Click here to Skip to main content
15,867,845 members
Articles / Programming Languages / Lua

Writing Compiler Front-Ends for LLVM with Lua using Mewa

Rate me:
Please Sign up or sign in to vote.
5.00/5 (3 votes)
26 May 2021MIT30 min read 10K   49   9   4
In this article we see how a very primitive compiler is written in Lua using Mewa and how to compile and run a simple demo program in the shell.
LLVM IR text representation makes it possible to write a compiler front-end without being bound to an API. We can map the source text to the text of LLVM IR and use the tools of the Clang compiler for further compilation steps. This opens the doors to implement compiler front-ends in different ways. Mewa tries to optimize the amount of code written. It targets single authors that would like to write a prototype of a non-trivial programming language fast, but at the expense of a structure supporting collaborative work. This makes it rather a tool for experiment than for building a product.

Introduction

The Mewa compiler-compiler is a tool to script compiler front-ends in Lua. A compiler written with Mewa takes a source file as input and prints an intermediate representation as input for the next compilation step. The example in this article uses the text format of LLVM IR as output. An executable is built using the llc command of Clang.

Mewa provides no support for the evaluation of different paths of code generation. The idea is to do a one-to-one mapping of the program structures to code and to leave all analytical optimization steps to the backend.

For implementing a compiler with Mewa, you define a grammar attributed with Lua function calls. The program mewa will generate a Lua script that will transform any source passing the grammar specified into an AST with the Lua function calls attached to the nodes. The compiler will call the functions of the top-level nodes of the AST that take the control of the further processing of the compiler front-end. The functions called with their AST node as argument invoke the further tree traversal. The types and data structures of the program are built and the output is printed in the process.

Goals

We start with a tutorial of the typedb library of Mewa for Lua with some self-contained examples. Self-contained means that nothing is used but the library. The examples are also not dependent on each other. This allows you to continue reading even if you did not understand it completely and to return later.

After this, this article will guide you through the implementation of a compiler for a simple programming language missing many features. The example program we will compile is the following:

extern function printf void( string, double);
// ... Variable argument list functions are beyond the scope of this intro

class Employee
{
  string name;
  int age;
  double salary;

  function setSalary void( double salary_)
  {
    salary = salary_;
  }
}

function salarySum double( Employee[10] list)
{
  var int idx = 0;
  var double sum = 0.0;
  while (idx < 10 && list[idx].age)
  {
    sum = sum + list[idx].salary;
    idx = idx + 1;
  }
  return sum;
}

function salaryRaise void( Employee[10] list, double percentRaise)
{
  var int idx = 0;
  var double factor = 1 + (percentRaise / 100);
  while (idx < 10 && list[idx].age)
  {
    list[idx].setSalary( list[idx].salary * factor);
    idx = idx + 1;
  }
}

main
{
  var Employee[ 10] list = {
    {"John Doe", 36, 60000},
    {"Suzy Sample", 36, 63400},
    {"Doe Joe", 36, 64400},
    {"Sandra Last", 36, 67400}
  };
  salaryRaise( list, 10);          // Give them all a 10% raise
  printf( "Salary sum: %.2f\n", salarySum( list));  // Expected result = 280720
}

We will compile this program with our example compiler and run it in a shell. We will also look at different parts including the grammar of the language. Finally, I will talk about the features missing in the language to give you some outlook on how to implement a compiler of a complete programming language.

Target Audience

To understand this article some knowledge about formal languages and parser generators is helpful. To understand the examples you should be familiar with some scripting languages that have a concept of closures similar to Lua. If you have read an introduction to LLVM IR, you will get grip on the code generation in the examples.

Deeper Digging

For a deeper digging you have to look at the Mewa project itself and the implementation of the main example language, a statically typed multiparadigm programming language with structures, classes, interfaces, free functions, generics, lambdas and exceptions. There exists an FAQ that also tries to answer problem-solving questions.

Preparation

The Mewa program and the Lua module are written in C++. Follow the instructions to install it. The installation description is written for Ubuntu. You have to look the package names up for other platforms.

Installation

To install Mewa you need a C++ compiler with C++17 support. Mewa is tested with clang and gcc.

Required system packages

For Lua 5.2
lua5.2 liblua5.2-dev luarocks llvm llvm-runtime
For Lua 5.1
lua5.1 liblua5.1-0-dev luarocks llvm llvm-runtime

Required luarocks packages

luarocks install bit32
luarocks install penlight 
luarocks install LuaBcd

Build LuaBcd from sources (if luarocks install LuaBcd fails)

If the build of LuaBcd with luarocks fails, you can fetch the sources from github and build it:

git clone https://github.com/patrickfrey/luabcd.git
cd LuaBcd
./configure
make
make install

Fetch sources of the latest release version

git clone https://github.com/patrickfrey/mewa
cd mewa
git checkout -b 0.3

Configure to find Lua includes and to write the file Lua.inc included by make

./configure

Build with GNU C/C++

make COMPILER=gcc RELEASE=YES

Build with Clang C/C++

make COMPILER=clang RELEASE=YES

Run tests

make test

Install

make install

Lua Environment

Don't forget to set the Lua environment (LUA_CPATH,LUA_PATH) correctly when running the Lua scripts from the command line. You find a luaenv.sh in the archive of this article. Load it with.

. examples/intro/luaenv.sh

Example Paths

All examples in this article are part of the Mewa project. The example compiler discussed here is in examples/intro relative to the Mewa project path. The files are also uploaded in a tar as attachment of the article published on codeproject.com. But the paths of the example files as they are referred to from this article are always relative from the Mewa project root directory.

Tutorial

In this tutorial, we will learn how to use the typedb library with some self-contained examples.

Declaring a variable

Let's start with a complicated example that is a substantial step forward. We print the LLVM code needed to assign a variable value to another variable. For this, we need to introduce types and reductions.

Introduction

Types

Types are items represented as integers. They are declared and retrieved by the name of the type and a context type. The context type is itself a type or 0. Global free variables have for example no associated context type and are declared with 0 as context type. Types are associated with a constructor. A constructor is a value, structure, or a function that describes the construction of the type. Optionally, types can have parameters attached. Parameters are a list of type/constructor pairs. Types are declared with

typeid = typedb:def_type( contextType, name, constructor, parameters)

The typeid returned is the integer that represents the type for the typedb.

Reductions

Reductions are paths to derive a type from another. You can imagine the type system as a directed graph of vertices (types) and edges (reductions). We will introduce some concepts that allow a partial view of this graph later. For now, imagine it as a graph. Reductions have also an associated constructor. The constructor describes the construction of the type in the direction of the reduction from its source. Here is an example:

typedb:def_reduction( destType, srcType, constructor, 1)

The 1 as parameter is an integer value we will explain later.

Resolve Type

Types can be resolved by their name and a single or a list of context types, one having a path of reductions to the context type of the resolved type.

Derive type

Types can be constructed by querying a reduction path from one type to another and constructing the type from the source type constructor by applying the list of constructors on this path.

Let's have a look at the example:

Source

File intro/tutorial/variable.lua

Lua
mewa = require "mewa"
typedb = mewa.typedb()

-- [1] Define some helper functions
-- Map template for LLVM IR Code synthesis
--   substitute identifiers in curly brackets '{' '}' with the values in a table
function constructor_format( fmt, argtable)
  return (fmt:gsub("[{]([_%d%w]*)[}]",
    function( match) return argtable[ match] or "" end))
end

-- A register allocator as a generator function counting from 1,
-- returning the LLVM register identifiers:
function register_allocator()
  local i = 0
  return function ()
    i = i + 1
    return "%R" .. i
  end
end

-- Build a constructor by applying a constructor function on some arguments
--   or returning the first argument in case of a constructor function as nil
function applyConstructor( constructor, this, arg)
  if constructor then
    if (type(constructor) == "function") then
      return constructor( this, arg)
    else
      return constructor
    end
  else
    return this
  end
end

-- [2] Define the LLVM format strings
local fmt_def_local = "{out} = alloca i32, align 4 ; variable allocation\n"
local fmt_load = "{out} = load i32, i32* {this} ; reduction int <- int&\n"
local fmt_assign = "store i32 {arg1}, i32* {this} ; variable assignment\n"

-- [3] Define an integer type with assignment operator
local register = register_allocator()
local intValType = typedb:def_type( 0, "int")  -- integer value type
local intRefType = typedb:def_type( 0, "int&")  -- integer reference type
typedb:def_reduction( intValType, intRefType,  -- get value from reference type
  function(this)
    local out = register()
    local code = constructor_format( fmt_load, {out=out,this=this.out})
    return {out=out, code=code}
  end, 1)
typedb:def_type( intRefType, "=",    -- assignment operator
  function( this, arg)
    local code = (this.code or "") .. (arg[1].code or "")
      .. constructor_format( fmt_assign, {this=this.out,arg1=arg[1].out})
    return {code=code, out=this.out}
  end, {intValType})

-- [4] Define a variable "a" initialized with 1:
local register_a = register()
local variable_a = typedb:def_type( 0, "a", {out=register_a})
typedb:def_reduction( intRefType, variable_a, nil, 1)
io.stdout:write( "; SOURCE int a = 1;\n")
io.stdout:write( constructor_format( fmt_def_local, {out=register_a}))
io.stdout:write( constructor_format( fmt_assign, {this=register_a,arg1=1}))

-- [5] Define a variable b and assign the value of a to it:
io.stdout:write( "; SOURCE int b = a;\n")

-- [5.1] Define a variable "b":
local register_b = register()
local variable_b = typedb:def_type( 0, "b", {out=register_b})
typedb:def_reduction( intRefType, variable_b, nil, 1)

io.stdout:write( constructor_format( fmt_def_local, {out=register_b}))

-- [5.2] Assign the value of "a" to "b":
-- [5.2.1] Resolve the operator "b = .."
local resolveTypeId, reductions, items = typedb:resolve_type( variable_b, "=")
if not resolveTypeId then
  error( "Not found")
elseif type( resolveTypeId) == "table" then
  error( "Ambiguous")
end

-- [5.2.2] For all candidates of "b = ..", get the first one with one parameter
--   and match the argument to this parameter
local constructor = typedb:type_constructor( variable_b)
for _,redu in ipairs(reductions or {}) do
  constructor = applyConstructor( redu.constructor, constructor)
end
for _,item in ipairs(items) do
  local parameters = typedb:type_parameters( item)
  if #parameters == 1 then
    local reductions,weight,altpath
      = typedb:derive_type( parameters[1].type, variable_a)
    if altpath then error( "Ambiguous parameter") end
    if weight then
      -- [5.3] Synthesize the code for "b = a;"
      local param_constructor = typedb:type_constructor( variable_a)
      for _,redu in ipairs(reductions or {}) do
        param_constructor = applyConstructor( redu.constructor, param_constructor)
      end
      constructor = typedb:type_constructor(item)( constructor, {param_constructor})
      break
    end
  end
end
-- [5.3] Print the code of "b = a;"
io.stdout:write( constructor.code)

Output

; SOURCE int a = 1;
%R1 = alloca i32, align 4 ; variable allocation
store i32 1, i32* %R1 ; variable assignment
; SOURCE int b = a;
%R2 = alloca i32, align 4 ; variable allocation
%R3 = load i32, i32* %R1 ; reduction int <- int&
store i32 %R3, i32* %R2 ; variable assignment

Conclusion

If you got here you got already quite far. We saw the application of an operator ('=') with an argument. Applying a function with more than one argument is imaginable. The first match of the operator was our candidate match chosen as a result. But selecting a match by other criteria is imaginable. We declared a variable with a name, a concept of scope is missing here. We will look at scopes in the next example.

Scope

Now let's see how scope is represented in the typedb.

Introduction

Scope in Mewa is represented as a pair of non-negative integer numbers. The first number is the start, the first scope step that belongs to the scope, the second number the end, the first scope step that is not part of the scope. Scope steps are generated by a counter with increments declared in the grammar of your language parser. All declarations in the typedb are bound to a scope, all queries of the typedb are bound to the current scope step. A declaration is considered to contribute to the result if its scope is covering the scope step of the query.

Set the current scope
scope_old = typedb:scope( scope_new )
Get the current scope
current_scope = typedb:scope()

The example is fairly artificial, but it shows how it works:

Source

File intro/tutorial/scope.lua

Lua
mewa = require "mewa"
typedb = mewa.typedb()

function defineVariable( name)
  local scopestr = mewa.tostring( (typedb:scope()))
  typedb:def_type( 0, name, string.format( "instance of scope %s", scopestr))
end
function findVariable( name)
  local res,reductions,items = typedb:resolve_type( 0, name)
  if not res then return "!NOTFOUND" end
  if type(res) == "table" then return "!AMBIGUOUS" end
  for _,item in ipairs(items) do
    if typedb:type_nof_parameters(item) == 0 then
      return typedb:type_constructor(item)
    end
  end
  return "!NO MATCH"
end

typedb:scope( {1,100} )
defineVariable( "X")
typedb:scope( {10,50} )
defineVariable( "X")
typedb:scope( {20,30} )
defineVariable( "X")
typedb:scope( {70,90} )
defineVariable( "X")

typedb:step( 25)
print( "Retrieve X " .. findVariable("X"))
typedb:step( 45)
print( "Retrieve X " .. findVariable("X"))
typedb:step( 95)
print( "Retrieve X " .. findVariable("X"))
typedb:step( 100)
print( "Retrieve X " .. findVariable("X"))

Output

Retrieve X instance of scope {20,30}
Retrieve X instance of scope {10,50}
Retrieve X instance of scope {1,100}
Retrieve X !NOTFOUND

Conclusion

This was easy, wasn't it? What is missing now is how the current scope step and scope are set. I chose the variant of treating it as an own aspect. The function used for the AST tree traversal sets the current scope step and scope. This works for most cases. Sometimes you have to set the scope manually in nodes that implement declarations of different scopes, like for example function declarations with a function body in an own scope.

Reduction Weight

Now we have to look again at something a little bit puzzling. We have to assign a weight to reductions. The problem is that even trivial examples of type queries lead to ambiguity if we do not introduce a weighting schema that memorizes a preference. The typedb:resolvetype and typedb:derivetype functions are implemented as shortest path search that selects the result and implements this preference. Real ambiguity is something we want to detect as an error. An ambiguity is indicated when two or more results are appearing having the same weight sum. I concluded that it is best to declare all reduction weights at one central place in the source and to document it well.

Let's have a look at an example without weighting of reductions that will lead to ambiguity.

