|
_Maxxx_ wrote: The alternative is to use a Controller
Isn't that just moving the linkage one step away, the controller still needs to be aware of all the VMs
Here is another thought, how about a message style where the main VM sends a message to save and the other VMs consume the message. All the VMs must subscribe to the message pump.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Mycroft Holmes wrote: the controller still needs to be aware of all the VMs
You're right - but I don't see not nuffin' wrong with that.
IN the example cited by the OP I would probably have a property of VM1, VM2 etc. in my parent Vm - and access either methods, messages or events on or from them.
The controller just allows for more consistent communication - your children VM ask the controller to do something (Hey controller, this data has changed, better handle that for me). The Controller then says to itself "Hey! this is a change in this data - I better let everyone know!" so it raises an event/sends a message/calls a method on a VM - whatever to let those interested parties know.
Mycroft Holmes wrote: how about a message style where the main VM sends a message to save and the other VMs consume the message.
Not sure that works - if a child Vm receives the message, how does it give the modified data back to the parent VM?
I prefer the "I've changed something, please deal with it" paradigm, rather than the "Hey, have you changed anything? If so, give me the changes." paradigm.
(Although, now I am thinking about at least implementing a "Some data has been changed by this VM" property in my base VM class - which in turn can send a message... So now the Parent VM can subscribe to any Child VM messages, and the message (at least potentially) can carry the modified data.
Hmmm
Child Vm1 changes the patient BP - it is now 'dirty' and sends a message to say so.
Parent Vm0 has subscribed to the "BP Has Changed" message which carries with it a BP object.
VM0 saves the data to the repository and sends out a "BP Has been Saved" message - which is (of course) subscribed to by the Vm1, which resets itself to "Clean"
Sorry to think outloud in a reply - no sensible buggers at work to talk to!
___________________________________________
.\\axxx
(That's an 'M')
|
|
|
|
|
I go with the last scenario (after Hmmm) except (there is always an except)
I would have vm1 (child) deal with it's own data (save to the DB) and tell VM0 that the data was saved. This assumes the database structure reflects the actual data where VM0 is the patient and VM1 is a BP record.
VM0 may need to reload the list of BP records when told by VM1 that the record was saved and this would be prompted by the message pump.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Because this is a medical system (and the last system I developed was a medical system!) there may be requirements to save multiple uncommitted changes at one time; In fact in the system I developed, I did exactly what you are suggesting, but used a caching mechanism at the back-end so nothing was finally committed until the consultation was complete.
It's amazing how much one can learn posting on CP! I'm in a situation where I am pretty much the sole developer, so don't have minds to bounce ideas off - every day I get home and completely change my MVVM application!
___________________________________________
.\\axxx
(That's an 'M')
|
|
|
|
|
@max thanks i think controler will help me.
WANTED wasim khan(Killed 50 Innocent Buggs, Distroyed 200 Exception, make 5 Project Hostage) any Compnay Hire him will pay 30,000. Best place where u can get him is Sorcim Technologies Murre Road RWP
|
|
|
|
|
Just spitballing here, but this situation is typically handled by the main VM knowing all of it's child VM's. I would probably look at using Reactive Extensions to observe the child VMs from the parent (as they should be firing property changed events when data changes), and the parent VM will react to the changes.
|
|
|
|
|
Nice ... I've not even heard of Reactive Extensions until I read this post. Thanks Pete!
Hope you're well!
|
|
|
|
|
Rx are really cool. I'm currently doing an article on using them with jQuery.
