|
Hi,
yes you are right about the implementation.
But you can write a program and a class, with Copy contructor and operator= implemented , and write cout statements to trace program flow.
Its really a tricky behaviour,
Regards,
Mohammad
|
|
|
|
|
Well, you're right. And so is the book's author, if SomeFunction returns a value and not a reference.. Both the copy constructor and operator = will get called. How? SomeFunction returns a value and the compiler invokes the copy constructor to create a temporary object. It then calls operator = on a, passing the temporary object.
And yeah, you are right, inside the overloaded assignment operator, you need to check if you have a valid pointer and if you do, delete it before copying the contents. This is not needed in a copy constructor because it can be invoked only once, when the object is created.
You need to watch out for something called return value optimization though. If you write code like this,
<br />
Class a = SomeFunction();<br />
then the compiler is free to optimize away the call to the copy constructor and instead construct a directly in place. So the above code will result in only copy constructor call, instead of the two you expect (one for the returned temporary object, one for a).
Regards
Senthil
My Blog
|
|
|
|
|
If 'a' already exists and you wish to replace it with data from anouther object then you must free any memory that your object allocated before copying the data. But to be safe, you must first determine it you can make a copy of the data. Which means if an allocation is needed, then allocate the required memory. If the allocation fails then throw an exception (or return an error condition). If the allocation is successfull, then free the previous memory pointers and set them equal to the newly allocated memory pointers. The idea here is to leave the object ('a') in the same state that it was in before the copy was attempted.
There is a differnce between the following:
MyClass a = b; // 1st - object being initialised
a = c; // 2nd object data being replaced
In the 1st case the code calls the copy constructor MyClass::MyClass(const MyClass& argumentMyClass).
In the 2nd case it calls the operater MyClass::operater=(const MyClass argumentMyClass).
The 1st case is easy, but it must(/should) throw an exception if a memory allocation fails (because constuctors do not return a failed/success value).
The 2nd case is a little different, because 'a' alrady exist. We have to free any memory associated with it, before reassigning the data pointers.
Now here is the flaw in the sytstem, if you don't delete your current objects data pointers before allocating space for the new data then there may not be enough memory to make a copy (highly unlikely - but possible). If that is the case then you are running so low on memory that it does not matter (just throw an exception or return a major error value).
General Rule: Any time a function/routine fails, the state of the object/data should remain in the state that is was in before the failure.
 Sorry, I tend to get a little carried away. This is a fraction of what you may have to deal with, when it comes to copy constructors.
INTP
"The more help VB provides VB programmers, the more miserable your life as a C++ programmer becomes."
Andrew W. Troelsen
|
|
|
|
|
That clears it up for me.
|
|
|
|
|
Hi there
I´m working in a project that mixes managed and unmanaged code. While debuggin my unmanaged code that makes a call to a class that uses managed code I get a dialog box with this message: "There is no source code for the current location".
All the projects contained in the solution are seted to use managed extensions and the debug mode is seted to "mixed".
Any hint ou there to solve this problem?
Thanks in advance.
|
|
|
|
|
|
Thanks for the tip, but reading the msdn article
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vsdebug/html/vxtskLaunchingDebuggerAutomatically.asp[^] pointed in the greggm's blog, it makes reference to "desenv.exe" and I could not find desenv.exe in my system. I already installed "Debugging Tools for Windows" and still missing this file.
Like I told before, the project I'm working on is a C++ (native code) that call a dll that uses managed code and when I try to step into a function in this dll, the debugger stops and show me a message "There is no source code for the current location" along with a checkbox "Show disassembly automatically" and three buttons, OK, SHow Disassembly and help.
There is another utility that I coukd use to debug the managed code in the dll?
Thanks in advance
|
|
|
|
|
We have a CFormView based application. Within this application, some have created CDialog classes and so we have a mixture of window types. Some of our modal windows are CFormView based and some are CDialog based. The CDialog windows always have priority over the CFormView based windows. Even when I click on a window that is a CFormView, the title bar activates and the window is selected, but it cannot be brought to the front to display over the CDialog windows. Does anyone know what properties I have to enable or disable to change this behavior?
