Click here to Skip to main content
15,846,211 members
Articles / Desktop Programming / Windows Forms

Evaluation Engine

Rate me:
Please Sign up or sign in to vote.
4.96/5 (164 votes)
1 Jun 2008CC (ASA 2.5)29 min read 294.9K   5K   376   101
The Evaluation Engine is a parser and interpreter that can be used to build a Business Rules Engine. It allows for mathematical and boolean expressions, operand functions, variables, variable assignment, comments, and short-circuit evaluation. A syntax editor is also included.

Evaluation Engine Overview

I am in the process of creating a Rules Engine. I have architected the Rules Engine to allow the rules to be "pre-compiled" or "dynamic". The "pre-compiled" rules are simply rules that are programmed in a .Net language and invoked by the Rules Engine using reflection. The "dynamic" rules are interpreted at execution time by the Rules Engine. The "dynamic" rules offer great flexibility because they can be changed very easily.

This article is not about the Rules Engine; it is about the parser/interpreter that is built into the Rules Engine that evaluates the dynamic rules. This piece of the code that evaluates the dynamic rules is called the Evaluation Engine. Included in the download is the Evaluation Engine source code and test application. The main test application (called the Rules Calculator) allows you to enter in the rule syntax, parse the syntax, and evaluation the results.

Evaluation Engine

Before going into too much detail on how the Evaluation Engine works, I thought it would be better to show you what it does. After you see what the Evaluation Engine can do, I will explain how it works. As I mentioned previously, the test application that is included is called the Rules Calculator. The Rules Calculator is simply a "wrapper" around the Evaluation Engine. The Rules Calculator allows you to type in Rules Syntax (for lack of a better name, I'll call the syntax "Rules Basic"). Next, the Rules Calculator passes the Rules Basic syntax to the Evaluation Engine for evaluation.

Parsing and Tokens

The job of the Evaluation Engine is to take the Rules Basic string (or .Rule file), evaluate the contents and perform the action. Most compilers and interpreters go through a process called parsing. The parsing process needs to look at the Rules Basic string and pull out the important pieces of information. The important pieces of information the parser identifies are called "tokens". Each token gets identified as a certain type of token (or classification). Each token is classified as one of the following:


An operand is a value or a variable in the Rules Basic syntax. For example, in the mathematic equation "1 + 2 = 3", the items 1, 2, and 3 are operands. Similarly, in the equation "a + -b >= c" the operands are a, b, and c. Obviously, there is a difference between the operands 1, 2, 3 and a, b, c. That is, the first set of operands are Integer values and the second set are variables. The point is that the operand tokens can be further classified by types. The Evaluation Engine classifies the Operand Tokens as one of the following:

  • Token_DataType_Variable: The operand token is a variable.
  • Token_DataType_Int: The operand token is an integer/whole number.
  • Token_DataType_Date: The operand token is a date.
  • Token_DataType_Double: The operand token is numeric/double.
  • Token_DataType_String: The operand token is text.
  • Token_DataType_Boolean: The operand token is true or false.
  • Token_DataType_NULL: The operand token is null.


The Rules Basic syntax allows for function on operands. This token indicates that the parser has found the start of an operand function. All operand functions in the Rules Basic syntax utilize square brackets. For example, Avg[], Year[], Join[] are 3 examples of operand functions that are available in Rules Basic. Operand functions can take operands are parameters. The Evaluation Engine does some data type checking. For example, Year[5.20.1999] operand function required an operand token of type Token_DataType_Date (notice that the date delimiter is "."). The same operand function with the wrong data type operand will throw an error, i.e., Year["Hello"] will cause an error.


The Evaluation Engine follows the mathematical order of operations. This order of operations can be changed by using parenthesis. This token indicates that the Evaluation Engine found an open parenthesis: (


The Evaluation Engine has found a close parenthesis.


The Rules Basic syntax allows for operand function. The parameters for operand functions are identified in square brackets. This token indicates that the Evaluation Engine found the end of an Operand Function.


Operand functions can take multiple parameters. The parameters in an operand functions are separated by commas. This token indicates that the Evaluation Engine has found a comma in a Operand Function


Operators are applied to operands. For example, when the "+" operator is applied to the operands 1 and 1, the result is 2. This token indicates that the Evaluation Engine has found an operator.