I am well. How are you doing mate?
|
|
|
|
|
Really good thanks fella. V. Busy! I've been and gone solo as a contractor! Pretty scary but going really well so far 
|
|
|
|
|
Good job. Where are you at?
|
|
|
|
|
I left Occam for 9 months, encountered utter hell at two companies during that time and was then offered work contracting for Occam again. Was a no-brainer although I'm not doing WPF right now, lots of ASP.NET, IIS and SQL. I really want to find a WPF contract after this one ends.
|
|
|
|
|
Don't be surprised at the lack of WPF jobs out there... it seems pretty rare to me. I was looking for a new gig cuz I was tiring of my current one and only saw 2 or 3 wpf ads over 6 months. People are still on MFC / Winforms, or just scrapping desktop and going web only. Guess I'll stick around then since I'm 100% WPF now .
|
|
|
|
|
Yeah, they are thin on the ground at the moment it appears. Where are you based?
|
|
|
|
|
In my main siilverlight page, there is a hyperlink button which if clicked shows a child page. i.e.
private void hypShowPage_Click(object sender, RoutedEventArgs e)
{
childwindowname p = new childwindowname ();
p.Show();
}
Question:
Once, the ok button is clicked on th echild window page, I would like to refresh the
existing page (Main page).
How is this done please?
Thanks
|
|
|
|
|
arkiboys wrote: I would like to refresh the
existing page (Main page).
This is wrong, you need to refresh the DATA not the page. Presumably the child window changes some data and closes, you need to trap the close operation (I use a message pump) and refresh the data source (in you main VM/Codebehind) affected by the childwindow. As the data should be bound with onpropertychange events the xaml will automatically refresh.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hi,
Yes, I meant to say to refresh the data on the main page.
I did read your suggestion several times. Still not sure how to do this.
Thanks
|
|
|
|
|
Hi,
Am using Infragistics calendar control in my WPF Application,
I have to disable the date which is less than current day when the user click on the calendar control, could u tell me how to do it...
|
|
|
|
|
I never work with wpf but can't you just use the DateChanged event?
Show a messagebox if the date is less then today and reset it (the date) to today.
|
|
|
|
|
Hi,
I am using Telerik RadGridView with with ShowInsertRow property set to true. After user inserts data into this row RowValidating and EditRowEnded events are fired. How can I lock InsertRow to be visible(RadGridView is in InsertMode) until data is not valid? Should I do it in RowValidating or EditRowEnded events?
regards
modified on Thursday, February 24, 2011 2:15 AM
|
|
|
|
|
Normally, when you have a problem with a commercial vendors product, it is customary to ask a question in the support forums there. They will generally be able to answer questions far faster than here about their products.
|
|
|
|
|
I have a requirement to reuse a main form if a modal dialog. So I thought I'd simply put a NavigateFrame in the body of the dialog
<navigation:Frame x:Name="DialogContent" Grid.Row="0" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch"
Source="AccountTreeDLG" UriMapper="{StaticResource MyMapper}" Visibility="{Binding AppVisible, Converter={StaticResource VisibilityConverter}}">
</navigation:Frame>
AccountTreeDLG is the urimapper entry pointing to the usercontrol.
It seems the Navigation frame will only allow the parent form to be displayed. Has anyone run up against this.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hi ,
I have a wpf app , which has Custom UserCtrl(name it as CustomCursor) for mouse(looks like Hand symbol), so by moving the CustomCursor with feed of x,y points , CustomCursor wil be rendered in the Main window(which has a stackPanel loaded with Border and intern with Image control).
I have written mouseEnter/mouseLeave handlers for border . So when CustomCursor moves on Border, thru hittest i call the MouseEnter handler for border. But I couldnt able to identify mouseLeave for border. As I need to select and deselect each border when the cursor is on/off of the border.
Can someone throw some lights on how to find mouseLeave using hittest in case of border.
Thanks
|
|
|
|
|
I have a problem of saving files using Save file dialog.I'm using Silverlight 3.Recently I had upgraded my machine to vista sp2.But in that i cannot see any of my files getting saved when i use savefiledialog.It was working earlier before upgrading.This happens only with silverlight application alone.
Its an inbrowser application.Can anyone tell me wat cud be the reason.
|
|
|
|
|
Try disabling UAC and then try again.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
|
|
|
|
|
I tried this option but didn't work for me.One thing i noticed was that the file got created and gets deleted immediately with 0 KB. I even tried uninstalling silverlight runtime and installing but no option.
Is it any issue with any vista sp2 patches ?
modified on Wednesday, February 23, 2011 8:26 AM
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
