|
Hi all,
Printing matter is greater than one page but when i generate the preview i can view only single page same problem for printing only single page is print.
i m use this also.
pInfo->m_bContinuePrinting=TRUE;
but after use this the problem still same,there is no effects.
please help he for this.
i waiting for your valuable suggestions and views.
thanks in advance.
IN A DAY, WHEN YOU DON'T COME ACROSS ANY PROBLEMS - YOU CAN BE SURE THAT YOU ARE TRAVELLING IN A WRONG PATH
|
|
|
|
|
u must be having a lot of data ,that cannot fit in a page ,so u need
to shift viewport origin using setviewportorigin() in OnPrepareDC method ...see msdn for more
info.......
best regards
|
|
|
|
|
Hello, it goes wrong again but I don't know where to make it right.
Last time the code that should be no wrong coz I builded it successfully just stuck in type conversion. I mean no pragma use or others. It just my fault that just uses the code without make suitable type.
Now I make my own project that uses bitmap. Finally, I've build it successfully and the compiled result's shown below.
====================================================================================================
------ Rebuild All started: Project: KungfuPanda, Configuration: Debug Win32 ------
Deleting intermediate and output files for project 'KungfuPanda', configuration 'Debug|Win32'
Compiling...
PO.cpp
c:\program files\microsoft sdks\windows\v6.0a\include\gl\glaux.h(17) : warning C4068: unknown pragma
c:\program files\microsoft sdks\windows\v6.0a\include\gl\glaux.h(374) : warning C4068: unknown pragma
c:\documents and settings\satellite\my documents\visual studio 2008\projects\vc++ project\kungfupanda\kungfupanda\po.cpp(33) : warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
c:\program files\microsoft visual studio 9.0\vc\include\stdio.h(237) : see declaration of 'fopen'
Compiling manifest to resources...
Microsoft (R) Windows (R) Resource Compiler Version 6.0.5724.0
Copyright (C) Microsoft Corporation. All rights reserved.
Linking...
LINK : C:\Documents and Settings\SATELLITE\My Documents\Visual Studio 2008\Projects\VC++ PROJECT\KungfuPanda\Debug\KungfuPanda.exe not found or not built by the last incremental link; performing full link
Embedding manifest...
Microsoft (R) Windows (R) Resource Compiler Version 6.0.5724.0
Copyright (C) Microsoft Corporation. All rights reserved.
Build log was saved at "file://c:\Documents and Settings\SATELLITE\My Documents\Visual Studio 2008\Projects\VC++ PROJECT\KungfuPanda\KungfuPanda\Debug\BuildLog.htm"
KungfuPanda - 0 error(s), 3 warning(s)
========== Rebuild All: 1 succeeded, 0 failed, 0 skipped ==========
=====================================================================================================
This make me very happy, coz this is my first project but something bad appear while I start debuging.
It just like before, I mean while the windows form appear "would you like to run in fullscreen mode", whether I choose yes or no, it just start the appearence then disappear in seconds. Maybe in milliseconds.
What cause this problem. For every one who knows this case, please tell me. How to prevent the result not to disappear while it just start running ? A comment would be a real help.
Here's the debugging log
===================================================================================================
'KungfuPanda.exe': Loaded 'C:\Documents and Settings\SATELLITE\My Documents\Visual Studio 2008\Projects\VC++ PROJECT\KungfuPanda\Debug\KungfuPanda.exe', Symbols loaded.
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\ntdll.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\kernel32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\glu32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\msvcrt.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\opengl32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\advapi32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\rpcrt4.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\gdi32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\user32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\ddraw.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\dciman32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.VC90.DebugCRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_597c3456\msvcr90d.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\imm32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\lpk.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\usp10.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\avgrsstx.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\uxtheme.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\MSCTF.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\version.dll'
'KungfuPanda.exe': Unloaded 'C:\WINDOWS\system32\version.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\MSCTFIME.IME'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\ole32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\oleaut32.dll'
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\iglicd32.dll', Binary was not built with debug information.
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\igldev32.dll', Binary was not built with debug information.
'KungfuPanda.exe': Loaded 'C:\WINDOWS\system32\mcd32.dll'
'KungfuPanda.exe': Unloaded 'C:\WINDOWS\system32\mcd32.dll'
The program '[896] KungfuPanda.exe: Native' has exited with code 0 (0x0).
===================================================================================================
This is my first project code; If I run it should be a rotating box that contain Po bitmap.
