|
OriginalGriff wrote: And Herself will be wearing it for 6 hours a day
Mine usually does for "expected" 5 hours a day (she never gets out punctually), but she is kind of careful with this kind of things.
Face protection no problem... can be cleaned up. As long as you don't scratch it, no problem.
Nose Masks... 2 units / day. Then wash machine.
Self made nose masks were her idea. I just jumped in when she had the first prototype and was discussing with her mother about the "nose-grip".
I already knew that this kind of cable works really good in that area (I had a bad experience with the septic tank... twice  )
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
I'm the same Paul - if I do a job it stays done.
"I didn't mention the bats - he'd see them soon enough" - Hunter S Thompson - RIP
|
|
|
|
|
To reduce stringing, try increasing the retraction distance and speed.
The holes in the Screen part are the same size as a normal hole punch, and the distance between the left two holes and the right two holes is the same as a normal 2 hole punch, (the middle gap is a bit smaller).
I've been trying to print these for 3D Crowd UK, been having issues with a bad batch of PLA tho, intermittent clogging, I suspect its diameter gets too big in places.
I've got a roll of Prusa PETG on it's way.
|
|
|
|
|
Got home from Qatar and eventually got round to opening up my 2nd 3D printer, this time an Anycubic Predator delta printer. It is a bit of a beast, at over 1m tall (excluding the filament reel holder) and almost 60cm wide.
It slots in nicely next to my other one, might get some blocks to lift it off the floor a bit, but at the moment it's fine.
The man cave is taking shape now,
Just need a few more racks and stuff to be a bit more organised with all the smaller parts etc.
|
|
|
|
|
Doesn't look like you are going to run out of filament anytime soon, either! 
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
My weekend road trip last year was to (not Chicago) Illinois.
Did find a road that was closed.... I guess barricades aren't good enough
And I did learn something about the origin of The Wizard of Oz
These little 3 day jaunts are to just to see what is there that you don't hear about; and typically are done on the country roads instead of freeways.
Director of Transmogrification Services
Shinobi of Query Language
Master of Yoda Conditional
|
|
|
|
|
I'm sure that had they used ordinary barricades, the low-information drivers would have driven around them - right off the end of the road. They would then have sued the city/county/state for not adding "this means YOU!" to the sign. 
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
|
Maybe its just the angle of the photo, but there's something slightly unsettling about the statue of Dorothy. Something about the eyes makes me think of The Shining, or something.
|
|
|
|
|
Yeah ... there is a certain malevolence to that face ... 
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
My dev machine is down. I'm here on my hubby's craptop
I went to install ubuntu 18.04lts and grub2 refuses to boot my system
I've tried installing using a ton of different configs, i even pulled a drive because it was insisting on writing the boot to sdb instead of sda
It just dies. Cannot find an OS but the setup is successful.
Now I'm hosed. I don't know where my windows DVD is since I've moved, and I'd have to put a dvd drive back in the #$(# thing even if i found it.
I hate linux when it doesn't work. I'm probably doing something wrong but I have no idea what. This system has taken this same version of ubuntu before (albeit on an older hard drive, but both SATA hdds under 3TB)
I'm so over a barrel right now. FML
sorry wrong group
When I was growin' up, I was the smartest kid I knew. Maybe that was just because I didn't know that many kids. All I know is now I feel the opposite.
modified 7-Jan-20 7:56am.
|
|
|
|
|
And you are sure your intention was to post this here in "Where I am: Member Photos"?
It does not solve my Problem, but it answers my question
modified 19-Jan-21 21:04pm.
|
|
|
|
|
whoops. i must be really out of sorts. not sure how i even got here except this trackpad stinks
When I was growin' up, I was the smartest kid I knew. Maybe that was just because I didn't know that many kids. All I know is now I feel the opposite.
|
|
|
|
|
You can send OG a message, I think he can delete this tree 
It does not solve my Problem, but it answers my question
modified 19-Jan-21 21:04pm.
|
|
|
|
|
But where would the fun be in that?
cheers
Chris Maunder
|
|
|
|
|
Good point!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Sorry, I only tried to help...
It does not solve my Problem, but it answers my question
modified 19-Jan-21 21:04pm.
|
|
|
|
|
I was joking
cheers
Chris Maunder
|
|
|
|
|
|
Where did this rubber duck thing come from and what does it mean?
I'm old school. I just wave a dead chicken over my code.
When I was growin' up, I was the smartest kid I knew. Maybe that was just because I didn't know that many kids. All I know is now I feel the opposite.
|
|
|
|
|
As long as you read the entrails to decode the event log first, that's fine.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
|
a cyberduck, that's great. hahaha
reminds me of robot chicken
When I was growin' up, I was the smartest kid I knew. Maybe that was just because I didn't know that many kids. All I know is now I feel the opposite.
|
|
|
|
|
The box around my 3D Printer:
It's currently printing the box for the IR temperature display I'm going to add to the top.
Plywood, 20mm wood structure, perspex window, LED light strip from FleaBay, extractor fan FleaBay, fan and tube / switch mounting plate 3D printed.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Printer? Piece of Furniture?
Reminds me of vintage TV's in that respect.
Probably I'll await the ionic-bottle-containment systems. This will work with the pattern is used to create an EMF that will attract charged "ink" and just fill the container. Quickly.
. . . start saving for the upgrade . . .
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
I'm waiting for the Star Trek replicator. 
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