Failing example

File intro/tutorial/weight1.lua

Lua
mewa = require "mewa"
typedb = mewa.typedb()

-- Build a constructor
function applyConstructor( constructor, this, arg)
  if constructor then
    if (type(constructor) == "function") then
      return constructor( this, arg)
    else
      return constructor
    end
  else
    return this
  end
end

-- Type list as string
function typeListString( tpList, separator)
  if not tpList or #tpList == 0 then return "" end
  local tp = type(tpList[ 1]) == "table" and tpList[ 1].type or tpList[ 1]
  local rt = typedb:type_string( tp)
  for ii=2,#tpList do
    local tp = type(tpList[ ii]) == "table" and tpList[ ii].type or tpList[ ii]
    rt = rt .. separator .. typedb:type_string( tp)
  end
  return rt
end

-- Define a type with all its variations having different qualifiers
function defineType( name)
  local valTypeId = typedb:def_type( 0, name)
  local refTypeId = typedb:def_type( 0, name .. "&")
  local c_valTypeId = typedb:def_type( 0, "const " .. name)
  local c_refTypeId = typedb:def_type( 0, "const " .. name .. "&")
  typedb:def_reduction( valTypeId, refTypeId,
    function( arg) return "load ( " .. arg .. ")"  end, 1)
  typedb:def_reduction( c_valTypeId, c_refTypeId,
    function( arg) return "load ( " .. arg .. ")"  end, 1)
  typedb:def_reduction( c_valTypeId, valTypeId,
    function( arg) return "make const ( " .. arg .. ")"  end, 1)
  typedb:def_reduction( c_refTypeId, refTypeId,
    function( arg) return "make const ( " .. arg .. ")"  end, 1)
  return {val=valTypeId, ref=refTypeId, c_val=c_valTypeId, c_ref=c_refTypeId}
end

local t_int = defineType( "int")
local t_long = defineType( "long")

typedb:def_reduction( t_int.val, t_long.val,
  function( arg) return "convert int ( " .. arg .. ")"  end, 1)
typedb:def_reduction( t_int.c_val, t_long.c_val,
  function( arg) return "convert const int ( " .. arg .. ")"  end, 1)
typedb:def_reduction( t_long.val, t_int.val,
  function( arg) return "convert long ( " .. arg .. ")"  end, 1)
typedb:def_reduction( t_long.c_val, t_int.c_val,
  function( arg) return "convert const long ( " .. arg .. ")" end, 1)

local reductions,weight,altpath = typedb:derive_type( t_int.c_val, t_long.ref)
if not weight then
  print( "Not found!")
elseif altpath then
  print( "Ambiguous: "
    .. typeListString( reductions, " -> ")
    .. " | " .. typeListString( altpath, " -> "))
else
  local constructor = typedb:type_name( t_long.ref)
  for _,redu in ipairs(reductions or {}) do
    constructor = applyConstructor( redu.constructor, constructor)
  end
  print( constructor)
end

Output

Ambiguous: long -> const long -> const int | long -> int -> const int

Adding weights

File intro/tutorial/weight2.lua

Here is a diff with the edits we have to make for fixing the problem:

3a4,12
> -- Centralized list of the ordering of the reduction rule weights:
> local weight_conv=  1.0    -- weight of a conversion
> local weight_const_1=  0.5 / (1*1)  -- make const of type with 1 qualifier
> local weight_const_2=  0.5 / (2*2)  -- make const of type with 2 qualifiers
> local weight_const_3=  0.5 / (3*3)  -- make const of type with 3 qualifiers
> local weight_ref_1=  0.25 / (1*1)  -- strip reference of type with 1 qualifier
> local weight_ref_2=  0.25 / (2*2)  -- strip reference of type with 2 qualifiers
> local weight_ref_3=  0.25 / (3*3)  -- strip reference of type with 3 qualifiers
> 
36c45
<     function( arg) return "load ( " .. arg .. ")"  end, 1)
---
>     function( arg) return "load ( " .. arg .. ")"  end, 1, weight_ref_2)
38c47
<     function( arg) return "load ( " .. arg .. ")"  end, 1)
---
>     function( arg) return "load ( " .. arg .. ")"  end, 1, weight_ref_1)
40c49
<     function( arg) return "make const ( " .. arg .. ")"  end, 1)
---
>     function( arg) return "make const ( " .. arg .. ")"  end, 1, weight_const_1)
42c51
<     function( arg) return "make const ( " .. arg .. ")"  end, 1)
---
>     function( arg) return "make const ( " .. arg .. ")"  end, 1, weight_const_2)
50c59
<   function( arg) return "convert int ( " .. arg .. ")"  end, 1)
---
>   function( arg) return "convert int ( " .. arg .. ")"  end, 1, weight_conv)
52c61
<   function( arg) return "convert const int ( " .. arg .. ")"  end, 1)
---
>   function( arg) return "convert const int ( " .. arg .. ")"  end, 1, weight_conv)
54c63
<   function( arg) return "convert long ( " .. arg .. ")"  end, 1)
---
>   function( arg) return "convert long ( " .. arg .. ")"  end, 1, weight_conv)
56c65
<   function( arg) return "convert const long ( " .. arg .. ")" end, 1)
---
>   function( arg) return "convert const long ( " .. arg .. ")" end, 1, weight_conv)

Output with weights

convert const int ( load ( make const ( long&)))

Conclusion

We introduced a 5th parameter of the typedb:def_reduction command that is 0 if not specified. This new parameter is meant to be declared in a way that it memorizes a preference of solution paths. The weights should be referenced by constants we declare at a central place where the trains of thought that led to the weighting schema are documented.

Reduction Tag

The display of the type system as one graph is not enough for all cases. There are type derivation paths that are fitting in one case and undesirable in other cases. The following example declares an object of a class derived from a base class that calls a constructor function with no arguments. The constructor function is only declared for the base class. But when calling an object constructor an error should be reported if it does not exist for the class. The same behavior as for a method call is bad in this case.

Let's first look at an example failing:

Failing example

File intro/tutorial/tags1.lua

Lua
mewa = require "mewa"
typedb = mewa.typedb()

-- Define some helper functions, that we discussed already before

function constructor_format( fmt, argtable)
  return (fmt:gsub("[{]([_%d%w]*)[}]",
    function( match) return argtable[ match] or "" end))
end

function register_allocator()
  local i = 0
  return function ()
    i = i + 1
    return "%R" .. i
  end
end

function applyConstructor( constructor, this, arg)
  if constructor then
    if (type(constructor) == "function") then
      return constructor( this, arg)
    else
      return constructor
    end
  else
    return this
  end
end

-- Define some format strings for the LLVM code
local fmt_load = "{out} = load %{name}, %{name}* {this}\n"
local fmt_member = "{out} = getelementptr inbounds %{name}, "
      .. "%{name}* {this}, i32 0, i32 {index}\n"
local fmt_init = "call void @__ctor_init_{name}( %{name}* {this})\n"

-- Define a type with variations having different qualifiers
function defineType( name)
  local valTypeId = typedb:def_type( 0, name)
  local refTypeId = typedb:def_type( 0, name .. "&")
  typedb:def_reduction( valTypeId, refTypeId,
    function(this)
      local out = register()
      local code = constructor_format( fmt_load, {name=name,out=out,this=this.out})
      return {out=out, code=code}
    end, 1)
  return {val=valTypeId, ref=refTypeId}
end

local register = register_allocator()

-- Constructor for loading a member reference
function loadMemberConstructor( classname, index)
  return function( this)
    local out = register()
    local subst = {out=out,this=this.out,name=classname,index=index}
    local code = (this.code or "") .. constructor_format( fmt_member, subst)
    return {code=code, out=out}
  end
end
-- Constructor for calling the default ctor, assuming that it exists
function callDefaultCtorConstructor( classname)
  return function(this)
    local code = (this.code or "") .. (arg[1].code or "")
      .. constructor_format( fmt_init, {this=this.out,name=classname})
    return {code=code, out=out}
  end
end

local t_base = defineType("baseclass")
local t_class = defineType("class")

-- Define the default ctor of baseclass
local ctor = callDefaultCtorConstructor("baseclass")
local constructor_base = typedb:def_type( t_base.ref, "constructor", ctor)

-- Define the inheritance of class from baseclass
local load_base = loadMemberConstructor( "class", 1)
typedb:def_reduction( t_base.ref, t_class.ref, load_base, 1)

-- Search for the constructor of class (that does not exist)
local resolveTypeId, reductions, items
  = typedb:resolve_type( t_class.ref, "constructor")
if not resolveTypeId then
  print( "Not found")
elseif type( resolveTypeId) == "table" then
  print( "Ambiguous")
end

for _,item in ipairs(items or {}) do
  print( "Found " .. typedb:type_string( item) .. "\n")
end

Output

Found baseclass& constructor

Adding tags

File intro/tutorial/tags2.lua

Here is a diff with the edits we have to make for fixing the problem:

3a4,17
> -- [1] Define all tags and tag masks
> -- Tags attached to reductions.
> -- When resolving a type or deriving a type,
> --  we select reductions by specifying a set of valid tags
> tag_typeDeclaration = 1  -- Type declaration relation (e.g. variable to data type)
> tag_typeDeduction   = 2  -- Type deduction (e.g. inheritance)
> 
> -- Sets of tags used for resolving a type or deriving a type
> tagmask_declaration
>   = typedb.reduction_tagmask( tag_typeDeclaration)
> tagmask_resolveType
>   = typedb.reduction_tagmask( tag_typeDeduction, tag_typeDeclaration)
> 
> 
46c60
<     end, 1)
---
>     end, tag_typeDeduction)
79c93
< typedb:def_reduction( t_base.ref, t_class.ref, load_base, 1)
---
> typedb:def_reduction( t_base.ref, t_class.ref, load_base, tag_typeDeduction)
83c97
<   = typedb:resolve_type( t_class.ref, "constructor")
---
>   = typedb:resolve_type( t_class.ref, "constructor", tagmask_declaration)

Output with tags

Not found

Conclusion

We explained now the 4th parameter of the typedb:def_reduction defined as 1 in the first examples. It is the mandatory tag assigned to the reduction. The command typedb.reduction_tagmask is used to declare named sets of tags selected for resolving and deriving types.

Remark

typedb:derive_type has a second optional tag mask parameter that selects reductions to count and limit to a specified number, 1 by default. The aim behind that is to allow restrictions on some classes of reductions. Most statically typed programming languages impose restrictions on the number of conversions of a parameter. The second tag mask helps you to implement such restrictions.

Objects with a Scope

In a compiler, we have building blocks that are bound to a scope. For example functions. These building blocks are best represented as objects. If we are in the depth of an AST tree traversal we would like to have a way to address these objects without complicated structures passed down as parameters. This would be very error-prone. Especially in a non strictly typed language as Lua.

Introduction

Define object instance in the current scope
typedb:set_instance( name, obj)
Get the object instance of this or the nearest enclosing scope
obj = typedb:get_instance( name)
Get the object instance declared of the current scope
obj = typedb:this_instance( name)

Source

Lua
mewa = require "mewa"
typedb = mewa.typedb()

-- Attach a data structure for a callable to its scope
function defineCallableEnvironment( name)
  local env = {name=name, scope=(typedb:scope())}
  if typedb:this_instance( "callenv") then
    error( "Callable environment defined twice")
  end
  typedb:set_instance( "callenv", env)
  return env
end
-- Get the active callable name
function getFunctionName()
  return typedb:get_instance( "callenv").name
end

typedb:scope( {1,100} )
defineCallableEnvironment( "function X")
typedb:scope( {20,30} )
defineCallableEnvironment( "function Y")
typedb:scope( {70,90} )
defineCallableEnvironment( "function Z")

typedb:step( 10)
print( "We are in " .. getFunctionName())
typedb:step( 25)
print( "We are in " .. getFunctionName())
typedb:step( 85)
print( "We are in " .. getFunctionName())

Output

We are in function X
We are in function Y
We are in function Z

Conclusion

The possibility of attaching named objects to a scope is a big deal for readability, an important property for prototyping. It brings structure into a system in an interpreter context where we have few possibilities to ensure safety by contracts.

Control Structures, Implementing an IF

The next step is implementing an IF and to introduce a new class of type. Most programming languages require that the evaluation of a boolean expression stops when its outcome is determined. An expression like if ptr && ptr->value() should not crash in the case ptr is a NULL pointer.

Introduction

For evaluating boolean expressions and as condition type of conditionals we define two new types.

Control True Type

This type has a field code holding the code executed as long as it evaluates to true and a field out with the unbound label where the control branches to in case of evaluating to false.

Control False Type

This type is the mirror type of the control true type. It has a field code holding the code that is executed as long as it evaluates to false and a field out with the unbound label where the control branches to in case of evaluating to true.

The IF statement

The IF takes the condition argument and transforms it into a control true type. The code of the resulting constructor is joined with the constructor code of the statements to evaluate in the case the condition is true. The unbound label is bound and declared at the end of the code.

Source

Lua
mewa = require "mewa"
typedb = mewa.typedb()

-- Define some helper functions, that we discussed already before

function constructor_format( fmt, argtable)
  return (fmt:gsub("[{]([_%d%w]*)[}]",
    function( match) return argtable[ match] or "" end))
end

function register_allocator()
  local i = 0
  return function ()
    i = i + 1
    return "%R" .. i
  end
end

-- Label allocator is the analogon to the register_allocator but for labels
function label_allocator()
  local i = 0
  return function ()
    i = i + 1
    return "L" .. i
  end
end

function applyConstructor( constructor, this, arg)
  if constructor then
    if (type(constructor) == "function") then
      return constructor( this, arg)
    else
      return constructor
    end
  else
    return this
  end
end

local register = register_allocator()
local label = label_allocator()

local controlTrueType = typedb:def_type( 0, " controlTrueType")
local controlFalseType = typedb:def_type( 0, " controlFalseType")
local scalarBooleanType = typedb:def_type( 0, "bool")

local fmt_conditional = "br i1 {inp}, label %{on}, label %{out}\n{on}:\n"
local fmt_bindlabel = "br label {out}\n{out}:\n"

-- Build a control true type from a boolean value
local function booleanToControlTrueType( constructor)
  local true_label = label()
  local false_label = label()
  local subst = {inp=constructor.out, out=false_label, on=true_label}
  return {code = constructor.code .. constructor_format( fmt_conditional, subst),
    out = false_label}
end
-- Build a control false type from a boolean value
local function booleanToControlFalseType( constructor)
  local true_label = label()
  local false_label = label()
  local subst = {inp=constructor.out, out=true_label, on=false_label}
  return {code = constructor.code .. constructor_format( fmt_conditional, subst),
    out = true_label}
end

typedb:def_reduction( controlTrueType, scalarBooleanType,
      booleanToControlTrueType, 1)
typedb:def_reduction( controlFalseType, scalarBooleanType,
      booleanToControlFalseType, 1)

-- Implementation of an 'if' statement
--   condition is a type/constructor pair,
--   block a constructor, return value is a constructor
function if_statement( condition, block)
  local reductions,weight,altpath
    = typedb:derive_type( controlTrueType, condition.type)
  if not weight then error( "Type not usable as conditional") end
  if altpath then error("Ambiguous") end
  local constructor = condition.constructor
  for _,redu in ipairs(reductions or {}) do
    constructor = applyConstructor( redu.constructor, constructor)
  end
  local code = constructor.code .. block.code
      .. constructor_format( fmt_bindlabel, {out=constructor.out})
  return {code=code}
end

local condition_in = register()
local condition_out = register()
local condition = {
  type=scalarBooleanType,
  constructor={code = constructor_format( "{out} = icmp ne i32 {this}, 0\n",
        {out=condition_out,this=condition_in}), out=condition_out}
}
local block = {code = "... this code is executed if the value in "
      .. condition_in .. " is not 0 ...\n"}

print( if_statement( condition, block).code)

Output

%R2 = icmp ne i32 %R1, 0
br i1 %R2, label %L1, label %L2
L1:
... this code is executed if the value in %R1 is not 0 ...
br label L2
L2:

Conclusion

Control structures are implemented by constructing the control boolean types required. Boolean operators as the logical AND or the logical OR are constructed by wiring control boolean types types with other types together. This has not been done in this example, but it is imaginable after constructing an IF. The construction of types with reduction rules does not stop here. Control structures are not entirely different animals.

