me how to configure it or address it or anything. Maybe this is all automagical and there is a probelm with the sound card not telling the BIOS that it needs some more memory or something. who knows.
Thanks again everyone.
"The D875PBZ utilizes 4GB of addressable system memory. Typically the address space that is allocated for PCI add-in cards, AGP aperture, BIOS (firmware hub), and chipset overhead resides above the top of DRAM (total system memory). On a system that has 4GB of system memory installed, it is not possible to use all of the installed memory due to system address space being allocated for other system critical functions. These functions include the following:
- Memory mapped I/O that is dynamically allocated for PCI and AGP cards
- AGP aperture
- APIC and chipset overhead (approx 18MB)
- BIOS/firmware hub (approc 2MB)
The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. For example, if the PCI cards are requesting 200MB of system memory and the AGP aperture is set to 256 MB in the BIOS setup program, there will be approximately 3.54 GB of memory that can be accessed . . . All installed memory can be used when there is no overlap of system addresses. For example, all of the system address space can be utilized on a system that has 2GB of installed system memory, AGP aperture set for 256 MB, and the PCI cards are addressing 200MB of system address space."
|
|
|
|
|
I've been searching for a way to do this and so far all efforts have failed :P
When i set a global mouse hook, no event is detected when i press a mouse tilt...just wondering if anyone has any suggestions.
I dont even think its possible to set a key to its action in microsoft's intellipoint software...thats the reason i'm doing this...i want to bind those keys.
|
|
|
|
|
check the new WM_APPCOMMAND messages
http://www.microsoft.com/whdc/device/input/5b_wheel.mspx
"However, buttons 4 and 5 are not mapped to any specific User32 or Shell functionality; instead these buttons can be mapped by software applications to application-specific functionality. More specifically, these buttons are mapped to new WM_APPCOMMAND messages that are in Windows to notify software applications of application command events."
Somthing like this:
Public defWindowProc As Long
Public Const GWL_WNDPROC As Long = (-4)
Const WM_APPCOMMAND As Long = &H319
Const XBUTTON1 = &H80010000
Const XBUTTON2 = &H80020000
Public Declare Function GetWindowLong Lib "user32" _
Alias "GetWindowLongA" _
(ByVal hwnd As Long, _
ByVal nIndex As Long) As Long
Public Declare Function SetWindowLong Lib "user32" _
Alias "SetWindowLongA" _
(ByVal hwnd As Long, _
ByVal nIndex As Long, _
ByVal dwNewLong As Long) As Long
Private Declare Function CallWindowProc Lib "user32" _
Alias "CallWindowProcA" _
(ByVal lpPrevWndFunc As Long, _
ByVal hwnd As Long, _
ByVal Msg As Long, _
ByVal wParam As Long, _
ByVal lParam As Long) As Long
Public Function WindowProc(ByVal hwnd As Long, ByVal Msg As Long, ByVal wParam As Long, ByVal lParam As Long) As Long
'Subclass form to trap messages
On Error Resume Next
Dim retVal As Long
'First let the original Window Procedure process the message.
'CallWindowProc returns the part of the form the mouse is on.
retVal = CallWindowProc(defWindowProc, hwnd, Msg, wParam, lParam)
'What message received?
If Msg = WM_APPCOMMAND Then
If lParam = XBUTTON1 Then
Form1.Print "XButton 1 clicked"
ElseIf lParam = XBUTTON2 Then
Form1.Print "XButton 2 clicked"
End If
End If
WindowProc = retVal
End Function
Private Sub Form_Load()
'Begin the subclassing of frmMain by passing the
'address of our new Window Procedure. SetWindowLong
'returns the address of the original Window Procedure,
'so we store it in a global variable to restore
'when stopping the subclassing (typically, in the
'Unload event).
defWindowProc = SetWindowLong(Form1.hwnd, GWL_WNDPROC, AddressOf WindowProc)
End Sub
Private Sub Form_Unload(Cancel As Integer)
'restore the original Window Procedure
'before unloading the form, or GPF will occur
If defWindowProc Then
Call SetWindowLong(Form1.hwnd, GWL_WNDPROC, defWindowProc)
defWindowProc = 0
End If
End Sub
Hope this helps.
progload
-- modified at 1:12 Tuesday 24th January, 2006
Just Another Note: If you still don't see the messages, you'll need to do your own filter driver to do it.
progload
|
|
|
|
|
Hi,
I need to write a program that controls a camera we use in the lab and get the data. But to do that we need to call some system dll's. (This is because the camera connects to the computer through the USB port and we pretty much have to write the driver). We are actually using Matlab for data processing, but I couldn't call some functions because they need pointers, and Matlab apparently doesn't support pointers. If anyone knows anything about making pointers in Matlab, that would be greatly useful too.
thanks
A.S.
|
|
|
|
|
Try googling for "dual photography" and "SIGGraph" and contact those guys. They use a digital camera for image processing with matlab, and I believe they released the source. If you cannot use the source (if its released) you could at least ask them for a few hints.
