Re: Speed of COM - COM Discussion Boards

Vi210-Jul-03 3:09

10-Jul-03 3:09

Yes, of course. Your new component should have the same CLSID (or ProgID, translated into necessary CLSID) and the same set of interfaces as the old DLL-component.

There is a "location transparency" rule in COM. Look at MSDN for more information about this.

With best wishes,
Vita

Re: in-proc ==>> Out-of-proc

In-At14-Jul-03 20:01

In-At

14-Jul-03 20:01

Thanks. I am facign following trouble:

Create a COM component "InProcVB.dll" as in-proc DLL in VB exposing some interfaces and methods .

Write its client as "clientVB".

Write another COM component as "OutOfProc.exe" as out-of-proc exe server in VC. This has same

interface/class/InterfaceIDs/ClassIDs as that of "InProcVB.dll". This is written with purpose of

replacing "InProcVB.dll". And, the expectation is that client need not re-compile. (As defined by

rule "Location transparency of COM).

After developing "OutOfProc.exe", we unregistered "InProcVB.dll", and registered "OutOfProc.exe".

Executed "clientVB" without any change. It gave error type-mismatch. The error point was:

Dim objSrvClass as SrvClass

set SrvClass = CreateObject("Server.Class") --> Problem: Type mismatch.

If I change code as

Dim objSrvClass as Object

set SrvClass = CreateObject("Server.Class")

It works well.

Please suggest.

Re: in-proc ==>> Out-of-proc

Vi215-Jul-03 2:29

Vi2

15-Jul-03 2:29

I have no problem at all.

I made the VB's Server.dll, VC's Server.exe and testing Project1.exe. Tested object has one method xxx in VB server

Public Sub xxx()
  MsgBox "xxx subroutine is called"
End Sub

and in VC server

STDMETHODIMP CClass::xxx()
{
	// TODO: Add your implementation code here
	MessageBox(NULL,"ATL xxx is called", "ATL", MB_OK);
	return S_OK;
}

and testing code in Project1 project

Sub Main()
  Dim x As Server.Class
  Set x = CreateObject("Server.Class")
  x.xxx
End Sub

When i register some COM server, I have relevant message: if VB, then VB, if VC, then VC. I.e.

>regsvr32 Server.dll
>Project1.exe
Having ... xxx subroutine is called
>regsvr32 /u Server.dll
>Server.exe -RegServer
>Project1.exe
Having ... ATL xxx is called
>Server.exe -UnRegServer

There is no magic. It's possible that you have a mistake. I also firstly made a mistake - I have mixed up the coclass and interface IDs. And I had "Type mismatch" Smile | :)

With best wishes,
Vita

Re: in-proc ==>> Out-of-proc

In-At15-Jul-03 2:42

In-At

15-Jul-03 2:42

Thanks for your efforts. Can you please send us the code of both VB and VC server and client samples that you have written?
This will help us in locating problem at our end.

Regards.

Speed of COM

Jo Fredrickson6-Jul-03 21:02

Jo Fredrickson

6-Jul-03 21:02

Just wondering if anyone has done any study into the speed of COM? In particular, a comparison of the time taken to access a COM object's methods with a locally defined object's methods.

In my application I have put all of the ADO functionality into a COM object, however, it's really slow to query the database (through the COM object) and then display the results. I am considering using a simple C++ class instead, since there is only one application accessing the database anyhow.

Any comments or ideas on this would be really helpfull. Unsure | :~

Re: Speed of COM

In-At6-Jul-03 23:30

In-At

6-Jul-03 23:30

You need to answer following before perfromace measurement:

What is type of your server? out-of-proc/in-proc?
What interfaces are you using? Dispatch/Dual?
What is the frequency of clietn server interaction?

Re: Speed of COM

In-At6-Jul-03 23:58

In-At

6-Jul-03 23:58

Here are the results of the test, performed on NT4SP3, Pentium Pro 300Mhz, 128Mb RAM, and a 10Base-T network connection:

Early Bound Late Bound Cached
In Process 20 ms 90 ms 80 ms
Out of Proc 1952 ms 5137 ms 2944 ms
Remote 14952 ms 36403 ms 20089 ms

Re: Speed of COM

Jo Fredrickson7-Jul-03 16:03

Jo Fredrickson

7-Jul-03 16:03

Thanks for your test results. Smile | :)

My server is a DLL with proxy/stub merged, with a dispatch interface. The server is always local and in-process. This is the fastest possible configuration, right?

The client-server interaction is fairly high frequency... i think this is my problem. For example, to populate a dialog before it is displayed, the client queries the server to Find() the appropriate record (ADO to an Access DB), then the client uses separate calls to retrieve each field (about 10 fields). The server is not doing much work here, just returning global variables that were set during the previous Find() method.