We have seen the whole variety of functions of the typedb library now. The remaining functions not explained yet are convenient functions to set and get attributes of types. There is nothing substantial left to explain about the API though there is a lot more to talk about best practices and how to use this API.

I think we are now ready to look at our example compiler as a whole.

Example Language Grammar

Now we will take a look at the grammar of the example language.

Parser Generator

Mewa implements an LALR(1) parser generator. The source file of the attributed grammar has 3 parts.

  • Some configurations marked with the prefix '%'.
  • The tokens defined as name/pattern pair. The pattern is defined as a regular expression matching the lexeme. Optionally, an index selecting a sub-match as the token value can be specified.
  • An attributed grammar with keywords as strings and token names or production names as identifiers.

Production Attribute Operators

  • The operator >> in the production attributes in oval brackets on the right side increments the scope-step.
  • The operator {} in the production attributes defines a scope.

Production Head Attributes

The attributes L1,L2,... are defining the production to be left-associative with a priority specified as a number. The attributes R1,R2,... are defining the production to be right-associative with a priority specified as a number. A greater priority number means a higher priority. Production priorities are used to define operator precedence.

Source

% LANGUAGE intro;
% TYPESYSTEM "intro/typesystem";
% CMDLINE "cmdlinearg";
% COMMENT "/*" "*/";
% COMMENT "//";

BOOLEAN : '((true)|(false))';
IDENT    : '[a-zA-Z_]+[a-zA-Z_0-9]*';
DQSTRING: '["]((([^\\"\n]+)|([\\][^"\n]))*)["]' 1;
UINTEGER: '[0123456789]+';
FLOAT    : '[0123456789]*[.][0123456789]+';
FLOAT    : '[0123456789]*[.][0123456789]+[Ee][+-]{0,1}[0123456789]+';

program
          = extern_deflist free_deflist main_proc   (program)
          ;
extern_deflist
          = extern_def extern_deflist
          |
          ;
free_deflist
          = free_def free_deflist
          |
          ;
inclass_deflist
          = inclass_def inclass_deflist
          |
          ;
extern_def
          = "extern" "function" IDENT typespec
               "(" extern_paramlist ")" ";"         (extern_funcdef)
          ;
extern_paramdecl
          = typespec IDENT                          (extern_paramdef)
          | typespec                                (extern_paramdef)
          ;
extern_parameters
          = extern_paramdecl "," extern_parameters
          | extern_paramdecl
          ;
extern_paramlist
          = extern_parameters                       (extern_paramdeflist)
          |                                         (extern_paramdeflist)
          ;
inclass_def
          = variabledef ";"                         (definition 2)
          | classdef                                (definition 1)
          | functiondef                             (definition_2pass 4)
          ;
free_def
          = variabledef ";"                         (definition 1)
          | classdef                                (definition 1)
          | functiondef                             (definition 1)
          ;
typename/L1
          = IDENT
          | IDENT "::" typename
          ;
typehdr/L1
          = typename                                (typehdr)
          ;
typegen/L1
          = typehdr
          | typegen "[" UINTEGER "]"                (arraytype)
          ;
typespec/L1
          = typegen                                 (typespec)
          ;
classdef
          = "class" IDENT "{" inclass_deflist "}"   (>>classdef)
          ;
functiondef
          = "function" IDENT typespec callablebody  (funcdef)
          ;
callablebody
          = "(" impl_paramlist ")"
                  "{" statementlist "}"             ({}callablebody)
          ;
main_proc
          = "main" codeblock                        (main_procdef)
          |
          ;
impl_paramlist
          = impl_parameters                         (paramdeflist)
          |                                         (paramdeflist)
          ;
impl_parameters
          = impl_paramdecl "," impl_parameters
          | impl_paramdecl
          ;
impl_paramdecl
          = typespec IDENT                          (paramdef)
          ;
codeblock/L1
          = "{" statementlist "}"                   ({}codeblock)
          ;
statementlist/L1
          = statement statementlist                 (>>)
          |
          ;
elseblock/L1
          = "elseif" "(" expression ")"
                  codeblock elseblock               (conditional_elseif)
          | "elseif" "(" expression ")" codeblock   (conditional_elseif)
          | "else" codeblock                        (conditional_else)
          ;
statement/L1
          = classdef                                (definition 1)
          | functiondef                             (definition 1)
          | "var" variabledef ";"                   (>>definition 1)
          | expression ";"                          (free_expression)
          | "return" expression ";"                 (>>return_value)
          | "return" ";"                            (>>return_void)
          | "if" "(" expression ")"
               codeblock elseblock            (conditional_if)
          | "if" "(" expression ")" codeblock       (conditional_if)
          | "while" "(" expression ")" codeblock    (conditional_while)
          | codeblock
          ;
variabledef
          = typespec IDENT                          (>>vardef)
          | typespec IDENT "=" expression           (>>vardef)
          ;
expression/L1
          = "{" expressionlist "}"                  (>>structure)
          | "{" "}"                                 (>>structure)
          ;
expression/L2
          = IDENT                                   (variable)
          | BOOLEAN                                 (constant "constexpr bool")
          | UINTEGER                                (constant "constexpr int")
          | FLOAT                                   (constant "constexpr double")
          | DQSTRING                                (constant "constexpr string")
          | "(" expression ")"
          ;
expression/L3
          = expression  "="  expression             (>>binop "=")
          ;
expression/L4
          = expression  "||"  expression            (>>binop "||")
          ;
expression/L5
          = expression  "&&"  expression            (>>binop "&&")
          ;
expression/L8
          = expression  "=="  expression            (>>binop "==")
          | expression  "!="  expression            (>>binop "!=")
          | expression  "<="  expression            (>>binop "<=")
          | expression  "<"  expression             (>>binop "<")
          | expression  ">="  expression            (>>binop ">=")
          | expression  ">"  expression             (>>binop ">")
          ;
expression/L9
          = expression  "+"  expression             (>>binop "+")
          | expression  "-"  expression             (>>binop "-")
          | "-"  expression                         (>>unop "-")
          | "+"  expression                         (>>unop "+")
          ;
expression/L10
          = expression  "*"  expression             (>>binop "*")
          | expression  "/"  expression             (>>binop "/")
          ;
expression/L12
          = expression "." IDENT                    (member)
          ;
expression/L13
          = expression  "(" expressionlist ")"      (>>operator "()")
          | expression  "(" ")"                     (>>operator "()")
          | expression  "[" expressionlist "]"      (>>operator "[]")
          ;
expressionlist/L0
          = expression "," expressionlist
          | expression
          ;

Type System

Now let's overview the implementation of the typesystem module that generates the code. The code shown now will be more organized, more complete, but in contrary to the tutorial not self-contained anymore.

In contrast to the example language1 the typesystem module has been split into several parts of 100 lines of code at most to make them digestible. The snippets implementing helper functions are in the directory examples/intro/sections. The snippets implementing the functions attached to the AST nodes are in the directory examples/intro/ast.

Because of the amount of code in this part, we will not inspect it so closely as in the tutorial anymore. But I hope that after the tutorial you will still get a grip on the code shown.

Header

Let's first take a look at the header of typesystem.lua.

Submodule llvmir

The submodule llvmir implements all templates for the LLVM IR code generation. We saw such templates like {out} = load i32, i32* {this} with substitutes in curly brackets in the examples of the tutorial. In the example compiler, these templates are all declared in the module llvmir and referred to by name. The module llvmir has a submodule llvmir_scalar that is generated from a description of the scalar types of our language.

llvmir.lua

You see here one example definition of the file llvmir.lua. Numbers in curly brackets '{' '}' are substituted by values auto-generated by a register allocator. Identifiers have to be provided explicitly in a table.

llvmir.structTemplate = {
    symbol = "{symbol}",
    def_local = "{out} = alloca %{symbol}, align 8\n",
    def_global = "{out} = internal global %{symbol} zeroinitializer, align 8\n",
    llvmtype = "%{symbol}",
    scalar = false,
    class = "struct",
    align = 8,
    assign = "store %{symbol} {arg1}, %{symbol}* {this}\n",
    load = "{out} = load %{symbol}, %{symbol}* {this}\n",
    loadelemref = "{out} = getelementptr inbounds %{symbol},"
                .. " %{symbol}* {this}, i32 0, i32 {index}\n",
    loadelem = "{1} = getelementptr inbounds %{symbol},"
                .. " %{symbol}* {this}, i32 0, i32 {index}\n"
                .. "{out} = load {type}, {type}* {1}\n",
    typedef = "%{symbol} = type { {llvmtype} }\n"
}

Submodule utils

The submodule typesystem_utils implements functions that are language independent. For example the function constructor_format instantiatiating the llvmir code templates in the tutorial. It is implemented in the module typesystem_utils in a more powerful form. String encoding, mangling, and AST tree traversal functions are other examples of functions provided there.

Global variables

The approach of Mewa is not pure. Things are stored in the typedb if it helps. For most other things we use global variables. The header of typesystem.lua has about a dozen global variables declared. In the example language1 there are around 50 variables defined. For example typeDescriptionMap, a map that associates every type with a table containing the code generation templates for this type.

Source

Lua
mewa = require "mewa"
local utils = require "typesystem_utils"
llvmir = require "llvmir"
typedb = mewa.typedb()

-- Global variables
localDefinitionContext = 0    -- Context type of local definitions
seekContextKey = "seekctx"    -- Key for seek context types defined for a scope
callableEnvKey = "env"        -- Key for current callable environment
typeDescriptionMap = {}       -- Map of type ids to their description
referenceTypeMap = {}         -- Map of value type to reference type
dereferenceTypeMap = {}       -- Map of reference type to value type
arrayTypeMap = {}             -- Map array key to its type
stringConstantMap = {}        -- Map of string constant value to its attributes
scalarTypeMap = {}            -- Map of scalar type name to its value type

dofile( "examples/intro/sections.inc")

-- AST Callbacks:
typesystem = {}
dofile( "examples/intro/ast.inc")
return typesystem

Output

The output of our compiler front-end is printed with the functions print and print_section defined by the compiler. The function print is redirected to a function appending to the Code section of the output. The sections are variables to substitute in the target files. The function print_section is appending to an output section specified as the first parameter.

AST Traversal

All AST node functions participate in the traversal as it is their responsibility to call the subnodes of the AST. I already mentioned in the tutorial that the current scope is implemented as an aspect on its own and set by the AST traversal function. The traversal functions are implemented in the typesystem_utils module. There are two variants of the traversal function:

  • function traverse( typedb, node, ...)
  • function traverseRange( typedb, node, range, ...)

The range is a pair of Lua array indices {first, last element of the range} referring to the subnodes to process for a partial traversal. Partial traversal is used for processing the subnodes selectively. You may for example traverse the function name and the parameters first, then declare the function, and then traverse the function body for enabling recursion. The variable arguments "..." are forwarded to the AST node functions called. This way you can pass parameters down to the subnodes. The examples of Mewa use parameters extensively. For example to pass down the declaration context that decides, whether a variable declaration is a member of a structure or a local or a global variable. Parameters are also used to implement multipass traversal or the AST to parse declarations of a subtree, e.g. a class in a specific order. You pass down the index of the pass you want to process in an AST node function. But be aware that this way of communicating is error-prone. You should restrict it to a bare minimum and use scope-bound data (typedb:set_instance, typedb:get_instance) or even global variables instead.

Source from typesystem_utils
Lua
-- Tree traversal helper function setting the current scope/step and
--    calling the function of one node, and returning its result:
local function processSubnode( typedb, subnode, ...)
    local rt
    if subnode.call then
        if (subnode.scope) then
            local scope_bk,step_bk = typedb:scope( subnode.scope)
            typedb:set_instance( "node", subnode)
            if subnode.call.obj then
                rt = subnode.call.proc( subnode, subnode.call.obj, ...)
            else
                rt = subnode.call.proc( subnode, ...)
            end
            typedb:scope( scope_bk,step_bk)
        elseif (subnode.step) then
            local step_bk = typedb:step( subnode.step)
            if subnode.call.obj then
                rt = subnode.call.proc( subnode, subnode.call.obj, ...)
            else
                rt = subnode.call.proc( subnode, ...)
            end
            typedb:step( step_bk)
        else
            if subnode.call.obj then
                rt = subnode.call.proc( subnode, subnode.call.obj, ...)
            else
                rt = subnode.call.proc( subnode, ...)
            end
        end
    else
        rt = subnode.value
    end
    return rt
end
-- Tree traversal or a subrange of argument nodes, define scope/step and
--    process the AST node:
function utils.traverseRange( typedb, node, range, ...)
    if node.arg then
        local rt = {}
        local start,last = table.unpack(range)
        local lasti,ofs = last-start+1,start-1
        for ii=1,lasti do
    rt[ ii] = processSubnode( typedb, node.arg[ ofs+ii], ...)
  end
        return rt
    else
        return node.value
    end
end
-- Tree traversal, define scope/step and process the AST node:
function utils.traverse( typedb, node, ...)
    if node.arg then
        local rt = {}
        for ii,subnode in ipairs(node.arg) do
            rt[ii] = processSubnode( typedb, subnode, ...)
        end
        return rt
    else
        return node.value
    end
end

AST Node functions

Now we will visit the functions attchached to the AST nodes. I split them into snippets covering different aspects. Most of the code is just delegating to functions we will inspect in the following section.

Constants

Define atomic and structure constants in the source.

Structures, e.g. Initializer Lists

A structure has a list of type/constructor pairs as the constructor. This resembles the parameter list of a function and that's what it is. For recursive initialization of objects from initializer lists, we declare a reduction from the type constexprStructureType to any object being initializable by a constant structure. The constructor is using the typedb to find a ctor type with this list matching the parameter list. If it fails the constructor function returns nil to indicate that it failed and that the solution relying on this reduction should be dropped. This kind of enveloping helps us to map initializer lists recursively.

Lua
function typesystem.constant( node, decl)
    local typeId = scalarTypeMap[ decl]
    local constructor = createConstexprValue( typeId, node.arg[1].value)
    return {type=typeId,constructor=constructor}
end
function typesystem.structure( node)
    local args = utils.traverse( typedb, node)
    return {type=constexprStructureType, constructor={list=args}}
end

Variables

In this section are the node functions to define and query variables. These AST node functions are just delegating to functions we will revisit later.

Lua
function typesystem.vardef( node, context)
    local datatype,varnam,initval
        = table.unpack( utils.traverse( typedb, node, context))
    return defineVariable( node, context, datatype, varnam, initval)
end
function typesystem.variable( node)
    local varname = node.arg[ 1].value
    return getVariable( node, varname)
end

Extern Function Declarations

Here are the extern function declarations with their parameters processed. The function typesystem.extern_funcdef calls the tree traversal to get the function name and the parameters. The collecting of the parameters is possible in different ways. Here a table is defined by the node that declares the parameter list, passed down as a parameter to the recursive list declaration, and filled by the parameter declaration node typesystem.extern_paramdef. The function call definition with defineFunctionCall is the same as for free functions and class methods.