OT: That dual photography thing was awesome. With one camera and a digital projector they could generate pictures of the photographed images from the projectors point of view.
They had the camera pointed at the back of a card (ace of spades I believe) and a projector illuminating the front (both at an angle). By evaluating the pictures of the camera, they could create the image as it would have been if the positions of camera an projector were switched.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
Hi can you help by using vb.net
to get Access USB through vb.net
AMR-CIS
|
|
|
|
|
Hi,
I'm looking to get a laptop to do some MFC, C++ Windows programming. Looking to get a 14" widescreen. Does anyone have any good suggestions? Is AMD64 ok, and can I port it to a Intel-based system later?
|
|
|
|
|
skyll wrote: Is AMD64 ok, and can I port it to a Intel-based system later?
AMD is identicle operation as Intel. Even down the SSE/SSE2/SSE3 instruction sets. There are different optimizations for each if you want to improve performance, otherwise everything still works. Work buys only Intel, from XEON to Centrino, I buy AMD at home, I even have the new X2 chip, all my software runs just as well on my home system as work, especially now that I have the X2 chip since my software has always been multi-threaded, since 1993.
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
would you get a AMD64 or a intel dual core that's 32-bit. and what's your favorite laptop to code on.
|
|
|
|
|
I would get a AMD64 in case you want to code for 64 bit processors in the future. At least then, you have the option to. A dual core system from intel would only benefit you if you are building/using multi-threaded applications.
|
|
|
|
|
You'll see modest gains even if your app is single threaded. If your background processes are consuming 5% of your cpu in a single core proc your main app only has 95% of your cpu time available, in a dualcore setup it can have 100% of a single core. Unless you're buying bleeding edge hardware though unless your background load is heavy you'd get better bang for the buck with a single core than an equivilantly price dualcore.
|
|
|
|
|
Hello,
I am interested in building a Media Center PC, to be able to stream recorded television shows to an Xbox 360 (for HD output), and then into a television. However, I have a couple of questions regarding this matter.
I have found the answers to the majority of my questions in the Microsoft Windows Media Center Edition FAQ on Microsoft's website. The three major questions that I have not found answers to are:
Can I connect the Media Center PC and use the Local Area Network on the Media Center PC? (Can I view the Media Center PC's files, play LAN games with Media Center PC on a different computer that runs Windows XP? Also, could I use a network printer on the Windows Media Center PC?)
Would a dual core processor, a AMD Athlon 64 Bit 3800+ X2 have more power or perform more efficiently than (for an example) an AMD Athlon 3800+ single core processor?
Another question to the folks that have used Windows Media Center 2005 is that, can I stream videos to other devices that haven’t been recorded using Windows Media Center? (Could I send previously recorded television shows to the Xbox 360 for playback on the television even if the videos were not recorded using the built in features of the Media Center PC?)
Thanks
Mitch
My sig:
"And it is a professional faux pas to pay someone else to destroy your computer when you are perfectly capable of destroying it yourself." - Roger Wright
-- modified at 0:58 Tuesday 3rd January, 2006
|
|
|
|
|
Hi,
as part of a project, my intention is to connect the parallel port to the UART module of another chip.. using Win XP.
it would be good, if i can find some reference to such work before..,
please help..
subramanian
Subramanian
|
|
|
|
|
Buffer the parallel data and move them out into the serial, it can be done with a buffer chip like 74HC244, but remember to take care of the timing, the easier way of-course is to write a program for a PIC or any other microcontrollers that you might have to take in the parallel data and transport them to the UART,
|
|
|
|
|
Hi,
i m writting application to make backup on Tape Drive using Microsoft Tape Format Specification . i m having problem in writting the last Descriptor block and don't know where to find the solution of this problem .
Plz Reply......
Touseef Afzal
"I only fail when i give up "
|
|
|
|
|
|
|
Do you use any SECS/GEM driver currently in your development?
Insphere Technology
|
|
|
|
|
If you want to advertise, buy an advertisement. This post is an example of what normal people call spam.
Ryan "Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"
|
|
|
|
|
I thought I would throw this out to fellow CPians.
My home office is small, and I need a server machine to test some development
ideas. Bleeding edge cpu is not important, nor is graphics, but decent dual hard
drives are.
Being that the office is small, I need a quiet system as reasonable possible.
Any suggestions for equipment?
thanks
C. Gilley
Will program for food...
My son's PDA is an M249 SAW.
|
|
|
|
|