|
Move the code from your constructor to the end of th OnInitDialog function and you should not get the assertion. When the constructor is called your dialog has not been created yet, so GetDlgItem(IDC_LIST1) returns NULL as it can not find the specified resource. You can not call an member of a pointer when the pointer is NULL.
Artificial Intelligence is no match for Natural Stupidity
No one can understand the truth until he drinks of coffee's frothy goodness. ~Sheik Abd-al-Kadir
I can't always be wrong ... or can I?
|
|
|
|
|
rp_suman wrote: NewDlg obj= new NewDlg();
obj.DoModal();
 What is this? If you are going to use the new operator, you have to have a pointer:
NewDlg *obj= new NewDlg();
obj->DoModal(); But this is unnecessary. Just use:
NewDlg obj;
obj.DoModal(); The calls to AddString() must be done in the OnInitDialog() method.
"A good athlete is the result of a good and worthy opponent." - David Crow
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
Hi,
Thanks for your great help.
I changed the code as you mentioned.
I am displaying the new dialog from the main dialog's OnInitDialog() function.
But how can I get the text of selected list item in new dialog after user clicked "OK".
My code is as follows:
NewDlg obj;<br />
obj.DoModal();<br />
<br />
CListBox* pList;<br />
pList = (CListBox*)obj.GetDlgItem(IDD_DIALOG1);<br />
DWORD strSelect = pList->GetItemData(pList->GetCurSel());
I am getting Debug Assertion when calling GetDlgItem().
Best Regards,
Suman
|
|
|
|
|
rp_suman wrote: But how can I get the text of selected list item in new dialog after user clicked "OK".
By doing so in the OnOK() method.
rp_suman wrote: I am getting Debug Assertion when calling GetDlgItem().
Because you are trying to access a non-existent window. Once DoModal() returns, any windows it owned are destroyed.
"A good athlete is the result of a good and worthy opponent." - David Crow
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
A task infront of me is to develop local chat server
which will just accept data from everyone and pass it to person whom it is to be send.
Server compiles fine but as soon as I run it ,it fails. Errors come at Accept statement.
The requirement is due to internet is not allowed.
And way for instant communication is required as comapany
layout is very complecated to reach from one room to other. Official mail is too inconvenient for small messages.
//CSocket cs,cr[500]; defined in h file
// bool connected;
BOOL CChatserverDlg::OnInitDialog()
{
CDialog::OnInitDialog();
---------------
------------------
----------------
count = 0;
connected = false;
connected = cs.Create(4000,SOCK_STREAM);
SilentWork();
return TRUE;
}
void CChatserverDlg::SilentWork()
{
bool check = false;
check = cs.Listen();
for(int i = 0;i < 500;i++) //even I reduce number error comes
{
AfxBeginThread(&thread,0);
count++;
}
}
UINT thread(LPVOID p)
{
CChatserverDlg* dlg = (CChatserverDlg*)AfxGetApp()->GetMainWnd();
SOCKADDR* lpSockAddr;
dlg->cs.Accept(dlg->cr[count],lpSockAddr );
while(dlg->connected)
{
ULONG nBytesToReceive=0;
DWORD dwErr;
if( !dlg->cr[count].IOCtl(FIONREAD, &nBytesToReceive))
{
dwErr = WSAGetLastError();
}
if( nBytesToReceive==0 )
{ }
else
{
char* buff = new char[15];
try
{
dlg->cr[count].Receive(buff,15,0);
}
catch(CException e)
{
}
dlg->m_ldList1.AddString(buff);
char* data = new char[1024];
bool continueloop = true;
do
{
ULONG ToReceive=0;
if( !dlg->cr[count].IOCtl(FIONREAD, &ToReceive))
{
dwErr = WSAGetLastError();
}
if( ToReceive==0 )
{ }
else
{
dlg->cr[count].Receive(data,1023,0);
dlg->cr[count].SendTo(data,1023,4000,buff,0);
if(NULL != strstr("diconnected",data))
continueloop = false;
}
}while(continueloop);
|| ART OF LIVING ||
|| ART OF LIVING ||
|
|
|
|
|
Dear all,
i have been requested to post my question on C here.Thanks
Here is my problem:
Am doing some analysis on RC4 TKIP.I want to create an RC4 key and XOR it with data.My RC4 key is Ok.But i want to pass it as a parameter so as to do encryption.
Can anyone among you help,as i have the RC4 keys in an array.But i want to pass this result in the second part of my program so as to do encryption with that key.
kind regards and thanks
NB
rc4key[0] = tsc2 % 256; <br />
rc4key[1] = (((tsc2 / 256) % 256) | 0x20) & 0x7f;<br />
rc4key[2] = (tsc2 / 256) % 256; <br />
rc4key[3] = ((ppk5 ^ ((256*key[1]) + key[0])) >> 1) % 256;<br />
<br />
rc4key[4] = ppk0 % 256;<br />
rc4key[5] = (ppk0 / 256) % 256;<br />
<br />
rc4key[6] = ppk1 % 256;<br />
rc4key[7] = (ppk1 / 256) % 256;<br />
<br />
rc4key[8] = ppk2 % 256;<br />
rc4key[9] = (ppk2 / 256) % 256;<br />
<br />
rc4key[10] = ppk3 % 256;<br />
rc4key[11] = (ppk3 / 256) % 256;<br />
<br />
rc4key[12] = ppk4 % 256;<br />
rc4key[13] = (ppk4 / 256) % 256;<br />
<br />
rc4key[14] = ppk5 % 256;<br />
rc4key[15] = (ppk5 / 256) % 256;<br />
void rc4(<br />
unsigned char *rc4key,<br />
<br />
int cipherstream_length,<br />
unsigned char *cipherstream<br />
);<br />
void rc4_encrypt(<br />
unsigned char *rc4key,<br />
<br />
unsigned char *data,<br />
int data_length,<br />
unsigned char *ciphertext<br />
);<br />
<br />
these are the codes, I wanted to use the result in the array above and used it as a pointer!!!
am nt getting any syntax error..but isthere any logical error?
please advice.
nb
|
|
|
|
|
If rc4key is an unsigned char array, then just pass rc4key, which is the same as &rc4key[0].
What is the line(s) of code you're getting syntax error on?
Mark
Mark Salsbery
Microsoft MVP - Visual C++
|
|
|
|
|
Hi,
I want to dock the views in my MFC Application that means views can be drag and drop from one place of my frame area to other.How can it possible? Please help me
ganesh
|
|
|
|
|
I dotn know about Views but you can dock dialogs using CDialogBar
which View types you wanna make docable??
|
|
|
|
|
I want to dock the views which are derived from CView.
|
|
|
|
|
i am in need of how to add the checkbox image to the header of a CListCtrl i have a child dialog in the main dialog ive looked in msdn but im lost
CImageList * imagelist;<br />
CHeaderCtrl * m_pHdrCtrl;<br />
imagelist = new CImageList();<br />
ASSERT(imagelist != NULL);<br />
imagelist->Create(13, 13, ILC_COLOR24, 3, 1);<br />
CBitmap bm;<br />
bm.LoadBitmap(IDB_CHECKBOXES);<br />
imagelist->Add(&bm, RGB(255, 0, 255));<br />
m_pHdrCtrl->SetImageList(imagelist);
that gives no errors on compiling it
m_pHdrCtrl->SetImageList(imagelist); <-- wont allow me to build the exe
im a beginner be gentle when telling me how wrong it is  i cant figure out how to add the imagelist to the header.
|
|
|
|
|
locoone wrote: m_pHdrCtrl->SetImageList(imagelist); <-- wont allow me to build the exe
What do you mean? After puttin the above statement your not getting the output exe?
|
|
|
|
|
|
now only i noticed you are not assigning any thing in to the CHeaderCtrl * m_pHdrCtrl;
you must call the GetHeaderCtrl() function and set that pointer to the m_pHdrCtrl. like
CHeaderCtrl * m_pHdrCtrl = m_ListCTrl.GetHeaderCtrl();
|
|
|
|
|
|
Hi,
if this is the code you wrote it cannot work. You declared a pointer to CHeaderCtrl and some lines below you access this pointer which you never set. This code compiles fine but certainly it results in a crash! You have to ask your CListCtrl instance for the pointer to its header control...