My customer requires this to run on a pre-pentium machine, 100MHz, 24Mb RAM, Win 98. Of course, on my development beast, the screen updates instantly, but the customer machine takes about 7 seconds (yuk Dead | X|

)

Do you think it's the COM component slowing it down? Confused | :confused:

Re: Speed of COM

In-At7-Jul-03 19:59

In-At

7-Jul-03 19:59

The solution for this is that you should club separate calls into a single call. For example:
Suppose you have a collection of 100 items, and collection's object has 4 attributes each. To display all the properties, your client is doing something like this:

For each item of collection:
{
Get object
get first prop of object
get second prop of object
get third prop of object
get fourth prop of object
}

So, you are making 5 *100 = 500 calls to COM server. Instead you should define prototype like this:

Collection->GetAllproperties([out] Variantarray)

So, single call to COM server will achieve this.

Regards.

Re: Speed of COM

Mike Dimmick12-Jul-03 8:10

Mike Dimmick

12-Jul-03 8:10

As long as the threading model of the thread matches that of the component, there shouldn't be any proxy/stub work going on, and the call into the component is just a virtual function call, which isn't much more costly than a non-virtual call.

If both parts (client and component) are written in C++, or if the client is VB6, try to ensure that your component exposes a vtable interface as well as the dispatch interface - a dual interface, as it's known. This is basically a custom interface derived from IDispatch, so that callers which can early bind do so, while late-binding callers aren't shut out.

If the threading model of the component doesn't match the threading model of the caller, COM will introduce a proxy and stub to marshal between the caller and the component within the thread. This is less costly than having the component as a local server process, but more costly than a plain call.

This might happen if your component is marked 'Free' but your client is either VB6, or calls CoInitialize or CoInitializeEx( NULL, COINIT_APARTMENTTHREADED ); to initialise COM from C++. If the component is marked 'Both', it will behave as if you'd specified 'Apartment' if the thread that created it runs in the Single-Threaded Apartment (conditions as above), or 'Free' if the creator runs in the Multi-Threaded Apartment.

I suspect, though, that your database accesses are what's killing you. Measure the actual performance of Access on that system configuration. It's going to be sluggish - indeed with only 24Mb of RAM, it's likely to be constantly swapping.

Generally it's a good idea to compile your app with the 'Minimize Size' compiler options - in VB, this is Project Properties > Compile tab > select Compile to Native Code and Optimize for Small Code.

In VC 6.0, I use the /Oxs option - full optimization, favor small code - and the /Og option - global optimizations. I also use /Gy (enable function-level linking) and specify /OPT:REF to the linker (Remove unreferenced functions). This last is the default, but it gets turned off if you generate debugging information for the release build, which I do. Specifying /OPT:WIN98 might improve your startup time on Windows 98.

Doing this can reduce your code size, which can reduce the number of page faults you take.

You could also try using a profiler to find out where the hotspots are. The Win32 SDK contains a tool called the Call Attributed Profiler, or CAP.

--
Mike Dimmick

Re: Speed of COM

Jo Fredrickson14-Jul-03 18:05

Jo Fredrickson

14-Jul-03 18:05

Thanks Mike, for such a detailed response!

I have been working through each of your points.

My COM objects and the exe use apartment threading, and a dual interface.
(All of the components are written in VC++).

The exe initialises COM with ...

struct InitOle {
InitOle() { ::CoInitialize(NULL); }
~InitOle() { ::CoUninitialize(); }
} _init_InitOle_;

And then creates the COM objects with ...

CoCreateInstance( CLSID_SubstrateMgr,
NULL,
CLSCTX_INPROC_SERVER,
IID_ISubstrateMgr,
(void **) &g_pSubstrateMgr);

Is this the fastest method?

I have used all of the optimisation settings you suggested, although I can't see any noticable difference.
I believe you are right about the database access being the trouble spot. If the COM calls aren't that much worse than a function call, I can leave my COM interfaces alone and focus on the database access.

Thanks again for your help.
Jo Smile | :)

Re: Speed of COM

Gerald Schwab20-Jul-03 17:23

Gerald Schwab

20-Jul-03 17:23

Keep in mind that ADO is dog slow. Use OLEDB directly and you will see 2-3 times perfomance increase. Example: I created an ASP page that used ADO to return a simple recordset(SELECT TOP 50 FROM TABLE1) and loop through the recordset to generate an HTML table. Then I wrote a C++ COM object that that accessed OLEDB directly instead of ADO from my ASP page. Then I used ATL Server and my C++ COM object.

Here's what I found:
1) ASP/ADO - 70 requests/sec
2) ASP/C++ COM/OLEDB - 290 request/sec
3) ATL Server/C++ COM/OLEDB - 370 request/sec.

The problem with ADO is that everything is a VARIANT so it can be easily used by scripting clients. OLEDB is meant to be used by compiled/early bound languages.

ATL Control sinks

Ancient Dragon4-Jul-03 3:32

Ancient Dragon

4-Jul-03 3:32

I ported Mario Zucca's grid control to WinCE using eVC++ 3.0 compiler, but making it a Full Control to that it can be easily used in c++ MFC programs like any other ActiveX control. All that went without very many problems -- except being able to fire events. So I just copied the code to do that into my project and it seemed to work.

