C / C++ / MFC

FirstPrevNext

How to view resultset in data grid sailesh17-Jun-02 1:54 sailesh 17-Jun-02 1:54  Hi everybody, I have a typical problem here. I am developing a database oriented application in vc++ using MFC and i need to generate a lot of reports for the application. How do i display them properly in a proper format. Please note i don't connect directly to the database but via a server application. I get the result of the query from the server and now i want to display the results in a grid format in the client. Is there any way of displaying the resultset in a Microsoft DataGrid directly through code without connecting to the database. Thanks in advance. Regards Sailesh Re: How to view resultset in data grid Renjith Ramachandran17-Jun-02 5:12 Renjith Ramachandran 17-Jun-02 5:12  Heyyyyy Dont be THink like soooo..Never be think like the DAtabase control In VB.. If u want to show the recordset in the client.just use the ListControl in report View...and that is a nice interface...i think someone sumbitted here sme clasess in which u can directly printout from there.. orif u want professional stypeReport..use Seagate Crystal Report 8.0 that s a nice tool ... R_Renjith The CPian Display Resultset in a Grid control without connecting directly to the database 17-Jun-02 1:49 17-Jun-02 1:49  Hi everybody, I have a typical problem here. I am developing a database oriented application in vc++ using MFC and i need to generate a lot of reports for the application. How do i display them properly in a proper format. Please note i don't connect directly to the database but via a server application. I get the result of the query from the server and now i want to display the results in a grid format in the client. Is there any way of displaying the resultset in a Microsoft DataGrid directly through code without connecting to the database. Thanks in advance. Regards Sailesh Projects in VC++ 17-Jun-02 1:20 17-Jun-02 1:20  Hi All... Pls help me..I am doing MCA and I want to do the Projects in VC++..Time for doing the Project is only 3 months.Can any one Suggest me a very good topic for my Project that can be either System side or Application based.. Thanks in Advance!!!! Re: Projects in VC++ 17-Jun-02 5:07 17-Jun-02 5:07  You can do some client/Server Application. like the Remote Admin / voice Chat . i think that s suit for ur need ..Always remember abt the time limit to submit ur project When u design.. make nice even if it is a small one.. Remember :it is a MesageBoard always talk abt the doubts about the developments and related stuffs..always search in the available topics before submiting this type of request here.. R_Renjith The True CP ian Dynamic Picture Box Creation Paul Silvernail17-Jun-02 1:17 Paul Silvernail 17-Jun-02 1:17  I am creating a color table dialog and would like to dynamically create some picture boxes of type RECTANGLE. Using the dialog properties dialog box, you can select from Frame, Rectangle, Bitmap, Metafile, and Icon. Using CPictureHolder allows creation of Bitmap, Metafile, and Icon only! I have tried the following in my OnInitDialog()thinking that an empty picture holder would be a rectangle. No such luck! // Create static rectangle CPictureHolder PH; PH.CreateEmpty(); CRect rcRender(20,20,100,100); CRect rcWBounds; GetClientRect(rcWBounds); PH.Render(GetDC(), rcRender, rcWBounds); I would simply draw rectangles except I want to add each picture box to a CToolTipCtrl so the color name is displayed. Any help would be appreciated. Thanks Re: Dynamic Picture Box Creation 17-Jun-02 2:41 17-Jun-02 2:41  On my way in to work I realized I have a variable scope problem and need to make the CPictureHolder object a member variable. I am still interested in any input. Paul <) (Dunce Cap) CRichEditCtrl Scrolling Problem Miguel Fonseca17-Jun-02 1:18 Miguel Fonseca 17-Jun-02 1:18  I use Visual C++ 6.0. I need to put a CRichEditCtrl and a centimeter ruler bar in a CWnd. The goal is that CWnd can appear anywhere in a dialog box to let user introduce formatted text using the ruler. It should work like a control. My problem is that when my CWnd receives EN_HSCROLL notifications from CRichEditCtrl and get the values obtained from GetScrollInfo(), the values seem to me meaningless and I can't scroll my ruler accordingly. Suppose for instance I have the following CWnd metrics: a) client area width = 728 pixels (from 0 to 728) b) rich edit client