The Rules Basic syntax allows for assignment of variables. Variables can be assigned static values (such as "Hello") or they can be assigned Rules Basic syntax (such as "1 + 1"). The assigned variables can also participate in other Rules Basic syntax. The assignment operator is := Examples of assignments are seen in the examples below. Therefore, when the Evaluation Engine encounters a := in the Rules Basic string, a Token_Assignemt_Start gets created in the collection of tokens.


The semicolon (;) indicates the end of an assignment in Rules Basic syntax. When the Evaluation Engine detects ; a Token_Assignment_Stop token gets created.

One more important piece of information: When the Evaluation Engine parses the Rules Basic string, every token gets assigned a token type and a token data type. For example, the token "Hello" will get assigned the Token Type = Token_Operand and the Token Data Type = Token_DataType_String. If you forget to the double quotes around the string "Hello", the parser will classify Hello as a Token_Operand and data type Token_DataType_Variable. Since every token gets classified with a token type and token data type, how does the parser classify the data type of a = token, or a + token, or a ( token? The token + gets classified as token type Token_Operator and data type Token_DataType_None. I did not mention the "None" data type in the tables above because I wanted to provide this example first. Therefore, the operand tokens can be classifies as Integer, Date, Double, String, Boolean, Null, Variable or None.

Let's work through an example of parsing and tokens. We will keep the Rules Basic syntax simple: (1 + 3) * Avg[3,4,2+3]

Here are the tokens that get identified in the above example:


Token Type

Token Data Type














































After the Evaluation Engine identifies and classifies all the tokens in the Rules Basic syntax, the tokens are arranged in a certain order (more on this later) to make the evaluation easier.


Time for some examples. I'll start with simple examples and then introduce some more complex examples:


This is a simple example that shows you the Rules Calculator test application. The Rules Calculator allows you to create multiple tabs to run multiple expressions. I did this so that you can break down a large complicated expression into smaller expressions and evaluate the smaller expressions in their own tabs.

The Rules Basic syntax allows you to perform mathematical calculations. It allows you to do order of operations. The valid mathematical operators are:



Exponents: 5 ^ 2 = 25


Multiplication: 5 * 5 = 25


Division: 25 / 5 = 5


Modulus/Remainder: 10 % 3 = 1


Addition: 5 + 5 = 10


Subtraction: 10 - 5 = 5. The - symbol is also used to represent negative numbers. For example 1+-1=0

Of course, the Rules Basic syntax also allows for logical and Boolean operators:


Less than


Less than or equal to


Greater than


Greater than or equal to


Equal to


Not equal to


Logical and


Logical or

The Evaluation Engine allows you to perform mathematical calculations, string manipulations, date calculations, and Boolean logical. Operand functions can be embedded within Operand functions (within operand functions....). Mathematical expressions (with order of operation) can be embedded within operand functions. In the example below, notice that mathematical expression is embedded within operand functions which are embedded in other operand function and compared against the integer value 2000:


Here's another simple example using variables. After you parse the Rules Basic syntax, the Rules Calculator realizes that the expression contains variables, therefore, it automatically brings you to the variables table. You can set the value of a variable by double clicking on the variable in the list view and setting its value. After all the variables are set, you can click on the results tab and execute a "Single Evaluation". Note that you can change the values of the variables at any time and re-evaluate the result. However, anytime you change the syntax, you need to click on the "Parse" button in the main toolbar:


The evaluation engine allows you to add as much "white-space" as you need. That is, you can add tab characters and new lines; these will be ignored by the parser. Also, the Evaluation Engine supports comments. Comments are placed between ~ (tildas) and will be ignored. Note that comments can span multiple lines. Here's an example that uses assignments. Notice that the assignment operator is := and that each assignment must end with a ; (semicolon). The Rules Basic syntax dictates that the assignment declarations are made first, followed by the final expression that is evaluated. Note that the final expression that is evaluated can use any of the assigned variables. Also, assigned variables can use any previously declared assigned variables. Anything can be assigned to variables, including dates, string, numbers, Boolean, expressions, operand functions other variables, .... Here's a simple example (please read through the comments in the image for more details):


Before I continue with a final example that is more realistic, let me give you the list of operand function that I programmed in the Evaluation Engine. If you need to add your own custom operand's very simple but it is a code change to the Evaluation Engine. I thought long and hard if I should make the operand function external to the Evaluation Engine so that new operand functions could be added easily. The coding of the parser and evaluator was complicated enough so I decided to program the operand function as internal methods in the Evaluation Engine. Also, I wanted the Evaluation Engine to be as fast as I could make it so I thought that internal operand functions would be faster than having the Evaluation Engine invoke methods in external assemblies using reflection. Here's the list. The "Function" toolbar button also displays this list in the Rules Calculator:

Operand Function




avg[p1, ..., pn] where p1,...,pn can be converted to doubles.