====================================================================================================
#include <windows.h>
#include <stdio.h>
#include <gl\gl.h>
#include <gl\glu.h>
#include <gl\glaux.h>
HDC hDC=NULL;
HGLRC hRC=NULL;
HWND hWnd=NULL;
HINSTANCE hInstance;
bool keys[256];
bool active=TRUE;
bool fullscreen=TRUE;
GLfloat xrot;
GLfloat yrot;
GLfloat zrot;
GLuint texture[1];
LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM);
AUX_RGBImageRec *LoadBMP(char *Filename)
{
FILE *File=NULL;
if (!Filename)
{
return NULL;
}
File=fopen(Filename,"r");
if (File)
{
fclose(File);
return auxDIBImageLoad(Filename);
}
return NULL;
}
int LoadGLTextures()
{
int Status=FALSE;
AUX_RGBImageRec *TextureImage[1];
memset(TextureImage,0,sizeof(void *)*1);
if (TextureImage[0]=LoadBMP("Data/DragonWarrior.bmp"))
{
Status=TRUE;
glGenTextures(1, &texture[0]);
glBindTexture(GL_TEXTURE_2D, texture[0]);
glTexImage2D(GL_TEXTURE_2D, 0, 3, TextureImage[0]->sizeX, TextureImage[0]->sizeY, 0, GL_RGB, GL_UNSIGNED_BYTE, TextureImage[0]->data);
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR);
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR);
}
if (TextureImage[0])
{
if (TextureImage[0]->data)
{
free(TextureImage[0]->data);
}
free(TextureImage[0]);
}
return Status;
}
GLvoid ReSizeGLScene(GLsizei width, GLsizei height)
{
if (height==0)
{
height=1;
}
glViewport(0,0,width,height);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
// Calculate The Aspect Ratio Of The Window
gluPerspective(45.0f,(GLfloat)width/(GLfloat)height,0.1f,100.0f);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
}
int InitGL(GLvoid)
{
if (!LoadGLTextures())
{
return FALSE;
}
glEnable(GL_TEXTURE_2D);
glShadeModel(GL_SMOOTH);
glClearColor(0.0f, 0.0f, 0.0f, 0.5f);
glClearDepth(1.0f);
glEnable(GL_DEPTH_TEST);
glDepthFunc(GL_LEQUAL);
glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST);
return TRUE;
}
int DrawGLScene(GLvoid)
{
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glLoadIdentity();
glTranslatef(0.0f,0.0f,-5.0f);
glRotatef(xrot,1.0f,0.0f,0.0f);
glRotatef(yrot,0.0f,1.0f,0.0f);
glRotatef(zrot,0.0f,0.0f,1.0f);
glBindTexture(GL_TEXTURE_2D, texture[0]);
glBegin(GL_QUADS);
// muka depan
glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f, -1.0f, 1.0f);
glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f, -1.0f, 1.0f);
glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 1.0f);
glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 1.0f);
// muka belakang
glTexCoord2f(1.0f, 0.0f); glVertex3f(-1.0f, -1.0f, -1.0f);
glTexCoord2f(1.0f, 1.0f); glVertex3f(-1.0f, 1.0f, -1.0f);
glTexCoord2f(0.0f, 1.0f); glVertex3f( 1.0f, 1.0f, -1.0f);
glTexCoord2f(0.0f, 0.0f); glVertex3f( 1.0f, -1.0f, -1.0f);
// muka atas
glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, -1.0f);
glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f, 1.0f, 1.0f);
glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f, 1.0f, 1.0f);
glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, -1.0f);
// muka bawah
glTexCoord2f(1.0f, 1.0f); glVertex3f(-1.0f, -1.0f, -1.0f);
glTexCoord2f(0.0f, 1.0f); glVertex3f( 1.0f, -1.0f, -1.0f);
glTexCoord2f(0.0f, 0.0f); glVertex3f( 1.0f, -1.0f, 1.0f);
glTexCoord2f(1.0f, 0.0f); glVertex3f(-1.0f, -1.0f, 1.0f);
// muka kanan
glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f, -1.0f, -1.0f);
glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, -1.0f);
glTexCoord2f(0.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 1.0f);
glTexCoord2f(0.0f, 0.0f); glVertex3f( 1.0f, -1.0f, 1.0f);
// muka kiri
glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f, -1.0f, -1.0f);
glTexCoord2f(1.0f, 0.0f); glVertex3f(-1.0f, -1.0f, 1.0f);
glTexCoord2f(1.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 1.0f);
glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, -1.0f);
glEnd();
xrot+=0.3f;
yrot+=0.2f;
zrot+=0.4f;
return TRUE;
}
GLvoid KillGLWindow(GLvoid)
{
if (fullscreen)
{
ChangeDisplaySettings(NULL,0);
ShowCursor(TRUE);
}
if (hRC)
{
if (!wglMakeCurrent(NULL,NULL))
{
MessageBox(NULL,"Release Of DC And RC Failed.","SHUTDOWN ERROR",MB_OK | MB_ICONINFORMATION);
}
if (!wglDeleteContext(hRC))
{
MessageBox(NULL,"Release Rendering Context Failed.","SHUTDOWN ERROR",MB_OK | MB_ICONINFORMATION);
}
hRC=NULL;
}
if (hDC && !ReleaseDC(hWnd,hDC))
{
MessageBox(NULL,"Release Device Context Failed.","SHUTDOWN ERROR",MB_OK | MB_ICONINFORMATION);
hDC=NULL;
}
if (hWnd && !DestroyWindow(hWnd))
{
MessageBox(NULL,"Could Not Release hWnd.","SHUTDOWN ERROR",MB_OK | MB_ICONINFORMATION);
hWnd=NULL;
}
if (!UnregisterClass("OpenGL",hInstance))
{
MessageBox(NULL,"Could Not Unregister Class.","SHUTDOWN ERROR",MB_OK | MB_ICONINFORMATION);
hInstance=NULL;
}
}
BOOL CreateGLWindow(char* title, int width, int height, int bits, bool fullscreenflag)
{
GLuint PixelFormat;
WNDCLASS wc;
DWORD dwExStyle;
DWORD dwStyle;
RECT WindowRect;
WindowRect.left=(long)0;
WindowRect.right=(long)width;
WindowRect.top=(long)0;
WindowRect.bottom=(long)height;
fullscreen=fullscreenflag;
hInstance = GetModuleHandle(NULL);
wc.style = CS_HREDRAW | CS_VREDRAW | CS_OWNDC;
wc.lpfnWndProc = (WNDPROC) WndProc;
wc.cbClsExtra = 0;
wc.cbWndExtra = 0;
wc.hInstance = hInstance;
wc.hIcon = LoadIcon(NULL, IDI_WINLOGO);
wc.hCursor = LoadCursor(NULL, IDC_ARROW);
wc.hbrBackground = NULL;
wc.lpszMenuName = NULL;
wc.lpszClassName = "OpenGL";
if (!RegisterClass(&wc))
{
MessageBox(NULL,"Failed To Register The Window Class.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
if (fullscreen)
{
DEVMODE dmScreenSettings;
memset(&dmScreenSettings,0,sizeof(dmScreenSettings));
dmScreenSettings.dmSize=sizeof(dmScreenSettings);
dmScreenSettings.dmPelsWidth = width;
dmScreenSettings.dmPelsHeight = height;
dmScreenSettings.dmBitsPerPel = bits;
dmScreenSettings.dmFields=DM_BITSPERPEL|DM_PELSWIDTH|DM_PELSHEIGHT;
if (ChangeDisplaySettings(&dmScreenSettings,CDS_FULLSCREEN)!=DISP_CHANGE_SUCCESSFUL)
{
if (MessageBox(NULL,"The Requested Fullscreen Mode Is Not Supported By\nYour Video Card. Use Windowed Mode Instead?","NeHe GL",MB_YESNO|MB_ICONEXCLAMATION)==IDYES)
{
fullscreen=FALSE;
}
else
{
MessageBox(NULL,"Program Will Now Close.","ERROR",MB_OK|MB_ICONSTOP);
return FALSE;
}
}
}
if (fullscreen)
{
dwExStyle=WS_EX_APPWINDOW;
dwStyle=WS_POPUP;
ShowCursor(FALSE);
}
else
{
dwExStyle=WS_EX_APPWINDOW | WS_EX_WINDOWEDGE;
dwStyle=WS_OVERLAPPEDWINDOW;
}
AdjustWindowRectEx(&WindowRect, dwStyle, FALSE, dwExStyle);
// Create The Window
if (!(hWnd=CreateWindowEx( dwExStyle,
"OpenGL",
title,
dwStyle |
WS_CLIPSIBLINGS |
WS_CLIPCHILDREN,
0, 0,
WindowRect.right-WindowRect.left,
WindowRect.bottom-WindowRect.top,
NULL,
NULL,
hInstance,
NULL)))
{
KillGLWindow();
