|
Here it is.
public static bool RunForTheDay(bool IsTheJobWeekly, bool IsTheJobMonthly, bool IsTheJobYearly,
int WhatDayOfMonthJobRuns, int WhatWeekOfMonthJobRuns, int WhatMonthOfYearJobRuns,
int WhatDayOfYearJobRuns, bool RunForTheDay, string strDayOfTheWeek)
{
bool retRunForTheDay = false;
//string strDayOfTheWeek = DateTime.Now.ToString("dddd");
if (IsTheJobYearly)
{
if (WhatDayOfYearJobRuns > 0)
{
if (WhatDayOfYearJobRuns == DateTime.Now.DayOfYear)
retRunForTheDay = true;
}
else if ((WhatMonthOfYearJobRuns > 0) && (WhatMonthOfYearJobRuns == DateTime.Now.Month))
{
if ((WhatDayOfMonthJobRuns > 0) && (WhatDayOfMonthJobRuns == DateTime.Now.Day))
{
retRunForTheDay = true;
}
else if (WhatWeekOfMonthJobRuns > 0)
{
int tempWeekOfTheMonth = GetWeekOfMonth(DateTime.Now);
if ((tempWeekOfTheMonth == WhatWeekOfMonthJobRuns) && RunForTheDay)
retRunForTheDay = true;
}
}
}
else if (IsTheJobMonthly)
{
if ((WhatDayOfMonthJobRuns > 0) && (WhatDayOfMonthJobRuns == DateTime.Now.Day))
{
retRunForTheDay = true;
}
else if (WhatWeekOfMonthJobRuns > 0)
{
int tempWeekOfTheMonth = GetWeekOfMonth(DateTime.Now);
if ((tempWeekOfTheMonth == WhatWeekOfMonthJobRuns) && RunForTheDay)
retRunForTheDay = true;
}
}
else
{
retRunForTheDay = RunForTheDay;
}
return retRunForTheDay;
}
public static int GetWeekOfMonth(DateTime date)
{
DateTime beginningOfMonth = new DateTime(date.Year, date.Month, 1);
while (date.Date.AddDays(1).DayOfWeek != CultureInfo.CurrentCulture.DateTimeFormat.FirstDayOfWeek)
date = date.AddDays(1);
return (int)Math.Truncate((double)date.Subtract(beginningOfMonth).TotalDays / 7f) + 1;
}
Thanks,
Abdul Aleem
"There is already enough hatred in the world lets spread love, compassion and affection."
|
|
|
|
|
I have a fairly simple VB.Net application which I wrote a few years ago to chart weather observations. It uses two DateTimePicker controls to specify the date/time range of the data to be charted and had been working fine, once I got a few initial minor bugs sorted out. I don't use it that often (perhaps once every 3-6 months), so I don't know when the behavior I am about to describe started. A couple of days ago, I ran the application, and, instead of defaulting to displaying the beginning and end of the most recent 24 hours for which data was available (e.g. 04/18/2017 12:23), both controls displayed only the delimiter characters (// : ). The values of the fields were apparently correct - choosing a data set and pressing the 'plot' button produced the expected plot of 24 hours' data - but the datetimepicker controls didn't 'work'.
Debugging with Visual Studio confirmed that the contents of all the variables were as expected, but the controls still looked (differently!) weird in the running program, although they looked as they should in design view. Running under Visual Studio, the controls sort of worked, but with an enormous amount of horizontal space (and no delimiters) between each subfield (month, day, year, minutes, seconds), so that only one or at most two subfields were in view at a time.
Has anyone seen anything like this and/or does anyone know what may be going on.
|
|
|
|
|
There was a similar question posted yesterday, but I cannot recall where it was (can't find it in the obvious places). Someone suggested checking the code to see if some control information is being garbage collected early.
[edit]
Found it in the C++ forum: CDateTimeCtrl in Windows 10 - C / C++ / MFC Discussion Boards[^], but not sure if that helps.