Calculates the average of a list of numbers. The list items must be able to convert to doubles.

Absolute Value

abs[p1] where p1 can be converted to a double.

Calculates the absolute value of a numeric parameter.


iif[c, a, b] where c is the condition and must evaluate to a Boolean. The value a is returned if c is true, otherwise, the value b is returned.

Performs an if-else-end

Lower Case


Converts a string to lower case


left[s, n] where s is the string and n is the number of characters

Returns the left number of characters from a string parameter.


len[a] where a is a string variable

Returns the length of a string


mid[p1, ..., pn] where p1, ..., pn are numeric values

Calculates the median for a list of numbers


right[s, n] where s is the string and n is the number of characters.

Returns the right number of characters from a string parameter


round[n, d] where n is the numeric value to be rounded, and d is the number of decimal places.

Rounds a numeric value to the number of decimal places

Square Root

sqrt[a] where a is a numeric parameter

Calculates the square root of a number.

Upper Case


Converts a string to upper case

Is Null or Empty


Indicates is the parameter is null or empty.

Is True or Null


Indicates if the parameter has the value true or is null;

Is False or Null


Indicates if the parameter has the value false or is null



Trims the spaces from the entire string

Right Trim


Trims the spaces from the right of a string

Left Trim


Trims the spaces from the left of a string

Date Add

dateadd[date, "type", amount] where date is a valid date, and type is "y", "m", "d" or "b" (representing year, month, day, or business days) and amount is an integer

Adds an amount to a date. Please note that the amount may be negative.


concat[p1, ..., pn]

This operand function concatenates the parameters together to make a string.


date[m, d, y] where m is an integer and is the month, d is an integer and is the day, and y is an integer and is the year

Create a new date data type

Right Pad

rpad[a, b, n] where a and b are string values and n is numeric. The parameter p will be appended to the right of parameter a, n times.

Pads a string on the right with new values

Left Pad

lpad[a, b, n] where a and b are string values and n is numeric. The parameter p will be appended to the left of parameter a, n times.

Pads a string on the left with new values


join[a, b1, ..., bn] where a is the delimiter and b1, ..., bn are the items to be joined.

Joins a list of items together using a delimiter

Search String

SearchString[a, n, b] where a is the string that is being searched, b is the string that is being sought, and n is the start position in a

Searches for a string within another string at a specified starting position


day[d1] where d1 is a date value

Returns the day of a date


month[d1] where d1 is a date value

Returns the month of a date


year[d1] where d1 is a date

Returns the year of a date

Sub String

SubString[s, a, b] where s is the string, a is the starting point, and b is the number of characters extracted.

Extracts a substring from a string

Numeric Max

NumericMax[p1, ..., pn]

Finds the maximum numeric value in a list

Numeric Min

NumericMin[p1, ..., pn]

Finds the numeric minimum value in a list

Date Max

datemax[d1, ..., dn] where d1, ..., dn are dates

Returns the maximum date in the list

Date Min

datemin[d1, ..., dn] where d1, ..., dn are dates.

Returns the minimum date in the list.

String Max

StringMax[p1, ..., pn]

Finds the maximum string in the list

String Min

StringMin[p1, ..., pn]

Finds the minimum string in the list


contains[p1, p2, ...., pn] If p1 is in the list p2, ..., pn, this function returns "true" otherwise, this function returns "false".

Indicates if the item is contained in the list.


between[var, val1, val2] where var, val1, and val2 are integers. if var >= val1 and var <= val2 then the function returns "true", otherwise, the function return "false".

Indicates if a value is between the other values. Please note that the comparison is inclusive.

Index Of

indexof[a, b1, ..., bn] If the list b1, ..., bn contains the value a, the index of the value is returned, otherwise, -1 is returned. Please note that this is zero based indexing

Returns the index of a list item.


now[] This operand function takes no parameters

Returns the current date


Replace[a, b, c] where a is the search string, b is the value being replaced, and c is the value that is being inserted

Replaces one string with another string


eval[r] where r is any valid Rule Basic string rule

Evaluates a Rule Basic string. I think this is an interesting operand function. In my Rules Engine, I may have rules that return a Rules Basic string. Then the result could be evaluated with this operand function. That is, have rules that create other rules. Example: eval[concat["a:=5;", "b:=6;", "a+b"]]


remove[a, b] where a and b are string

Removes the specified characters from the string

Double Quote


Returns a double quote

Proper Case

pcase[a] where a is a string

Converts a string to Proper Case. For example, the proper case of "buFFalo" "Buffalo"

Sin Wave


Calculates the sin of a number

Boolean Not


Performs a boolean Not operator on the parameter a. For example, Not[true] = false.