I need CFormView windows to display overtop of the other independent CDialog windows.
Best Regards,
Shawn D. Fox
|
|
|
|
|
I have a named pipe server, created using CreateNamedPipe(). Has anyone any idea how can I make it disallow remote clients (so only pipe clients on the same system as the server are allowed to connect to it) ?
Many thanks for any help.
Thanks,
Neil Humphreys.
|
|
|
|
|
I have an MFC application in which I need to perform a join operation of two tables Emp and Assets, with the EmpID field being the primary key. I did not use any AppWizard options to implement database connectivity functionality. Instead, I added two classes derived from CRecordset and two forms derived from CRecordview class to implement DBMS. I need to select all asets for a given EmpID in the Emp table and show the on a form. Is there a way to do this without using the m_strFilter variable/parameter stuff?
log live the dEvIL
|
|
|
|
|
I think you need to derive a class from CRecordset that has as its member variables all columns returned from the query. For example. given the following two tables:
Table1
=======
CustID
Name
Address
Phone
Table2
=======
OrderID
CustID
Total
the CRecordset-derived class would have a query that looked like:
SELECT Table1.Name, Table1.Address, Table1.Phone, Table2.Total
FROM Table1 INNER JOIN Table2 ON Table1.CustID = Table2.CustID
The class would need four member variables. Does this get you close?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Na, I am way too far. I did derive a class from CREcordset and linked it up to a table, I just need to set the filter. How do I do that?
long live the dEvIL
|
|
|
|
|
If you already have a CRecordset-derived class, and the subject of this thread indicates you want to implement a join, why not just change the value returned from the GetDefaultSQL() method? Using the m_strFilter member variable does not do the same thing as a join operation.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Hello
Can anybody explain to me why the following four bold lines of code yield different results to their counterparts on the line below? By my reckoning the results should be the same with the only difference being one set are printed to the console window and the other to a text file. The purple lines are definitely creating correct results because they are a product of help code for Microsoft Visual Studio .NET and the results look good. The red lines of code (my code) are definitely producing incorrect results and all four of the outputs are often identical. Am I doing some memory management incorrectly???
#include "stdafx.h"
#using
#include
#include
#include
using namespace System;
// This is the entry point for this application
int _tmain(void)
{
_int64 ctr1 = 0, ctr2 = 0, freq = 0;
int acc = 0, i = 0;
FILE *storage;
//Start timing the code
if(QueryPerformanceCounter((LARGE_INTEGER *)&ctr1) != 0)
{
storage = fopen("C:\\TestTimer.txt", "a"); //Open a file for data output
//Code segment is being timed
for(i=0; i<100; i++) acc++;
//Finish timing the code
QueryPerformanceCounter((LARGE_INTEGER *)&ctr2);
fprintf(storage, "Start Value %s\n", ctr1.ToString());Console::WriteLine("Start Value: {0}",ctr1.ToString());
fprintf(storage, "End Value %s\n", ctr2.ToString());
Console::WriteLine("End Value: {0}",ctr2.ToString());
QueryPerformanceFrequency((LARGE_INTEGER *)&freq);
fprintf(storage, "Frequency %s\n", freq.ToString());Console::WriteLine(S"QueryPerformanceCounter minimum resolution: 1/{0} seconds.",freq.ToString());
fprintf(storage, "Time %s\n", ((ctr2-ctr1) * 1.0 / freq).ToString()); Console::WriteLine("100 Increment time: {0} seconds.",((ctr2-ctr1) * 1.0 / freq).ToString());
fclose(storage);
}
return 0;
}
|
|
|
|
|
You're mixing CLR strings with C-style strings. fprintf() expects a const char* on the stack, to be inserted where the %s is, however what you're putting on the stack is a whole System::String object, which is totally not the same thing. You need to convert that object to a C-style string (with PtrToStringChars, for example).