Lua
function typesystem.extern_funcdef( node)
    local context = {domain="global"}
    local name,ret,param = table.unpack( utils.traverse( typedb, node, context))
    if ret == voidType then ret = nil end
    -- ... void type as return value means we are in a procedure without return
    local descr = {
            name = name,
            symbolname = name,
            func ='@' .. name,
            ret =ret,
            param = param,
            signature="" }
    descr.rtllvmtype = ret and typeDescriptionMap[ ret].llvmtype or "void"
    defineFunctionCall( node, descr, context)
    local fmt = llvmir.control.extern_functionDeclaration
    print_section( "Typedefs", utils.constructor_format( fmt, descr))
end
function typesystem.extern_paramdef( node, param)
    local typeId = table.unpack( utils.traverseRange( typedb, node, {1,1}, context))
    local descr = typeDescriptionMap[ typeId]
    if not descr then
        utils.errorMessage( node.line,
            "Type '%s' not allowed as parameter of extern function",
            typedb:type_string( typeId))
    end
    table.insert( param, {type=typeId,llvmtype=descr.llvmtype})
end
function typesystem.extern_paramdeflist( node)
    local param = {}
    utils.traverse( typedb, node, param)
    return param
end

Data Types

This section defines classes, arrays and atomic data types. The function we have to discuss a little bit deeper here is typesystem.classdef, the definition of a class:

  1. The context is changed. Whatever is passed to this AST node function as context, we define a new context (classContext) to be passed down to the subnodes in the traversal. The context is a structure a field domain that tells if we are inside the definition of a class ("member"), if we are in the body of a function ("local"), or if we are not inside any structure ("global"). It has other fields too depending on the context. It is also used to collect data in classes. (structsize,members) from its subnodes.
  2. The traversal of the subnodes has 4 passes. The index of the pass is passed down as a parameter for the subnodes to decide what to do:
    • 1st Pass: Type Definitions
    • 2nd Pass: Member Variable Declarations
    • 3rd Pass: Method Declarations (the traversal calls 1st pass of function declarations)
    • 4th Pass: Method Implementation (the traversal calls the 2nd pass of function declarations)

The class node defines a multiple pass evaluation and the nodes typesystem.definition_2pass and typesystem.definition implement the gates that encapsulate the decision what is processed when.

Lua
function typesystem.typehdr( node, decl)
    return resolveTypeFromNamePath( node, utils.traverse( typedb, node))
end
function typesystem.arraytype( node)
    local dim = tonumber( node.arg[2].value)
    local elem = table.unpack( utils.traverseRange( typedb, node, {1,1}))
    return {type=getOrCreateArrayType( node, expectDataType( node, elem), dim)}
end
function typesystem.typespec( node)
    return expectDataType( node, table.unpack( utils.traverse( typedb, node)))
end
function typesystem.classdef( node, context)
    local typnam = node.arg[1].value
    local declContextTypeId = getDeclarationContextTypeId( context)
    pushSeekContextType( declContextTypeId)
    local tpl = llvmir.structTemplate
    local typeId,descr = defineStructureType( node, declContextTypeId, typnam, tpl)
    local classContext = {domain="member", decltype=typeId, members={}, descr=descr}
    utils.traverse( typedb, node, classContext, 1)    -- 1st pass: type definitions
    utils.traverse( typedb, node, classContext, 2)    -- 2nd pass: member variables
    descr.size = classContext.structsize
    descr.members = classContext.members
    defineClassStructureAssignmentOperator( node, typeId)
    utils.traverse( typedb, node, classContext, 3)    -- 3rd pass: method decl
    utils.traverse( typedb, node, classContext, 4)    -- 4th pass: method impl
    local subst = {llvmtype=classContext.llvmtype}
    print_section( "Typedefs", utils.constructor_format( descr.typedef, subst))
    popSeekContextType( declContextTypeId)
end
function typesystem.definition( node, pass, context, pass_selected)
    if not pass_selected or pass == pass_selected then    -- pass as in the grammar
        local statement = table.unpack(
            utils.traverse( typedb, node, context or {domain="local"}))
        return statement and statement.constructor or nil
    end
end
function typesystem.definition_2pass( node, pass, context, pass_selected)
    if not pass_selected then
        return typesystem.definition( node, pass, context, pass_selected)
    elseif pass == pass_selected+1 then
        utils.traverse( typedb, node, context, 1)     -- 3rd pass: method decl
    elseif pass == pass_selected then
        utils.traverse( typedb, node, context, 2)    -- 4th pass: method impl
    end
end

Function Declarations

Now we have a look at functions that are implemented in the source file processed. The traversal is split into two passes, the declaration and implementation as already mentioned in the data type section. A helper function utils.allocNodeData attaches the function description created in the first pass to the node. The function utils.getNodeData references it in the second pass. At the end of the 2nd pass, the LLVM function declaration is printed to the output. The constructor of the function call and the function type with its parameters have already been declared in the 1st pass.

To mention is also the call of defineCallableEnvironment that creates a structure referred to as callable environment and binds it to the scope of the function body. We have seen in the tutorial how this works (Objects with a Scope). The callable environment structure contains all function-related data like the return type, the register allocator, etc. It is accessed with the function getCallableEnvironment.

The AST node function typesystem.callablebody collects the elements of the free function or class method description in the scope of the callable body. It collects the list of parameters in a similar way as the extern function declaration we have already seen.

Lua
function typesystem.funcdef( node, context, pass)
    local typnam = node.arg[1].value
    if not pass or pass == 1 then    -- 1st pass: function declaration
        local rtype = table.unpack(
                        utils.traverseRange( typedb, node, {2,2}, context))
        if rtype == voidType then rtype = nil end -- void return => procedure
        local symbolname = (context.domain == "member")
                    and (typedb:type_name(context.decltype) .. "__" .. typnam)
                    or typnam
        local rtllvmtype = rtype and typeDescriptionMap[ rtype].llvmtype or "void"
        local descr = {
                lnk = "internal",
                name = typnam,
                symbolname = symbolname,
                func = '@'..symbolname,
                ret = rtype,
                rtllvmtype = rtllvmtype,
                attr = "#0"}
        utils.traverseRange( typedb, node, {3,3}, context, descr, 1)
        utils.allocNodeData( node, localDefinitionContext, descr)
        defineFunctionCall( node, descr, context)
    end
    if not pass or pass == 2 then     -- 2nd pass: function implementation
        local descr = utils.getNodeData( node, localDefinitionContext)
        utils.traverseRange( typedb, node, {3,3}, context, descr, 2)
        if descr.ret then
            local rtdescr = typeDescriptionMap[descr.ret]
            local subst = {type=rtdescr.llvmtype,this=rtdescr.default}
            descr.body = descr.body
                .. utils.constructor_format( llvmir.control.returnStatement, subst)
        else
            descr.body = descr.body
                .. utils.constructor_format( llvmir.control.returnVoidStatement)
        end
        print( utils.constructor_format( llvmir.control.functionDeclaration, descr))
    end
end
function typesystem.callablebody( node, context, descr, selectid)
    local rt
    local context_ = {domain="local"}
    if selectid == 1 then -- parameter declarations
        local envname = "body " .. descr.name
        descr.env = defineCallableEnvironment( node, envname, descr.ret)
        descr.param = table.unpack(
                            utils.traverseRange( typedb, node, {1,1}, context_))
        descr.paramstr = getDeclarationLlvmTypeRegParameterString( descr, context)
    elseif selectid == 2 then -- statements in body
        if context.domain == "member" then
            expandMethodEnvironment( node, context, descr, descr.env)
        end
        local stmlist = utils.traverseRange( typedb, node, {2,#node.arg}, context_)
        local code = ""
        for _,statement in ipairs(stmlist) do code = code .. statement.code end
        descr.body = code
    end
    return rt
end
function typesystem.paramdef( node, param)
    local datatype,varname = table.unpack( utils.traverse( typedb, node, param))
    table.insert( param, defineParameter( node, datatype, varname))
end
function typesystem.paramdeflist( node, param)
    local param = {}
    utils.traverse( typedb, node, param)
    return param
end

Operators

This section defines the functions of AST nodes implementing operators. The construction of operators, member references, function calls are is redirected to the function applyCallable we will visit later. Function calls are implemented as operator "()" of a callable type. The functions expectValueType and expectDataType used here are assertions.

Lua
function typesystem.binop( node, operator)
    local this,operand = table.unpack( utils.traverse( typedb, node))
    expectValueType( node, this)
    expectValueType( node, operand)
    return applyCallable( node, this, operator, {operand})
end
function typesystem.unop( node, operator)
    local this = table.unpack( utils.traverse( typedb, node))
    expectValueType( node, operand)
    return applyCallable( node, this, operator, {})
end
function typesystem.member( node)
    local struct,name = table.unpack( utils.traverse( typedb, node))
    return applyCallable( node, struct, name)
end
function typesystem.operator( node, operator)
    local args = utils.traverse( typedb, node)
    local this = table.remove( args, 1)
    return applyCallable( node, this, operator, args)
end

Control Structures

As we learned in the tutorial, conditionals are implemented by wiring a control boolean type together with some code blocks. The control boolean type is derived from the condition type with getRequiredTypeConstructor.

The return node functions also use getRequiredTypeConstructor to derive the value returned from their argument. The return type is accessible in the callable environment structure.

Lua
function typesystem.conditional_if( node)
    local env = getCallableEnvironment()
    local exitLabel = env.label()
    local condition,yesblock,noblock
        = table.unpack( utils.traverse( typedb, node, exitLabel))
    local rt = conditionalIfElseBlock(
            node, condition, yesblock, noblock, exitLabel)
    rt.code = rt.code
        .. utils.constructor_format( llvmir.control.label, {inp=exitLabel})
    return rt
end
function typesystem.conditional_else( node, exitLabel)
    return table.unpack( utils.traverse( typedb, node))
end
function typesystem.conditional_elseif( node, exitLabel)
    local env = getCallableEnvironment()
    local condition,yesblock,noblock
        = table.unpack( utils.traverse( typedb, node, exitLabel))
    return conditionalIfElseBlock(
            node, condition, yesblock, noblock, exitLabel)
end
function typesystem.conditional_while( node)
    local env = getCallableEnvironment()
    local condition,yesblock = table.unpack( utils.traverse( typedb, node))
    local cond_constructor
        = getRequiredTypeConstructor(
            node, controlTrueType, condition,
            tagmask_matchParameter, tagmask_typeConversion)
    if not cond_constructor then
        utils.errorMessage( node.line, "Can't use type '%s' as a condition",
                    typedb:type_string(condition.type))
    end
    local start = env.label()
    local startcode = utils.constructor_format( llvmir.control.label, {inp=start})
    local subst = {out=start,inp=cond_constructor.out}
    return {code = startcode .. cond_constructor.code .. yesblock.code
            .. utils.constructor_format( llvmir.control.invertedControlType, subst)}
end
function typesystem.return_value( node)
    local operand = table.unpack( utils.traverse( typedb, node))
    local env = getCallableEnvironment()
    local rtype = env.returntype
    local descr = typeDescriptionMap[ rtype]
    expectValueType( node, operand)
    if rtype == 0 then
        utils.errorMessage( node.line, "Can't return value from procedure")
    end
    local this,code = constructorParts(
                getRequiredTypeConstructor(
                    node, rtype, operand,
                    tagmask_matchParameter, tagmask_typeConversion))
    local subst = {this=this, type=descr.llvmtype}
    return {code = code
            .. utils.constructor_format( llvmir.control.returnStatement, subst)}
end
function typesystem.return_void( node)
    local env = getCallableEnvironment()
    if env.returntype ~= 0 then
        utils.errorMessage( node.line, "Can't return without value from function")
    end
    local code = utils.constructor_format( llvmir.control.returnVoidStatement, {})
    return {code = code}
end

Blocks and the Rest

Finally, we come to the section containing the blocks that do not fit somewhere else.

  • The top-level node, the program, that does some initializations of the language before further processing by delegation with the traversal of the subnodes.
  • The main program node does not do a lot here as there are no program arguments and no program return value implemented here.
  • The node function typesystem.codeblock joins a list of statements to one constructor.
  • The node function typesystem.free_expression makes a statement node from an expression node.
Lua
function typesystem.program( node, options)
    defineConstExprArithmetics()
    defineConstExprTypeConversions()
    initBuiltInTypes()
    initControlBooleanTypes()
    local context = {domain="global"}
    utils.traverse( typedb, node, context)
end
function typesystem.main_procdef( node)
    local env = defineCallableEnvironment( node, "main ", scalarIntegerType)
    local block = table.unpack( utils.traverse( typedb, node, {domain="local"}))
    local subst = {type="i32",this="0"}
    local body = block.code
            .. utils.constructor_format( llvmir.control.returnStatement, subst)
    print( "\n" .. utils.constructor_format(
                llvmir.control.mainDeclaration, {body=body}))
end
function typesystem.codeblock( node)
    local stmlist = utils.traverse( typedb, node)
    local code = ""
    for _,stm in ipairs(stmlist) do code = code .. stm.code end
    return {code=code}
end
function typesystem.free_expression( node)
    local expression = table.unpack( utils.traverse( typedb, node))
    if expression.type == controlTrueType
            or expression.type == controlFalseType then
        return {code = expression.constructor.code
                .. utils.constructor_format(
                        llvmir.control.label,
                        {inp=expression.constructor.out})}
    else
        return {code=expression.constructor.code}
    end
end

Type System Functions

This chapter will survey the functions used in the AST node functions we have now seen. They are also split into snippets covering different aspects.

Reduction Weights

Here are all the reduction weights of the reductions defined. We have explained the need for weighting reductions in the tutorial.

-- List of reduction weights:
rdw_conv = 1.0               -- Weight of conversion
rdw_constexpr_float = 0.375  -- Conversion of constexpr float -> int or int -> float
rdw_constexpr_bool = 0.50    -- Conversion of constexpr num -> bool or bool -> num
rdw_load = 0.25              -- Weight of loading a value
rdw_strip_r_1 = 0.25 / (1*1) -- Weight of fetch value type with 1 qualifier
rdw_strip_r_2 = 0.25 / (2*2) -- Weight of fetch value type with 2 qualifiers
rdw_strip_r_3 = 0.25 / (3*3) -- Weight of fetch value type with 3 qualifiers
rwd_control = 0.125 / (4*4)  -- Weight of control true/false type <-> bool

weightEpsilon = 1E-8         -- Epsilon used for comparing weights for equality

Reduction Tags and Tag Masks

This section defines all reduction tags and tag masks. We have explained the need for tagging in the tutorial.

Lua
-- Tags attached to reduction definitions
tag_typeDeclaration = 1   -- Type declaration relation (e.g. variable to data type)
tag_typeDeduction = 2     -- Type deduction (e.g. inheritance)
tag_typeConversion = 3    -- Type value conversion
tag_typeInstantiation = 4 -- Type value construction from const expression

-- Sets of tags used for resolving a type or deriving a type, depending on the case
tagmask_declaration = typedb.reduction_tagmask( tag_typeDeclaration)
tagmask_resolveType = typedb.reduction_tagmask(
                tag_typeDeduction, tag_typeDeclaration)
tagmask_matchParameter = typedb.reduction_tagmask(
                tag_typeDeduction, tag_typeDeclaration,
                tag_typeConversion, tag_typeInstantiation)
tagmask_typeConversion = typedb.reduction_tagmask( tag_typeConversion)

Type Declaration String

This function provides a signature string of the type including context type and parameter types. The signature string is used to refer to a type in error messages.