Is all digits


Returns true/false indicating if the parameter is all digits. For example, IsAllDigits["1234"] = true

Here's a slightly more realistic example of a rule that may be used by an insurance company to calculate the monthly payment of a life insurance policy. Here are the business rules for this life insurance policy:

  • To qualify for this product, a "scoring" system is used. A customer attempting to qualify for this product is assigned an initial score of 100.
  • If the customer is over 50 years of age, they loose 10 points. If the customer is over 70 years of age, they loose 40 points
  • If the customer is a smoker, they loose 45.6 points
  • If the customer's weight is more than 180 pounds, they loose 10 points. If the custom weighs more than 250 points, they loose 40 points
  • The customer's final score is subtracted from 105.65. This amount is then multiplied by $5.25 to get the final payment.

The Rules Basic syntax for the above logic is saved in the file "InsPolicyA.rule". You can open this file in the Rules Calculator, set the values for the age, smoker, and weight and run the by clicking on the "Single Evaluate" button in the result tab. The final payment is calculate and returned as a string, such as "Monthly Payment = $374.00 (USD)".

Rules Engines are very powerful. In the above example, we have a complicated rule to calculate a customer's monthly payment for a product. A real insurance company probably has hundreds of products that all have special business rules. A financial institution, may have hundreds of products a customer can qualify for. A shipping company may have a set of business rules that dictate when items get shipped or re-ordered. If business rules are housed in a central location, administration of the rules becomes easier. If a rule changes, there is only one location to change the rules instead of all the client applications that embedded the rules in their logic. Also, if the Rules Engine is running on a Rules Server, there are additional benefits to be gained such as scalability, fault tolerance, and performs gains.

Client Application

Creating a client application to consume the Evaluation Engine is a simple process. There are only 2 objects involved:

  • EvaluationEngine.Parser.Token object. This object will allow you to open a saved .Rule file (or pass in a Rules Basic string) and set the values of the variables.
  • EvaluationEngine.Evaluate.Evaluator object: This object takes the token object as a parameter in the constructor. The Evaluate() method does all the work to evaluate the tokens.

In the above insurance example, how could we evaluate that rule using a custom designed client? Here's a small console application that will load the rule, set the values for the variables and return the results:

// create the token object from the .Rule file
EvaluationEngine.Parser.Token token = new EvaluationEngine.Parser.Token(
     new System.IO.FileInfo("InsPolicyA.rule"));

// set the values for the variables
token.Variables["Age"].VariableValue = "38";
token.Variables["Smoker"].VariableValue = "false";
token.Variables["Weight"].VariableValue = "175";

// create the evaluator object and pass in the token object in the constructor
EvaluationEngine.Evaluate.Evaluator eval = 
    new EvaluationEngine.Evaluate.Evaluator(token);

// run the evaluation
string ErrorMsg = "";
string result = "";
if (eval.Evaluate(out result, out ErrorMsg) == true)

The download files contain a sample client console application. Here's a screen shot from that application:


Rule Groups

Assume that you create some rules with the Rules Calculator and you save the rules into .Rule files. Some of the variables that you have defined can be found in multiple rules. For example, consider the Insurance company again. We created a rule to see if a customer qualifies for a life insurance policy and that rules takes 3 parameters: age, smoker, and weight. The insurance company could also have another rule that provides rate quotes for car insurance. This car insurance rate quote rule could take 3 parameters: age, smoker, and gender. Therefore, amoung the 2 rules (Life Insurance Policy and Car Insurance) there are 4 parameters: age, smoker, weight, and gender. If we have these 4 parameters for a customer, it would be nice to run both rules. That's were the EvaluationEngine.Parser.TokenGroup object is used.

The Rules Calculator provides an implementation of the TokenGroup object. To add a new rule group in the Rules Calculator test application, click on the "Rule Group" in the drop down menu item:


This will create a new tab and load the Rule Group interface.

You cannot create a new rule in the Rule Group interface; You can only open saved .Rule files. Click on the "Open" toolbar button and open multiple .Rule files. After you have the Rules open, set the values for the variables by double clicking on the variables and setting their values. Finally, click on the "Parse" button in the main toolbar to execute all the rules. The results of the individual rules are displayed in the "Results" column of the List View.