--Mike--
LINKS~! Ericahist updated! | 1ClickPicGrabber | CP SearchBar v2.0.2 | C++ Forum FAQ
Strange things are afoot at the U+004B U+20DD
|
|
|
|
|
hello,
i'd like to have a progress control in each MDI document's frame, which holds a CScrollView. in particular, i'm interested in shortening the horizontal scrollbar in a CScrollView, and placing controls to the left of the scrollbar, something like the output view in MSVC 6, or like excel. i searched the articles for something like this, but couldn't find anything. does anyone have any suggestions regarding how to do this?
a simple (but, in my opinion, ugly) solution is to leave CScrollView alone, add a status bar to my CMDIChildWnd-derived frame class, and place the progress control in the status bar.
thanks,
ed
Edward H Herskovits
Noetic Systems Incorporated
www.noeticsystems.com
"When certainty is not enough."
|
|
|
|
|
You'll need to stop using the scrollbar that is part of the MDI Child window and use scrollbar controls instead. If you use MFC splitters in your MDI app then it will use scrollbar controls. You might want to have a look at that.
That said it seems strange to me to have porgress controls on the MDI windows. What is taking so long that you need a scroll bar at all, I have to wonder.
Neville Franks, Author of ED for Windows www.getsoft.com and Surfulater www.surfulater.com "Save what you Surf"
|
|
|
|
|
i've developed a user interface to some number-crunching code; the user may want to analyze several documents at once without the GUI freezing, so i converted the analysis code to run in separate worker threads. i wanted to indicate progress for each document separately, rather than in the main frame's status bar, so i thought about having a progress control associated with each document/MDIChildWnd.
thanks for the advice.
ed
Edward H Herskovits
Noetic Systems Incorporated
www.noeticsystems.com
"When certainty is not enough."
|
|
|
|
|
ehh wrote:
i've developed a user interface to some number-crunching code; the user may want to analyze several documents at once without the GUI freezing, so i converted the analysis code to run in separate worker threads. i wanted to indicate progress for each document separately, rather than in the main frame's status bar, so i thought about having a progress control associated with each document/MDIChildWnd.
Ok that makes sense now. Look at the MFC CSplitterWnd code and how it uses CScrollBar. It might be easier to switch to using CSplitterWnd the you'll get the scrollbar's you need. I don't know what would be involved in reducing there size though.
Neville Franks, Author of ED for Windows www.getsoft.com and Surfulater www.surfulater.com "Save what you Surf"
|
|
|
|
|
what about adding a progress control below the view in the MDIChildWnd frame? has that been done?
thanks for your advice; i'll check out CSplitterWnd....
ed
Edward H Herskovits
Noetic Systems Incorporated
www.noeticsystems.com
"When certainty is not enough."
|
|
|
|
|
ehh wrote:
what about adding a progress control below the view in the MDIChildWnd frame? has that been done?
thanks for your advice; i'll check out CSplitterWnd....
I think it would be quite difficult to do as the View window is closely bound to the MDI window. But with enough time anything is possible.
Just did a quick Google search for "CScrollbar MDI" and found:
http://www.codeproject.com/splitter/ruler.asp[^] which may be of interest.
Neville Franks, Author of ED for Windows www.getsoft.com and Surfulater www.surfulater.com "Save what you Surf"
|
|
|
|
|
PS. It might be easier to create a child window that sits in a corner of the mdi window and show the progress ctrl there.
Neville Franks, Author of ED for Windows www.getsoft.com and Surfulater www.surfulater.com "Save what you Surf"
|
|
|
|
|
Actualy it is not that simple ... because i'm trying to learn and i don't have "Help" nor "MSDN" nor friends that know Visual C++ ...
My problem is with a Check_box .. i'm used to using Delphi ... in this case i don't have Delphi .. i must use Visual Studio C++ ... So I've banged my head in this small problem ...