[/edit]
|
|
|
|
|
Thanks for the pointer. As you imply, though, other than reassuring me that 'I am not alone', the C++ thread doesn't seem to help. The OP in that thread seems to have seen the problem just after applying the Win 10 Creators Update, which is when I, too, saw it, but I can't imagine why a change in garbage collection could be relevant in my case. I will look again at the code with that potential issue in mind, but I doubt if I will find anything.
[edit]
I have looked at the code. It is a single Form Application and there is nothing even remotely related to the problematic DateTimePickers that should be going out of scope unless/until the Form is closed.
[/edit]
modified 19-Apr-17 11:01am.
|
|
|
|
|
Unfortunately I cannot get the latest Windows update on my system, so cannot test the issue.
|
|
|
|
|
A "few years ago" I was running XP ... .NET something ... and probably a VGA monitor.
Now I run .NET 4.6.1; HDMI monitors; Windows 8.1 / 10; no XP "themes"; new default "font families"; etc.
Most certainly I had to "tweak" my UI's moving forward.
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
|
|
|
|
|
And your point is?!
If you had read the second paragraph in my original post, let alone the thread that Richard pointed to, you would have seen that almost the first thing I (and the OP in the other thread) did was to go back and rebuild the application, which (at least in my case) only uses standard, current, controls, and determine that the controls in the rebuilt application also showed the strange behavior.
This is not a "the application I created in 2005 doesn't run unchanged under Windows 10" issue.
|
|
|
|
|
You seem mystified by behaviour that I have found typical moving from one "configuration" to another.
You seem to imply you have lived with the same hardware and software all this time and "somehow" have now suddenly gone "nuts".
While pointing me to a C++ forum while your app is VB.NET.
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
|
|
|
|
|
Our experiences apparently differ. In general, I have found that .Net applications, and particularly their standard controls, almost always continue to work as expected through hardware and software upgrades, so long as the Framework version that they require is still present on the new system. On the very rare occasions when I have seen a problem with an old compiled application on a new system, this has always been corrected by rebuilding the application on/for the new system.
The C++ thread is at least arguably relevant because the apparently very similar problems that both threads describe is in a standard control which is part of the Framework, rather than in user code, strengthening (IMHO) the concern that the problem is one recently introduced into the Framework rather than 'user error'.
|
|
|
|
|
The (Windows Forms) Date Time Picker has been around since 1.1; initially, as a Windows "common dialog" control; so, no, it was not always "standard".
(You were not clear on what version of .NET you first developed on; or even what OS).
And any number of properties are "obsoleted" from one version to the next; and new ones introduced. I'm not convinced there may not be "some" impact somewhere.
It's those "cosmetic" changes (by the vendor) that bite you.
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
|
|
|
|
|
As per the other discussion looks like Windows has made a structural change which is perfectly normal.
You should be able to go around the problem by just using Windows API. The other guy with the problem said he was losing the last word but I am pretty sure that is because he didn't have enough room in the box for the wording because the font was obviously slightly different spacing. I told him about using the negative height which forces absolute height selection of font and gives windows no latitude to play with it. I don't know what parameters the original MFC code used in selecting a suitable font but you just need to work it out.
WM_SETFONT should and must work because it is an API message if it doesn't work correctly it would be given a high priority to fix from Microsoft because it could effect any and every program.
This should not be a big issue to fix. Using frameworks makes things easier the penalty is sometimes things can change in the Windows API that break the frameworks. The alternatively would be Microsoft not ever be allowed to change anything which as one of your comments already says this stuff has changed multiple times over the years already.
In vino veritas
|
|
|
|
|
Hi,
Got a scenario: we have ASMX web services and we auto-test the service with the help of Soap UI Tool (by SmartBear) every night after launching a new build which also happens every night after merging all the latest changes in the TFS source codes. In the process of test step’s execution, some test step gets failed due to mismatch in test parameter values; this mismatch might be due to change in the values in the source code and check-in by the developer. Some test step gets failed due to null reference and some due to mismatch in testing value stored in sqlserver database. When we try to find the reason of failed test step, it’s a time consuming task every day to find the change-set which caused the failure. Therefore, we want to automate the process to get the change-set for the failed test steps. Here, looking for your expert suggestion for developing a solution for the same.
