|
im sorry i meant that while running
Arise Awake Stop Not Till ur Goal is Reached.
|
|
|
|
|
deeps_cute wrote: how to know the user has closed the webpage eventhough its running
It's not very clear what you mean, but here's how I interpret your problem:
You want to show a certain web page to the user and get informed when the user has closed the web page.
If you open the web page through the DDE mechanism as you currently are, an already running instance of the browser will show the web page unless configured to explicitly create another instance in its DDE command in the registry which is wuite uncommon.
When this happens you have no way of knowing when the user closes the browser instance since no process handle will be returned.
Even if the browser is not running when you call ::ShellExecuteEx(...), you have no idea if the user leaves the initial web page.
To my knowledge the only way to do this is running the browser as a COM server and listen for an event fired when the user browse to another page.
I think you have to think this through once again, or at least tell us what limitations you can accept. Consider using ::CreateProcess(...) to create a new browser instance every time, but you still wouldn't know if the user browses to another page.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
yes you r right
"You want to show a certain web page to the user and get informed when the user has closed the web page."
how to do this. i dont know DDE mechanism
Arise Awake Stop Not Till ur Goal is Reached.
|
|
|
|
|
As I mentioned in my previous post the only way I think would do what you want is using the browser as a COM server.
Have a look here for info about how to use the WebBrowser Control[^].
You can also search the web for more info about the WebBrowser Control.
-- modified at 5:04 Wednesday 11th April, 2007
If you're using MFC you can use CHtmlView that wraps the WebBrowser Control making it very easy to use.
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
Hi all:
Every time i write a program and after making sure that everything is okay, each time i reopen again later, i get the errors below while linking even though compiling was successfull.
I have tried using destructors for the CWinApp but it does not work. I've also tried rebuilding the whole project but still it does not work.
The setting are set to "Using MFC in a Shared DLL"
Below is the errors
Linking...
msvcrtd.lib(crtexe.obj) : error LNK2001: unresolved external symbol _main
Debug/ss.exe : fatal error LNK1120: 1 unresolved externals
Error executing link.exe.
ss.exe - 2 error(s), 0 warning(s)
Please help:
Thanking you for being there.
TreeS
|
|
|
|
|
While its not a direct answer...
Have you tried using the AppWizard to make a new simple app similar to yours? (If yours is MDI, choose MDI) and then compare the project settings?
Its possible you've ticked something you shouldn't have (ie Ignore Default Libraries) etc, and this will let you spot the problem.
The other thought that occurs to me is that you're doing a Unicode project and haven't set the entry point to wWinMainCRTStartup (do a search on that if
needed)
Iain.
|
|
|
|
|
I have a windows service application. Created in windows XP and vc++.Net2005. I want this to make it work on windows 95,98,2K,XP and Vista. I want to get the username of the current logged-in user or users(if the user is switching between more than once loggin on the same machine)
I have implemented it in this format:
Added the refrences to my project that is using project properties from the toolbar. Now, wrote in this way:
CString Get_Username()
{
CString Username=_T("");
System::Management::ManagementObjectSearcher q = gcnew System::Management::ManagementObjectSearcher("Select * from Win32_Process");
System::Management::ManagementObjectCollection mc = q.Get();
System::Management::ManagementObject mo = mc.GetEnumerator();
while(!mo)
{
Username = mo("username");
mo.Get(mc);
}
return Username;
}
i am getting the following compilation errors:
.\DataSentinelService.cpp(80) : error C2664: 'System::Management::ManagementObjectSearcher::ManagementObjectSearcher(System::String ^)' : cannot convert parameter 1 from 'System::Management::ManagementObjectSearcher ^' to 'System::String ^'
No user-defined-conversion operator available, or
Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast
.\myservice.cpp(81) : error C3673: 'System::Management::ManagementObjectCollection' : class does not have a copy-constructor
.\myservice.cpp(82) : error C2664: 'System::Management::ManagementObject::ManagementObject(System::Management::ManagementPath ^)' : cannot convert parameter 1 from 'System::Management::ManagementObjectCollection::ManagementObjectEnumerator ^' to 'System::Management::ManagementPath ^'
No user-defined-conversion operator available, or
Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast
.\myservice.cpp(84) : error C2088: '!' : illegal for class
.\myservice.cpp(84) : fatal error C1903: unable to recover from previous error(s); stopping compilation
I have also tested by placing the following lines in the starting of my myservice.cpp file:
using namespace System;
using namespace System::Management;
But still the same kind of errors persists.