How does it work?

If you look at the source code, you will notice that I put a lot of comments in the code. The Evaluation Engine code has two major pieces: Parser and Evaluator. The Parser scans the Rules Basic syntax and creates the token collection. It then sorts the token collection in Reverse Polish Notation order. Finally, the sorted token collection is passed to the Evaluator object. I will describe each of these processes in detail.

The Parser

The parsing code is in the GetTokens() method of the Token object. This method starts a Do loop and begins extracting a character at a time from the RulesBasic syntax string. Each character is concatenated to a local string variable called "currentToken". Then the currentToken variable is analyzed and, depending on the analysis, a TokenItem object is created.

At any point in time, the parser knows exactly what it is looking for. For example, if the parser encounters a ~ character, it knows that it is starting a comment. Therefore, the parser knows that is can throw away (or dispose of) all of the characters it finds until the next ~ (closing comment indicator) is found. The parser manages its current state by using an enumeration (and a local variable) called ParseState. The parser only has to manage 5 states:




This state indicates that the parser is looking for an operand. Remember, the operand can be a variable, integer, string, Boolean, date, double, or null. This is the default value of the parse state; that is, the first thing the parser looks for when starting is an operand.


This indicates that the parser is looking for an operator. The operators can be mathematical, logical, or Boolean operators.


This indicates that the parser is looking for a double quote. Typically, when the closing quote is found a TokenItem object is created and set to data type string.


This indicates that the parser has found a valid operand function and is parsing the parameters of the operand function. You will notice in the code that multiple parse states are maintained. For example, the current parse state indicates that we are parsing an operand function. However, a separate parse state is maintained to parser the parameters of the operand function. A separate parse state is needed for the parameters because the parameters to a operand function can also be valid expressions.


This parse state indicates that we are in a comment. Any characters that are encountered while in "comment-mode" are ignored. The parser is scanning the characters and looking for the ending comment indicator.

Now, with the help of parse state, the parser knows what it is looking for. For example, if the parser is looking for an operand and it encounters a "+" character (that is, it is looking for an operand and it finds an operator character), there may be a problem with the syntax since "+" characters are not allowed in operands. The point is that the parser knows what it is looking for and, of equal importance, it knows what it is looking for next. That is, if the parser is looking for an operand, then it knows that it will be looking for an operator next (or the end of the Rules Basic syntax).

There's a lot of code in the GetTokens() method so it's hard to detail it all in this article (I put a lot of comments in the code to help you understand what the parser is doing). After the parser extracts a character, you will see some nested switch statements and switch statements with log if-elseif statements. This is how I programmed the parser to know what it is currently looking for and what it is looking for next. Here's some code from GetTokens() with some detail around the space and comma handling. Notice that the switch statement looks at the current parse state. In the code sample below, if we are looking for a operand and we find a space, a token is created and the next parse state is set to look for a operator. Similarly, if we are looking for an operand and we find a comma and error is returned.

switch (parseState)
  case ParseState.Parse_State_Operand:
    #region Parse_State_Operand
    if (c == '"')
    else if (c == ' ')
      #region Space Handling
        // we are looking for an operand and we found a space.  
        // We are not currently looking for a closing quote.
        // Assume that the space indicates that the operand is completed 
        // and we now need to look for an operator                            
        tokenCreated = CreateTokenItem(currentToken, false, false, 
            out tempParseState, out isError, out lastErrorMessage);
        if (isError) return;

        if (tokenCreated == true)
          // set the next parse state
          parseState = tempParseState;

          // reset the token
          currentToken = "";
      catch (Exception err)
        lastErrorMessage = "Error in GetTokens() in 
            Operand Space Handling: " + err.Message;

    else if (c == '(')
    else if (c == ')')
    else if (c == '[')
    else if (c == ']')
    else if (c == ',')
      // we should never be looking for an operand and find a , (comma)
      lastErrorMessage = "Error in Rule Syntax: 
           Found a , (comma) while looking for an operand.";
    else if (c == '-')
    else if (c == ':')
    else if (c == ';')
  case ParseState.Parse_State_OperandFunction:
    #region Parse_State_Operand
  case ParseState.Parse_State_Operator:                                                
    #region Parse_State_Operand