Try the following:
CHeaderCtrl* m_pHdrCtrl = m_YourListCtrl.GetHeaderCtrl();
if(m_pHdrCtrl != NULL)
{
CImageList * imagelist;
imagelist = new CImageList();
ASSERT(imagelist != NULL);
imagelist->Create(13, 13, ILC_COLOR24, 3, 1);
CBitmap bm;
bm.LoadBitmap(IDB_CHECKBOXES);
imagelist->Add(&bm, RGB(255, 0, 255));
m_pHdrCtrl->SetImageList(imagelist);
}
cheers,
mykel
OMM: "Let us be thankful we have an occupation to fill. Work hard, increase production, prevent accidents and be happy."
|
|
|
|
|
Hi,
Is it possible to have multiple thumbs along a slider control, if so can anyone direct me as to where I can find informantion on how to do this..
Thanks in advance!
Stefan.
All answers have a question? All code has an end.
|
|
|
|
|
Please let me know How we can get the size of CPU cache?
and how can er read and write CPU cache using MFC?
Surendra Vishwkarma
|
|
|
|
|
// Camel - CPU Identifying Tool
// Copyright (C) 2002, Iain Chesworth
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#include "stdafx.h"
#include "cpu_info.h"
// --------------------------------------------------------
//
// Constructor Functions - CPUInfo Class
//
// --------------------------------------------------------
CPUInfo::CPUInfo ()
{
// Check to see if this processor supports CPUID.
if (DoesCPUSupportCPUID ()) {
// Retrieve the CPU details.
RetrieveCPUIdentity ();
RetrieveCPUFeatures ();
if (!RetrieveCPUClockSpeed ()) RetrieveClassicalCPUClockSpeed ();
// Attempt to retrieve cache information.
if (!RetrieveCPUCacheDetails ()) RetrieveClassicalCPUCacheDetails ();
// Retrieve the extended CPU details.
if (!RetrieveExtendedCPUIdentity ()) RetrieveClassicalCPUIdentity ();
RetrieveExtendedCPUFeatures ();
// Now attempt to retrieve the serial number (if possible).
RetrieveProcessorSerialNumber ();
}
}
CPUInfo::~CPUInfo ()
{
}
// --------------------------------------------------------
//
// Public Functions - CPUInfo Class
//
// --------------------------------------------------------
char * CPUInfo::GetVendorString ()
{
// Return the vendor string.
return ChipID.Vendor;
}
char * CPUInfo::GetVendorID ()
{
// Return the vendor ID.
switch (ChipManufacturer) {
case Intel:
return "Intel Corporation";
case AMD:
return "Advanced Micro Devices";
case NSC:
return "National Semiconductor";
case Cyrix:
return "Cyrix Corp., VIA Inc.";
case NexGen:
return "NexGen Inc., Advanced Micro Devices";
case IDT:
return "IDT\\Centaur, Via Inc.";
case UMC:
return "United Microelectronics Corp.";
case Rise:
return "Rise";
case Transmeta:
return "Transmeta";
default:
return "Unknown Manufacturer";
}
}
char * CPUInfo::GetTypeID ()
{
// Return the type ID of the CPU.
char * szTypeID = new char [32];
itoa (ChipID.Type, szTypeID, 10);
return szTypeID;
}
char * CPUInfo::GetFamilyID ()
{
// Return the family of the CPU present.
char * szFamilyID = new char [32];
itoa (ChipID.Family, szFamilyID, 10);
return szFamilyID;
}
char * CPUInfo::GetModelID ()
{
// Return the model of CPU present.
char * szModelID = new char [32];
itoa (ChipID.Model, szModelID, 10);
return szModelID;
}
char * CPUInfo::GetSteppingCode ()
{
// Return the stepping code of the CPU present.
char * szSteppingCode = new char [32];
itoa (ChipID.Revision, szSteppingCode, 10);
return szSteppingCode;
}
char * CPUInfo::GetExtendedProcessorName ()
{
// Return the stepping code of the CPU present.
return ChipID.ProcessorName;
}
char * CPUInfo::GetProcessorSerialNumber ()
{
// Return the serial number of the processor in hexadecimal: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx.
return ChipID.SerialNumber;
}
int CPUInfo::GetLogicalProcessorsPerPhysical ()
{
// Return the logical processors per physical.
return Features.ExtendedFeatures.LogicalProcessorsPerPhysical;
}
int CPUInfo::GetProcessorClockFrequency ()
{
// Return the processor clock frequency.
if (Speed != NULL)
return Speed->CPUSpeedInMHz;
else
// Display the error condition.
return -1;
}
int CPUInfo::GetProcessorAPICID ()
{
// Return the APIC ID.
return Features.ExtendedFeatures.APIC_ID;
}
int CPUInfo::GetProcessorCacheXSize (DWORD dwCacheID)
{
// Return the chosen cache size.
switch (dwCacheID) {
case L1CACHE_FEATURE:
return Features.L1CacheSize;
case L2CACHE_FEATURE:
return Features.L2CacheSize;
case L3CACHE_FEATURE:
return Features.L3CacheSize;
}
// The user did something strange just return and error.
return -1;
}
bool CPUInfo::DoesCPUSupportFeature (DWORD dwFeature)
{
bool bHasFeature = false;
// Check for MMX instructions.
if (((dwFeature & MMX_FEATURE) != 0) && Features.HasMMX) bHasFeature = true;
// Check for MMX+ instructions.
if (((dwFeature & MMX_PLUS_FEATURE) != 0) && Features.ExtendedFeatures.HasMMXPlus) bHasFeature = true;
// Check for SSE FP instructions.
if (((dwFeature & SSE_FEATURE) != 0) && Features.HasSSE) bHasFeature = true;
// Check for SSE FP instructions.
if (((dwFeature & SSE_FP_FEATURE) != 0) && Features.HasSSEFP) bHasFeature = true;
// Check for SSE MMX instructions.
if (((dwFeature & SSE_MMX_FEATURE) != 0) && Features.ExtendedFeatures.HasSSEMMX) bHasFeature = true;
// Check for SSE2 instructions.
if (((dwFeature & SSE2_FEATURE) != 0) && Features.HasSSE2) bHasFeature = true;
// Check for 3DNow! instructions.
if (((dwFeature & AMD_3DNOW_FEATURE) != 0) && Features.ExtendedFeatures.Has3DNow) bHasFeature = true;
// Check for 3DNow+ instructions.
if (((dwFeature & AMD_3DNOW_PLUS_FEATURE) != 0) && Features.ExtendedFeatures.Has3DNowPlus) bHasFeature = true;
// Check for IA64 instructions.
if (((dwFeature & IA64_FEATURE) != 0) && Features.HasIA64) bHasFeature = true;
// Check for MP capable.
if (((dwFeature & MP_CAPABLE) != 0) && Features.ExtendedFeatures.SupportsMP) bHasFeature = true;
// Check for a serial number for the processor.
if (((dwFeature & SERIALNUMBER_FEATURE) != 0) && Features.HasSerial) bHasFeature = true;
// Check for a local APIC in the processor.
if (((dwFeature & APIC_FEATURE) != 0) && Features.HasAPIC) bHasFeature = true;
// Check for CMOV instructions.
if (((dwFeature & CMOV_FEATURE) != 0) && Features.HasCMOV) bHasFeature = true;
// Check for MTRR instructions.
if (((dwFeature & MTRR_FEATURE) != 0) && Features.HasMTRR) bHasFeature = true;
// Check for L1 cache size.
if (((dwFeature & L1CACHE_FEATURE) != 0) && (Features.L1CacheSize != -1)) bHasFeature = true;
// Check for L2 cache size.
if (((dwFeature & L2CACHE_FEATURE) != 0) && (Features.L2CacheSize != -1)) bHasFeature = true;
// Check for L3 cache size.
if (((dwFeature & L3CACHE_FEATURE) != 0) && (Features.L3CacheSize != -1)) bHasFeature = true;
// Check for ACPI capability.
if (((dwFeature & ACPI_FEATURE) != 0) && Features.HasACPI) bHasFeature = true;
// Check for thermal monitor support.
if (((dwFeature & THERMALMONITOR_FEATURE) != 0) && Features.HasThermal) bHasFeature = true;
// Check for temperature sensing diode support.
if (((dwFeature & TEMPSENSEDIODE_FEATURE) != 0) && Features.ExtendedFeatures.PowerManagement.HasTempSenseDiode) bHasFeature = true;
// Check for frequency ID support.
if (((dwFeature & FREQUENCYID_FEATURE) != 0) && Features.ExtendedFeatures.PowerManagement.HasFrequencyID) bHasFeature = true;
// Check for voltage ID support.
if (((dwFeature & VOLTAGEID_FREQUENCY) != 0) && Features.ExtendedFeatures.PowerManagement.HasVoltageID) bHasFeature = true;
return bHasFeature;
}
// --------------------------------------------------------
//
// Private Functions - CPUInfo Class
//
// --------------------------------------------------------
bool __cdecl CPUInfo::DoesCPUSupportCPUID ()
{
int CPUIDPresent = 0;
#ifdef _WIN32
// Use SEH to determine CPUID presence
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
mov eax, 0
CPUID_INSTRUCTION
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
// Stop the class from trying to use CPUID again!