I whant something like this ... when I click the Check_Box, a Edit_Box that was disabled, to be enabled ... this is what i've come up with :
<b> <code>int checkState;
CButton* pCheck = (CButton*)GetDlgItem(Check_Eagle);
if (pCheck->GetCheck() == 0) {
pCheck->SetCheck(1);}
else pCheck->SetCheck(0);
</code> </b> 
When i hit a Button i whant to do the check ... if GetCheck = 1 then Edit_Eagle = Enabled ... and to enter a value in the same time ... :->:-> ...
can anyone help ?
iarta, iubeste, zimbese, exprima-te, relaxeaza-te, ajuta un batrin, accepta un compliment, ascula-ti prieteii, reia un proiect abandonat, fii intelegator cu tine si cu altii, uita-te la un album cu fotografii, picteaza un tablou, asculta tacerea, aminteste-ti intotdeauna ca nu esti singur, spune-le celor ragi cit de mult ii iubesti, imagineaza-ti ca astazi nu ai nici o grija, joaca-te cu un copil, citeste o carte buna, alege-ti o stea de pe cer, fii copil inca o data, suna-ti prietenii cu care n-ai vorbit de mult, da-ti voie sa mai si gresesti, lasai pe altii sa te ajute, renunta la ce u iti place, indeplineste-ti promisiunile, inchide ochii si imagineaza-ti ca esti pe o plaja tropicala, priveste atent o floare, cumpara-ti ceva ce iti doresti de mult, spera ca ceea ce iti doresti se va indeplini, ajuta-i pe altii, respira profund, fa-ti un cadou, iubeste !!!
|
|
|
|
|
assasin_shark wrote:
i don't have "Help" nor "MSDN"...
Actually you do. Check out http://msdn.microsoft.com[^].
When calling GetCheck() and SetCheck(), use BST_UNCHECKED and BST_CHECKED instead of 0 and 1. It has nothing to do with your problem, but it does make the code more readable.
assasin_shark wrote:
CButton* pCheck = (CButton*)GetDlgItem(Check_Eagle);
The value passed to GetDlgItem() should be the ID of the checkbox control. Is that what Check_Eagle is, or is it a (int) variable?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
<small><b>DavidCrow wrote:</b></small>
<i>Actually you do. Check out http://msdn.microsoft.com.</i>
Actualy i was there .. but .. realy .. i didn't find what i was locking for ...
<small><b>DavidCrow wrote:</b></small>
<i>When calling GetCheck() and SetCheck(), use BST_UNCHECKED and BST_CHECKED instead of 0 and 1.</i>
u mean <code>SetCheck(BST_CHECKED)</code> ?
<small><b>DavidCrow wrote:</b></small>
<i>Is that what Check_Eagle is, or is it a (int) variable? </i>
<code>Check_Eagle</code> is the name or ID of the Check_box, yes ... 
iarta, iubeste, zimbese, exprima-te, relaxeaza-te, ajuta un batrin, accepta un compliment, ascula-ti prieteii, reia un proiect abandonat, fii intelegator cu tine si cu altii, uita-te la un album cu fotografii, picteaza un tablou, asculta tacerea, aminteste-ti intotdeauna ca nu esti singur, spune-le celor ragi cit de mult ii iubesti, imagineaza-ti ca astazi nu ai nici o grija, joaca-te cu un copil, citeste o carte buna, alege-ti o stea de pe cer, fii copil inca o data, suna-ti prietenii cu care n-ai vorbit de mult, da-ti voie sa mai si gresesti, lasai pe altii sa te ajute, renunta la ce u iti place, indeplineste-ti promisiunile, inchide ochii si imagineaza-ti ca esti pe o plaja tropicala, priveste atent o floare, cumpara-ti ceva ce iti doresti de mult, spera ca ceea ce iti doresti se va indeplini, ajuta-i pe altii, respira profund, fa-ti un cadou, iubeste !!!
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