MessageBox(NULL,"Window Creation Error.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
static PIXELFORMATDESCRIPTOR pfd=
{
sizeof(PIXELFORMATDESCRIPTOR),
1,
PFD_DRAW_TO_WINDOW |
PFD_SUPPORT_OPENGL |
PFD_DOUBLEBUFFER,
PFD_TYPE_RGBA,
bits,
0, 0, 0, 0, 0, 0,
0,
0,
0,
0, 0, 0, 0,
16,
0,
0,
PFD_MAIN_PLANE,
0,
0, 0, 0
};
if (!(hDC=GetDC(hWnd)))
{
KillGLWindow();
MessageBox(NULL,"Can't Create A GL Device Context.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
if (!(PixelFormat=ChoosePixelFormat(hDC,&pfd)))
{
KillGLWindow();
MessageBox(NULL,"Can't Find A Suitable PixelFormat.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
if(!SetPixelFormat(hDC,PixelFormat,&pfd))
{
KillGLWindow();
MessageBox(NULL,"Can't Set The PixelFormat.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
if (!(hRC=wglCreateContext(hDC)))
{
KillGLWindow();
MessageBox(NULL,"Can't Create A GL Rendering Context.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
if(!wglMakeCurrent(hDC,hRC))
{
KillGLWindow();
MessageBox(NULL,"Can't Activate The GL Rendering Context.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
ShowWindow(hWnd,SW_SHOW);
SetForegroundWindow(hWnd);
SetFocus(hWnd);
ReSizeGLScene(width, height);
if (!InitGL())
{
KillGLWindow();
MessageBox(NULL,"Initialization Failed.","ERROR",MB_OK|MB_ICONEXCLAMATION);
return FALSE;
}
return TRUE;
}
LRESULT CALLBACK WndProc( HWND hWnd,
UINT uMsg,
WPARAM wParam,
LPARAM lParam)
{
switch (uMsg)
{
case WM_ACTIVATE:
{
if (!HIWORD(wParam))
{
active=TRUE;
}
else
{
active=FALSE;
}
return 0;
}
case WM_SYSCOMMAND:
{
switch (wParam)
{
case SC_SCREENSAVE:
case SC_MONITORPOWER:
return 0;
}
break;
}
case WM_CLOSE:
{
PostQuitMessage(0);
return 0;
}
case WM_KEYDOWN:
{
keys[wParam] = TRUE;
return 0;
}
case WM_KEYUP:
{
keys[wParam] = FALSE;
return 0;
}
case WM_SIZE:
{
ReSizeGLScene(LOWORD(lParam),HIWORD(lParam));
return 0;
}
}
return DefWindowProc(hWnd,uMsg,wParam,lParam);
}
int WINAPI WinMain( HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nCmdShow)
{
MSG msg;
BOOL done=FALSE;
if (MessageBox(NULL,"Would You Like To Run In Fullscreen Mode?", "Start FullScreen?",MB_YESNO|MB_ICONQUESTION)==IDNO)
{
fullscreen=FALSE;
}
if (!CreateGLWindow("NeHe's Texture Mapping Tutorial",640,480,16,fullscreen))
{
return 0;
}
while(!done)
{
if (PeekMessage(&msg,NULL,0,0,PM_REMOVE))
{
if (msg.message==WM_QUIT)
{
done=TRUE;
}
else
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
}
else
{
if ((active && !DrawGLScene()) || keys[VK_ESCAPE])
{
done=TRUE;
}
else
{
SwapBuffers(hDC);
}
if (keys[VK_F1])
{
keys[VK_F1]=FALSE;
KillGLWindow();
fullscreen=!fullscreen;
// Recreate Our OpenGL Window
if (!CreateGLWindow("NeHe's Texture Mapping Tutorial",640,480,16,fullscreen))
{
return 0;
}
}
}
}
KillGLWindow();
return (msg.wParam);
}
==================================================================================================
I'm really confused now coz I'm a newbie for this
<div class="ForumMod">modified on Saturday, November 22, 2008 12:53 AM</div>
|
|
|
|
|
sen pao wrote: A comment would be a real help. Please try to compile and run the code to see what's going on.
While you may get lucky, it's doubtful that you'll get any takers on this. You need to narrow the problem down to a small handful of relevant lines and then start asking specific questions. As is it right now, most folks will just ignore this big bunch of code.