CPUIDPresent = false;
return false;
}
#else
// The "right" way, which doesn't work under certain Windows versions
__try {
_asm {
pushfd ; save EFLAGS to stack.
pop eax ; store EFLAGS in eax.
mov edx, eax ; save in ebx for testing later.
xor eax, 0200000h ; switch bit 21.
push eax ; copy "changed" value to stack.
popfd ; save "changed" eax to EFLAGS.
pushfd
pop eax
xor eax, edx ; See if bit changeable.
jnz short cpuid_present ; if so, mark
mov eax, -1 ; CPUID not present - disable its usage
jmp no_features
cpuid_present:
mov eax, 0 ; CPUID capable CPU - enable its usage.
no_features:
mov CPUIDPresent, eax ; Save the value in eax to a variable.
}
}
// A generic catch-all just to be sure...
__except (1) {
// Stop the class from trying to use CPUID again!
CPUIDPresent = false;
return false;
}
#endif
// Return true to indicate support or false to indicate lack.
return (CPUIDPresent == 0) ? true : false;
}
bool __cdecl CPUInfo::RetrieveCPUFeatures ()
{
int CPUFeatures = 0;
int CPUAdvanced = 0;
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 1 --> eax: CPU ID - bits 31..16 - unused, bits 15..12 - type, bits 11..8 - family, bits 7..4 - model, bits 3..0 - mask revision
; ebx: 31..24 - default APIC ID, 23..16 - logical processsor ID, 15..8 - CFLUSH chunk size , 7..0 - brand ID
; edx: CPU feature flags
mov eax,1
CPUID_INSTRUCTION
mov CPUFeatures, edx
mov CPUAdvanced, ebx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Retrieve the features of CPU present.
Features.HasFPU = ((CPUFeatures & 0x00000001) != 0); // FPU Present --> Bit 0
Features.HasTSC = ((CPUFeatures & 0x00000010) != 0); // TSC Present --> Bit 4
Features.HasAPIC = ((CPUFeatures & 0x00000200) != 0); // APIC Present --> Bit 9
Features.HasMTRR = ((CPUFeatures & 0x00001000) != 0); // MTRR Present --> Bit 12
Features.HasCMOV = ((CPUFeatures & 0x00008000) != 0); // CMOV Present --> Bit 15
Features.HasSerial = ((CPUFeatures & 0x00040000) != 0); // Serial Present --> Bit 18
Features.HasACPI = ((CPUFeatures & 0x00400000) != 0); // ACPI Capable --> Bit 22
Features.HasMMX = ((CPUFeatures & 0x00800000) != 0); // MMX Present --> Bit 23
Features.HasSSE = ((CPUFeatures & 0x02000000) != 0); // SSE Present --> Bit 25
Features.HasSSE2 = ((CPUFeatures & 0x04000000) != 0); // SSE2 Present --> Bit 26
Features.HasThermal = ((CPUFeatures & 0x20000000) != 0); // Thermal Monitor Present --> Bit 29
Features.HasIA64 = ((CPUFeatures & 0x40000000) != 0); // IA64 Present --> Bit 30
// Retrieve extended SSE capabilities if SSE is available.
if (Features.HasSSE) {
// Attempt to __try some SSE FP instructions.
__try {
// Perform: orps xmm0, xmm0
_asm {
_emit 0x0f
_emit 0x56
_emit 0xc0
}
// SSE FP capable processor.
Features.HasSSEFP = true;
}
// A generic catch-all just to be sure...
__except (1) {
// bad instruction - processor or OS cannot handle SSE FP.
Features.HasSSEFP = false;
}
} else {
// Set the advanced SSE capabilities to not available.
Features.HasSSEFP = false;
}
// Retrieve Intel specific extended features.
if (ChipManufacturer == Intel) {
Features.ExtendedFeatures.SupportsHyperthreading = ((CPUFeatures & 0x10000000) != 0); // Intel specific: Hyperthreading --> Bit 28
Features.ExtendedFeatures.LogicalProcessorsPerPhysical = (Features.ExtendedFeatures.SupportsHyperthreading) ? ((CPUAdvanced & 0x00FF0000) >> 16) : 1;
if ((Features.ExtendedFeatures.SupportsHyperthreading) && (Features.HasAPIC)){
// Retrieve APIC information if there is one present.
Features.ExtendedFeatures.APIC_ID = ((CPUAdvanced & 0xFF000000) >> 24);
}
}
return true;
}
bool __cdecl CPUInfo::RetrieveCPUIdentity ()
{
int CPUVendor[3];
int CPUSignature;
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0 --> eax: maximum value of CPUID instruction.
; ebx: part 1 of 3; CPU signature.
; edx: part 2 of 3; CPU signature.
; ecx: part 3 of 3; CPU signature.
mov eax, 0
CPUID_INSTRUCTION
mov CPUVendor[0 * TYPE int], ebx
mov CPUVendor[1 * TYPE int], edx
mov CPUVendor[2 * TYPE int], ecx
; <<cpuid>>
; eax = 1 --> eax: CPU ID - bits 31..16 - unused, bits 15..12 - type, bits 11..8 - family, bits 7..4 - model, bits 3..0 - mask revision
; ebx: 31..24 - default APIC ID, 23..16 - logical processsor ID, 15..8 - CFLUSH chunk size , 7..0 - brand ID
; edx: CPU feature flags
mov eax,1
CPUID_INSTRUCTION
mov CPUSignature, eax
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Process the returned information.
memcpy (ChipID.Vendor, &(CPUVendor[0]), sizeof (int));
memcpy (&(ChipID.Vendor[4]), &(CPUVendor[1]), sizeof (int));
memcpy (&(ChipID.Vendor[8]), &(CPUVendor[2]), sizeof (int));
ChipID.Vendor[12] = '\0';
// Attempt to retrieve the manufacturer from the vendor string.
if (strcmp (ChipID.Vendor, "GenuineIntel") == 0) ChipManufacturer = Intel; // Intel Corp.
else if (strcmp (ChipID.Vendor, "UMC UMC UMC ") == 0) ChipManufacturer = UMC; // United Microelectronics Corp.
else if (strcmp (ChipID.Vendor, "AuthenticAMD") == 0) ChipManufacturer = AMD; // Advanced Micro Devices
else if (strcmp (ChipID.Vendor, "AMD ISBETTER") == 0) ChipManufacturer = AMD; // Advanced Micro Devices (1994)
else if (strcmp (ChipID.Vendor, "CyrixInstead") == 0) ChipManufacturer = Cyrix; // Cyrix Corp., VIA Inc.
else if (strcmp (ChipID.Vendor, "NexGenDriven") == 0) ChipManufacturer = NexGen; // NexGen Inc. (now AMD)
else if (strcmp (ChipID.Vendor, "CentaurHauls") == 0) ChipManufacturer = IDT; // IDT/Centaur (now VIA)
else if (strcmp (ChipID.Vendor, "RiseRiseRise") == 0) ChipManufacturer = Rise; // Rise
else if (strcmp (ChipID.Vendor, "GenuineTMx86") == 0) ChipManufacturer = Transmeta; // Transmeta
else if (strcmp (ChipID.Vendor, "TransmetaCPU") == 0) ChipManufacturer = Transmeta; // Transmeta
else if (strcmp (ChipID.Vendor, "Geode By NSC") == 0) ChipManufacturer = NSC; // National Semiconductor
else ChipManufacturer = UnknownManufacturer; // Unknown manufacturer
// Retrieve the family of CPU present.