I have even searched on net to get the exact cause of error/problem. In the msdn also, the code samples are given for VB.Net/C# but not for vc++/C++.
Any idea please...
Thanks in advance
Anee
|
|
|
|
|
I want to program a software with VC++.The function of my software is same as the MS's Remote Desktop Client.I want to use the wtsapi32.dll or mstscax.dll to code my software,but I don't know how to use them, What should I do? Could you give me some suggestions? Sample code is best.Thank you very much!
My Email:lipingliang231@163.com.
|
|
|
|
|
It sounds as though you might want to start with a few less-ambitious projects first.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
DavidCrow wrote: start with a few less-ambitious projects first
Like ocean wave simulation?
"If you can dodge a wrench, you can dodge a ball."
|
|
|
|
|
Is there some correlation between Vietnam and China?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
Hi all,
When I tried to build my windows application, it gave me following error.
Linking...
C:\Program Files\Microsoft Visual Studio\VC98\LIB\LIBCD.lib : fatal error LNK1127: library is corrupt
Error executing link.exe.
Can anyone tell me how to resolve the error. I tried reinstalling Visual Studio, but It didn't work.
Thanks for the prompt reply.
Regards,
Nikhs,
Nikhil Trivedi
|
|
|
|
|
It's strange. It seems that your installation is broken. :-/
Try to search web for LIBCD.lib and download other version.
|
|
|
|
|
I tried to search libcd.lib on microsoft site, but I didn't get it. You are right that there is some problem and might be my copy of Visual studio is corrupted. Is there any other solution ?
Thanks for reply.
Regards
Nikhs
Nikhil Trivedi
|
|
|
|
|
|
Well, here is the problem.
There is an application, which is using the text output via standard Windows functions/fonts.
I need to hook this output. I want to know, ALL text the specific application is drawing. The application doesn't use any Windows elements (such as windows/buttons/etc). It has only a graphic canvas and outputting the gfx/text there.
So, where can I find the solution?
|
|
|
|
|
The easiest solution would be to make wrapper functions to do the text output and change all the raw text output calls to use your wrappers. The wrapper would implement some notification mechanism in addition to delegating to the raw text output methods. If that’s not possible you could try a Google search on “IAT patching” – assuming you’re not using loading the relevant DLLs dynamically.
Steve
|
|
|
|
|
could you please send me a wizardless written c++ program which when built and run can bring me a dialog box.
jombaweed
|
|
|
|
|
Im sorry I dont understand what you said
|
|
|
|
|
Why? 
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
Please rephrase your question.
TreeS
|
|
|
|
|
Why in the world would you want to do that by hand when using the app wizard would take less than 30 seconds to make what you're asking for?
Maybe you've been smoking a little too much jomba weed.
-- modified at 8:34 Tuesday 10th April, 2007
While reading earlier posts, I found another guy asking exactly the same question (creating a dialog-based app without using appwizard). This leads me to believe that you guys are in a class, and this is a homework assignment.
NO SOUP FOR YOU!
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
John Simmons / outlaw programmer wrote: This leads me to believe that you guys are in a class, and this is a homework assignment.
If they are in a class so maybe their teacher is reading this forum;P.
|
|
|
|
|
I just hope it's not the teacher posting the requests... 
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown
|
|
|
|
|
jombaweed wrote: please send me a wizardless
Not a problem at all. I take credit cards, cash or cashiers checks. My fee for doing your homework is $500 plus a $250 one time setup fee.
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