"Love people and use things, not love things and use people." - Unknown
"The brick walls are there for a reason...to stop the people who don't want it badly enough." - Randy Pausch
|
|
|
|
|
I'm so sorry coz this is my first post. I just in hurry and then copy paste my problem to this thread. Please help me. I can't solve it.
|
|
|
|
|
Hi,
I am new to Visual C++/.Net, I have a simple question. I have a DatePickerTime object which I need to display future date in days (i.e. if you pick 11/21/2009, I will display 365 days).
I have managed to compute my 365 days but I am not able to assign the char* to the label Text
i.e. Sysytem::String ^
Can anyone help me? Thanks in advance
|
|
|
|
|
Label->Text = days->ToString();
By the way there is a separate forum for Managed C++.
-Saurabh
|
|
|
|
|
Thanks, but this does not work. I need to compute the numeric day toString() gives me 11/22/2009 but I need 365.
|
|
|
|
|
But you mentioned that you were able to compute the number of days from date time. You can also try Convert::ToInt32(str);
-Saurabh
|
|
|
|
|
Hi,
I recently upgraded several MFC projects at work from Visual Studio 2005 to 2008. However, when I distribute the recompiled executables with the new Studio 2008 DLL's, I'm getting the "configuration error" that always comes up when dlls/dependencies/manifests are wrong/missing. Looking at the binary, I see that two of my apps are depending on a previous version of MFC90.dll, but the MFC.manifest file is pointing to the latest version. I'm thinking that this is causing the error, but my question is, how do I get my apps to compile/depend on the same version of the dll that the manifest is pointing to?
Thanks!
KR
|
|
|
|
|
|
Hi,
My application serializes objects to disk but the files do not appear to contain the schema number - just my data. My class is derrived from CObject and uses the DECLARE_SERIAL and IMPLEMENT_SERIAL macros but the very first data member I serialise is a class which does not use the macros. Could this be the reason.
I need to add more data members to my class and the files that have already been written contain very important data so there is no possibility of me starting again.
Can anybody give me any advice what to do?
Thanks
|
|
|
|
|
You didn't use VERSIONABLE_SCHEMA or add your own versioning to
your serialization?
Mark Salsbery
Microsoft MVP - Visual C++
![Java | [Coffee]](https://www.codeproject.com/script/Forums/Images/coffee.gif)
|
|
|
|
|
Could someone familiar with AVI please explain to me why I need to run a timer to execute AVI procedure callback?
In CView derived class I successfuky create (class.Create) AVI frame grabber ( in OnInitialUpdate). In Create I successfuky execute capSetCallbackOnFrame - passing callback procedure.
This procedure will not execute unless I set a timer during the frame creation.
( My is set to 1 ms.)
I have read the documentation and it does not say anything about any delay necessary after the capSetCallbackOnFrame is executed during the frame setup.
Thanks for reading.
Any constructive comments are appreciated.
Cheers Vaclav
Addendum:
It is getting even more confusing - the callback procedure runs after
capGrabFrameNoStop is executed - in my timer function.
I thought that capSetCallbackOnFrame does the "calling" of the callback procedure.
Back to reading documentation.
And the documetation saiz - there is a difference between CAPSTATUS and CAPTUREPARMS !
<div class="ForumMod">modified on Monday, November 24, 2008 11:35 AM</div>
|
|
|
|
|
If you are streaming, then the frame callback doesn't get called.
You need to use the stream callback instead.
You shouldn't need a timer - VFW will call your callback on its own thread(s).
Mark
Mark Salsbery
Microsoft MVP - Visual C++
![Java | [Coffee]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/coffee.gif)
|
|
|
|
|
Mark,
I am making progrees but still have some dumb questions.
After I create the AVI frame I initialize the video driver, preview and get status.
In CAPSTATUS I see an entry fLiveWindow and I think I want it to be true, but default is false.
Is seems that "streaming" is burried in these CAPSTATUS variables.
But I cannot set the status and the documetation saiz that it is "dynamic".
I think I am missing the actual start of video capture but I can get the preview - one frame - just fine and get the callback to work when capGrabFrameNoStop is executed.
But accoring to the doc the callback shoul also work "directly" from preview.
Thanks for your help.
Vaclav
|
|
|
|
|
Hi everyone.
I've made a working thread that interact with a window by user-defined messages (WM_USER + x).
I would like use WPARAM and/or LPARAM to give to the window objects allocated in the working thread.
In few words, I would like obtain the same result that the Windows achieve with message like WM_CREATE (LPARAM is a pointer to a structure).