Lua
-- Type string of a type declaration built from its parts for error messages
function typeDeclarationString( this, typnam, args)
    local rt = (this == 0 or not this)
            and typnam
            or (typedb:type_string(type(this) == "table"
                    and this.type
                    or this
                ) .. " " .. typnam)
    if (args) then
        rt = rt .. "(" .. utils.typeListString( typedb, args) .. ")"
    end
    return rt
end

Calls and Promote Calls

Here are the functions to define calls with parameters and a return value. For first-class scalar types we often also need to look at the 2nd argument to determine the constructor function to call. Most statically typed programming languages specify a multiplication of an interger with a floating-point number as a multiplication of floating-point numbers. If we define the operator dependent on the first argument, we have to define the call int * double as the conversion of the first operand to a double followed by a double * double multiplication. I call these calls "promote-calls" (promoting the first argument to the type of the second argument) in the examples. The integer argument is promoted to a double and then the constructor function of double * double is called.

Lua
-- Constructor for a promote call (implementing int + double by promoting
--   the first argument int to double and do a double + double to get the result)
function promoteCallConstructor( call_constructor, promote)
    return function( this, arg)
        return call_constructor( promote( this), arg)
    end
end
-- Define an operation with involving the promotion of the left-hand argument to
--   another type and executing the operation as defined for the type promoted to.
function definePromoteCall( rType, thisType, proType, opr, argTypes, promote)
    local call_type = typedb:get_type( proType, opr, argTypes)
    local call_constructor = typedb:type_constructor( call_type)
    local constructor = promoteCallConstructor( call_constructor, promote)
    local callType = typedb:def_type( thisType, opr, constructor, argTypes)
    if callType == -1 then
        utils.errorMessage( node.line, "Duplicate definition '%s'",
                typeDeclarationString( thisType, opr, argTypes))
    end
    if rType then
        typedb:def_reduction( rType, callType, nil, tag_typeDeclaration)
    end
end
-- Define an operation generalized
function defineCall( rType, thisType, opr, argTypes, constructor)
    local callType = typedb:def_type( thisType, opr, constructor, argTypes)
    if callType == -1 then
        local declstr = typeDeclarationString( thisType, opr, argTypes)
        utils.errorMessage( 0, "Duplicate definition of call '%s'", declstr)
    end
    if rType then
        typedb:def_reduction( rType, callType, nil, tag_typeDeclaration)
    end
    return callType
end

Apply Constructors

This section defines the call of a constructor function. We got an impression of how this works in the tutorial (variable assignment). The functions tryApplyConstructor and applyConstructor are building a constructor by applying a constructor function on a list of arguments. The functions tryApplyReductionList and applyReductionList are building a constructor from a chain of reductions applied on a base constructor. The functions with the prefix try report a miss or an ambiguity with their return value instead of exiting with utils.errorMessage in case of an error.

Lua
-- Application of a constructor depending on its type and its argument type.
-- Return false as 2nd result on failure, true on success
function tryApplyConstructor( node, typeId, constructor, arg)
    if constructor then
        if (type(constructor) == "function") then
            local rt = constructor( arg)
            return rt, rt ~= nil
        elseif arg then
            utils.errorMessage( node.line,
                    "Reduction constructor overwriting constructor for '%s'",
                    typedb:type_string(typeId))
        else
            return constructor, true
        end
    else
        return arg, true
    end
end
-- Application of a constructor depending on its type and its argument type.
-- Throw error on failure.
function applyConstructor( node, typeId, constructor, arg)
    local result_constructor,success
        = tryApplyConstructor( node, typeId, constructor, arg)
    if not success then
        utils.errorMessage( node.line, "Failed to create type '%s'",
                    typedb:type_string(typeId))
    end
    return result_constructor
end
-- Try to apply a list of reductions on a constructor.
-- Return false as 2nd result on failure, true on success
function tryApplyReductionList( node, redulist, constructor)
    local success = true
    for _,redu in ipairs(redulist) do
        constructor,success
            = tryApplyConstructor( node, redu.type, redu.constructor, constructor)
        if not success then return nil end
    end
    return constructor, true
end
-- Apply a list of reductions on a constructor, throw error on failure
function applyReductionList( node, redulist, constructor)
    local success = true
    for _,redu in ipairs(redulist) do
        constructor,success
            = tryApplyConstructor(
                node, redu.type, redu.constructor, constructor)
        if not success then
            utils.errorMessage( node.line, "Reduction constructor failed for '%s'",
                        typedb:type_string(redu.type))
        end
    end
    return constructor
end

Resolve Types

Here are the functions for resolving types, mapping types, and asserting type properties.

  • The function selectNoArgumentType filters a resolve-type match without parameters, a variable, or a data type.
  • The function resolveTypeFromNamePath resolves a type from structure name path ( classname1 "::" classname2 ...).
  • The function tryGetWeightedParameterReductionList get the reduction of for a parameter matching and its weight. The weight can be used to accumulate the weight of a function match as a whole to determine the best match. In the example languages, the maximum is used as the accumulation function for the weight of the function match.
  • The function getRequiredTypeConstructor derives a type from another type. We saw applications of this function in the implementation of return or conditionals like if, while, etc.
  • The function expectValueType asserts that the argument type has a constructor. This means it is a value type.
  • The function expectDataType asserts that the argument type has no constructor. This means it is a data type.
Lua
-- Get the handle of a type expected to have no arguments
function selectNoArgumentType(
        node, seekctx, typeName, tagmask, resolveContextType, reductions, items)
    if not resolveContextType or type(resolveContextType) == "table" then
        io.stderr:write( "TRACE typedb:resolve_type\n"
                .. utils.getResolveTypeTrace( typedb, seekctx, typeName, tagmask)
                .. "\n")
        utils.errorResolveType( typedb, node.line,
                      resolveContextType, seekctx, typeName)
    end
    for ii,item in ipairs(items) do
        if typedb:type_nof_parameters( item) == 0 then
            local constructor = applyReductionList( node, reductions, nil)
            local item_constr = typedb:type_constructor( item)
            constructor = applyConstructor( node, item, item_constr, constructor)
            return item,constructor
        end
    end
    utils.errorMessage( node.line, "Failed to resolve %s with no arguments",
                  utils.resolveTypeString( typedb, seekctx, typeName))
end
-- Get the type handle of a type defined as a path (elements of the
--    path are namespaces and parent structures followed by the type name resolved)
function resolveTypeFromNamePath( node, arg, argidx)
    if not argidx then argidx = #arg end
    local typeName = arg[ argidx]
    local seekContextTypes
    if argidx > 1 then
        seekContextTypes = resolveTypeFromNamePath( node, arg, argidx-1)
        expectDataType( node, seekContextTypes)
    else
        seekContextTypes = getSeekContextTypes()
    end
    local resolveContextType, reductions, items
            = typedb:resolve_type( seekContextTypes, typeName, tagmask_namespace)
    local typeId,constructor
            = selectNoArgumentType( node, seekContextTypes, typeName,
                    tagmask_namespace, resolveContextType, reductions, items)
    return {type=typeId, constructor=constructor}
end
-- Try to get the constructor and weight of a parameter passed with the
--    deduction tagmask optionally passed as an argument
function tryGetWeightedParameterReductionList(
        node, redutype, operand, tagmask_decl, tagmask_conv)
    if redutype ~= operand.type then
        local redulist,weight,altpath
            = typedb:derive_type( redutype, operand.type,
                                        tagmask_decl, tagmask_conv)
        if altpath then
            utils.errorMessage( node.line, "Ambiguous derivation for '%s': %s | %s",
                        typedb:type_string(operand.type),
                        utils.typeListString(typedb,altpath," =>"),
                        utils.typeListString(typedb,redulist," =>"))
        end
        return redulist,weight
    else
        return {},0.0
    end
end
-- Get the constructor of a type required. The deduction tagmasks are arguments
function getRequiredTypeConstructor(
        node, redutype, operand, tagmask_decl, tagmask_conv)
    if redutype ~= operand.type then
        local redulist,weight,altpath
            = typedb:derive_type( redutype, operand.type,
                                        tagmask_decl, tagmask_conv)
        if not redulist or altpath then
            io.stderr:write( "TRACE typedb:derive_type "
                    .. typedb:type_string(redutype)
                    .. " <- " .. typedb:type_string(operand.type) .. "\n"
                    .. utils.getDeriveTypeTrace( typedb, redutype, operand.type,
                                    tagmask_decl, tagmask_conv)
                    .. "\n")
        end
        if not redulist then
            utils.errorMessage( node.line, "Type mismatch, required type '%s'",
                        typedb:type_string(redutype))
        elseif altpath then
            utils.errorMessage( node.line, "Ambiguous derivation for '%s': %s | %s",
                        typedb:type_string(operand.type),
                        utils.typeListString(typedb,altpath," =>"),
                        utils.typeListString(typedb,redulist," =>"))
        end
        local rt = applyReductionList( node, redulist, operand.constructor)
        if not rt then
            utils.errorMessage( node.line, "Construction of '%s' <- '%s' failed",
                        typedb:type_string(redutype),
                        typedb:type_string(operand.type))
        end
        return rt
    else
        return operand.constructor
    end
end
-- Issue an error if the argument does not refer to a value type
function expectValueType( node, item)
    if not item.constructor then
        utils.errorMessage( node.line, "'%s' does not refer to a value",
                    typedb:type_string(item.type))
    end
end
-- Issue an error if the argument does not refer to a data type
function expectDataType( node, item)
    if item.constructor then
        utils.errorMessage( node.line, "'%s' does not refer to a data type",
                    typedb:type_string(item.type))
    end
    return item.type
end
Note

The function getSeekContextTypes() called here is important when resolving types. It provides the list of the candidate context type/constructor pairs used to resolve a type. Inside a structure, for example, it is allowed to access elements of this structure by name without a full namespace path of the element. But we can also access global types. Therefore we need to maintain a list of current context types that is extended on the entry into a structure and shrunk on exit. The list of context types is bound to a scope. This implementents the C++ using or the Pascal WITH with a one-liner. You add the argument to the list of seek-context types of the current scope.

Apply Callable

This section is the most complicated of the whole example compiler. It shows the code for how to find the best match of a callable with parameters. The candidates are fetched from a priority queue ordered by weight. Constructor functions of the top candidates are called and if they succeed to build the objects then the match is returned. Candidates with a failing constructor are dropped.

The functions tryApplyCallable and applyCallable are provided for resolving all types with arguments (operators, member access, function call, etc.).

Lua
-- For a callable item, create for each argument the lists of reductions needed to
--   pass the arguments to it, with accumulation of the reduction weights
function collectItemParameter( node, item, args, parameters)
    local rt = {redulist={},llvmtypes={},weight=0.0}
    for pi=1,#args do
        local redutype,redulist,weight
        if pi <= #parameters then
            redutype = parameters[ pi].type
            redulist,weight = tryGetWeightedParameterReductionList(
                        node, redutype, args[ pi],
                        tagmask_matchParameter, tagmask_typeConversion)
        else
            redutype = getVarargArgumentType( args[ pi].type)
            if redutype then
                redulist,weight = tryGetWeightedParameterReductionList(
                            node, redutype, args[ pi],
                            tagmask_pushVararg, tagmask_typeConversion)
            end
        end
        if not weight then return nil end
        if rt.weight < weight then -- use max(a,b) as weight accumulation function
            rt.weight = weight
        end
        table.insert( rt.redulist, redulist)
        local descr = typeDescriptionMap[ redutype]
        table.insert( rt.llvmtypes, descr.llvmtype)
    end
    return rt
end
-- Select the candidate items with the highest weight not exceeding maxweight
function selectCandidateItemsBestWeight( items, item_parameter_map, maxweight)
    local candidates,bestweight = {},nil
    for ii,item in ipairs(items) do
        if item_parameter_map[ ii] then -- we have a match
            local weight = item_parameter_map[ ii].weight
            if not maxweight or maxweight > weight + weightEpsilon then
                -- we have a candidate not looked at yet
                if not bestweight then
                    candidates = {ii}
                    bestweight = weight
                elseif weight < bestweight + weightEpsilon then
                    if weight >= bestweight - weightEpsilon then
                        -- they are equal
                        table.insert( candidates, ii)
                    else
                        -- the new candidate is the single best match
                        candidates = {ii}
                        bestweight = weight
                    end
                end
            end
        end
    end
    return candidates,bestweight
end
-- Get the best matching item from a list of items by weighting the matching of
--   the arguments to the item parameter types
function selectItemsMatchParameters( node, items, args, this_constructor)
    local item_parameter_map = {}
    local bestmatch = {}
    local candidates = {}
    local bestweight = nil
    local bestgroup = 0
    for ii,item in ipairs(items) do
        local nof_params = typedb:type_nof_parameters( item)
        if nof_params == #args then
            local param = typedb:type_parameters( item)
            item_parameter_map[ ii] = collectItemParameter( node,item,args,param)
        end
    end
    while next(item_parameter_map) ~= nil do -- until no candidate groups left
        candidates,bestweight
            = selectCandidateItemsBestWeight( items,item_parameter_map,bestweight)
        for _,ii in ipairs(candidates) do
            local item_constructor = typedb:type_constructor( items[ ii])
            local call_constructor
            if not item_constructor and #args == 0 then
                call_constructor = this_constructor
            else
                local ac,success = nil,true
                local arg_constructors = {}
                for ai=1,#args do
                    ac,success = tryApplyReductionList( node,
                            item_parameter_map[ ii].redulist[ ai],
                            args[ ai].constructor)
                    if not success then break end
                    table.insert( arg_constructors, ac)
                end
                if success then
                    call_constructor
                        = item_constructor( this_constructor, arg_constructors,
                                        item_parameter_map[ ii].llvmtypes)
                end
            end
            if call_constructor then
                local match = {type=items[ ii], constructor=call_constructor}
                table.insert( bestmatch, match)
            end
            item_parameter_map[ ii] = nil
        end
        if #bestmatch ~= 0 then return bestmatch,bestweight end
    end
end
-- Find a callable identified by name and its arguments (parameter matching)
--   in the context of a type (this)
function findCallable( node, this, callable, args)
    local resolveContextType,reductions,items
        = typedb:resolve_type( this.type, callable, tagmask_resolveType)
    if not resolveContextType then return nil end
    if type(resolveContextType) == "table" then
        io.stderr:write( "TRACE typedb:resolve_type\n"
                .. utils.getResolveTypeTrace( typedb, this.type, callable,
                        tagmask_resolveType) .. "\n")
        utils.errorResolveType( typedb, node.line,
                    resolveContextType, this.type, callable)
    end
    local this_constructor
        = applyReductionList( node, reductions, this.constructor)
    local bestmatch,bestweight
        = selectItemsMatchParameters( node, items, args or {}, this_constructor)
    return bestmatch,bestweight
end
-- Filter best result and report error on ambiguity
function getCallableBestMatch( node, bestmatch, bestweight, this, callable, args)
    if #bestmatch == 1 then
        return bestmatch[1]
    elseif #bestmatch == 0 then
        return nil
    else
        local altmatchstr = ""
        for ii,bm in ipairs(bestmatch) do
            if altmatchstr ~= "" then
                altmatchstr = altmatchstr .. ", "
            end
            altmatchstr = altmatchstr .. typedb:type_string(bm.type)
        end
        utils.errorMessage( node.line,
                    "Ambiguous matches resolving callable '%s', candidates: %s",
                    typeDeclarationString( this, callable, args), altmatchstr)
    end
end
-- Retrieve and apply a callable in a specified context
function applyCallable( node, this, callable, args)
    local bestmatch,bestweight = findCallable( node, this, callable, args)
    if not bestweight then
        io.stderr:write( "TRACE typedb:resolve_type\n"
                .. utils.getResolveTypeTrace( typedb, this.type, callable,
                        tagmask_resolveType) .. "\n")
        utils.errorMessage( node.line, "Failed to find callable '%s'",
                    typeDeclarationString( this, callable, args))
    end
    local rt = getCallableBestMatch( node, bestmatch, bestweight,
                        this, callable, args)
    if not rt then
        utils.errorMessage( node.line, "Failed to match params to callable '%s'",
                    typeDeclarationString( this, callable, args))
    end
    return rt
end
-- Try to retrieve a callable in a specified context, apply it and return its
--   type/constructor pair, return nil if not found
function tryApplyCallable( node, this, callable, args)
    local bestmatch,bestweight = findCallable( node, this, callable, args)
    if bestweight then
        return getCallableBestMatch( node, bestmatch, bestweight)
    end
end

Constructor Functions

Here are the building blocks for defining constructors.