area width = 726 (728 minus the two borders?) c) rich edit rect (SetRect) left = 21 d) rich edit rect (SetRect) right = 728 When the user type one more character after the most right position, CRichEditCtrl send the first EN_HSCROLL notification. When I get the values from GetScrollInfo() they are the following: nMin=0 // ok nMax=708 // why? (perhaps 728 - 21 = 707 plus one?) nPage=706 // why? nPos=3 // why? this for me is the most strange value nTrackPos=3 // why? idem I get also the caret position through GetCaretPos(). The value of x coordinate is 501. So the jump was from 728 (perhaps the last valid caret pos) to 501. This is a big jump! Why nPos only hace 3? Suppose that after the jump, the user type more characters and a second jump occurs. Now the values are: nMin=0 // ok nMax=714 // why the maximum is not fixed? nPage=706 // the same value... nPos=9 // why? continue to be a strange value... nTrackPos=9 // idem I don't remember the caret position in this turn but the problem remains. How can I get the real jump of the scroll bar to scroll my ruler accordingly with the text in CRichEditCtrl? With the information of nPos it seems to be impossible. I tried to understand the source code for WordPad but this is very, very confused because is not object-oriented and the ruler class, for instance, depends on many variables spread in other classes. Although this, the code of scrolling is simple. The WordPad application in OnUpdateCmdUI() uses GetScrollPos() and pass it to the ruler. In my code I tried the same thing but the things don't work, also because I don't have the OnUpdateCmdUI() function. So, my ruler scrolls less than the real jump. This is the problem I have to solve. Miguel Fonseca miguel.fonseca@xerus.pt COM and Exceptions Perry Bruins17-Jun-02 1:21 Perry Bruins 17-Jun-02 1:21  Hi All, I am currently working on a XML interface to my application. I have implemented this as a COM interface, usable from within any language such as VBS, C/C++, etc. The problem is that some customers ask me to throw exceptions from within that COM interface, to be catched at the upper level from where the COM was instantiated. Does anyone know if this is possible at all, and if so, give me some pointers / hints in how to implement such a thing? Thanks a lot in advance! Perry Bruins (Netherlands) Re: COM and Exceptions Christian Graus17-Jun-02 1:40 Christian Graus 17-Jun-02 1:40  All exceptions MUST be handled within the component, the only thing you can do is to pass back a HRESULT to indicate what happened. Of course, if you're passing back XML, you can pass back any other info you like, but you'll need to check the HRESULT for success, you simply cannot be throwing excpetions across processes or machines. Christian I am completely intolerant of stupidity. Stupidity is, of course, anything that doesn't conform to my way of thinking. - Jamie Hale - 29/05/2002 Half the reason people switch away from VB is to find out what actually goes on.. and then like me they find out that they weren't quite as good as they thought - they've been nannied. - Alex, 13 June 2002 Re: COM and Exceptions Perry Bruins17-Jun-02 20:41 Perry Bruins 17-Jun-02 20:41  Thanks a lot for your answer. I already thought it was not possible, but now I know for sure. Perry Scrolling image 17-Jun-02 0:22 17-Jun-02 0:22  Hi all, Can any one suggest a method to scroll a jpg or bmp image through the bottom of a dialog just like the moving adds on a TV Screen? With regards Shibu K.V. Senior Research Associate. VLSI ASIC Hardware Design Group Electronics R&D Centre,Trivandrum India Re: Scrolling image Renjith Ramachandran17-Jun-02 1:03 Renjith Ramachandran 17-Jun-02 1:03  you can put the image in to a dialog box and move the entire dialog from bottom to top by MoveWindow() or move the position of the Image Control.. Renjith The CPian Re: Scrolling image Joaquín M López Muñoz17-Jun-02 5:08 Joaquín M López Muñoz 17-Jun-02 5:08  If you're looking for a facility for credits displaying, you might want to have a look at Pål K. Tønder's Scrolling credits using CStatic. Joaquín M López Muñoz Telefónica, Investigación y Desarrollo Combo box to display directories & files. 