  case ParseState.Parse_State_Quote:
    #region Parse_State_Operand

Creating operand tokens is a little more difficult then finding a space character and creating a operand token such as the case with this syntax: "1 + 1". It's more difficult because spaces are not required in the Rules Basic syntax. That is, "1+1" is a valid expression that does not contain any spaces. In this scenario, every time a character is appended to the string currentToken, the parser checks if the currentToken string variable contains an operator at the end. For example, when currentToken = "1+" the CreateTokenItem() method will find that the currentToken string ends with an operator. Furthermore, the CreateTokenItem() gets a little more complicated because it needs to "peek ahead". To understand what I mean, consider this example: "1>=2". Both the ">" and ">=" are valid operators. So, when the currentToken string variable is currently "1>", the CreateTokenItem() method needs to wait for the next character (the =) before the operand and operators are created. Take a look at the CreateTokenItem() to see how this is accomplished.

Sorting and Evaluating the Tokens

It's really easy for a human to look at the math expression "1 + 2 * 3" and know that the answer is 7 (using order of operations). It's difficult for a computer to evaluate this same expression. The computer needs to re-arrange the items/tokens in the expression so that it's easier to evaluate. In fact, the computer algorithm should re-arrange the expression so that it reads "2 3 * 1 +". This tells the computer that 2 and 3 need to be multiplied first and then 1 needs to be added to the result. The human notation "1 + 2 * 3" is known as Infix notation and the sorted computer notation "2 3 * 1 +" is known as Reverse Polish Notation (RPN). A computer can easily evaluate RPN simply by pushing and popping items from a Stack Abstract Data Type. Here's the simple algorithm for evaluation RPN:

  1. For each item in the RPN statement:
    • If the item/token is a number, push it on the stack
    • If the item/token is an operator, pop two items from the stack and perform the operations. Push the result of the operation back onto the stack.
  2. After all the items/tokens from the RPN statement have been evaluated, the stack should have 1 item which is the final answer.

In our simple example, "2 3 * 1 +", the 2 and 3 would be pushed to the stack. Then the 2 and 3 would be popped from the stack and multiplied. The result 6 would be pushed back on the stack. Next, 1 would be pushed on the stack. Final, 6 and 1 would be popped off the stack, then added together, and 7 would be pushed back on the stack. That is our final answer.

Obviously, this is a huge over simplification. The Evaluation Engine has to deal with operand functions, order of operations, variables, variable assignment, and so on. Fortunately, there is a famous computer scientist that invented an algorithm to convert from Infix notation to Reverse Polish Notation. This algorithm is called the Dijkstra Shunting Yard algorithm. More information about the algorithm can be found on Wikipedia at My implementation of the Shunting Yard algorithm can be found in the Token.MakeRPNQueue() method. The Rules Calculator displays the RPN for each expression in the "RPN Tokens" tab. For example, the RPN for (1 + 2) * 3 is


Notice that the parenthesis for (1 + 2) * 3 disappear in the RPN list. That's because the RPN sort the tokens in such a way that parenthesis are no longer needed. The order of operations in an RPN stack is accomplished by the sort order. Again, please review the Token.MakeRPNQueue() method if you want details on the sorting algorithm.

Adding Additional Operand Functions

In the last part of this article, I would like to go through the exercise of adding a new Operand Function to the Evaluation Engine. Let’s add the trigonometry function Cosine to the Evaluation Engine. The Cosine Operand function will take 1 numeric parameter. Here's the steps involved to add the new Operand Function:

  1. Add the name of the operand function in the OperandFunctions string array in the DataTypeCheck object:
    public static string[] OperandFunctions = { ..., "cos" };
  2. Add a "case:" condition in the switch statment in the Evaluator.EvaluateOperandFunction() method:
    case "cos[":
        success = Cos(Parameters, out Result, out ErrorMsg);
      catch (Exception err)
        ErrorMsg = "Failed to evaluate the operand function " + 
         OperandFunction.TokenName.Trim().ToLower() + 
         ": " + err.Message;
        success = false;
  3. Program the Evaluator.Cos() method:
    private bool Cos(Parser.TokenItems Parameters, out Parser.TokenItem Result, out string ErrorMsg)
        // initialize the outgoing variables
        ErrorMsg = "";
        Result = null;
        // make sure we have at least 1 parameter
        if (Parameters.Count != 1)
            ErrorMsg = "Error in operand function Cos[]: 
              Operand Function requires 1 parameter.";
            return false;
        // we can only take a Cos of an item that can be converted to a double
        if (Support.DataTypeCheck.IsDouble(Parameters[0].TokenName) == true)
            double temp = Parameters[0].TokenName_Double;
            double cos_temp = Math.Cos(temp);
            Result = new Parser.TokenItem(cos_temp.ToString(),
            ErrorMsg = "Error in operand function Cos[]: Operand Function 
             can only evaluate parameters that can be converted to 
             a double.";
            return false;
        return true;
  4. If you want to provide help on the new Cos[] Operand function add a new "case:" condition in the switch statement in the DataTypeCheck.FunctionDescription() method:
    case "cos":
      Description = "Calculates the cosine of a number.";
      Syntax = "cos[p1] where p1 can be converted to doubles.";
      Example = "cos[90] < 0";