  • The functions constructorParts, constructorStruct and typeConstructorPairStruct are helpers for constructor or type/constructor pair structures.
  • The function callConstructor builds a constructor function from a format string and additional attributes. Most of the constructor functions of this example compiler are defined with callConstructor. It uses the helper function buildCallArguments to build some format string variables for mapping the arguments of a constructor call.
Lua
-- Get the two parts of a constructor as tuple
function constructorParts( constructor)
    if type(constructor) == "table" then
        return constructor.out,(constructor.code or "")
    else
        return tostring(constructor),""
    end
end
-- Get a constructor structure
function constructorStruct( out, code)
    return {out=out, code=code or ""}
end
-- Create a type/constructor pair as used by most functions constructing a type
function typeConstructorPairStruct( type, out, code)
    return {type=type, constructor=constructorStruct( out, code)}
end
-- Builds the argument string and the argument build-up code for a function call
--   or interface method call constructors
function buildCallArguments( subst, thisTypeId, thisConstructor, args, types)
    local this_inp,code = constructorParts(thisConstructor or "%UNDEFINED")
    local callargstr = ""
    if types and thisTypeId and thisTypeId ~= 0 then
        callargstr = typeDescriptionMap[ thisTypeId].llvmtype
                    .. " " .. this_inp .. ", "
    end
    if args then
        for ii=1,#args do
            local arg = args[ ii]
            local arg_inp,arg_code = constructorParts( arg)
            subst[ "arg" .. ii] = arg_inp
            if types then
                local llvmtype = types[ ii].llvmtype
                if not llvmtype then
                    utils.errorMessage( 0, "Parameter has no LLVM type specified")
                end
                callargstr = callargstr .. llvmtype
                        .. " " .. tostring(arg_inp) .. ", "
            end
            code = code .. arg_code
        end
    end
    if types or thisTypeId ~= 0 then callargstr = callargstr:sub(1, -3) end
    subst.callargstr = callargstr
    subst.this = this_inp
    return code
end
-- Constructor of a call with an self argument and some additional arguments
function callConstructor( fmt, thisTypeId, argTypeIds, vartable)
    return function( this_constructor, arg_constructors)
        env = getCallableEnvironment()
        local out = env.register()
        local subst = utils.deepCopyStruct( vartable) or {}
        subst.out = out
        local code = buildCallArguments(
                    subst, thisTypeId or 0,
                    this_constructor, arg_constructors, argTypeIds)
        code = code .. utils.constructor_format( fmt, subst, env.register)
        return {code=code,out=out}
    end
end

Define Function Call

The function defineFunctionCall introduced in this section is used to define a free function call or a method call as "()" operator with arguments on a callable. A callable is an intermediate type created to unify all cases of a function call into one case. For example, function variables may also be called with the arguments in oval brackets "(" ")". If we want to unify these cases, we cannot define a function as a symbol with arguments, because the symbol binding is not available for a function variable. Therefore we define the function symbol to be of type callable with a "()" operator with the function parameter as arguments. The function variable can reference the callable as its type and also have a "()" operator with the function parameter as arguments.

Lua
-- Get the parameter string of a function declaration
function getDeclarationLlvmTypeRegParameterString( descr, context)
    local rt = ""
    if context.domain == "member" then
        rt = rt .. typeDescriptionMap[ context.decltype].llvmtype .. "* %ths, "
    end
    for ai,arg in ipairs(descr.param or {}) do
        rt = rt .. arg.llvmtype .. " " .. arg.reg .. ", "
    end
    if rt ~= "" then rt = rt:sub(1, -3) end
    return rt
end

-- Get the parameter string of a function declaration
function getDeclarationLlvmTypedefParameterString( descr, context)
    local rt = ""
    if context.domain == "member" then
        rt = rt .. (descr.llvmthis or context.descr.llvmtype) .. "*, "
    end
    for ai,arg in ipairs(descr.param) do
        rt = rt .. arg.llvmtype .. ", "
    end
    if rt ~= "" then rt = rt:sub(1, -3) end
    return rt
end

-- Get (if already defined) or create the callable context type (function name)
--   on which the "()" operator implements the function call
function getOrCreateCallableContextTypeId( contextTypeId, name, descr)
    local rt = typedb:get_type( contextTypeId, name)
    if not rt then
        rt = typedb:def_type( contextTypeId, name)
        typeDescriptionMap[ rt] = descr
    end
    return rt
end

-- Define a direct function call: class method call, free function call
function defineFunctionCall( node, descr, context)
    descr.argstr = getDeclarationLlvmTypedefParameterString( descr, context)
    descr.llvmtype = utils.template_format( llvmir.control.functionCallType, descr)
    local contextType = getDeclarationContextTypeId(context)
    local thisType = (contextType ~= 0) and referenceTypeMap[ contextType] or 0
    local callablectx = getOrCreateCallableContextTypeId(
                 thisType, descr.name, llvmir.callableDescr)
    local fmt = descr.ret
            and llvmir.control.functionCall
            or llvmir.control.procedureCall
    local constructor = callConstructor( fmt, thisType, descr.param, descr)
    return defineCall( descr.ret, callablectx, "()", descr.param, constructor)
end

Const Expression Types

Constants in the source trigger the creation of const expression types. Const expression types have their proprietary implementation of operators. The const expression operator constructors do not produce code but return a value as result. The constructor of a const expression is the value of the data item with this type.

Lua
-- Constant expression scalar types and string type represented as Lua values
constexprIntegerType = typedb:def_type( 0, "constexpr int")
constexprDoubleType = typedb:def_type( 0, "constexpr double")
constexprBooleanType = typedb:def_type( 0, "constexpr bool")
constexprStringType = typedb:def_type( 0, "constexpr string")

-- structure initializer list type for structure declarations in the source
constexprStructureType = typedb:def_type( 0, "constexpr struct")

-- Void type handled as no type:
voidType = typedb:def_type( 0, "void")
-- String constant, this example language knows strings only as constants:
stringType = defineDataType( {line=0}, 0, "string", llvmir.string)

scalarTypeMap.void = voidType
scalarTypeMap.string = stringType

typeDescriptionMap[ constexprIntegerType] = llvmir.constexprIntegerDescr
typeDescriptionMap[ constexprDoubleType] = llvmir.constexprDoubleDescr
typeDescriptionMap[ constexprBooleanType] = llvmir.constexprBooleanDescr
typeDescriptionMap[ constexprStructureType] = llvmir.constexprStructDescr

function isScalarConstExprValueType( initType)
    return initType >= constexprIntegerType and initType <= stringType
end

scalarTypeMap["constexpr int"] = constexprIntegerType
scalarTypeMap["constexpr double"] = constexprDoubleType
scalarTypeMap["constexpr bool"] = constexprBooleanType
scalarTypeMap["constexpr struct"] = constexprStructureType
scalarTypeMap["constexpr string"] = constexprStringType

-- Create a constexpr node from a lexem in the AST
function createConstexprValue( typeId, value)
    if typeId == constexprBooleanType then
        if value == "true" then return true else return false end
    elseif typeId == constexprIntegerType or typeId == constexprDoubleType then
        return tonumber(value)
    elseif typeId == constexprStringType then
        if not stringConstantMap[ value] then
            local encval,enclen = utils.encodeLexemLlvm(value)
            local name = utils.uniqueName( "string")
            stringConstantMap[ value] = {size=enclen+1,name=name}
            local subst = {name=name, size=enclen+1, value=encval}
            local fmt = llvmir.control.stringConstDeclaration
            print_section( "Constants",
                utils.constructor_format( fmt, subst) .. "\n")
        end
        return stringConstantMap[ value]
    end
end
-- List of value constructors from constexpr constructors
function constexprDoubleToDoubleConstructor( val)
    return constructorStruct( "0x" .. mewa.llvm_double_tohex( val))
end
function constexprDoubleToIntegerConstructor( val)
    return constructorStruct( tostring(tointeger(val)))
end
function constexprDoubleToBooleanConstructor( val)
    return constructorStruct( math.abs(val) < epsilon and "0" or "1")
end
function constexprIntegerToDoubleConstructor( val)
    return constructorStruct( "0x" .. mewa.llvm_double_tohex( val))
end
function constexprIntegerToIntegerConstructor( val)
    return constructorStruct( tostring(val))
end
function constexprIntegerToBooleanConstructor( val)
    return constructorStruct( val == "0" and "0" or "1")
end
function constexprBooleanToScalarConstructor( val)
    return constructorStruct( val == true and "1" or "0")
end

function defineBinopConstexpr( typ, opr, constructor)
    defineCall( typ, typ, opr, {typ}, constructor)
end
function defineBinopConstexprPromote( typ, promotetyp, opr, promote)
    definePromoteCall( promotetyp, typ, promotetyp, opr, {promotetyp}, promote)
end
-- Define arithmetics of constant expressions
function defineConstExprArithmetics()
    defineCall( constexprIntegerType, constexprIntegerType, "-", {},
                function(this) return -this end)
    defineCall( constexprDoubleType, constexprDoubleType, "-", {},
                function(this) return -this end)
    do
        local typ = constexprIntegerType
        defineBinopConstexpr( typ, "+", function(t,a) return t+a[1] end)
        defineBinopConstexpr( typ, "-", function(t,a) return t-a[1] end)
        defineBinopConstexpr( typ, "*", function(t,a) return tointeger(t*a[1]) end)
        defineBinopConstexpr( typ, "/", function(t,a) return tointeger(t/a[1]) end)
    end
    do
        local typ = constexprDoubleType
        defineBinopConstexpr( typ, "+", function(t,a) return t+a[1] end)
        defineBinopConstexpr( typ, "-", function(t,a) return t-a[1] end)
        defineBinopConstexpr( typ, "*", function(t,a) return t*a[1] end)
        defineBinopConstexpr( typ, "/", function(t,a) return t/a[1] end)
    end
    -- Define arithmetic operators of integers with a double as promotion of the
    --   left-hand integer to a double and an operator of a double with a double:
    for _,opr in ipairs({"+","-","*","/"}) do
        defineBinopConstexprPromote( constexprIntegerType, constexprDoubleType, opr,
                    function(this) return this end)
    end
end
-- Define the type conversions of const expressions to other const expression types
function defineConstExprTypeConversions()
    typedb:def_reduction( constexprBooleanType, constexprIntegerType,
            function( value) return math.abs(value) > epsilon end,
            tag_typeConversion, rdw_constexpr_bool)
    typedb:def_reduction( constexprBooleanType, constexprDoubleType,
            function( value) return math.abs(value) > epsilon end,
            tag_typeConversion, rdw_constexpr_bool)
    typedb:def_reduction( constexprDoubleType, constexprIntegerType,
            function( value) return value end,
            tag_typeConversion, rdw_constexpr_float)
    typedb:def_reduction( constexprIntegerType, constexprDoubleType,
            function( value) return math.floor(value) end,
            tag_typeConversion, rdw_constexpr_float)
    typedb:def_reduction( constexprIntegerType, constexprBooleanType,
            function( value) return value and 1 or 0 end,
            tag_typeConversion, rdw_constexpr_bool)
end
Remark

The functions mewa.llvmdoubletohex or mewa.llvmfloattohex are functions provided by the Mewa library to convert floating-point number constants into a binary representation needed by LLVM IR for floating-point numbers that have no exact binary representation of a value written with decimals, e.g. 0.1. This is not an ideal situation. The Mewa library should not have any API bindings to LLVM.

First Class Scalar Types

This section implements the creation of the first class scalar types from their descriptions in the module llvmir_scalar.lua. The string type is also defined here. As for the const expression types, we also define promote calls here, like integer + double implemented as double + double after promoting the left argument.