Please let me know in case you need further clarification.
Thank you
Thank you
JP
|
|
|
|
|
A time consuming process? What, you mean debugging the code? Yeah, you're not going to automate that process.
|
|
|
|
|
Hi Dave,
Soap UI tool generates log file after each execution. To know the reason for the failure, we go through log file. Log file does not have a proper stack trace with filename, methodname, line number etc for the failed test rather the generic reason for the failure of the test step. So, we have to debug the application for the failed method and this process takes a good amount of time to debug and find the bug. Hope it clarifies the question.
Thanks
|
|
|
|
|
In this case, I agree with Pete. You're not going to be able to write code to automatically find which check in caused the problem. You could even have multiple problems.
You have two possible paths here. The first is to debug the code and do what you've been doing. This is, obviously, time consuming and reactionary.
The other is to implement a check in process where the code is tested before you allow it to be checked in. It sounds like you've got people "breaking the build" on just about every check in. That's not tolerable and must be prevented. Yeah, it sounds like it's more time to do this. It is but instead of spending that time on finding and fixing the bug you're spending it on preventing the bugs and improving the quality of the code.
|
|
|
|
|
Thank you, Dave.
Yes, I too thinking about implementing Unit Test part for resolving such problem.
|
|
|
|
|
Member 1263842 wrote: find the change-set which caused the failure.
Since you check in code every day and run this every night then the change-set that caused the error is one of the ones from that day. I guess I don't quite follow what you are asking.
There are two kinds of people in the world: those who can extrapolate from incomplete data.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
If I were in your team, I would suggest that you would be better off with a comprehensive CI process with decent unit tests and pre-flight check ins to ensure that you don't regularly commit broken code.It's better to prevent problems than look to apportion blame.
This space for rent
|
|
|
|
|
Thank you, Pete for your suggestion.
|
|
|
|
|
You're welcome.
This space for rent
|
|
|
|
|
It seems to me that you could tackle this in one of two ways: (1) Finer granularity on your build process. Somebody else already suggested a full-blown CI solution, but you could (I suppose) build say 4 times per day, which would dice-up the problem and presumably help; (2) Semi-automate the debug process by correlating changed modules with locations where errors are arising.
Option 1 requires that you can get those merges done more often and turn the build handle. Option 2 strikes me as a good thing to do anyway, but whether it adds much value will obviously depend on how "orthogonal" the changes are that people are making to the code: if many are making changes in the same few files then it's not really going to work.
|
|
|
|
|
Thank you, Nick for sharing your thought.
Which part of build process, I should focus?
Yes, there is possibility of multiple check-ins on a file.
|
|
|
|
|
By "finer granularity" I meant only that you could build more frequently. For example if currently you build at (say) midnight each day after everybody has finished work, then if Module "X" was changed 3 times and now fails to compile you've got to figure out which change caused it to fail. If, however, you'd done several builds during the day (e.g. every 2 hours) then you have more chance of discovering a broken build for which only one checkin has been done.
Taking this to an extreme you end up with CI = Continuous Integration in which typically there'll be a gate on the checkin process with some mandatory regression tests needing to be passed before checkin can be done. There are lots of ways to implement this in practice: you could allow checkin but advance a stable label only as each checkin is built and validated. In the ideal world CI should ensure that your code always builds. However this is a big topic which is why I suggested only a small change to your existing process rather than a fundamental change of strategy.
Do you know Jenkins? If not, it's worth reading about, including Jenkins CI.
|
|
|
|
|
|
how to disable VS 2017 autocorrect? i'm designing unity3d and when i try create new function, the autocorrect is very disturbing.
can anybody tell me how to disabling it?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
