how to create xm elements with nodes - C# Discussion Boards

Re: Application common data with write permission to all user

OriginalGriff14-Dec-09 1:32

14-Dec-09 1:32

If you have created the file when you logged in, then the most likely reason it is not accessible to all users is that it is still in use. It will remain in use once you create it until it is disposed. You can try wrapping you access code in "using" blocks, but I suspect you are always going to get problems of file in use if you try to have multiple users capable of writing to it.

Have you considered using a database instead? You may get less problems.

All those who believe in psycho kinesis, raise my hand.

Re: Application common data with write permission to all user

Maddie from Dartford14-Dec-09 2:49

Maddie from Dartford

14-Dec-09 2:49

Thanks a lot for reply.
In our application, an XML File is generated when user wants to save some application data from given menu option. These data can be read back to display the information by any logged user. Now, other user should be able to modify the data and save it back. At a time only one user is editing so I think the problem is with the access right (Exception says the same thing: access denied).

Regards,
Gajesh

Re: Application common data with write permission to all user

OriginalGriff14-Dec-09 4:10

OriginalGriff

14-Dec-09 4:10

It doesn't have to be the access permissions - though it is worth checking that your users have the correct access rights to the folder. Have you tried setting it to a shared folder with universal read/write permissions?

The other possibility is that the file is still in use - you will get an access denied for this as well as for incorrect permissions. If you do not dispose of your File object, it may not be destroyed for some considerable time, and during this period it can be in use even if you have closed it. Ensure that all your file access code - including your users - is safely within "using" blocks and you should be ok. Even then, you will probably have to try...catch...wait...retry a few times for safety if you have multiple users writing to a file.

I would still be considering a database rather than an XML file!

All those who believe in psycho kinesis, raise my hand.

Re: Application common data with write permission to all user

Maddie from Dartford14-Dec-09 6:39

Maddie from Dartford

14-Dec-09 6:39

Thanks.
I think it is problem of access permission only. Whenever you create any folder, other user has read only permissions for that folders. So if any other user(from same domain) tries to modify the folder or file within it, it says Access denied. I am trying to create a folder programatically with full control to all user....
How to do it?

Any kind of direction will be great help.
Also, Let me know if i am wrong or need to take some different approach.

Re: Application common data with write permission to all user

OriginalGriff14-Dec-09 8:32

OriginalGriff

14-Dec-09 8:32

I haven't tried it myself, but look at this.[^]

All those who believe in psycho kinesis, raise my hand.

Re: Application common data with write permission to all user

Maddie from Dartford15-Dec-09 21:30

Maddie from Dartford

15-Dec-09 21:30

This is what i did and works for me.

bool isModified = false;
DirectoryInfo myDirectoryInfo = new DirectoryInfo("FolderPath");
DirectorySecurity myDirectorySecurity = myDirectoryInfo.GetAccessControl();

AccessRule rule = new FileSystemAccessRule("Users", 
                                            FileSystemRights.Write | 
                                                 FileSystemRights.ReadAndExecute | 
                                                 FileSystemRights.Modify, 
                                            InheritanceFlags.ContainerInherit | 
                                                 InheritanceFlags.ObjectInherit,
                                            PropagationFlags.InheritOnly,
                                            AccessControlType.Allow);

myDirectorySecurity .ModifyAccessRule(AccessControlModification.Add, rule, out isModified);
myDirectoryInfo .SetAccessControl(myDirectorySecurity );

Thanks to all.

C# code to Cut Polygon in shape file using MapWinGIS

rag_Singh13-Dec-09 23:34

rag_Singh

13-Dec-09 23:34

Hello i want to cut polygone in shape file.I have open a shape file in MapWinGis MapControl and want to splite any selected polygon from the point clicking by mouse.
Help me please......

how to create xm elements with nodes

Priya Prk13-Dec-09 23:33

Priya Prk

13-Dec-09 23:33

Dear all,

i have a xml document:

<config>
<import>
</import>
</config>

now i have to add some nodes inside the import element. the end result most be like this:

<config>
<import>
<company>
<name>MS</name>
<address>address of the company</address>
</company>
</import>
</config>

Thanks in advance.

Message Closed

13-Dec-09 23:48

stancrm

13-Dec-09 23:48

Message Closed

modified 23-Nov-14 6:56am.

Re: how to create xm elements with nodes

Priya Prk14-Dec-09 0:13

Priya Prk

14-Dec-09 0:13

Thanks stancrm,

bud this does not what im asking...the nodes 'name' and 'address' most be inside the company element.

add images in checkedlistbox in C#

yogesh_softworld12313-Dec-09 22:44

yogesh_softworld123

13-Dec-09 22:44

how to add images in checkedlist box in C# as item./?

yogesh

Re: add images in checkedlistbox in C#

Eduard Keilholz13-Dec-09 23:15

Eduard Keilholz

13-Dec-09 23:15

You will have to change the control yourself, or either use a different control.

.: I love it when a plan comes together :.
http://www.zonderpunt.nl

Enabling buttons at run time

tasumisra13-Dec-09 22:37

tasumisra

13-Dec-09 22:37

Hey guys,

I have 5 buttons in my form. During the page load event only 1 will be enabled, rest all i have made it Enabled = false. I have one more button named as "More", when a user clicks on it, the buttons which are disabled should be enabled one by one. Can someone please give me a solution for this.