Lua
-- Define built-in promote calls for first class citizen scalar types
function defineBuiltInTypePromoteCalls( typnam, descr)
    local typeId = scalarTypeMap[ typnam]
    for i,promote_typnam in ipairs( descr.promote) do
        local promote_typeId = scalarTypeMap[ promote_typnam]
        local promote_descr = typeDescriptionMap[ promote_typeId]
        local promote_conv_fmt = promote_descr.conv[ typnam].fmt
        local promote_conv = promote_conv_fmt and callConstructor( promote_conv_fmt)
        if promote_descr.binop then
            for operator,operator_fmt in pairs( promote_descr.binop) do
                definePromoteCall(
                    promote_typeId, typeId, promote_typeId,
                    operator, {promote_typeId}, promote_conv)
            end
        end
        if promote_descr.cmpop then
            for operator,operator_fmt in pairs( promote_descr.cmpop) do
                definePromoteCall(
                    scalarBooleanType, typeId, promote_typeId,
                    operator, {promote_typeId}, promote_conv)
            end
        end
    end
end
-- Define the promote calls of a const expression for a binary scalar operator
function defineBinopConstexprPromoteCalls( resultType, operator, argtype, descr)
    if descr.llvmtype == "double" then
        definePromoteCall( resultType, constexprDoubleType, argtype,
                    operator, {argtype}, constexprDoubleToDoubleConstructor)
        definePromoteCall( resultType, constexprIntegerType, argtype,
                    operator, {argtype}, constexprIntegerToDoubleConstructor)
        definePromoteCall( resultType, constexprBooleanType, argtype,
                    operator, {argtype}, constexprBooleanToScalarConstructor)
    elseif descr.class == "bool" then
        definePromoteCall( resultType, constexprBooleanType, argtype,
                    operator, {argtype}, constexprBooleanToScalarConstructor)
    elseif descr.class == "signed" then
        definePromoteCall( resultType, constexprIntegerType, argtype,
                    operator, {argtype}, constexprIntegerToIntegerConstructor)
        definePromoteCall( resultType, constexprBooleanType, argtype,
                    operator, {argtype}, constexprBooleanToScalarConstructor)
    end
end

-- Helper functions to define binary operators of first class scalar types
function defineBuiltInBinaryOperators( typnam, descr, operators, resultTypeId)
    for opr,fmt in pairs(operators) do
        local typeId = scalarTypeMap[ typnam]
        local descr = typeDescriptionMap[ typeId]
        defineCall( resultTypeId, typeId, opr, {typeId}, callConstructor( fmt))
        defineBinopConstexprPromoteCalls( resultTypeId, opr, typeId, descr)
    end
end
-- Helper functions to define binary operators of first class scalar types
function defineBuiltInUnaryOperators( typnam, descr, operators, resultTypeId)
    for opr,fmt in ipairs(operators) do
        local typeId = scalarTypeMap[ typnam]
        local descr = typeDescriptionMap[ typeId]
        defineCall( resultTypeId, typeId, opr, {}, callConstructor( fmt))
        defineBinopConstexprPromoteCalls( resultTypeId, opr, typeId, descr)
    end
end
-- Constructor of a string pointer from a string definition
function stringPointerConstructor( stringdef)
    local env = getCallableEnvironment()
    local out = env.register()
    local subst = {size=stringdef.size,name=stringdef.name,out=out}
    local fmt = llvmir.control.stringConstConstructor
    local code = utils.template_format( fmt, subst)
    return constructorStruct( out, code)
end
-- Initialize all built-in types
function initBuiltInTypes()
    -- Define the first class scalar types
    for typnam, descr in pairs( llvmir.scalar) do
        local typeId = defineDataType( {line=0}, 0, typnam, descr)
        if typnam == "int" then
            scalarIntegerType = typeId
            typedb:def_reduction( typeId, constexprIntegerType,
                        constexprIntegerToIntegerConstructor, tag_typeInstantiation)
        elseif typnam == "double" then
            scalarDoubleType = typeId
            typedb:def_reduction( typeId, constexprDoubleType,
                        constexprDoubleToDoubleConstructor, tag_typeInstantiation)
        elseif typnam == "bool" then
            scalarBooleanType = typeId
            typedb:def_reduction( typeId, constexprBooleanType,
                        constexprBooleanToScalarConstructor, tag_typeInstantiation)
        end
        scalarTypeMap[ typnam] = typeId
    end
    -- Define the conversions between built-in types
    for typnam, descr in pairs( llvmir.scalar) do
        local typeId = scalarTypeMap[ typnam]
        for typnam_conv,conv in pairs(descr.conv) do
            local typeId_conv = scalarTypeMap[ typnam_conv]
            typedb:def_reduction( typeId, typeId_conv, callConstructor( conv.fmt),
                         tag_typeConversion, conv.weight)
        end
    end
    -- Define operators
    for typnam, descr in pairs( llvmir.scalar) do
        local typeId = scalarTypeMap[ typnam]
        defineBuiltInBinaryOperators( typnam, descr, descr.binop, typeId)
        defineBuiltInBinaryOperators( typnam, descr, descr.cmpop, scalarBooleanType)
        defineBuiltInUnaryOperators( typnam, descr, descr.unop, typeId)
        defineCall( voidType, referenceTypeMap[ typeId], "=", {typeId},
                callConstructor( descr.assign))
        defineCall( voidType, referenceTypeMap[ typeId], "=", {},
                    callConstructor( descr.assign, 0, nil,
                    {arg1=descr.default}))
    end
    -- Define operators with promoting of the left side argument
    for typnam, descr in pairs( llvmir.scalar) do
        defineBuiltInTypePromoteCalls( typnam, descr)
    end
    -- String type
    local string_descr = typeDescriptionMap[ stringType]
    local string_refType = referenceTypeMap[ stringType]
    typedb:def_reduction( stringType, string_refType,
                    callConstructor( string_descr.load), tag_typeInstantiation)
    typedb:def_reduction( stringType, constexprStringType,
                    stringPointerConstructor, tag_typeInstantiation)
    defineCall( voidType, string_refType, "=", {stringType},
                    callConstructor( string_descr.assign))
    defineCall( voidType, string_refType, "=", {},
                    callConstructor( string_descr.assign, 0, nil,
                    {arg1=string_descr.default}))
end

Variables

Here are the functions to declare variables of any kind depending on the context: local variables, global variables, member variables, function parameter, etc. Most of the code is self-explaining now.

One new thing is the use of the global variable localDefinitionContext as context type when defining local variables. We could as well use 0 instead of the variable. In a language implementing generics the value of localDefinitionContext can vary because generic instances share scopes. Instances of generics have to define an artificial type for the local definition context to separate their local definitions from others.

Lua
-- Define a member variable of a class or a structure
function defineMemberVariable(
            node, descr, context, typeId, refTypeId, name)
    local memberpos = context.structsize or 0
    local index = #context.members
    local subst = {index=index, type=descr.llvmtype}
    local load_ref = utils.template_format( context.descr.loadelemref, subst)
    local load_val = utils.template_format( context.descr.loadelem, subst)

    while math.fmod( memberpos, descr.align) ~= 0 do
        memberpos = memberpos + 1
    end
    context.structsize = memberpos + descr.size
    local member = { type=typeId, name=name, descr=descr, bytepos=memberpos }
    table.insert( context.members, member)
    if not context.llvmtype then
        context.llvmtype = descr.llvmtype
    else
        context.llvmtype = context.llvmtype  .. ", " .. descr.llvmtype
    end
    defineCall( refTypeId, referenceTypeMap[ context.decltype], name, {},
            callConstructor( load_ref))
    defineCall( typeId, context.decltype, name, {},
            callConstructor( load_val))
end
-- Define a free global variable
function defineGlobalVariable(
            node, descr, context, typeId, refTypeId, name, initVal)
    local out = "@" .. name
    local var = typedb:def_type( 0, name, out)
    if var == -1 then
        utils.errorMessage( node.line, "Duplicate definition of '%s'", name)
    end
    typedb:def_reduction( refTypeId, var, nil, tag_typeDeclaration)
    if initVal
    and descr.scalar == true
    and isScalarConstExprValueType( initVal.type) then
        local initScalarConst
            = constructorParts(
                getRequiredTypeConstructor(
                    node, typeId, initVal,
                    tagmask_matchParameter, tagmask_typeConversion))
        local subst = {out = out, val = initScalarConst}
        print( utils.constructor_format( descr.def_global_val, subst))
    else
        utils.errorMessage( node.line, "Only const scalars as init of globals")
    end
end
-- Define a free local variable
function defineLocalVariable(
            node, descr, context, typeId, refTypeId, name, initVal)
    local env = getCallableEnvironment()
    local out = env.register()
    local code = utils.constructor_format( descr.def_local, {out=out}, env.register)
    local var = typedb:def_type( localDefinitionContext,name,constructorStruct(out))
    if var == -1 then
        utils.errorMessage( node.line, "Duplicate definition of '%s'", name)
    end
    typedb:def_reduction( refTypeId, var, nil, tag_typeDeclaration)
    local decl = {type=var, constructor={code=code,out=out}}
    if type(initVal) == "function" then initVal = initVal() end
    return applyCallable( node, decl, "=", {initVal})
end
-- Define a variable (what kind is depending on the context)
function defineVariable( node, context, typeId, name, initVal)
    local descr = typeDescriptionMap[ typeId]
    local refTypeId = referenceTypeMap[ typeId]
    if not refTypeId then
        utils.errorMessage( node.line, "Reference in variable declarations,: %s",
                           typedb:type_string(typeId))
    end
    if context.domain == "local" then
        return defineLocalVariable( node, descr, context,
                        typeId, refTypeId, name, initVal)
    elseif context.domain == "global" then
        return defineGlobalVariable( node, descr, context,
                        typeId, refTypeId, name, initVal)
    elseif context.domain == "member" then
        if initVal then
            utils.errorMessage( node.line, "No init value for member allowed")
        end
        defineMemberVariable( node, descr, context, typeId, refTypeId, name)
    else
        utils.errorMessage( node.line, "Context domain undefined (%s)",
                            mewa.tostring(context))
    end
end
-- Declare a variable implicitly that does not appear as definition in source
function defineImplicitVariable( node, typeId, name, reg)
    local var = typedb:def_type( localDefinitionContext, name, reg)
    if var == -1 then
        local declstr = typeDeclarationString( typeId, name)
        utils.errorMessage( node.line, "Duplicate type '%s'", declstr)
    end
    typedb:def_reduction( typeId, var, nil, tag_typeDeclaration)
    return var
end
-- Make a function parameter addressable by name in the callable body
function defineParameter( node, typeId, name)
    local env = getCallableEnvironment()
    local paramreg = env.register()
    local var = typedb:def_type( localDefinitionContext, name, paramreg)
    if var == -1 then
        utils.errorMessage( node.line, "Duplicate definition of parameter '%s'",
                typeDeclarationString( localDefinitionContext, name))
    end
    local descr = typeDescriptionMap[ typeId]
    local ptype = (descr.scalar or descr.class == "pointer")
                and typeId
                or referenceTypeMap[ typeId]
    if not ptype then
        utils.errorMessage( node.line, "Cannot use type '%s' as parameter type",
                    typedb:type_string(typeId))
    end
    typedb:def_reduction( ptype, var, nil, tag_typeDeclaration)
    return {type=ptype, llvmtype=typeDescriptionMap[ ptype].llvmtype, reg=paramreg}
end
-- Resolve a variable by name and return its type/constructor structure
function getVariable( node, varname)
    local env = getCallableEnvironment()
    local seekctx = getSeekContextTypes()
    local resolveContextTypeId, reductions, items
            = typedb:resolve_type( seekctx, varname, tagmask_resolveType)
    local typeId,constructor = selectNoArgumentType( node, seekctx, varname,
                    tagmask_resolveType, resolveContextTypeId, reductions, items)
    local variableScope = typedb:type_scope( typeId)
    if variableScope[1] == 0 or env.scope[1] <= variableScope[1] then
        -- the local variable is not belonging to another function
        return {type=typeId, constructor=constructor}
    else
        utils.errorMessage( node.line, "Not allowed to access variable '%s' not "
                        .. "defined in current function or global scope",
                        typedb:type_string(typeId))
    end
end

Define Data Types

This section provides the functions to declare the data types of the example language, including structures and arrays. The data types of the example language are fairly simple because of the missing need for cleanup in case of failure.

The elementwise initializer of the class type and the array type is using the function applyCallable for the member initialization. This provides recursion for the assignments of substructures.

The getOrCreateArrayType function is a seldom case where the current scope is set manually. The scope of the array type definition is set to the scope of the element type. The current scope is set back to the original after the function completed its job.

Lua
-- Define a data type with all its qualifiers
function defineDataType( node, contextTypeId, typnam, descr)
    local typeId = typedb:def_type( contextTypeId, typnam)
    local refTypeId = typedb:def_type( contextTypeId, typnam .. "&")
    if typeId <= 0 or refTypeId <= 0 then
        utils.errorMessage( node.line, "Duplicate definition of '%s'", typnam)
    end
    referenceTypeMap[ typeId] = refTypeId
    dereferenceTypeMap[ refTypeId] = typeId
    typeDescriptionMap[ typeId] = descr
    typeDescriptionMap[ refTypeId] = llvmir.pointerDescr(descr)
    typedb:def_reduction( typeId, refTypeId, callConstructor( descr.load),
                    tag_typeDeduction, rdw_load)
    return typeId
end
-- Structure type definition for a class
function defineStructureType( node, declContextTypeId, typnam, fmt)
    local descr = utils.template_format( fmt, {symbol=typnam})
    local typeId = defineDataType( node, declContextTypeId, typnam, descr)
    return typeId,descr
end
-- Define the assignment operator of a class as memberwise assignment
function defineClassStructureAssignmentOperator( node, typeId)
    local descr = typeDescriptionMap[ typeId]
    local function assignElementsConstructor( this, args)
        local env = getCallableEnvironment()
        if args and #args ~= 0 and #args ~= #descr.members then
            utils.errorMessage( node.line, "Nof elements %d != members %d in '%s'",
                        #args, #descr.members, typedb:type_string( typeId))
        end
        local this_inp,code = constructorParts( this)
        for mi,member in ipairs(descr.members) do
            local out = env.register()
            local loadref = descr.loadelemref
            local llvmtype = member.descr.llvmtype
            local member_reftype = referenceTypeMap[ member.type]
            local ths = {type=member_reftype,constructor=constructorStruct(out)}
            local member_element
                       = applyCallable( node, ths, "=", {args and args[mi]})
            local subst = {out=out,this=this_inp,index=mi-1, type=llvmtype}
            code = code
                .. utils.constructor_format(loadref,subst)
                .. member_element.constructor.code
        end
        return {code=code}
    end
    local function assignStructTypeConstructor( this, args)
        return assignElementsConstructor( this, args[1].list)
    end
    defineCall( nil, referenceTypeMap[ typeId], "=", {constexprStructureType},
                assignStructTypeConstructor)
    defineCall( nil, referenceTypeMap[ typeId], "=", {},
                assignElementsConstructor)
end
-- Define the index access operator for arrays
function defineArrayIndexOperator( elemTypeId, arTypeId, arDescr)
    defineCall( referenceTypeMap[elemTypeId], referenceTypeMap[arTypeId], "[]",
                {scalarIntegerType}, callConstructor( arDescr.index[ "int"]))
end
-- Constructor for a memberwise assignment of an array from an initializer-list
function memberwiseInitArrayConstructor(
            node, thisType, elementType, nofElements)
    return function( this, args)
        if #args > nofElements then
            utils.errorMessage( node.line, "Nof elements %d > %d for init '%s'",
                        #args, nofElements, typedb:type_string( thisType))
        end
        local descr = typeDescriptionMap[ thisType]
        local descr_element = typeDescriptionMap[ elementType]
        local elementRefTypeId = referenceTypeMap[ elementType] or elementType
        local env = getCallableEnvironment()
        local this_inp,code = constructorParts( this)
        for ai=1,nofElements do
            local arg = (ai <= nofElements) and args[ai] or nil
            local elemreg = env.register()
            local elem = typeConstructorPairStruct( elementRefTypeId, elemreg)
            local init = tryApplyCallable( node, elem, "=", {arg})
            if not init then
                utils.errorMessage( node.line, "Failed to find ctor '%s'",
                            typeDeclarationString( elem, "=", {arg}))
            end
            local subst = {index=ai-1,this=this_inp,out=elemreg}
            local fmt = descr.memberwise_index
            local memberwise_next
                    = utils.constructor_format( fmt, subst, env.register)
            code = code .. memberwise_next .. init.constructor.code
        end
        return {out=this_inp, code=code}
    end
end
-- Constructor for an assignment of a structure (initializer list) to an array
function arrayStructureAssignmentConstructor(
        node, thisType, elementType, nofElements)
    local initfunction
        = memberwiseInitArrayConstructor( node, thisType, elementType, nofElements)
    return function( this, args)
        return initfunction( this, args[1].list)
    end
end
-- Implicit on demand type definition for array
function getOrCreateArrayType( node, elementType, arraySize)
    local arrayKey = string.format( "%d[%d]", elementType, arraySize)
    if not arrayTypeMap[ arrayKey] then
        local scope_bk,step_bk = typedb:scope( typedb:type_scope( elementType))
        local typnam = string.format( "[%d]", arraySize)
        local elementDescr = typeDescriptionMap[ elementType]
        local arrayDescr = llvmir.arrayDescr( elementDescr, arraySize)
        local arrayType = defineDataType( node, elementType, typnam, arrayDescr)
        local arrayRefType = referenceTypeMap[ arrayType]
        arrayTypeMap[ arrayKey] = arrayType
        defineArrayIndexOperator( elementType, arrayType, arrayDescr)
        local constructor = arrayStructureAssignmentConstructor(
                        node, arrayType, elementType, arraySize)
        defineCall( voidType, arrayRefType, "=",
                        {constexprStructureType}, constructor)
        typedb:scope( scope_bk,step_bk)
    end
    return arrayTypeMap[ arrayKey]
end

Context Types

The list of context types used for resolving types has already been explained. The function getDeclarationContextTypeId provides the access to the context type used for declarations depending on context. The function getSeekContextTypes provides the access to the list context type used for typedb:resolve_type.