17-Jun-02 0:21 17-Jun-02 0:21  Hi, I'm working with a dialog based application.Is there any method for showing the directories, folders,sub folders and all the files contained them in a single combo box just like a tree view control. Can anyone help me?. With regards Shibu K.V. Senior Research Associate. VLSI ASIC Hardware Design Group Electronics R&D Centre,Trivandrum India Re: Combo box to display directories & files. Nish Nishant17-Jun-02 0:30 Nish Nishant 17-Jun-02 0:30  Look up SHBrowseForFolder Regards Nish Author of the romantic comedy Summer Love and Some more Cricket [New Win] Re: Combo box to display directories & files. Renjith Ramachandran17-Jun-02 5:09 Renjith Ramachandran 17-Jun-02 5:09  NISHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH theapp COMPANYYYYYY TECHNOPARK TRIVANDRUM ??????? MAIL CHEYYEDEY ENTHAADEEEY JAAAAADAAAA??? NJAN PALA TIME MAIL CHEYTHU ENNITTUM ENTHEY ORU JAADAA????? R_Renjith The CPian Re: Combo box to display directories & files. Nish Nishant19-Jun-02 2:00 Nish Nishant 19-Jun-02 2:00  Sorry, but I don't entertain personal mails! I usually delete all such mails as I seem to get too many of them. You work in Technopark too? Nish Author of the romantic comedy Summer Love and Some more Cricket [New Win] communication protocol udayGovekar16-Jun-02 23:46 udayGovekar 16-Jun-02 23:46  Hi, can any one tell me about the implementation of RS-485 and also about the difference btw full duplex and half duplex if example is provided it would be of great help thanks Uday Re: communication protocol Roger Allen17-Jun-02 3:50 Roger Allen 17-Jun-02 3:50  I can tell you about the basics. RS-485 works by voltage differential. Their are two lines which are either +ve or -ve depending on whether a 1 or a 0 is being transmitted. These lines are labelled A and B. So a 0 = A+, B- a 1 = A-, B+ (or visa-versa) Also, many devices can be on an RS-485 bus at a time. They need to use some kind of communication protocol to decide when they want to transmit on the bus. Any number of devices can listen, but only 1 can transmit at a time or you get garbled communication. Typiclly, you have 1 master device which initiates all transmissions, and then the other devices reply to the message, but they have to do so in a set time frame. DOnt forget to use checksums etc if needed to avoid bad messages. Full-duplex/Half duplex. In one of these modes you also receive in your input buffer what you send, in the other you do not. I forget which way round it is. Hope this info helps. Roger Allen Sonork 100.10016 If I had a quote, it would be a very good one. Re: communication protocol Phil Speller17-Jun-02 4:20 Phil Speller 17-Jun-02 4:20  Roger Allen wrote: Full-duplex/Half duplex. In one of these modes you also receive in your input buffer what you send, in the other you do not. I forget which way round it is. Are you not getting confused with "loop back"? Full-duplex means that both transmission and reception of data can occur simultaneously. Half-duplex means that only transmission or reception can take place at any one time. There is also a form of communication called Simplex which means that only transmission or reception ever occur. Free Re: communication protocol Roger Allen17-Jun-02 4:34 Roger Allen 17-Jun-02 4:34  FreeLancer wrote: Are you not getting confused with "loop back"? Hmmm, maybe. I am going by the driver stuff installed for the RS-485 card in my PC. It can have a half/full duplex mode. Your probably right. Its been a long time since I looked at it*. * Need to get my memory chips upgraded - finally I may have 2K! Roger Allen Sonork 100.10016 If I had a quote, it would be a very good one. How can I tell when a thread has ended Klaus Petersen16-Jun-02 23:44 Klaus Petersen 16-Jun-02 23:44  Hi. I am making a program in Visual studio 6.0 and I am currently having trouble telling when a thread has ended. Does anyone know how one can tell when a thread has ended? Re: How can I tell when a thread has ended Neville Franks17-Jun-02 0:22 Neville Franks 17-Jun-02 0:22  One way is to use a CEvent and signal it when the thread function ends. You can then test this event wherever you need to know if the thread has finished. Neville Franks, Author of ED for Windows. www.getsoft.com Re: How can I tell when a thread has ended Nish Nishant17-Jun-02 0:31 Nish Nishant 17-Jun-02 0:31  You can WaitForSingleObject on the thread handle. Nish Author of the romantic comedy Summer Love and Some more Cricket [New Win]

Last Visit: 31-Dec-99 18:00     Last Update: 6-Jun-24 8:57 Refresh ᐊ Prev1...16726167271672816729167301673116732167331673416735 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.