I know that the object I want pass through the message must be deallocated and I've tried to use the SendMessageCallback function, but the callback user-defined function is called only if GetMessage, PeekMessage or WaitMessage are called by the same thread (MSDN docet).
Anyone can help me?
Thanks a lot,
Sergio
|
|
|
|
|
That's a tricky one. Maybe you can solve it by using PostMessage and having the message handling end do the delete but if the allocation was on a different thread this might be dangerous.
Can you use two messages, one to tell the Window end to allocate a structure, write a pointer to it at a specified address and then set an Event and the second, triggered in the secondary thread by the event, to tell the Window that structure has been filled in.
Kind of like:-
Window Thread Secondary Thread
Set up a pointer pStruct
Post a msg to the Window with pStruct
Wait on a shared event
Recieve msg with &pStruct
pStruct = new Struct
Set Shared Event
pStruct is now allocated so fill it
SendMessage to Window
Recieve msg<--------------------------
Process and delete pStruct----------->Secondary Thread continues
Perhaps that's over complicated and all you need is PostMessage but I've struggled with a few of these in the past.
Watch it when your controls are being destroyed that you don't leak allocations that havn't been used yet.
"The secret of happiness is freedom, and the secret of freedom, courage."
Thucydides (B.C. 460-400)
|
|
|
|
|
I might be missing something here, but what stops you from doing something like this:
FOOBAR *pData = new FOOBAR();
SendMessage( hWnd, WM_DO_FOOBAR_THING, (WPARAM)pData, NULL );
delete pData;
--
gleat
http://blogorama.nerdworks.in[ ^]
-- Number Two's eyes narrowed and became what are known in the Shouting and Killing People trade as cold slits, the idea presumably being to give your opponent the impression that you have lost your glasses or are having difficulty keeping awake. Why this is frightening is an, as yet, unresolved problem. -- HHGTG
|
|
|
|
|
Ummm, I don't see what the problem is.... 
You don't say anything about what you've tried so far and how it fails, it looks to be more of a design question...
Atropus wrote: I've made a working thread that interact with a window by user-defined messages (WM_USER + x)
Quite all right, as long as you use PostMessage() and not SendMessage() to avoid a deadlock situation. But you should not use WM_USER; at least use WM_APP.
What you really should do is use registered messages.
Read this[^].
Atropus wrote: I would like use WPARAM and/or LPARAM to give to the window objects allocated in the working thread.
This should in most cases be fine as well, depending on what type of object you're allocating. Read the article linked to above.
It could be dangerous if it's an MFC object since MFC classes wraps objects like e.g. windows and sockets that are referred to through a handle and the MFC object handle map is on per thread basis.
But if it really is an MFC object your trying to pass you should re-evaluate your design because you'll get into troubles sooner or later.
Atropus wrote: I know that the object I want pass through the message must be deallocated and I've tried to use the SendMessageCallback function
Deallocate the object in the message handler.
The only danger you'll expose yourself to is a memory leak if the message for some reason should not be handled. But if that happens the memory leak would be the least of your problems.
You should really read this article[^] before continuing with your worker thread.
It's the best introduction to worker threads I've come across.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
I have the following:
CFileDialog dlg(FALSE,"for",Filename,OFN_CREATEPROMPT | OFN_HIDEREADONLY |OFN_OVERWRITEPROMPT |OFN_PATHMUSTEXIST ,
"New Format (*.fr)|*.fr| Oldformat (*.fr)|*.fr||",this);
which will create two options on the drop down choice, How can I flag between the two options when the files have the same extension (.fr) in this case? Does this class have a member that will let me know which choice is selected?
Thanks
|
|
|
|
|
Are you referring to the nFilterIndex member (of OPENFILENAME)?
"Love people and use things, not love things and use people." - Unknown
"The brick walls are there for a reason...to stop the people who don't want it badly enough." - Randy Pausch
|
|
|
|
|
|
As a general user interface design principle, it is probably not a good idea to make the user determine whether the file is in the "new" format or not. Can you not simply have one entry for "*.fr" files and programmatically figure out whether it is new or old?
--
gleat
http://blogorama.nerdworks.in[ ^]
-- Number Two's eyes narrowed and became what are known in the Shouting and Killing People trade as cold slits, the idea presumably being to give your opponent the impression that you have lost your glasses or are having difficulty keeping awake. Why this is frightening is an, as yet, unresolved problem. -- HHGTG
|
|
|
|
|
I don't think its quite possible in my case. The problem is between sharing files between new application that uses (Serializes new variables)and users who still have the old applications (They cannot open new serialized files).
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