ChipID.ExtendedFamily = ((CPUSignature & 0x0FF00000) >> 20); // Bits 27..20 Used
ChipID.ExtendedModel = ((CPUSignature & 0x000F0000) >> 16); // Bits 19..16 Used
ChipID.Type = ((CPUSignature & 0x0000F000) >> 12); // Bits 15..12 Used
ChipID.Family = ((CPUSignature & 0x00000F00) >> 8); // Bits 11..8 Used
ChipID.Model = ((CPUSignature & 0x000000F0) >> 4); // Bits 7..4 Used
ChipID.Revision = ((CPUSignature & 0x0000000F) >> 0); // Bits 3..0 Used
return true;
}
bool __cdecl CPUInfo::RetrieveCPUCacheDetails ()
{
int L1Cache[4] = { 0, 0, 0, 0 };
int L2Cache[4] = { 0, 0, 0, 0 };
// Check to see if what we are about to do is supported...
if (RetrieveCPUExtendedLevelSupport (0x80000005)) {
// Use assembly to retrieve the L1 cache information ...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0x80000005 --> eax: L1 cache information - Part 1 of 4.
; ebx: L1 cache information - Part 2 of 4.
; edx: L1 cache information - Part 3 of 4.
; ecx: L1 cache information - Part 4 of 4.
mov eax, 0x80000005
CPUID_INSTRUCTION
mov L1Cache[0 * TYPE int], eax
mov L1Cache[1 * TYPE int], ebx
mov L1Cache[2 * TYPE int], ecx
mov L1Cache[3 * TYPE int], edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Save the L1 data cache size (in KB) from ecx: bits 31..24 as well as data cache size from edx: bits 31..24.
Features.L1CacheSize = ((L1Cache[2] & 0xFF000000) >> 24);
Features.L1CacheSize += ((L1Cache[3] & 0xFF000000) >> 24);
} else {
// Store -1 to indicate the cache could not be queried.
Features.L1CacheSize = -1;
}
// Check to see if what we are about to do is supported...
if (RetrieveCPUExtendedLevelSupport (0x80000006)) {
// Use assembly to retrieve the L2 cache information ...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0x80000006 --> eax: L2 cache information - Part 1 of 4.
; ebx: L2 cache information - Part 2 of 4.
; edx: L2 cache information - Part 3 of 4.
; ecx: L2 cache information - Part 4 of 4.
mov eax, 0x80000006
CPUID_INSTRUCTION
mov L2Cache[0 * TYPE int], eax
mov L2Cache[1 * TYPE int], ebx
mov L2Cache[2 * TYPE int], ecx
mov L2Cache[3 * TYPE int], edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Save the L2 unified cache size (in KB) from ecx: bits 31..16.
Features.L2CacheSize = ((L2Cache[2] & 0xFFFF0000) >> 16);
} else {
// Store -1 to indicate the cache could not be queried.
Features.L2CacheSize = -1;
}
// Define L3 as being not present as we cannot test for it.
Features.L3CacheSize = -1;
// Return failure if we cannot detect either cache with this method.
return ((Features.L1CacheSize == -1) && (Features.L2CacheSize == -1)) ? false : true;
}
bool __cdecl CPUInfo::RetrieveClassicalCPUCacheDetails ()
{
int TLBCode = -1, TLBData = -1, L1Code = -1, L1Data = -1, L1Trace = -1, L2Unified = -1, L3Unified = -1;
int TLBCacheData[4] = { 0, 0, 0, 0 };
int TLBPassCounter = 0;
int TLBCacheUnit = 0;
do {
// Use assembly to retrieve the L2 cache information ...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 2 --> eax: TLB and cache information - Part 1 of 4.
; ebx: TLB and cache information - Part 2 of 4.
; ecx: TLB and cache information - Part 3 of 4.
; edx: TLB and cache information - Part 4 of 4.
mov eax, 2
CPUID_INSTRUCTION
mov TLBCacheData[0 * TYPE int], eax
mov TLBCacheData[1 * TYPE int], ebx
mov TLBCacheData[2 * TYPE int], ecx
mov TLBCacheData[3 * TYPE int], edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
int bob = ((TLBCacheData[0] & 0x00FF0000) >> 16);
// Process the returned TLB and cache information.
for (int nCounter = 0; nCounter < TLBCACHE_INFO_UNITS; nCounter ++) {
// First of all - decide which unit we are dealing with.
switch (nCounter) {
// eax: bits 8..15 : bits 16..23 : bits 24..31
case 0: TLBCacheUnit = ((TLBCacheData[0] & 0x0000FF00) >> 8); break;
case 1: TLBCacheUnit = ((TLBCacheData[0] & 0x00FF0000) >> 16); break;
case 2: TLBCacheUnit = ((TLBCacheData[0] & 0xFF000000) >> 24); break;
// ebx: bits 0..7 : bits 8..15 : bits 16..23 : bits 24..31
case 3: TLBCacheUnit = ((TLBCacheData[1] & 0x000000FF) >> 0); break;
case 4: TLBCacheUnit = ((TLBCacheData[1] & 0x0000FF00) >> 8); break;
case 5: TLBCacheUnit = ((TLBCacheData[1] & 0x00FF0000) >> 16); break;
case 6: TLBCacheUnit = ((TLBCacheData[1] & 0xFF000000) >> 24); break;
// ecx: bits 0..7 : bits 8..15 : bits 16..23 : bits 24..31
case 7: TLBCacheUnit = ((TLBCacheData[2] & 0x000000FF) >> 0); break;
case 8: TLBCacheUnit = ((TLBCacheData[2] & 0x0000FF00) >> 8); break;
case 9: TLBCacheUnit = ((TLBCacheData[2] & 0x00FF0000) >> 16); break;
case 10: TLBCacheUnit = ((TLBCacheData[2] & 0xFF000000) >> 24); break;
// edx: bits 0..7 : bits 8..15 : bits 16..23 : bits 24..31
case 11: TLBCacheUnit = ((TLBCacheData[3] & 0x000000FF) >> 0); break;
case 12: TLBCacheUnit = ((TLBCacheData[3] & 0x0000FF00) >> 8); break;
case 13: TLBCacheUnit = ((TLBCacheData[3] & 0x00FF0000) >> 16); break;
case 14: TLBCacheUnit = ((TLBCacheData[3] & 0xFF000000) >> 24); break;
// Default case - an error has occured.
default: return false;
}
// Now process the resulting unit to see what it means....
switch (TLBCacheUnit) {
case 0x00: break;
case 0x01: STORE_TLBCACHE_INFO (TLBCode, 4); break;
case 0x02: STORE_TLBCACHE_INFO (TLBCode, 4096); break;
case 0x03: STORE_TLBCACHE_INFO (TLBData, 4); break;
case 0x04: STORE_TLBCACHE_INFO (TLBData, 4096); break;
case 0x06: STORE_TLBCACHE_INFO (L1Code, 8); break;
case 0x08: STORE_TLBCACHE_INFO (L1Code, 16); break;
case 0x0a: STORE_TLBCACHE_INFO (L1Data, 8); break;
case 0x0c: STORE_TLBCACHE_INFO (L1Data, 16); break;
case 0x10: STORE_TLBCACHE_INFO (L1Data, 16); break; // <-- FIXME: IA-64 Only
case 0x15: STORE_TLBCACHE_INFO (L1Code, 16); break; // <-- FIXME: IA-64 Only
case 0x1a: STORE_TLBCACHE_INFO (L2Unified, 96); break; // <-- FIXME: IA-64 Only
case 0x22: STORE_TLBCACHE_INFO (L3Unified, 512); break;
case 0x23: STORE_TLBCACHE_INFO (L3Unified, 1024); break;
case 0x25: STORE_TLBCACHE_INFO (L3Unified, 2048); break;
case 0x29: STORE_TLBCACHE_INFO (L3Unified, 4096); break;
case 0x39: STORE_TLBCACHE_INFO (L2Unified, 128); break;
case 0x3c: STORE_TLBCACHE_INFO (L2Unified, 256); break;
case 0x40: STORE_TLBCACHE_INFO (L2Unified, 0); break; // <-- FIXME: No integrated L2 cache (P6 core) or L3 cache (P4 core).