Thanks,
Vikas

vikas da

Re: Enabling buttons at run time

Rob Philpott13-Dec-09 22:57

Rob Philpott

13-Dec-09 22:57

Put this in your button handler:

button5.Enabled = button4.Enabled;
button4.Enabled = button3.Enabled;
button3.Enabled = button2.Enabled;
button2.Enabled = button1.Enabled;

Regards,
Rob Philpott.

Re: Enabling buttons at run time [modified]

#realJSOP13-Dec-09 23:56

#realJSOP

13-Dec-09 23:56

Write a method like this:

private void ToggleButtonGroup(Button button)
{
    button1.Enabled = (this.button1 == button);
    button2.Enabled = (this.button2 == button);
    button3.Enabled = (this.button3 == button);
    button4.Enabled = (this.button4 == button);
}

Call this method from each appropriate button handler. If you passed this.button4 to the method, button4 would be enabled, and the rest would be disabled.

.45 ACP - because shooting twice is just silly
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"The staggering layers of obscenity in your statement make it a work of art on so many levels." - J. Jystad, 2001

modified on Monday, December 14, 2009 8:22 AM

Re: Enabling buttons at run time

tasumisra14-Dec-09 4:10

tasumisra

14-Dec-09 4:10

Thanks guys for your help

vikas da

Re: Enabling buttons at run time

vtchris-peterson14-Dec-09 4:00

vtchris-peterson

14-Dec-09 4:00

I would suggest putting the additional buttons in a Panel, then you can toggle just one Enabled property.

How to get noticed about z-order change?

cuker113-Dec-09 20:46

cuker1

13-Dec-09 20:46

I have a form with few child controls that are overlapping each other. I need to have one of them to be always displayed above all others. In some special situations the z-order of the child controls is being changed. Is it possible to be notified about z-order change? As a result I will bring my special child control in front of all other child controls.

Re: How to get noticed about z-order change?

dan!sh 13-Dec-09 21:34

dan!sh

13-Dec-09 21:34

When the z-order of the control is changed, its index in the Controls array will also change. AFAIK there is no particular event to track this. Although if you cab track that the item indices in that array has changed, you can set your child control as top most.

50-50-90 rule: Anytime I have a 50-50 chance of getting something right, there's a 90% probability I'll get it wrong...!!

Change currently image?

dennis_max2713-Dec-09 20:44

dennis_max27

13-Dec-09 20:44

First i had this:

private void pbEdit_OnMouseEnter(object sender, EventArgs e)
        {
            pbTextEdit.Image = Image.FromFile("C:/data/edit_color.gif");

}

Now I wanna use 1 function for different pictureboxes:
My code i was thinking of but didn't work Frown | :(

this.Image = Image.FromFile("C:/data/edit_color.gif");

Dennis,

Re: Change currently image?

dan!sh 13-Dec-09 21:00

dan!sh

13-Dec-09 21:00

If I understood your question correct, you need to have a single method to change images of multiple picture boxes. And that method should be the MouseEnter event handler. Right?

You can have single event handler for all the picture boxes. This way:

picBox1.MouseEnter += new EventHandler(EventHandlerName);
picBox2.MouseEnter += new EventHandler(EventHandlerName);

Same way you can do this fro others as well.

Now, in order to change the image, use the following:

PictureBox picBox = sender as PictureBox;
picBox.Image = Image.FromFile("Set file path here");

In case all the picture boxes need to show the different images, you can keep the image file path in the Tag property of the PictureBox and then use it like this:

picBox.Image = Image.FromFile(picBox.Tag.ToString());

50-50-90 rule: Anytime I have a 50-50 chance of getting something right, there's a 90% probability I'll get it wrong...!!

Re: Change currently image?

dennis_max2713-Dec-09 21:18

dennis_max27

13-Dec-09 21:18

Im having 10 picturesboxes that im using as button.

When im mouse over over now it is changed from image.
and when i click on that button its openeing in every 10 buttons a different window.

Have that now Smile | :)

But all 10 picatureboxes must have the same mousenter and mouseleave event.

SO i didnt't want to make 10 the same mouseenter and mouseleave events.

Is it possible in 1?

Re: Change currently image?

dan!sh 13-Dec-09 21:32

dan!sh

13-Dec-09 21:32

Offcourse it is. Did you saw the first code block I have written?

50-50-90 rule: Anytime I have a 50-50 chance of getting something right, there's a 90% probability I'll get it wrong...!!

Re: Change currently image?

dennis_max2713-Dec-09 21:35

dennis_max27

13-Dec-09 21:35

I've made this already:
picBox1.MouseEnter += new EventHandler(EventHandlerName);
picBox2.MouseEnter += new EventHandler(EventHandlerName);

But I must declare in the eventhandler that it is changed the only the image the one where the mouse is hovering then, not all images.

1 eventhandler where he only works with the image where it's mouseentering and mouse leaving then.

It's difficult to explain for me.

Re: Change currently image?

dan!sh 13-Dec-09 21:42

dan!sh

13-Dec-09 21:42

Did you read the second and the third code blocks?

The object sender will be the picturebox which fires the event. This means, that if you do a mouse enter on picturebox1, the sender will be picturebox1. If you do mouse enter on picturebox2, sender will be picturebox2. Now, if you cast sender to a picturebox, and change its image, it will change image of only the concerned picturebox.

50-50-90 rule: Anytime I have a 50-50 chance of getting something right, there's a 90% probability I'll get it wrong...!!

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.