The list of seek-context types is also dependent on a scope. When adding an element to a list not yet bound to the current scope then the list of the enclosing scope cloned calling thisInstanceTableClone( name, emptyInst) and the element is added to the clone. This comes into play when the self type is added to the list of context types. It is only visible in the body of the method.

Lua
-- Get the context type for type declarations
function getDeclarationContextTypeId( context)
    if context.domain == "local" then return localDefinitionContext
    elseif context.domain == "member" then return context.decltype
    elseif context.domain == "global" then return 0
    end
end
-- Get an object instance and clone it if it is not stored in the current scope,
--   making it possible to add elements to an inherited instance
function thisInstanceTableClone( name, emptyInst)
    local inst = typedb:this_instance( name)
    if not inst then
        inst = utils.deepCopyStruct( typedb:get_instance( name) or emptyInst)
        typedb:set_instance( name, inst)
    end
    return inst
end
-- Get the list of seek context types associated with the current scope
function getSeekContextTypes()
    return typedb:get_instance( seekContextKey) or {0}
end
-- Push an element to the current seek context type list
function pushSeekContextType( val)
    table.insert( thisInstanceTableClone( seekContextKey, {0}), val)
end
-- Remove the last element of the the list of seek context types
function popSeekContextType( val)
    local seekctx = typedb:this_instance( seekContextKey)
    if not seekctx or seekctx[ #seekctx] ~= val then
        utils.errorMessage( 0, "Corrupt definition context stack")
    end
    table.remove( seekctx, #seekctx)
end

Callable Environment

The callable environment bound to the scope of the function body has also been discussed.

To mention is the function expandMethodEnvironment that declares the self variable in a method body (explicit and implicit).

Lua
-- Create a callable environent object
function createCallableEnvironment( node, name, rtype, rprefix, lprefix)
    if rtype then
        local descr = typeDescriptionMap[ rtype]
        if not descr.scalar and not descr.class == "pointer" then
            utils.errorMessage( node.line, "Only scalar types can be returned")
        end
    end
    return {
        name=name, line=node.line, scope=typedb:scope(),
        register=utils.register_allocator(rprefix),
        label=utils.label_allocator(lprefix), returntype=rtype
    }
end
-- Attach a newly created data structure for a callable to its scope
function defineCallableEnvironment( node, name, rtype)
    local env = createCallableEnvironment( node, name, rtype)
    if typedb:this_instance( callableEnvKey) then
        utils.errorMessage( node.line, "Callable env defined twice: %s %s",
                    name, mewa.tostring({(typedb:scope())}))
    end
    typedb:set_instance( callableEnvKey, env)
    return env
end
-- Get the active callable instance
function getCallableEnvironment()
    return typedb:get_instance( callableEnvKey)
end
-- Set some variables needed in a class method implementation body
function expandMethodEnvironment( node, context, descr, env)
    local selfTypeId = referenceTypeMap[ context.decltype]
    local classvar = defineImplicitVariable( node, selfTypeId, "self", "%ths")
    pushSeekContextType( {type=classvar, constructor={out="%ths"}})
end

Control Boolean Types

Here we have a complete definition of the control boolean types as introduced in the tutorial. The function definition has been taken one to one from the example language1. I think after our journey through the example, the code explains itself.

Lua
-- Initialize control boolean types used for implementing control structures
function initControlBooleanTypes()
    controlTrueType = typedb:def_type( 0, " controlTrueType")
    controlFalseType = typedb:def_type( 0, " controlFalseType")

    local function controlTrueTypeToBoolean( constructor)
        local env = getCallableEnvironment()
        local out = env.register()
        local subst = {falseExit=constructor.out,out=out}
        local fmt = llvmir.control.controlTrueTypeToBoolean
        return {code = constructor.code
                .. utils.constructor_format(fmt,subst,env.label),out=out}
    end
    local function controlFalseTypeToBoolean( constructor)
        local env = getCallableEnvironment()
        local out = env.register()
        local subst = {trueExit=constructor.out,out=out}
        local fmt = llvmir.control.controlFalseTypeToBoolean
        return {code = constructor.code
                .. utils.constructor_format( fmt,subst,env.label),out=out}
    end
    typedb:def_reduction( scalarBooleanType, controlTrueType,
                    controlTrueTypeToBoolean, tag_typeDeduction, rwd_control)
    typedb:def_reduction( scalarBooleanType, controlFalseType,
                    controlFalseTypeToBoolean, tag_typeDeduction, rwd_control)

    local function booleanToControlTrueType( constructor)
        local env = getCallableEnvironment()
        local out = env.label()
        local subst = {inp=constructor.out, out=out}
        local fmt = llvmir.control.booleanToControlTrueType
        return {code = constructor.code
                .. utils.constructor_format( fmt, subst, env.label),out=out}
    end
    local function booleanToControlFalseType( constructor)
        local env = getCallableEnvironment()
        local out = env.label()
        local subst = {inp=constructor.out, out=out}
        local fmt = llvmir.control.booleanToControlFalseType
        return {code = constructor.code
                .. utils.constructor_format( fmt, subst, env.label),out=out}
    end

    typedb:def_reduction( controlTrueType, scalarBooleanType,
                booleanToControlTrueType, tag_typeDeduction, rwd_control)
    typedb:def_reduction( controlFalseType, scalarBooleanType,
                booleanToControlFalseType, tag_typeDeduction, rwd_control)

    local function negateControlTrueType( this)
        return {type=controlFalseType, constructor=this.constructor}
    end
    local function negateControlFalseType( this)
        return {type=controlTrueType, constructor=this.constructor}
    end
    local function joinControlTrueTypeWithBool( this, arg)
        local out = this.out
        local subst = {inp=arg[1].out, out=out}
        local fmt = llvmir.control.booleanToControlTrueType
        local label_allocator = getCallableEnvironment().label
        local code2 = utils.constructor_format( fmt, subst, label_allocator)
        return {code=this.code .. arg[1].code .. code2, out=out}
    end
    local function joinControlFalseTypeWithBool( this, arg)
        local out = this.out
        local subst = {inp=arg[1].out, out=out}
        local fmt = llvmir.control.booleanToControlFalseType
        local label_allocator = getCallableEnvironment().label
        local code2 = utils.constructor_format( fmt, subst, label_allocator)
        return {code=this.code .. arg[1].code .. code2, out=out}
    end
    defineCall( controlTrueType, controlFalseType, "!", {}, nil)
    defineCall( controlFalseType, controlTrueType, "!", {}, nil)
    defineCall( controlTrueType, controlTrueType, "&&",
            {scalarBooleanType}, joinControlTrueTypeWithBool)
    defineCall( controlFalseType, controlFalseType, "||",
            {scalarBooleanType}, joinControlFalseTypeWithBool)

    local function joinControlFalseTypeWithConstexprBool( this, arg)
        if arg == false then
            return this
        else
            local env = getCallableEnvironment()
            local subst = {out=this.out}
            local fmt = llvmir.control.terminateTrueExit
            return {code = this.code
                    .. utils.constructor_format(fmt,subst,env.label), out=this.out}
        end
    end
    local function joinControlTrueTypeWithConstexprBool( this, arg)
        if arg == true then
            return this
        else
            local env = getCallableEnvironment()
            local subst = {out=this.out}
            local fmt = llvmir.control.terminateFalseExit
            return {code = this.code
                    .. utils.constructor_format(fmt,subst,env.label), out=this.out}
        end
    end
    defineCall( controlTrueType, controlTrueType, "&&",
            {constexprBooleanType}, joinControlTrueTypeWithConstexprBool)
    defineCall( controlFalseType, controlFalseType, "||",
            {constexprBooleanType}, joinControlFalseTypeWithConstexprBool)

    local function constexprBooleanToControlTrueType( value)
        local env = getCallableEnvironment()
        local out = label()
        local fmt = llvmir.control.terminateFalseExit
        local code = (value == true)
                and ""
                or utils.constructor_format( fmt, {out=out}, env.label)
        return {code=code, out=out}
    end
    local function constexprBooleanToControlFalseType( value)
        local env = getCallableEnvironment()
        local out = label()
        local fmt = llvmir.control.terminateFalseExit
        local code = (value == false)
                and ""
                or utils.constructor_format( fmt, {out=out}, env.label)
        return {code=code, out=out}
    end
    typedb:def_reduction( controlFalseType, constexprBooleanType,
                constexprBooleanToControlFalseType, tag_typeDeduction, rwd_control)
    typedb:def_reduction( controlTrueType, constexprBooleanType,
                constexprBooleanToControlTrueType, tag_typeDeduction, rwd_control)

    local function invertControlBooleanType( this)
        local out = getCallableEnvironment().label()
        local subst = {inp=this.out, out=out}
        local fmt = llvmir.control.invertedControlType
        return {code = this.code
                    .. utils.constructor_format( fmt, subst), out = out}
    end
    typedb:def_reduction( controlFalseType, controlTrueType,
                    invertControlBooleanType, tag_typeDeduction, rwd_control)
    typedb:def_reduction( controlTrueType, controlFalseType,
                    invertControlBooleanType, tag_typeDeduction, rwd_control)

    definePromoteCall( controlTrueType, constexprBooleanType, controlTrueType,
                    "&&", {scalarBooleanType}, constexprBooleanToControlTrueType)
    definePromoteCall( controlFalseType, constexprBooleanType, controlFalseType,
                    "||", {scalarBooleanType}, constexprBooleanToControlFalseType)
end

Control Structures

The last snippet implements the function conditionalIfElseBlock( node, condition, matchblk, elseblk, exitLabel) that is doing the work for the AST node functions implementing the if with or without the else. If we have an else then we have to branch to the end and bind the unbound label of the control true type. This is equivalent to turning the control true type to a control false type before adding the else block.

Lua
-- Build a conditional if/elseif block
function conditionalIfElseBlock( node, condition, matchblk, elseblk, exitLabel)
    local cond_constructor
        = getRequiredTypeConstructor( node, controlTrueType, condition,
                        tagmask_matchParameter, tagmask_typeConversion)
    if not cond_constructor then
        local declstr = typedb:type_string(condition.type)
        utils.errorMessage( node.line, "Can't use type '%s' as condition", declstr)
    end
    local code = cond_constructor.code .. matchblk.code
    if exitLabel then
        local subst = {inp=cond_constructor.out, out=exitLabel}
        local fmt = llvmir.control.invertedControlType
        code = code .. utils.template_format( fmt, subst)
    else
        local subst = {inp=cond_constructor.out}
        local fmt = llvmir.control.label
        code = code .. utils.template_format( fmt, subst)
    end
    local out
    if elseblk then
        code = code .. elseblk.code
        out = elseblk.out
    else
        out = cond_constructor.out
    end
    return {code = code, out = out}
end

Build and Run the Compiler

Finally, we build and run our compiler on the example source presented at the beginning.

Translate the grammar and build the Lua script of the compiler
LUABIN=`which lua`
. examples/intro/luaenv.sh

mewa -b "$LUABIN" -g -o build/tutorial.compiler.lua examples/intro/grammar.g
chmod +x build/tutorial.compiler.lua
Run the compiler front-end on a test program
build/tutorial.compiler.lua -o build/program.llr examples/intro/program.prg
Inspect the LLVM IR code
less build/program.llr 
Create an object file
llc -relocation-model=pic -O=3 -filetype=obj build/program.llr -o build/program.o
Create an executable
clang -lm -lstdc++ -o build/program build/program.o
Run the executable file
build/program

Output

Salary sum: 280720.00

What is Missing

This article showed the implementation of a primitive language missing lots of features. Here is a list:

  • Constructors implementing late binding, e.g. for implementing copy elision.
  • More type qualifiers like const, private, etc.
  • Pointers
  • Dynamic memory allocation
  • Exceptions
  • Generics
  • Lambdas
  • Coroutines

And many more. You can visit the FAQ to get an idea, how to implement a richer language. You can dig into the main example language1 that implements most of the features missing here as examples.

Improvements

When reading through this article, I saw that I was acting against my advice. In both example languages, the context is passed as an argument in the tree traversal. The context would better be defined bound to its scope. This is a good example of not taking the code presented here literally.

You should not consider the examples presented here as a code-base for your compiler project. The examples, together with the FAQ can help you planning your compiler project though. With a layout, you can do a much better job than me. I was cutting my way through the jungle with a machete. You have the overview.

Conclusion

We have seen how a very primitive compiler is written in Lua using Mewa. We could compile and run a simple demo program in the shell.

I hope I could give you some overview about one way to write a compiler front-end. Learning about another approach can be interesting, even if you go along another path.

Mewa is based on very old ideas and offers nothing fundamentally new. But it is a pragmatic approach that brings the implementation of a prototype of a non-trivial compiler front-end for a single person within reach.

Links

License

This article, along with any associated source code and files, is licensed under The MIT License


Written By
Europe Europe
I am a software engineer living in Zürich.
My main interests are information retrieval, document processing, compiler building, formal languages and domain specific languages.

Comments and Discussions

 
QuestionNice work Pin
jeffie10010-Jun-21 4:26
jeffie10010-Jun-21 4:26 
NewsSmall fix Pin
Patrick P. Frey3-Jun-21 23:06
Patrick P. Frey3-Jun-21 23:06 
The lexer of the grammar introduced here accepts tokens like 123AB as 123 followed by AB.
The following 3 lexeme definitions at the end of the lexeme definition list will fix that:

ILLEGAL : '[0123456789]+[A-Za-z_]';
ILLEGAL : '[0123456789]*[.][0123456789]+[A-Za-z_]';
ILLEGAL : '[0123456789]*[.][0123456789]+[Ee][+-]{0,1}[0123456789]+[A-Za-z_]';

ILLEGAL is not a keyword here. It defines a lexeme with the name ILLEGAL that is not referenced anywhere. The error message created as a consequence is quite informative and acceptable in a prototype.

I won't make an update of the article for this small fix. I added it to the examples in the master branch of Mewa.

modified 5-Jun-21 4:49am.

Praiseit will be great Pin
Southmountain27-May-21 14:42
Southmountain27-May-21 14:42 
GeneralRe: it will be great Pin
Patrick P. Frey27-May-21 22:40
Patrick P. Frey27-May-21 22:40 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.