case 0x41: STORE_TLBCACHE_INFO (L2Unified, 128); break;
case 0x42: STORE_TLBCACHE_INFO (L2Unified, 256); break;
case 0x43: STORE_TLBCACHE_INFO (L2Unified, 512); break;
case 0x44: STORE_TLBCACHE_INFO (L2Unified, 1024); break;
case 0x45: STORE_TLBCACHE_INFO (L2Unified, 2048); break;
case 0x50: STORE_TLBCACHE_INFO (TLBCode, 4096); break;
case 0x51: STORE_TLBCACHE_INFO (TLBCode, 4096); break;
case 0x52: STORE_TLBCACHE_INFO (TLBCode, 4096); break;
case 0x5b: STORE_TLBCACHE_INFO (TLBData, 4096); break;
case 0x5c: STORE_TLBCACHE_INFO (TLBData, 4096); break;
case 0x5d: STORE_TLBCACHE_INFO (TLBData, 4096); break;
case 0x66: STORE_TLBCACHE_INFO (L1Data, 8); break;
case 0x67: STORE_TLBCACHE_INFO (L1Data, 16); break;
case 0x68: STORE_TLBCACHE_INFO (L1Data, 32); break;
case 0x70: STORE_TLBCACHE_INFO (L1Trace, 12); break;
case 0x71: STORE_TLBCACHE_INFO (L1Trace, 16); break;
case 0x72: STORE_TLBCACHE_INFO (L1Trace, 32); break;
case 0x77: STORE_TLBCACHE_INFO (L1Code, 16); break; // <-- FIXME: IA-64 Only
case 0x79: STORE_TLBCACHE_INFO (L2Unified, 128); break;
case 0x7a: STORE_TLBCACHE_INFO (L2Unified, 256); break;
case 0x7b: STORE_TLBCACHE_INFO (L2Unified, 512); break;
case 0x7c: STORE_TLBCACHE_INFO (L2Unified, 1024); break;
case 0x7e: STORE_TLBCACHE_INFO (L2Unified, 256); break;
case 0x81: STORE_TLBCACHE_INFO (L2Unified, 128); break;
case 0x82: STORE_TLBCACHE_INFO (L2Unified, 256); break;
case 0x83: STORE_TLBCACHE_INFO (L2Unified, 512); break;
case 0x84: STORE_TLBCACHE_INFO (L2Unified, 1024); break;
case 0x85: STORE_TLBCACHE_INFO (L2Unified, 2048); break;
case 0x88: STORE_TLBCACHE_INFO (L3Unified, 2048); break; // <-- FIXME: IA-64 Only
case 0x89: STORE_TLBCACHE_INFO (L3Unified, 4096); break; // <-- FIXME: IA-64 Only
case 0x8a: STORE_TLBCACHE_INFO (L3Unified, 8192); break; // <-- FIXME: IA-64 Only
case 0x8d: STORE_TLBCACHE_INFO (L3Unified, 3096); break; // <-- FIXME: IA-64 Only
case 0x90: STORE_TLBCACHE_INFO (TLBCode, 262144); break; // <-- FIXME: IA-64 Only
case 0x96: STORE_TLBCACHE_INFO (TLBCode, 262144); break; // <-- FIXME: IA-64 Only
case 0x9b: STORE_TLBCACHE_INFO (TLBCode, 262144); break; // <-- FIXME: IA-64 Only
// Default case - an error has occured.
default: return false;
}
}
// Increment the TLB pass counter.
TLBPassCounter ++;
} while ((TLBCacheData[0] & 0x000000FF) > TLBPassCounter);
// Ok - we now have the maximum TLB, L1, L2, and L3 sizes...
if ((L1Code == -1) && (L1Data == -1) && (L1Trace == -1)) Features.L1CacheSize = -1;
else if ((L1Code == -1) && (L1Data == -1) && (L1Trace != -1)) Features.L1CacheSize = L1Trace;
else if ((L1Code != -1) && (L1Data == -1)) Features.L1CacheSize = L1Code;
else if ((L1Code == -1) && (L1Data != -1)) Features.L1CacheSize = L1Data;
else if ((L1Code != -1) && (L1Data != -1)) Features.L1CacheSize = L1Code + L1Data;
else Features.L1CacheSize = -1;
// Ok - we now have the maximum TLB, L1, L2, and L3 sizes...
if (L2Unified == -1) Features.L2CacheSize = -1;
else Features.L2CacheSize = L2Unified;
// Ok - we now have the maximum TLB, L1, L2, and L3 sizes...
if (L3Unified == -1) Features.L3CacheSize = -1;
else Features.L3CacheSize = L3Unified;
return true;
}
bool __cdecl CPUInfo::RetrieveCPUClockSpeed ()
{
// First of all we check to see if the RDTSC (0x0F, 0x31) instruction is supported.
if (!Features.HasTSC) return false;
// Get the clock speed.
Speed = new CPUSpeed ();
if (Speed == NULL) return false;
return true;
}
bool __cdecl CPUInfo::RetrieveClassicalCPUClockSpeed ()
{
LARGE_INTEGER liStart, liEnd, liCountsPerSecond;
double dFrequency, dDifference;
// Attempt to get a starting tick count.
QueryPerformanceCounter (&liStart);
__try {
_asm {
mov eax, 0x80000000
mov ebx, CLASSICAL_CPU_FREQ_LOOP
Timer_Loop:
bsf ecx,eax
dec ebx
jnz Timer_Loop
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Attempt to get a starting tick count.
QueryPerformanceCounter (&liEnd);
// Get the difference... NB: This is in seconds....
QueryPerformanceFrequency (&liCountsPerSecond);
dDifference = (((double) liEnd.QuadPart - (double) liStart.QuadPart) / (double) liCountsPerSecond.QuadPart);
// Calculate the clock speed.
if (ChipID.Family == 3) {
// 80386 processors.... Loop time is 115 cycles!
dFrequency = (((CLASSICAL_CPU_FREQ_LOOP * 115) / dDifference) / 1048576);
} else if (ChipID.Family == 4) {
// 80486 processors.... Loop time is 47 cycles!
dFrequency = (((CLASSICAL_CPU_FREQ_LOOP * 47) / dDifference) / 1048576);
} else if (ChipID.Family == 5) {
// Pentium processors.... Loop time is 43 cycles!
dFrequency = (((CLASSICAL_CPU_FREQ_LOOP * 43) / dDifference) / 1048576);
}
// Save the clock speed.
Features.CPUSpeed = (int) dFrequency;
return true;
}
bool __cdecl CPUInfo::RetrieveCPUExtendedLevelSupport (int CPULevelToCheck)
{
int MaxCPUExtendedLevel = 0;
// The extended CPUID is supported by various vendors starting with the following CPU models:
//
// Manufacturer & Chip Name | Family Model Revision
//
// AMD K6, K6-2 | 5 6 x
// Cyrix GXm, Cyrix III "Joshua" | 5 4 x
// IDT C6-2 | 5 8 x
// VIA Cyrix III | 6 5 x
// Transmeta Crusoe | 5 x x
// Intel Pentium 4 | f x x
//
// We check to see if a supported processor is present...
if (ChipManufacturer == AMD) {
if (ChipID.Family < 5) return false;
if ((ChipID.Family == 5) && (ChipID.Model < 6)) return false;
} else if (ChipManufacturer == Cyrix) {
if (ChipID.Family < 5) return false;
if ((ChipID.Family == 5) && (ChipID.Model < 4)) return false;
if ((ChipID.Family == 6) && (ChipID.Model < 5)) return false;
} else if (ChipManufacturer == IDT) {
if (ChipID.Family < 5) return false;
if ((ChipID.Family == 5) && (ChipID.Model < 8)) return false;
} else if (ChipManufacturer == Transmeta) {
if (ChipID.Family < 5) return false;
} else if (ChipManufacturer == Intel) {
if (ChipID.Family < 0xf) return false;
}
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0x80000000 --> eax: maximum supported extended level
mov eax,0x80000000
CPUID_INSTRUCTION
mov MaxCPUExtendedLevel, eax
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Now we have to check the level wanted vs level returned...
int nLevelWanted = (CPULevelToCheck & 0x7FFFFFFF);
int nLevelReturn = (MaxCPUExtendedLevel & 0x7FFFFFFF);
// Check to see if the level provided is supported...
if (nLevelWanted > nLevelReturn) return false;
return true;
}
bool __cdecl CPUInfo::RetrieveExtendedCPUFeatures ()
{
int CPUExtendedFeatures = 0;
// Check that we are not using an Intel processor as it does not support this.
if (ChipManufacturer == Intel) return false;
// Check to see if what we are about to do is supported...
if (!RetrieveCPUExtendedLevelSupport (0x80000001)) return false;
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0x80000001 --> eax: CPU ID - bits 31..16 - unused, bits 15..12 - type, bits 11..8 - family, bits 7..4 - model, bits 3..0 - mask revision
; ebx: 31..24 - default APIC ID, 23..16 - logical processsor ID, 15..8 - CFLUSH chunk size , 7..0 - brand ID
; edx: CPU feature flags
mov eax,0x80000001
CPUID_INSTRUCTION
mov CPUExtendedFeatures, edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Retrieve the extended features of CPU present.
