|
Hi,
I have an 80GB IDE hard disk with multi boot with Linux and Win2k professional and plan to buy a Maxtor/WD SATA 250GB+ HDD. I was wondering if using manufacturer supplied software can I mirror from IDE to SATA. The pain of reinstalling 3 OSes and gazillions of softwares, some of which I have lost the registration info for, is not worth upgrading to me. I know using Ghost/Partition Magic I can achieve this but thats like spending $50-$80 more.
|
|
|
|
|
Hook both HDDs up to your computer, boot the computer using a Live-Linux-CD/DVD, partition the new HDD, use DD to copy your data over, reconfigure your boot-manager, unplug old hdd, reboot, if it works, throw the old HDD away or send it to me.
|
|
|
|
|
Does Linux dd command work with NTFS and its permissions? Thanks for the reply.
|
|
|
|
|
Anonymous wrote:
Does Linux dd command work with NTFS and its permissions? Thanks for the reply.
dd does a binary image of the disk, it actually doesn't have any filesystem concepts.
I see dead pixels
Yes, even I am blogging now!
|
|
|
|
|
Anonymous wrote:
if it works, throw the old HDD away
IDE hard-drives make great walk-away backup drives using a $30-$60 USB/Firewire case.
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
Hello everybody
Could someone please tell me how to disable the line in and mic in on a soundcard, or if it is possible. If possible could the solution be in C++. I have worked with the soundcard before and used the Windows Multimedia Library to allow the wavein and waveout commands etc, but I am trying to temporarilly disable the inputs on the card whilst an output is perfored to the speakers.
Thank you very much for your time.
Regards
Ivan Draper
|
|
|
|
|
I can't believe I just had the dumbest argument in my life with a guy that is trying to tell me that RAID 1 is useless.
He says that it 'cuts your server performance in half' and is trying to tell me that instead we should set the drives up in the servers as stripe sets and then have mirrored servers.
Sheesh…. Trying to build a reasonable system for a small company here (best performance for the buck) and here is trying to convince me to buy 2 servers to do what I can get one to do. I have used RAID 1 for years and never seen a noticeable loss in performance unless you do the mirroring in software and not with a controller.
Sure, if I was going for high speed AND high availability I would use mirrored stripe sets, but I still would not bother mirroring the servers. The company is not that big and does not have the cash to spend.
Just needed to vent.
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
My Blog[^]
|
|
|
|
|
Depends on your setup. If you have IDE drives and both drives are on the same channel, you are going to get something of a slowdown as IDE doesn't have asynchronous capabilities. But you're right, with a hardware RAID setup, and SCSI drives, you shouldn't see very much of a slowdown (one drive will always acknowledge before the other - the controller should not acknowledge until both drives have).
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Mike Dimmick wrote:
If you have IDE drives and both drives are on the same channel, you are going to get something of a slowdown as IDE doesn't have asynchronous capabilities.
Does SATA suffer from this as well? I am just starting to take a look at this tech (always did SCSI before) and was wondering...
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
My Blog[^]
|
|
|
|
|
I'm pretty sure Serial ATA only supports point-to-point links, it is not a bus. Therefore yes, since each controller port only talks to one drive, the problem disappears.
Intel's current ICH6 I/O Controller Hub chip implements four SATA ports. Most add-in cards also offer four ports, I believe.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Thats what I thought.
Thanks.
...time to play.
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
My Blog[^]
|
|
|
|
|
Really cheap! Do you think this is a self-service store?
Don't try it, just do it! 
|
|
|
|
|
|
Now the USB harddisk could not be recognized by the system.
How to repair it?
Thanks!
|
|
|
|
|
It should still be recognized.
Try replugging it into a different USB-port and into a different computer (using proper dismounting). This could be the solution to your problem.
If it is not, you have probably killed the indizes or partition tables. That happens when you unplug an USB-HDD while it is writing.
You may also have fried the USB-to-IDE bridge, which sits between the built-in HDD and your computer.
You might want to try to use the Administration panel (right-click on the "my computer" icon) to re-partition the drive. That is the quickest solution if there is no important data to recover. If there IS important data to recover, try using a different USB-to-IDE bridge and/or plug the drive directly into a IDE-channel and try reading it from there.
If its recognized, but not accessible, a disaster-recovery tool might help. AFAIR, SpinRite (www.grc.com) can recover destroyed indizes and tables.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
I want to write a program in VB.Net which accesses my computer's COM-Ports. While using windows 98 this is no problem, because there's a DLL which I can use.
While using XP this is not possible because of HAL (Hardware Abstraction Layer).
I already know that with HAL, it is possible to access COM-Ports by open a file. The problem is that I don't just need the TXD/RXD port but also ports like RI or RTS.
How can I manage this?
(Maybe there are drivers who create a virtual COM port and translate it to HAL to use the real port?)
|
|
|
|
|
http://msdn.microsoft.com/msdnmag/issues/02/10/NETSerialComm/default.aspx
|
|
|
|
|
No, you can't access the serial ports by simply using IN/OUT instructions as you may have done in DOS. On XP, those I/O ports are restricted to supervisor mode (the kernel). You must use the serial communications APIs. Unfortunately this is one of the less-well documented areas of the Win32 API.
To be notified when the Ring Indicator or Clear-To-Send (i.e. the PC's view of the other end's Ready-To-Send line), use the WaitCommEvent[^] API.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Thanks to you, I've now found a way to use the PORT.dll with WinXP as well, and it's nearly the same as with win89: You just have to set the outports to 0 at the beginning.
|
|
|
|
|
|
I've never heard a thing like this.
Windowsupdate does never change hardware settings if the user does not select driver updates from windowsupdate.
Don't try it, just do it!
|
|
|
|
|
|
As long as you don't accept any driver updates you should be alright. I foolishly accepted a new driver from Microsoft once for my wireless card, and it caused the card to cease working, and the computer to become unstable. Fortunately, XP now has the Restore function - you could make a restore point, then do an update. If anything breaks, you should be able to roll it back. As far as I've seen, there is no check for signing after you have installed a driver, and you should not have a problem with XP trying to remove an unsigned driver.
"...putting all your eggs in one basket along with your bowling ball and gym clothes only gets you scrambled eggs and an extra laundry day... " - Jeffry J. Brickley
|
|
|
|
|
Hi:
One of my friends PC was mysteriously showing this message while I observed some diagnostics on the same:
Driver not installed and an exclamation mark apperaed.
It is running Windows XP Professional.
Is there any drivers for USB Host Controller etc?
Deepak Kumar Vasudevan
Personal Web: http://vdeepakkumar.netfirms.com/
I Blog At: http://deepak.blogdrive.com/
|
|
|
|
|
Isn't the USB host controller driver a part of windows XP?
Don't try it, just do it!
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
