|
Hi there,
I'm in a bad situation I think.
I have to do something according to what icon has been set in my notifyicon1.
this is the way I have added the icon to the notifyIcon.
notifyIcon1.Icon = new Icon(GetType(),"red.ico");
I have to fire an event only when the icon is different from red.ico,
How can i do this?
The solution might be simple, but I just can't figure it out
looking forward to your response.
regards
Christian
|
|
|
|
|
The icon should only be used to show the user a status of an internal variable, not as a method of passing data from one part of your program to another. If the icon is red, it's because something else in your application set it that way. A better solution would be to set up a property in your app that sets a value that can be used elsewhere in your app and at the same time changes the icon to reflect the value of that property.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Store another variable elsewhere which tells you which icon is selected. This will also protect you against changes to the icon name, how it's stored, etc.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
I have been trying to scrape Web pages with code that includes the use of HttpWebRequest, then HttpWebResponse, and initially I am just sending the results to the console to be examined. Much sample code I have seen touts HttpWebRequest->HttpWebResponse as a quick, easy way to retrieve HTML from the internet.
What I have found is that this code retrieves only a certain amount of HTML at the beginning of each page, but not the whole thing (sometimes missing the code I need). Can anyone explain why this is? What sort of additional code would I add to repeat the request for data at the stopping point in order to get the rest of the page?
BluDvl90
|
|
|
|
|
This could be many things, such as not buffering the output correctly (never read-in the whole page at once - that's a bad idea) or using the wrong Encoding if you are buffering the whole output page.
Lets say you do buffer the whole page:
byte[] buffer = new byte[response.ContentLength];
response.Read(buffer, 0, buffer.Length); And then you use the wrong Encoding to read it. Lets say a Unicode (1-4 bytes per character) character set is returned but you assume ASCII:
string s = Encoding.ASCII.GetString(buffer); Only part of the page would be read because ASCII is 1 byte per character.
Instead, use the HttpWebResponse.ContentEncoding to get the right Encoding class:
Encoding enc = Encoding.GetEncoding(response.ContentEncoding);
string s = enc.GetString(buffer);
The easiest way is to create a StreamReader over the output using the right encoding. This will take care of any problems with buffering, even if you were to use StreamReader.ReadToEnd:
Encoding enc = Encoding.GetEncoding(response.ContentEncoding);
StreamReader reader = new StreamReader(response.GetResponseStream(), enc);
string line = null;
do
{
line = reader.ReadLine();
Console.WriteLine(line);
} while (line != null);
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Plz how do I invoke the shell command to run a DOS executable in C#
Tanx
|
|
|
|
|
To start another process from within C# you can used the Process[^] class.
You can use Process.Start();[^] to start a specific command.
Does this help?
"You can have everything in life you want if you will just help enough other people get what they want." --Zig Ziglar
The Second EuroCPian Event will be in Brussels on the 4th of September
Can't manage to P/Invoke that Win32 API in .NET? Why not do interop the wiki way!
My Blog
|
|
|
|
|
|
My first CP question! Gosh! 
This problem is driving me crazy because there is an itch in my brain saying that there has to be *some* way of doing it.
I have base class A, I derive Class B from class A.
Now in class A I have a method that I wish to output the type of the class that the current instance is.
Note: I can't use typeof(this) since I want to be able to use this with versions of A and/or B that include static members.
e.g.
public class A
{
A()
{
}
public static PrintType()
{
System.Type myType = System.Reflection.MethodBase.GetCurrentMethod().ReflectedType;
Debug.Print(myType.ToString());
}
}
public B : A
{
}
B.PrintType() should, in theory print B as the type... but it always prints A...
This is driving me crazy.. I'm sure there has to be some way for the base class to find out if a method is being called from a derived class in a way that's compatible with using statics (going the other way is a breeze) but I just can't seem to put my finger on it.
Any help greatly appreciated.
Thanks
joev
|
|
|
|
|
Just use this.GetType, which will give you the Type for the current instance. Compile and try the following example:
using System;
public class A
{
static void Main()
{
A a = new A();
Console.WriteLine(a.GetType());
a = new B();
Console.WriteLine(a.GetType());
}
}
public class B : A
{
}
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Ok,
To explain again, because I've obviously not been properly clear.
1. I am not *instansiating* Class B from A. I am trying to find the Type of object while calling a method from A that has not been overridden by derived class B.
e.g. If I call A.PrintType() I should get A, if I call B.PrintType(), without implementing PrintType() in the derived class B - i.e. I'm falling back to A.PrintType(), I want to get "B" as the output.
2. The solution must allow for use with statics... "this.GetType()" is right out.
I've been fiddling with all sorts of System.Reflection bits without success 
Any other ideas?
Cheers.
Joe.
|
|
|
|
|
And as I've just realised, this isn't possible at all with static members.
The compiler only emits the static member of the base class.
So therefore
B.PrintType()
is actually mapped directly to
A.PrintType()
in my example. Therefore PrintType can never know that it is being called from derived class B.
DOH. Back to the drawingboard.
Thanks anyway.
joe.
|
|
|
|
|
You should read a little more about polymorphism. Even if B doesn't override PrintType, this is still an instance of B.
Just modify the sample and you'll see:
using System;
public class A
{
static void Main()
{
A a = new A();
a.PrintType();
a = new B();
a.PrintType();
}
protected void PrintType()
{
Console.WriteLine(this.GetType());
}
}
public class B : A
{
}For statics, there is no this reference so you can't do it this way. It's this (which is implicit, so you don't need to type this) that is the correct Type.