Features.ExtendedFeatures.Has3DNow = ((CPUExtendedFeatures & 0x80000000) != 0); // 3DNow Present --> Bit 31.
Features.ExtendedFeatures.Has3DNowPlus = ((CPUExtendedFeatures & 0x40000000) != 0); // 3DNow+ Present -- > Bit 30.
Features.ExtendedFeatures.HasSSEMMX = ((CPUExtendedFeatures & 0x00400000) != 0); // SSE MMX Present --> Bit 22.
Features.ExtendedFeatures.SupportsMP = ((CPUExtendedFeatures & 0x00080000) != 0); // MP Capable -- > Bit 19.
// Retrieve AMD specific extended features.
if (ChipManufacturer == AMD) {
Features.ExtendedFeatures.HasMMXPlus = ((CPUExtendedFeatures & 0x00400000) != 0); // AMD specific: MMX-SSE --> Bit 22
}
// Retrieve Cyrix specific extended features.
if (ChipManufacturer == Cyrix) {
Features.ExtendedFeatures.HasMMXPlus = ((CPUExtendedFeatures & 0x01000000) != 0); // Cyrix specific: Extended MMX --> Bit 24
}
return true;
}
bool __cdecl CPUInfo::RetrieveProcessorSerialNumber ()
{
int SerialNumber[3];
// Check to see if the processor supports the processor serial number.
if (!Features.HasSerial) return false;
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 3 --> ebx: top 32 bits are the processor signature bits --> NB: Transmeta only ?!?
; ecx: middle 32 bits are the processor signature bits
; edx: bottom 32 bits are the processor signature bits
mov eax, 3
CPUID_INSTRUCTION
mov SerialNumber[0 * TYPE int], ebx
mov SerialNumber[1 * TYPE int], ecx
mov SerialNumber[2 * TYPE int], edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Process the returned information.
sprintf (ChipID.SerialNumber, "%.2x%.2x-%.2x%.2x-%.2x%.2x-%.2x%.2x-%.2x%.2x-%.2x%.2x",
((SerialNumber[0] & 0xff000000) >> 24),
((SerialNumber[0] & 0x00ff0000) >> 16),
((SerialNumber[0] & 0x0000ff00) >> 8),
((SerialNumber[0] & 0x000000ff) >> 0),
((SerialNumber[1] & 0xff000000) >> 24),
((SerialNumber[1] & 0x00ff0000) >> 16),
((SerialNumber[1] & 0x0000ff00) >> 8),
((SerialNumber[1] & 0x000000ff) >> 0),
((SerialNumber[2] & 0xff000000) >> 24),
((SerialNumber[2] & 0x00ff0000) >> 16),
((SerialNumber[2] & 0x0000ff00) >> 8),
((SerialNumber[2] & 0x000000ff) >> 0));
return true;
}
bool __cdecl CPUInfo::RetrieveCPUPowerManagement ()
{
int CPUPowerManagement = 0;
// Check to see if what we are about to do is supported...
if (!RetrieveCPUExtendedLevelSupport (0x80000007)) {
Features.ExtendedFeatures.PowerManagement.HasFrequencyID = false;
Features.ExtendedFeatures.PowerManagement.HasVoltageID = false;
Features.ExtendedFeatures.PowerManagement.HasTempSenseDiode = false;
return false;
}
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0x80000007 --> edx: get processor power management
mov eax,0x80000007
CPUID_INSTRUCTION
mov CPUPowerManagement, edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Check for the power management capabilities of the CPU.
Features.ExtendedFeatures.PowerManagement.HasTempSenseDiode = ((CPUPowerManagement & 0x00000001) != 0);
Features.ExtendedFeatures.PowerManagement.HasFrequencyID = ((CPUPowerManagement & 0x00000002) != 0);
Features.ExtendedFeatures.PowerManagement.HasVoltageID = ((CPUPowerManagement & 0x00000004) != 0);
return true;
}
bool __cdecl CPUInfo::RetrieveExtendedCPUIdentity ()
{
int ProcessorNameStartPos = 0;
int CPUExtendedIdentity[12];
// Check to see if what we are about to do is supported...
if (!RetrieveCPUExtendedLevelSupport (0x80000002)) return false;
if (!RetrieveCPUExtendedLevelSupport (0x80000003)) return false;
if (!RetrieveCPUExtendedLevelSupport (0x80000004)) return false;
// Use assembly to detect CPUID information...
__try {
_asm {
#ifdef CPUID_AWARE_COMPILER
; we must push/pop the registers <<cpuid>> writes to, as the
; optimiser doesn't know about <<cpuid>>, and so doesn't expect
; these registers to change.
push eax
push ebx
push ecx
push edx
#endif
; <<cpuid>>
; eax = 0x80000002 --> eax, ebx, ecx, edx: get processor name string (part 1)
mov eax,0x80000002
CPUID_INSTRUCTION
mov CPUExtendedIdentity[0 * TYPE int], eax
mov CPUExtendedIdentity[1 * TYPE int], ebx
mov CPUExtendedIdentity[2 * TYPE int], ecx
mov CPUExtendedIdentity[3 * TYPE int], edx
; <<cpuid>>
; eax = 0x80000003 --> eax, ebx, ecx, edx: get processor name string (part 2)
mov eax,0x80000003
CPUID_INSTRUCTION
mov CPUExtendedIdentity[4 * TYPE int], eax
mov CPUExtendedIdentity[5 * TYPE int], ebx
mov CPUExtendedIdentity[6 * TYPE int], ecx
mov CPUExtendedIdentity[7 * TYPE int], edx
; <<cpuid>>
; eax = 0x80000004 --> eax, ebx, ecx, edx: get processor name string (part 3)
mov eax,0x80000004
CPUID_INSTRUCTION
mov CPUExtendedIdentity[8 * TYPE int], eax
mov CPUExtendedIdentity[9 * TYPE int], ebx
mov CPUExtendedIdentity[10 * TYPE int], ecx
mov CPUExtendedIdentity[11 * TYPE int], edx
#ifdef CPUID_AWARE_COMPILER
pop edx
pop ecx
pop ebx
pop eax
#endif
}
}
// A generic catch-all just to be sure...
__except (1) {
return false;
}
// Process the returned information.
memcpy (ChipID.ProcessorName, &(CPUExtendedIdentity[0]), sizeof (int));
memcpy (&(ChipID.ProcessorName[4]), &(CPUExtendedIdentity[1]), sizeof (int));
memcpy (&(ChipID.ProcessorName[8]), &(CPUExtendedIdentity[2]), sizeof (int));
memcpy (&(ChipID.ProcessorName[12]), &(CPUExtendedIdentity[3]), sizeof (int));
memcpy (&(ChipID.ProcessorName[16]), &(CPUExtendedIdentity[4]), sizeof (int));
memcpy (&(ChipID.ProcessorName[20]), &(CPUExtendedIdentity[5]), sizeof (int));
memcpy (&(ChipID.ProcessorName[24]), &(CPUExtendedIdentity[6]), sizeof (int));
memcpy (&(ChipID.ProcessorName[28]), &(CPUExtendedIdentity[7]), sizeof (int));
memcpy (&(ChipID.ProcessorName[32]), &(CPUExtendedIdentity[8]), sizeof (int));
memcpy (&(ChipID.ProcessorName[36]), &(CPUExtendedIdentity[9]), sizeof (int));
memcpy (&(ChipID.ProcessorName[40]), &(CPUExtendedIdentity[10]), sizeof (int));
memcpy (&(ChipID.ProcessorName[44]), &(CPUExtendedIdentity[11]), sizeof (int));
ChipID.ProcessorName[48] = '\0';
// Because some manufacturers (<cough>Intel) have leading white space - we have to post-process the name.
if (ChipManufacturer == Intel) {
for (int nCounter = 0; nCounter < CHIPNAME_STRING_LENGTH; nCounter ++) {
// There will either be NULL (\0) or spaces ( ) as the leading characters.
if ((ChipID.ProcessorName[nCounter] != '\0') && (ChipID.ProcessorName[nCounter] != ' ')) {
// We have found the starting position of the name.