Then I created a test C++ MFC Dialog-based program, added the control and using ClassWizzard created the events that were exposed and explained above. That too seemed to work. However, When the control attempts to fire the event, it cannot because it doesn't realize that it has any client containers!

For example: m_vec.GetSize(); always returns 0. Does anyone know how to fix this problem?

<br />
	HRESULT Fire_BeforeEdit(INT Row, INT Col, VARIANT_BOOL * Cancel)<br />
	{<br />
		CComVariant varResult = VT_EMPTY;<br />
		T* pT = static_cast<T*>(this);<br />
		int nConnectionIndex;<br />
		CComVariant* pvars = new CComVariant[3];<br />
<br />
    //************ This line always returns 0 ***************<br />
		int nConnections = m_vec.GetSize();<br />
<br />
<br />
		for (nConnectionIndex = 0; nConnectionIndex < nConnections; nConnectionIndex++)<br />
		{<br />
			pT->Lock();<br />

Accessing COM objects

Moonspellwizard3-Jul-03 19:44

Moonspellwizard

3-Jul-03 19:44

Hello!

Can I access COM object from java?

Thanks

Re: Accessing COM objects

In-At3-Jul-03 20:17

In-At

3-Jul-03 20:17

EZ JCom lets you call COM objects from Java. Check http://www.ezjcom.com/

ADO

Anthony98873-Jul-03 9:51

Anthony9887

3-Jul-03 9:51

I would like to create a COM object with all my ADO methods. I then would like to have Visual Basic pass a recordset pointer to my COM DLL. Is this possible? If so how would I go about it?

Thanks

Re: ADO

Anonymous3-Jul-03 11:51

Anonymous

3-Jul-03 11:51

Hi itz possible,

you implement all the ADO classes into your class. Take a template

Implements {ADOCLASSNAME}

then... call the ado object.

I dont why you want to call all this.

Best of Luck

Multiple instances are launched

In-At2-Jul-03 20:42

In-At

2-Jul-03 20:42

We have written an ou-of-proc, Free threaded, ATL server.

When 4 web users call this server for 5-6 hours, this server hangs, and a new instance of the server is launched in the memory. And the new server also not responds to user calls.

Can somebody tell me the possible cause of this trouble?

In-proc to out-of-proc

In-At2-Jul-03 20:19

In-At

2-Jul-03 20:19

I have soem queries regarding component versioning.

I had a component named "Old_Component" exposed as an STA, out-of proc COM server, developed in VC++. This is wrapped by another component "Old_Component_Wrapper" which is in-proc COM server and exposed to client.

Now we are planning to provide new version of our product.

In new version, we are thinking of removing the wrapper layer. That is we want to expose "Old_Component" to client instead of "Old_Component_Wrapper". Can you tell me is this possible? Or what can be the possible issues in doing this?

Re: In-proc to out-of-proc

valikac3-Jul-03 7:39

valikac

3-Jul-03 7:39

Yes, it is possible. All you are doing is taking a contained or aggregated server and making it an independent out-proc server.

Kuphryn

Re: In-proc to out-of-proc

In-At3-Jul-03 19:54

In-At

3-Jul-03 19:54

Thanks for your reply. I have a further query:

What shall happen to the clients who were using "Old_Component_Wrapper(DLL)" server? Shall they be able to use new "Old_Component(EXE)" without any change in their code??

Re: In-proc to out-of-proc

valikac4-Jul-03 5:00

valikac

4-Jul-03 5:00

I am not familiar with out-proc COM server. My thought is that the out-proc COM server will be a new version or even an entirely different server from the old one. Yes, the clients will have to change their code.

Kuphryn

Helpppppp!

safee ullah2-Jul-03 20:07

safee ullah

2-Jul-03 20:07

hi..

can someone plz tell me from where can i get a sample OLE control with automation supported..

thanks..

kindest regards

help!!,there are some errors in my program

yingkou2-Jul-03 3:35

yingkou

2-Jul-03 3:35

I want to register a component to regitry(the component is not realized,I just want to practise the procedure ).my code is bellow:
HKEY hKey;
char szKeyBuf[512]="first key";
const char* szValue="first key";
LPTSTR class_name="first class";
long lResult = ::RegCreateKeyEx(HKEY_CLASSES_ROOT, szKeyBuf, 0, class_name,
REG_OPTION_NON_VOLATILE, KEY_ALL_ACCESS, NULL, &hKey, NULL);
if(lResult != ERROR_SUCCESS)
{
cout<<"Error Happened"<<"\n";
cout<

remote connection to server

satishsilla2-Jul-03 2:59

satishsilla

2-Jul-03 2:59

hello,
i wrote a EXE server using ATLCOMwizard in VC++6.0.the server was successfully registered
in my machine. here i used custom interfaces of mine.
now i have to create client to test that. help me to create client.

And also remote clients could able to instanceiate the server and use the interfaces.for that what should i do to fullfill the requirements.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.