Statics are defined on a particular Type and even if you used StackTrace you would see the static member called on the defining Type. Reflection won't help.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
You should read a little more about polymorphism. Even if B doesn't override PrintType, this is still an instance of B.
Sorry, I'm well aware of how polymorphism works thank you.
I was aware that your sample would work. My point was, it didn't answer my immediate question.
As I pointed out (and you subsequently re-iterated), of course what I was looking to do would not work in the context of statics since they are emitted once in the context of the declaring class.
I will instead approach the problem from a different angle.
Thanks
joev.
|
|
|
|
|
Hey there!
I have a problem with a Dialog in a textBox
I want to mark special lines in a different color. Is that possible or do i have to take a listBox? And if, then how is the code for changing single lines color!?
thanks
|
|
|
|
|
For a listbox, the color is for all text within the context. So that won't accomplish what you want to do. The textBox is the same. I would think that what you want to work with is a RichTextBox as your vehicle for text display. Then to set color your would do the following:
myRTB.Text = "some text\n\nsome more text\n"
myRTB.SelectedColor = Color.Red;
myRTB.SelectedText+= "colored text";
myRTB.Text += "end of message.\n"
I am just doing this off by memory, so you may need to do a bit of peeking at the Intellisense to get the correct selected field names. 
|
|
|
|
|
thanks a lot
|
|
|
|
|
I want to make a DLL (interface) of which many implementations are possible. Now after I create the class file do I have to compile,
and do I have give the using namespace in the beginning
and can I have the interface & it's implementation in the same project, or should it be different projects.
Thanx.
MaXx
|
|
|
|
|
Anything you create you should compile to build the assembly.
You can have the interface and implementation in the same project.
Using key word is used if you want to referenced any dlls and there onwards you want to access any classes.
Hope you understood.....
|
|
|
|
|
If you have the interface and the class in the same project then you defeat the purpose of the interface ... which is to be a portable representation of that implementation.
When you create your interface you would compile it.
In the classes that implement it, you would include reference to the DLL. I don't remember if I added the using statement, but a quick compile will answer that question for you. (If the compile says you are missing a using then add the using) ... my VS build is temporarily broken to get a specific answer, but creating reference, adding the interface implementation and then doing the compile is how you discover your own answers.
The major advantage to the use of interfaces is that I don't have to know what implementation I'm working with. So if I have an IAmFunky interface and there are 20 implementations. My system just has to refer to the implemenations via the interface IAmFunky myObject = new IAmFunky();
______________________________
The Tao gave birth to machine language.
Machine language gave birth to the assembler.
The assembler gave birth to ten thousand languages.
Each language has its purpose, however humble.
Each language expresses the Yin and Yang of software.
Each language has its place within the Tao.
Beauty exists because we give a name to C#.
Bad exists because we give a name to COBOL.
|
|
|
|
|
ok thanx bro..
but a little more..
here I go
Now I have made an interface called Inter Then I made its dll from the command line saying ...>csc /t: library Int.cs ten I made a class call Impl and implemented a function called fun (it just returns an integer) then when I run it through VS it ran but after I used using... and made an object of the interface.
fine..
Now I want to know if I can have more than one interface in a namespace, and is a namespace something like a package in Java.
And if I have classes divided in different namespaces, can I use them in one main class with the one main function? (ofcource I may have to use the using..)
.
Believe! Everything has a purpose
|
|
|
|
|
saud_a_k wrote:
can have more than one interface in a namespace
You can have as many interfaces inside a namespace as you want. There exists no restriction.
Namespace are used to group classes, interfaces, enumeration,... into different scopes which helps to logically organize your code. The Framework Class Library does the same, as it includes many namespaces which contain implementations for a specific area.
saud_a_k wrote:
And if I have classes divided in different namespaces, can I use them in one main class
Whether you can use the types created inside your namespace depends on their access modifier and nothing else. You dont't even have to insert a using namespace, cause this is mainly an easement so you can use your types without having to specify the namespace.
Take a look at the documentation for the using directive[^] and the namespace keyword[^].
www.troschuetz.de
|
|
|
|
|
so you mean namespaces are like packages in Java.. right?
MaXx
|
|
|
|
|
Yes, I would say it's mainly the same.
But I'm only a bloody beginner in Java, so I don't take this for granted
www.troschuetz.de
|
|
|
|
|
I seem to vaguely recall from my UML class that a java package is really comparable to a component. In .NET a component is a number of classes grouped together to form common functionality. A namespace represents a broader aspect which may have no true Java equivalency.
A standard for namespace standardization is:
companyName.{application}
in my company I established the standard that our namespace standard is:
companyName.groupName.application
The application namespace represents all elements, classes, methods, UI that represent that application. Within that application I may have a component (just a really large class) which is made up of several class libraries. An example is an SCCProviderClass. This provides a common interface to our source management providers with Source Safe, PVCS, and CVS supported in the backside. An interface (ISourcePackage) is the interface between my API and the individual API's.
For interface naming conventions you should also try to identify what you are interfacing (ComponentLibrary for example which is a library of common components) and then append I to that. (IComponentLibrary) which I believe is a common naming convention in Java as well.
______________________________
The Tao gave birth to machine language.
Machine language gave birth to the assembler.
The assembler gave birth to ten thousand languages.
Each language has its purpose, however humble.
Each language expresses the Yin and Yang of software.
Each language has its place within the Tao.
Beauty exists because we give a name to C#.
Bad exists because we give a name to COBOL.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