ProcessorNameStartPos = nCounter;
// Terminate the loop.
break;
}
}
// Check to see if there is any white space at the start.
if (ProcessorNameStartPos == 0) return true;
// Now move the name forward so that there is no white space.
memmove (ChipID.ProcessorName, &(ChipID.ProcessorName[ProcessorNameStartPos]), (CHIPNAME_STRING_LENGTH - ProcessorNameStartPos));
}
return true;
}
bool _cdecl CPUInfo::RetrieveClassicalCPUIdentity ()
{
// Start by decided which manufacturer we are using....
switch (ChipManufacturer) {
case Intel:
// Check the family / model / revision to determine the CPU ID.
switch (ChipID.Family) {
case 3:
sprintf (ChipID.ProcessorName, "Newer i80386 family");
break;
case 4:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("i80486DX-25/33"); break;
case 1: STORE_CLASSICAL_NAME ("i80486DX-50"); break;
case 2: STORE_CLASSICAL_NAME ("i80486SX"); break;
case 3: STORE_CLASSICAL_NAME ("i80486DX2"); break;
case 4: STORE_CLASSICAL_NAME ("i80486SL"); break;
case 5: STORE_CLASSICAL_NAME ("i80486SX2"); break;
case 7: STORE_CLASSICAL_NAME ("i80486DX2 WriteBack"); break;
case 8: STORE_CLASSICAL_NAME ("i80486DX4"); break;
case 9: STORE_CLASSICAL_NAME ("i80486DX4 WriteBack"); break;
default: STORE_CLASSICAL_NAME ("Unknown 80486 family"); return false;
}
break;
case 5:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("P5 A-Step"); break;
case 1: STORE_CLASSICAL_NAME ("P5"); break;
case 2: STORE_CLASSICAL_NAME ("P54C"); break;
case 3: STORE_CLASSICAL_NAME ("P24T OverDrive"); break;
case 4: STORE_CLASSICAL_NAME ("P55C"); break;
case 7: STORE_CLASSICAL_NAME ("P54C"); break;
case 8: STORE_CLASSICAL_NAME ("P55C (0.25µm)"); break;
default: STORE_CLASSICAL_NAME ("Unknown Pentium® family"); return false;
}
break;
case 6:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("P6 A-Step"); break;
case 1: STORE_CLASSICAL_NAME ("P6"); break;
case 3: STORE_CLASSICAL_NAME ("Pentium® II (0.28 µm)"); break;
case 5: STORE_CLASSICAL_NAME ("Pentium® II (0.25 µm)"); break;
case 6: STORE_CLASSICAL_NAME ("Pentium® II With On-Die L2 Cache"); break;
case 7: STORE_CLASSICAL_NAME ("Pentium® III (0.25 µm)"); break;
case 8: STORE_CLASSICAL_NAME ("Pentium® III (0.18 µm) With 256 KB On-Die L2 Cache "); break;
case 0xa: STORE_CLASSICAL_NAME ("Pentium® III (0.18 µm) With 1 Or 2 MB On-Die L2 Cache "); break;
case 0xb: STORE_CLASSICAL_NAME ("Pentium® III (0.13 µm) With 256 Or 512 KB On-Die L2 Cache "); break;
default: STORE_CLASSICAL_NAME ("Unknown P6 family"); return false;
}
break;
case 7:
STORE_CLASSICAL_NAME ("Intel Merced (IA-64)");
break;
case 0xf:
// Check the extended family bits...
switch (ChipID.ExtendedFamily) {
case 0:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("Pentium® IV (0.18 µm)"); break;
case 1: STORE_CLASSICAL_NAME ("Pentium® IV (0.18 µm)"); break;
case 2: STORE_CLASSICAL_NAME ("Pentium® IV (0.13 µm)"); break;
default: STORE_CLASSICAL_NAME ("Unknown Pentium 4 family"); return false;
}
break;
case 1:
STORE_CLASSICAL_NAME ("Intel McKinley (IA-64)");
break;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown Intel family");
return false;
}
break;
case AMD:
// Check the family / model / revision to determine the CPU ID.
switch (ChipID.Family) {
case 4:
switch (ChipID.Model) {
case 3: STORE_CLASSICAL_NAME ("80486DX2"); break;
case 7: STORE_CLASSICAL_NAME ("80486DX2 WriteBack"); break;
case 8: STORE_CLASSICAL_NAME ("80486DX4"); break;
case 9: STORE_CLASSICAL_NAME ("80486DX4 WriteBack"); break;
case 0xe: STORE_CLASSICAL_NAME ("5x86"); break;
case 0xf: STORE_CLASSICAL_NAME ("5x86WB"); break;
default: STORE_CLASSICAL_NAME ("Unknown 80486 family"); return false;
}
break;
case 5:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("SSA5 (PR75, PR90, PR100)"); break;
case 1: STORE_CLASSICAL_NAME ("5k86 (PR120, PR133)"); break;
case 2: STORE_CLASSICAL_NAME ("5k86 (PR166)"); break;
case 3: STORE_CLASSICAL_NAME ("5k86 (PR200)"); break;
case 6: STORE_CLASSICAL_NAME ("K6 (0.30 µm)"); break;
case 7: STORE_CLASSICAL_NAME ("K6 (0.25 µm)"); break;
case 8: STORE_CLASSICAL_NAME ("K6-2"); break;
case 9: STORE_CLASSICAL_NAME ("K6-III"); break;
case 0xd: STORE_CLASSICAL_NAME ("K6-2+ or K6-III+ (0.18 µm)"); break;
default: STORE_CLASSICAL_NAME ("Unknown 80586 family"); return false;
}
break;
case 6:
switch (ChipID.Model) {
case 1: STORE_CLASSICAL_NAME ("Athlon™ (0.25 µm)"); break;
case 2: STORE_CLASSICAL_NAME ("Athlon™ (0.18 µm)"); break;
case 3: STORE_CLASSICAL_NAME ("Duron™ (SF core)"); break;
case 4: STORE_CLASSICAL_NAME ("Athlon™ (Thunderbird core)"); break;
case 6: STORE_CLASSICAL_NAME ("Athlon™ (Palomino core)"); break;
case 7: STORE_CLASSICAL_NAME ("Duron™ (Morgan core)"); break;
case 8:
if (Features.ExtendedFeatures.SupportsMP)
STORE_CLASSICAL_NAME ("Athlon™ MP (Thoroughbred core)");
else STORE_CLASSICAL_NAME ("Athlon™ XP (Thoroughbred core)");
break;
default: STORE_CLASSICAL_NAME ("Unknown K7 family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown AMD family");
return false;
}
break;
case Transmeta:
switch (ChipID.Family) {
case 5:
switch (ChipID.Model) {
case 4: STORE_CLASSICAL_NAME ("Crusoe TM3x00 and TM5x00"); break;
default: STORE_CLASSICAL_NAME ("Unknown Crusoe family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown Transmeta family");
return false;
}
break;
case Rise:
switch (ChipID.Family) {
case 5:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("mP6 (0.25 µm)"); break;
case 2: STORE_CLASSICAL_NAME ("mP6 (0.18 µm)"); break;
default: STORE_CLASSICAL_NAME ("Unknown Rise family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown Rise family");
return false;
}
break;
case UMC:
switch (ChipID.Family) {
case 4:
switch (ChipID.Model) {
case 1: STORE_CLASSICAL_NAME ("U5D"); break;
case 2: STORE_CLASSICAL_NAME ("U5S"); break;
default: STORE_CLASSICAL_NAME ("Unknown UMC family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown UMC family");
return false;
}
break;
case IDT:
switch (ChipID.Family) {
case 5:
switch (ChipID.Model) {
case 4: STORE_CLASSICAL_NAME ("C6"); break;
case 8: STORE_CLASSICAL_NAME ("C2"); break;
case 9: STORE_CLASSICAL_NAME ("C3"); break;
default: STORE_CLASSICAL_NAME ("Unknown IDT\\Centaur family"); return false;
}
break;
case 6:
switch (ChipID.Model) {
case 6: STORE_CLASSICAL_NAME ("VIA Cyrix III - Samuel"); break;
default: STORE_CLASSICAL_NAME ("Unknown IDT\\Centaur family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown IDT\\Centaur family");
return false;
}
break;
case Cyrix:
switch (ChipID.Family) {
case 4:
switch (ChipID.Model) {
case 4: STORE_CLASSICAL_NAME ("MediaGX GX, GXm"); break;
case 9: STORE_CLASSICAL_NAME ("5x86"); break;