That's all there is to it; you can now call the cos[] Operand Function in your Rules Basic syntax. If you add any Operand Functions to the Evaluation Engine, I would request that you post the Operand Function code and the description code to this article on Code Project and I will include the Operand Function in the original source.

Short-Circuit Evaluation

Many of the business rules that I write are in the form of "if-else" statements. For example, if a customer has a certain attribute, they get a certain score. If a driver has certain driving violations, their premium goes up by X%. If a medical claim is in a certain state/condition, then delay the payment. Since many of the rules are of this "if-else" type, I have tried to optimize the iif[] operand function. Recall that the iif[] operand function takes 3 parameters: iif[c, a, b]. If the condition c evaluates to true, the result is a, otherwise, the result is b.

The formal definition of short-circuit evaluation (taken from Wikipedia) is "denotes the semantics of some boolean operators in some programming languages in which the second argument is only executed or evaluated if the first argument does not suffice to determine the value of the expression". This is nothing new to us, we have been using short-circuiting for years...take a look at the msdn help for || and see that it states: "The conditional-OR operator (||) performs a logical-OR of its bool operands, but only evaluates its second operand if necessary"

Here's how short-circuiting works in the Evaluation Engine:

  1. When the parser scans the RulesBasic syntax, it finds all of the iif[] operand functions that do not contain other iif[] operand functions. The parser then sets the following property: tokenItem.CanShortCircuit = true;
  2. When the sorting algorithm places the tokens in RPN order, the tokens that are parameters to a short-circuited iif[] operand function are placed in their own RPN stack (if fact, the tokens are placed in 3 RPN stacks representing the condition parameter, the true parameter, and the false parameter).
  3. When the evaluator object is evaluating the tokens, the object knows which operand functions are short-circuited because of the new tokenItem.CanShortCircuit property. When the evaluator object encounters one of these short-circuit tokens, it knows to go to the condition RPN stack instead of the general RPN stack. If the condition RPN stack evaluates to true, then the True RPN stack is evaluated, otherwise the False RPN stack is evaluated. Since this is a complicated process, I created a ShortCircuit class that encapsulates all of the above logic.

The most important syntax to remember to take advantage of short-circuiting in the Evaluation Engine is do not nest the iif[] operand functions. If you do nest the iif[] functions, only the inner-most iif[] operand function will short-circuit. Instead of nesting the iif[] statements, break them into single statements and assign their result to a variable.

Here's a simple example:

score := iif[10<5, (2 + 3) * 8 + (2 ^ 4) / 6, 1];

In the above example, the condition "10<5" will evaluate to false and the interpreter will immediately jump to the last parameter and return 1. That is, the true expression (2 + 3) * 8 + (2 ^ 4) / 6 will never be evaluated, thus saving you time.

I've noticed that many mathematical evaluators that include support for "if-else" functions will evaluate all the parameters before they perform the "if-else" statement. This causes problems with certain "if-else" statements such as:

iif[x = 0, 0, 100 / x], where x is an integer variable.

In the above example, if the evaluator does not support short-circuiting and the variable x is set to 0, many evaluators will return a "division by zero" error even though the "100 / x" does not need to be evaluated. Fortunately, the short-circuiting in the Evaluation Engine prevents us from having this problem.



I'm sure there are many reasons why a developer releases his/her source code. My motivation for releasing this code is to solicit your feedback. The Evaluation Engine is an important part of a larger project that I am working on: the Rules Engine and Rules Server. If there is an error/bug in the Evaluation Engine, that error will "trickle" up to the other components that rely on the Evaluation Engine. If you like this library, please tell me. More importantly, If you don't like it, please let me know (I am open to constructive criticism). If you find a bug or have a suggestion, I would like that information too (I may make the change and re-release the code).