default: STORE_CLASSICAL_NAME ("Unknown Cx5x86 family"); return false;
}
break;
case 5:
switch (ChipID.Model) {
case 2: STORE_CLASSICAL_NAME ("Cx6x86"); break;
case 4: STORE_CLASSICAL_NAME ("MediaGX GXm"); break;
default: STORE_CLASSICAL_NAME ("Unknown Cx6x86 family"); return false;
}
break;
case 6:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("6x86MX"); break;
case 5: STORE_CLASSICAL_NAME ("Cyrix M2 Core"); break;
case 6: STORE_CLASSICAL_NAME ("WinChip C5A Core"); break;
case 7: STORE_CLASSICAL_NAME ("WinChip C5B\\C5C Core"); break;
case 8: STORE_CLASSICAL_NAME ("WinChip C5C-T Core"); break;
default: STORE_CLASSICAL_NAME ("Unknown 6x86MX\\Cyrix III family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown Cyrix family");
return false;
}
break;
case NexGen:
switch (ChipID.Family) {
case 5:
switch (ChipID.Model) {
case 0: STORE_CLASSICAL_NAME ("Nx586 or Nx586FPU"); break;
default: STORE_CLASSICAL_NAME ("Unknown NexGen family"); return false;
}
break;
default:
STORE_CLASSICAL_NAME ("Unknown NexGen family");
return false;
}
break;
case NSC:
STORE_CLASSICAL_NAME ("Cx486SLC \\ DLC \\ Cx486S A-Step");
break;
default:
// We cannot identify the processor.
STORE_CLASSICAL_NAME ("Unknown family");
return false;
}
return true;
}
// --------------------------------------------------------
//
// Constructor Functions - CPUSpeed Class
//
// --------------------------------------------------------
CPUSpeed::CPUSpeed ()
{
unsigned int uiRepetitions = 1;
unsigned int uiMSecPerRepetition = 50;
__int64 i64Total = 0, i64Overhead = 0;
for (unsigned int nCounter = 0; nCounter < uiRepetitions; nCounter ++) {
i64Total += GetCyclesDifference (CPUSpeed::Delay, uiMSecPerRepetition);
i64Overhead += GetCyclesDifference (CPUSpeed::DelayOverhead, uiMSecPerRepetition);
}
// Calculate the MHz speed.
i64Total -= i64Overhead;
i64Total /= uiRepetitions;
i64Total /= uiMSecPerRepetition;
i64Total /= 1000;
// Save the CPU speed.
CPUSpeedInMHz = (int) i64Total;
}
CPUSpeed::~CPUSpeed ()
{
}
__int64 __cdecl CPUSpeed::GetCyclesDifference (DELAY_FUNC DelayFunction, unsigned int uiParameter)
{
unsigned int edx1, eax1;
unsigned int edx2, eax2;
// Calculate the frequency of the CPU instructions.
__try {
_asm {
push uiParameter ; push parameter param
mov ebx, DelayFunction ; store func in ebx
RDTSC_INSTRUCTION
mov esi, eax ; esi = eax
mov edi, edx ; edi = edx
call ebx ; call the delay functions
RDTSC_INSTRUCTION
pop ebx
mov edx2, edx ; edx2 = edx
mov eax2, eax ; eax2 = eax
mov edx1, edi ; edx2 = edi
mov eax1, esi ; eax2 = esi
}
}
// A generic catch-all just to be sure...
__except (1) {
return -1;
}
return (CPUSPEED_I32TO64 (edx2, eax2) - CPUSPEED_I32TO64 (edx1, eax1));
}
void CPUSpeed::Delay (unsigned int uiMS)
{
LARGE_INTEGER Frequency, StartCounter, EndCounter;
__int64 x;
// Get the frequency of the high performance counter.
if (!QueryPerformanceFrequency (&Frequency)) return;
x = Frequency.QuadPart / 1000 * uiMS;
// Get the starting position of the counter.
QueryPerformanceCounter (&StartCounter);
do {
// Get the ending position of the counter.
QueryPerformanceCounter (&EndCounter);
} while (EndCounter.QuadPart - StartCounter.QuadPart < x);
}
void CPUSpeed::DelayOverhead (unsigned int uiMS)
{
LARGE_INTEGER Frequency, StartCounter, EndCounter;
__int64 x;
// Get the frequency of the high performance counter.
if (!QueryPerformanceFrequency (&Frequency)) return;
x = Frequency.QuadPart / 1000 * uiMS;
// Get the starting position of the counter.
QueryPerformanceCounter (&StartCounter);
do {
// Get the ending position of the counter.
QueryPerformanceCounter (&EndCounter);
} while (EndCounter.QuadPart - StartCounter.QuadPart == x);
}
|
|
|
|
|
Thanks a lot hameduser  , I will check this ,hope this will solve my problem
Surendra Vishwkarma
|
|
|
|
|
Hi
Use xtreme toolkit can add a outlookbar to single doucment easily;
but I don't know how to add a outlookbar to multipe document?
how to do that?
could you give me a code?
Thanks!
|
|
|
|
|
Hi Everyone,
I'm writing an application that implements an on-screen keyboard (because the Windows on-screen keyboard is extremely small and hard to use) and I'm having problems setting focus to the desired window in which the user wishes to type.
I'm using a few User32 API calls to get the active window handle number and then set the active window once I know what the handle is. This seems to be working OK. However, the window which has focus (the one receiving the typing) flickers as the user clicks on a key.
This is because as the user touches a key to type, it gives the keyboard focus and then immediately sends focus back to the window in which the user is typing, hence the flickering. So...
Question #1:
How can I eliminate the change of focus and always give focus to the desired window so that there is no flickering back and forth between my keyboard application and the window receiving the typing?
Question #2:
This is not just a standalone keyboard, but is a small part of a larger piece of software. Consequently, there are occasions when the user must use this on-screen keyboard to type into a window within it's parent application or into different forms within the app. One form contains a browser control to a company website. When they keyboard is used to type into any text field on a webpage displayed in the browser control, only every other word is sent to that text box. Two key strokes are required to output one letter. What could be a possible cause of this and how might I go about fixing it?
ANY suggestions or help is much appreciated. Code examples in VB.NET, VB 2005, and C# are fine. C++ OK too but only if it's immediately applicable and can be converted easily to VB.NET.
Thanks in advance to anyone who contributes!!!!
Patrick
|
|
|
|
|
Have you tried keeping the active window as your onscreen keyboard, and using SendMessage or PostMessage with WM_KEYDOWN or WM_CHAR to send the appropriate keystrokes to the target window? Or SendInput?
VB.NET, what is that?
- S
50 cups of coffee and you know it's on!
|
|
|
|
|
Steve,
Thanks for the reply. I haven't tried that so I'll do some research today and give it a shot. Thank you much!
-Patrick
|
|
|
|
|
Hello,
BYTE pdest;
pdest += sizeof(DLGITEMTEMPLATE);
*(WORD*)pdest = 0xFFFF; // indicating atom value
pdest += sizeof(WORD);
*(WORD*)pdest = (USHORT)m_eTypeControl; // atom value for the control
pdest += sizeof(WORD);
Can you please explain me the syntax of the above code or give me the link
What does *(WORD*)pdest = 0xFFFF; mean ?
Thanks
Prithaa
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