Thank You

The Rules Calculator application uses the control from the article Enabling syntax highlighting in a RichTextBox. Thank you Patrik.


May 23, 2008Version 1 of the Evaluation Engine published on Code Project.
June 1, 2008
  • Added a not[a] operand function
  • Added IsAllDigits[a] operand function
  • Added short-circuiting logic


This article, along with any associated source code and files, is licensed under The Creative Commons Attribution-ShareAlike 2.5 License

Written By
Software Developer (Senior)
United States United States

Comments and Discussions

GeneralGreat stuff! Pin
kryzchek28-May-08 7:10
kryzchek28-May-08 7:10 
GeneralRe: Great stuff! Pin
DonSn28-May-08 7:44
DonSn28-May-08 7:44 
GeneralRe: Great stuff! Pin
kryzchek28-May-08 7:49
kryzchek28-May-08 7:49 
GeneralRe: Great stuff! Pin
DonSn28-May-08 7:49
DonSn28-May-08 7:49 
QuestionCan you use IronPython? Pin
Zagnar28-May-08 4:54
Zagnar28-May-08 4:54 
AnswerRe: Can you use IronPython? Pin
DonSn28-May-08 17:57
DonSn28-May-08 17:57 
AnswerRe: Can you use IronPython? Pin
TheHologram3-Jun-08 11:05
TheHologram3-Jun-08 11:05 
GeneralF# and Rule Engine Pin
jpbochi27-May-08 6:53
professionaljpbochi27-May-08 6:53 

I was looking for something similar to the Rule engine you've described and I realized I needed to create a Evaluation engine too. Then I found F#[^].

Using its built-in FSharpCodeProvider, it's possible to parse and execute F# code at run-time. Also, you can create assembly files (as light as 4KB) if you don't want to recompile the code every time.

One advantage is that you don't need make a parser of your own. Also, F# is much more flexible and complex than the functional language that you've invented (nothing against it!). Of course, its complexity open the possibility of code injection.

Congratulations for your code, by the way. It's very well put together. Can you share the code of the Rule engine? I wonder what would be the effort to include a F# option in it.

GeneralRe: F# and Rule Engine Pin
DonSn27-May-08 7:02
DonSn27-May-08 7:02 
GeneralRe: F# and Rule Engine Pin
jpbochi27-May-08 7:06
professionaljpbochi27-May-08 7:06 
GeneralExcellent, but watch out for the variable datatypes and arrays Pin
simonmcanulty27-May-08 0:43
simonmcanulty27-May-08 0:43 
GeneralRe: Excellent, but watch out for the variable datatypes and arrays Pin
DonSn27-May-08 6:15
DonSn27-May-08 6:15 
QuestionA few questions Pin
Dustin Metzgar26-May-08 19:30
Dustin Metzgar26-May-08 19:30 
AnswerRe: A few questions Pin
DonSn27-May-08 7:20
DonSn27-May-08 7:20 
GeneralRe: A few questions Pin
Dustin Metzgar27-May-08 18:23
Dustin Metzgar27-May-08 18:23 
AnswerMessage Closed Pin
20-Jun-08 19:52
Arash Aghlara20-Jun-08 19:52 
GeneralWell deserving of a 5! Pin
Chad Knudson26-May-08 15:46
Chad Knudson26-May-08 15:46 
GeneralRe: Well deserving of a 5! Pin
DonSn26-May-08 16:31
DonSn26-May-08 16:31 
GeneralAdvice: Automatic-Parser-Generators with AST (get a look at them) Pin
AndyHo26-May-08 14:15
professionalAndyHo26-May-08 14:15 
GeneralRe: Advice: Automatic-Parser-Generators with AST (get a look at them) Pin
DonSn26-May-08 17:47
DonSn26-May-08 17:47 
GeneralRe: Advice: Automatic-Parser-Generators with AST (get a look at them) Pin
AndyHo26-May-08 19:26
professionalAndyHo26-May-08 19:26 
GeneralFantastic aside from the performance degradation Pin
ZGers26-May-08 2:28
ZGers26-May-08 2:28 
GeneralRe: Fantastic aside from the performance degradation Pin
DonSn26-May-08 17:28
DonSn26-May-08 17:28 
GeneralGood work !!! Pin
Ashutosh Phoujdar26-May-08 0:47
Ashutosh Phoujdar26-May-08 0:47 
GeneralExcelent Pin
Abhijit Jana25-May-08 1:44
professionalAbhijit Jana25-May-08 1:44 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.